]>
Commit | Line | Data |
---|---|---|
a6c7b461 AM |
1 | /dts-v1/; |
2 | ||
3 | #include <dt-bindings/input/input.h> | |
4 | #include "tegra124.dtsi" | |
5 | ||
6 | / { | |
7 | model = "Acer Chromebook 13 CB5-311"; | |
8 | compatible = "google,nyan-big", "nvidia,tegra124"; | |
9 | ||
10 | aliases { | |
11 | console = &uarta; | |
12 | i2c0 = "/i2c@7000d000"; | |
13 | i2c1 = "/i2c@7000c000"; | |
14 | i2c2 = "/i2c@7000c400"; | |
15 | i2c3 = "/i2c@7000c500"; | |
16 | i2c4 = "/i2c@7000c700"; | |
17 | i2c5 = "/i2c@7000d100"; | |
18 | rtc0 = "/i2c@0,7000d000/pmic@40"; | |
19 | rtc1 = "/rtc@0,7000e000"; | |
20 | sdhci0 = "/sdhci@700b0600"; | |
21 | sdhci1 = "/sdhci@700b0400"; | |
22 | spi0 = "/spi@7000d400"; | |
23 | spi1 = "/spi@7000da00"; | |
24 | usb0 = "/usb@7d000000"; | |
25 | usb1 = "/usb@7d008000"; | |
26 | }; | |
27 | ||
28 | memory { | |
29 | reg = <0x80000000 0x80000000>; | |
30 | }; | |
31 | ||
ec44671b SG |
32 | host1x@50000000 { |
33 | dc@54200000 { | |
34 | display-timings { | |
35 | timing@0 { | |
36 | clock-frequency = <69500000>; | |
37 | hactive = <1366>; | |
38 | vactive = <768>; | |
39 | hsync-len = <32>; | |
40 | hfront-porch = <48>; | |
41 | hback-porch = <20>; | |
42 | vfront-porch = <3>; | |
43 | vback-porch = <13>; | |
44 | vsync-len = <6>; | |
45 | }; | |
46 | }; | |
47 | }; | |
48 | ||
49 | sor@54540000 { | |
50 | status = "okay"; | |
51 | ||
52 | nvidia,dpaux = <&dpaux>; | |
53 | nvidia,panel = <&panel>; | |
54 | }; | |
55 | ||
56 | dpaux@545c0000 { | |
57 | status = "okay"; | |
58 | }; | |
59 | }; | |
60 | ||
a6c7b461 AM |
61 | serial@70006000 { |
62 | /* Debug connector on the bottom of the board near SD card. */ | |
63 | status = "okay"; | |
64 | }; | |
65 | ||
66 | pwm@7000a000 { | |
67 | status = "okay"; | |
68 | }; | |
69 | ||
70 | i2c@7000c000 { | |
71 | status = "okay"; | |
72 | clock-frequency = <100000>; | |
73 | ||
74 | acodec: audio-codec@10 { | |
75 | compatible = "maxim,max98090"; | |
76 | reg = <0x10>; | |
77 | interrupt-parent = <&gpio>; | |
78 | interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; | |
79 | }; | |
80 | ||
81 | temperature-sensor@4c { | |
82 | compatible = "ti,tmp451"; | |
83 | reg = <0x4c>; | |
84 | interrupt-parent = <&gpio>; | |
85 | interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; | |
86 | ||
87 | #thermal-sensor-cells = <1>; | |
88 | }; | |
89 | }; | |
90 | ||
91 | i2c@7000c400 { | |
92 | status = "okay"; | |
93 | clock-frequency = <100000>; | |
94 | }; | |
95 | ||
96 | i2c@7000c500 { | |
97 | status = "okay"; | |
98 | clock-frequency = <400000>; | |
99 | ||
100 | tpm@20 { | |
101 | compatible = "infineon,slb9645tt"; | |
102 | reg = <0x20>; | |
103 | }; | |
104 | }; | |
105 | ||
106 | hdmi_ddc: i2c@7000c700 { | |
