]>
Commit | Line | Data |
---|---|---|
83d290c5 | 1 | // SPDX-License-Identifier: GPL-2.0 |
edd15fcf MV |
2 | /* |
3 | * Device Tree Source for the Porter board | |
4 | * | |
5 | * Copyright (C) 2015 Cogent Embedded, Inc. | |
edd15fcf MV |
6 | */ |
7 | ||
8 | /* | |
9 | * SSI-AK4642 | |
10 | * | |
11 | * JP3: 2-1: AK4642 | |
12 | * 2-3: ADV7511 | |
13 | * | |
14 | * This command is required before playback/capture: | |
15 | * | |
16 | * amixer set "LINEOUT Mixer DACL" on | |
17 | */ | |
18 | ||
19 | /dts-v1/; | |
20 | #include "r8a7791.dtsi" | |
21 | #include <dt-bindings/gpio/gpio.h> | |
22 | ||
23 | / { | |
24 | model = "Porter"; | |
25 | compatible = "renesas,porter", "renesas,r8a7791"; | |
26 | ||
27 | aliases { | |
28 | serial0 = &scif0; | |
29 | }; | |
30 | ||
31 | chosen { | |
32 | bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; | |
33 | stdout-path = "serial0:115200n8"; | |
34 | }; | |
35 | ||
36 | memory@40000000 { | |
37 | device_type = "memory"; | |
38 | reg = <0 0x40000000 0 0x40000000>; | |
39 | }; | |
40 | ||
41 | memory@200000000 { | |
42 | device_type = "memory"; | |
43 | reg = <2 0x00000000 0 0x40000000>; | |
44 | }; | |
45 | ||
46 | vcc_sdhi0: regulator-vcc-sdhi0 { | |
47 | compatible = "regulator-fixed"; | |
48 | ||
49 | regulator-name = "SDHI0 Vcc"; | |
50 | regulator-min-microvolt = <3300000>; | |
51 | regulator-max-microvolt = <3300000>; | |
52 | regulator-always-on; | |
53 | }; | |
54 | ||
55 | vccq_sdhi0: regulator-vccq-sdhi0 { | |
56 | compatible = "regulator-gpio"; | |
57 | ||
58 | regulator-name = "SDHI0 VccQ"; | |
59 | regulator-min-microvolt = <1800000>; | |
60 | regulator-max-microvolt = <3300000>; | |
61 | ||
62 | gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; | |
63 | gpios-states = <1>; | |
64 | states = <3300000 1 | |
65 | 1800000 0>; | |
66 | }; | |
67 | ||
68 | vcc_sdhi2: regulator-vcc-sdhi2 { | |
69 | compatible = "regulator-fixed"; | |
70 | ||
71 | regulator-name = "SDHI2 Vcc"; | |
72 | regulator-min-microvolt = <3300000>; | |
73 | regulator-max-microvolt = <3300000>; | |
74 | regulator-always-on; | |
75 | }; | |
76 | ||
77 | vccq_sdhi2: regulator-vccq-sdhi2 { | |
78 | compatible = "regulator-gpio"; | |
79 | ||
80 | regulator-name = "SDHI2 VccQ"; | |
81 | regulator-min-microvolt = <1800000>; | |
82 | regulator-max-microvolt = <3300000>; | |
83 | ||
84 | gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; | |
85 | gpios-states = <1>; | |
86 | states = <3300000 1 | |
87 | 1800000 0>; | |
88 | }; | |
89 | ||
90 | hdmi-out { | |
91 | compatible = "hdmi-connector"; | |
92 | type = "a"; | |
93 | ||
94 | port { | |
95 | hdmi_con: endpoint { | |
96 | remote-endpoint = <&adv7511_out>; | |
97 | }; | |
98 | }; | |
99 | }; | |
100 | ||
101 | x3_clk: x3-clock { | |
102 | compatible = "fixed-clock"; | |
103 | #clock-cells = <0>; | |
104 | clock-frequency = <148500000>; | |
105 | }; | |
106 | ||
107 | x16_clk: x16-clock { | |
108 | compatible = "fixed-clock"; | |
109 | #clock-cells = <0>; | |
110 | clock-frequency = <74250000>; | |
111 | }; | |
112 | ||
113 | x14_clk: audio_clock { | |
114 | compatible = "fixed-clock"; | |
115 | #clock-cells = <0>; | |
116 | clock-frequency = <11289600>; | |
117 | }; | |
118 | ||
119 | sound { | |
120 | compatible = "simple-audio-card"; | |
121 | ||
122 | simple-audio-card,format = "left_j"; | |
123 | simple-audio-card,bitclock-master = <&soundcodec>; | |
124 | simple-audio-card,frame-master = <&soundcodec>; | |
125 | ||
126 | simple-audio-card,cpu { | |
127 | sound-dai = <&rcar_sound>; | |
128 | }; | |
129 | ||
130 | soundcodec: simple-audio-card,codec { | |
131 | sound-dai = <&ak4642>; | |
132 | clocks = <&x14_clk>; | |
133 | }; | |
134 | }; | |
135 | }; | |
136 | ||
137 | &extal_clk { | |
138 | clock-frequency = <20000000>; | |
139 | }; | |
140 | ||
141 | &pfc { | |
142 | scif0_pins: scif0 { | |
143 | groups = "scif0_data_d"; | |
144 | function = "scif0"; | |
145 | }; | |
146 | ||
147 | ether_pins: ether { | |
148 | groups = "eth_link", "eth_mdio", "eth_rmii"; | |
149 | function = "eth"; | |
150 | }; | |
151 | ||
152 | phy1_pins: phy1 { | |
153 | groups = "intc_irq0"; | |
154 | function = "intc"; | |
155 | }; | |
156 | ||
157 | sdhi0_pins: sd0 { | |
158 | groups = "sdhi0_data4", "sdhi0_ctrl"; | |
159 | function = "sdhi0"; | |
160 | }; | |
161 | ||
162 | sdhi2_pins: sd2 { | |
163 | groups = "sdhi2_data4", "sdhi2_ctrl"; | |
164 | function = "sdhi2"; | |
165 | }; | |
166 | ||
167 | qspi_pins: qspi { | |
168 | groups = "qspi_ctrl", "qspi_data4"; | |
169 | function = "qspi"; | |
170 | }; | |
171 | ||
172 | i2c2_pins: i2c2 { | |
173 | groups = "i2c2"; | |
174 | function = "i2c2"; | |
175 | }; | |
176 | ||
177 | usb0_pins: usb0 { | |
178 | groups = "usb0"; | |
179 | function = "usb0"; | |
180 | }; | |
181 | ||
182 | usb1_pins: usb1 { | |
183 | groups = "usb1"; | |
184 | function = "usb1"; | |
185 | }; | |
186 | ||
187 | vin0_pins: vin0 { | |
188 | groups = "vin0_data8", "vin0_clk"; | |
189 | function = "vin0"; | |
190 | }; | |
191 | ||
192 | can0_pins: can0 { | |
193 | groups = "can0_data"; | |
194 | function = "can0"; | |
195 | }; | |
196 | ||
197 | du_pins: du { | |
198 | groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; | |
199 | function = "du"; | |
200 | }; | |
201 | ||
202 | ssi_pins: sound { | |
203 | groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; | |
204 | function = "ssi"; | |
205 | }; | |
206 | ||
207 | audio_clk_pins: audio_clk { | |
208 | groups = "audio_clk_a"; | |
209 | function = "audio_clk"; | |
210 | }; | |
211 | }; | |
212 | ||
213 | &scif0 { | |
214 | pinctrl-0 = <&scif0_pins>; | |
215 | pinctrl-names = "default"; | |
216 | ||
217 | status = "okay"; | |
218 | }; | |
219 | ||
220 | ðer { | |
221 | pinctrl-0 = <ðer_pins &phy1_pins>; | |
222 | pinctrl-names = "default"; | |
223 | ||
224 | phy-handle = <&phy1>; | |
225 | renesas,ether-link-active-low; | |
226 | status = "okay"; | |
227 | ||
228 | phy1: ethernet-phy@1 { | |
229 | reg = <1>; | |
230 | interrupt-parent = <&irqc0>; | |
231 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; | |
232 | micrel,led-mode = <1>; | |
233 | }; | |
234 | }; | |
235 | ||
236 | &sdhi0 { | |
237 | pinctrl-0 = <&sdhi0_pins>; | |
238 | pinctrl-names = "default"; | |
239 | ||
240 | vmmc-supply = <&vcc_sdhi0>; | |
241 | vqmmc-supply = <&vccq_sdhi0>; | |
242 | cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; | |
243 | wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; | |
244 | status = "okay"; | |
245 | }; | |
246 | ||
247 | &sdhi2 { | |
248 | pinctrl-0 = <&sdhi2_pins>; | |
249 | pinctrl-names = "default"; | |
250 | ||
251 | vmmc-supply = <&vcc_sdhi2>; | |
252 | vqmmc-supply = <&vccq_sdhi2>; | |
253 | cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; | |
254 | status = "okay"; | |
255 | }; | |
256 | ||
257 | &qspi { | |
258 | pinctrl-0 = <&qspi_pins>; | |
259 | pinctrl-names = "default"; | |
260 | ||
261 | status = "okay"; | |
262 | ||
263 | flash@0 { | |
264 | compatible = "spansion,s25fl512s", "jedec,spi-nor"; | |
265 | reg = <0>; | |
266 | spi-max-frequency = <30000000>; | |
267 | spi-tx-bus-width = <4>; | |
268 | spi-rx-bus-width = <4>; | |
269 | m25p,fast-read; | |
270 | ||
271 | partitions { | |
272 | compatible = "fixed-partitions"; | |
273 | #address-cells = <1>; | |
274 | #size-cells = <1>; | |
275 | ||
276 | partition@0 { | |
277 | label = "loader_prg"; | |
278 | reg = <0x00000000 0x00040000>; | |
279 | read-only; | |
280 | }; | |
281 | partition@40000 { | |
282 | label = "user_prg"; | |
283 | reg = <0x00040000 0x00400000>; | |
284 | read-only; | |
285 | }; | |
286 | partition@440000 { | |
287 | label = "flash_fs"; | |
288 | reg = <0x00440000 0x03bc0000>; | |
289 | }; | |
290 | }; | |
291 | }; | |
292 | }; | |
293 | ||
294 | &i2c2 { | |
295 | pinctrl-0 = <&i2c2_pins>; | |
296 | pinctrl-names = "default"; | |
297 | ||
298 | status = "okay"; | |
299 | clock-frequency = <400000>; | |
300 | ||
301 | ak4642: codec@12 { | |
302 | compatible = "asahi-kasei,ak4642"; | |
303 | #sound-dai-cells = <0>; | |
304 | reg = <0x12>; | |
305 | }; | |
306 | ||
307 | composite-in@20 { | |
308 | compatible = "adi,adv7180"; | |
309 | reg = <0x20>; | |
310 | remote = <&vin0>; | |
311 | ||
312 | port { | |
313 | adv7180: endpoint { | |
314 | bus-width = <8>; | |
315 | remote-endpoint = <&vin0ep>; | |
316 | }; | |
317 | }; | |
318 | }; | |
319 | ||
320 | hdmi@39 { | |
321 | compatible = "adi,adv7511w"; | |
322 | reg = <0x39>; | |
323 | interrupt-parent = <&gpio3>; | |
324 | interrupts = <29 IRQ_TYPE_LEVEL_LOW>; | |
325 | ||
326 | adi,input-depth = <8>; | |
327 | adi,input-colorspace = "rgb"; | |
328 | adi,input-clock = "1x"; | |
329 | adi,input-style = <1>; | |
330 | adi,input-justification = "evenly"; | |
331 | ||
332 | ports { | |
333 | #address-cells = <1>; | |
334 | #size-cells = <0>; | |
335 | ||
336 | port@0 { | |
337 | reg = <0>; | |
338 | adv7511_in: endpoint { | |
339 | remote-endpoint = <&du_out_rgb>; | |
340 | }; | |
341 | }; | |
342 | ||
343 | port@1 { | |
344 | reg = <1>; | |
345 | adv7511_out: endpoint { | |
346 | remote-endpoint = <&hdmi_con>; | |
347 | }; | |
348 | }; | |
349 | }; | |
350 | }; | |
351 | }; | |
352 | ||
88306dbb MV |
353 | &i2c6 { |
354 | status = "okay"; | |
355 | clock-frequency = <400000>; | |
356 | }; | |
357 | ||
edd15fcf MV |
358 | &sata0 { |
359 | status = "okay"; | |
360 | }; | |
361 | ||
362 | /* composite video input */ | |
363 | &vin0 { | |
364 | status = "okay"; | |
365 | pinctrl-0 = <&vin0_pins>; | |
366 | pinctrl-names = "default"; | |
367 | ||
368 | port { | |
369 | #address-cells = <1>; | |
370 | #size-cells = <0>; | |
371 | ||
372 | vin0ep: endpoint { | |
373 | remote-endpoint = <&adv7180>; | |
374 | bus-width = <8>; | |
375 | }; | |
376 | }; | |
377 | }; | |
378 | ||
379 | &pci0 { | |
380 | pinctrl-0 = <&usb0_pins>; | |
381 | pinctrl-names = "default"; | |
382 | ||
383 | status = "okay"; | |
384 | }; | |
385 | ||
386 | &pci1 { | |
387 | pinctrl-0 = <&usb1_pins>; | |
388 | pinctrl-names = "default"; | |
389 | ||
390 | status = "okay"; | |
391 | }; | |
392 | ||
393 | &hsusb { | |
394 | pinctrl-0 = <&usb0_pins>; | |
395 | pinctrl-names = "default"; | |
396 | ||
397 | status = "okay"; | |
398 | }; | |
399 | ||
400 | &usbphy { | |
401 | status = "okay"; | |
402 | }; | |
403 | ||
404 | &pcie_bus_clk { | |
405 | clock-frequency = <100000000>; | |
406 | }; | |
407 | ||
408 | &pciec { | |
409 | status = "okay"; | |
410 | }; | |
411 | ||
412 | &can0 { | |
413 | pinctrl-0 = <&can0_pins>; | |
414 | pinctrl-names = "default"; | |
415 | ||
416 | status = "okay"; | |
417 | }; | |
418 | ||
419 | &du { | |
420 | pinctrl-0 = <&du_pins>; | |
421 | pinctrl-names = "default"; | |
422 | status = "okay"; | |
423 | ||
424 | clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, | |
425 | <&x3_clk>, <&x16_clk>; | |
426 | clock-names = "du.0", "du.1", "lvds.0", | |
427 | "dclkin.0", "dclkin.1"; | |
428 | ||
429 | ports { | |
430 | port@1 { | |
431 | endpoint { | |
432 | remote-endpoint = <&adv7511_in>; | |
433 | }; | |
434 | }; | |
435 | }; | |
436 | }; | |
437 | ||
438 | &rcar_sound { | |
439 | pinctrl-0 = <&ssi_pins &audio_clk_pins>; | |
440 | pinctrl-names = "default"; | |
441 | status = "okay"; | |
442 | ||
443 | /* Single DAI */ | |
444 | #sound-dai-cells = <0>; | |
445 | ||
446 | rcar_sound,dai { | |
447 | dai0 { | |
448 | playback = <&ssi0>; | |
449 | capture = <&ssi1>; | |
450 | }; | |
451 | }; | |
452 | }; | |
453 | ||
454 | &ssi1 { | |
455 | shared-pin; | |
456 | }; |