107 | status = "okay"; | |
108 | clock-frequency = <100000>; | |
109 | }; | |
110 | ||
111 | i2c@7000d000 { | |
112 | status = "okay"; | |
113 | clock-frequency = <400000>; | |
114 | ||
115 | pmic: pmic@40 { | |
116 | compatible = "ams,as3722"; | |
117 | reg = <0x40>; | |
118 | interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; | |
119 | ||
120 | ams,system-power-controller; | |
121 | ||
122 | #interrupt-cells = <2>; | |
123 | interrupt-controller; | |
124 | ||
125 | gpio-controller; | |
126 | #gpio-cells = <2>; | |
127 | ||
128 | pinctrl-names = "default"; | |
129 | pinctrl-0 = <&as3722_default>; | |
130 | ||
131 | as3722_default: pinmux { | |
132 | gpio0 { | |
133 | pins = "gpio0"; | |
134 | function = "gpio"; | |
135 | bias-pull-down; | |
136 | }; | |
137 | ||
138 | gpio1 { | |
139 | pins = "gpio1"; | |
140 | function = "gpio"; | |
141 | bias-pull-up; | |
142 | }; | |
143 | ||
144 | gpio2_4_7 { | |
145 | pins = "gpio2", "gpio4", "gpio7"; | |
146 | function = "gpio"; | |
147 | bias-pull-up; | |
148 | }; | |
149 | ||
150 | gpio3_6 { | |
151 | pins = "gpio3", "gpio6"; | |
152 | bias-high-impedance; | |
153 | }; | |
154 | ||
155 | gpio5 { | |
156 | pins = "gpio5"; | |
157 | function = "clk32k-out"; | |
158 | bias-pull-down; | |
159 | }; | |
160 | }; | |
161 | }; | |
162 | }; | |
163 | ||
164 | spi@7000d400 { | |
165 | status = "okay"; | |
166 | ||
167 | cros_ec: cros-ec@0 { | |
168 | compatible = "google,cros-ec-spi"; | |
169 | spi-max-frequency = <3000000>; | |
170 | interrupt-parent = <&gpio>; | |
171 | interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; | |
172 | reg = <0>; | |
173 | ||
174 | google,cros-ec-spi-msg-delay = <2000>; | |
175 | ||
176 | i2c-tunnel { | |
177 | compatible = "google,cros-ec-i2c-tunnel"; | |
178 | #address-cells = <1>; | |
179 | #size-cells = <0>; | |
180 | ||
181 | google,remote-bus = <0>; | |
182 | ||
183 | charger: bq24735@9 { | |
184 | compatible = "ti,bq24735"; | |
185 | reg = <0x9>; | |
186 | interrupt-parent = <&gpio>; | |
187 | interrupts = <TEGRA_GPIO(J, 0) | |
188 | GPIO_ACTIVE_HIGH>; | |
189 | ti,ac-detect-gpios = <&gpio | |
190 | TEGRA_GPIO(J, 0) | |
191 | GPIO_ACTIVE_HIGH>; | |
192 | }; | |
193 | ||
194 | battery: sbs-battery@b { | |
195 | compatible = "sbs,sbs-battery"; | |
196 | reg = <0xb>; | |
197 | sbs,i2c-retry-count = <2>; | |
198 | sbs,poll-retry-count = <10>; | |
199 | power-supplies = <&charger>; | |
200 | }; | |
201 | }; | |
202 | }; | |
203 | }; | |
204 | ||
205 | spi@7000da00 { | |
206 | status = "okay"; | |
207 | spi-max-frequency = <25000000>; | |
208 | ||
209 | flash@0 { | |
210 | compatible = "winbond,w25q32dw"; | |
211 | reg = <0>; | |
212 | }; | |
213 | }; | |
214 | ||
215 | pmc@7000e400 { | |
216 | nvidia,invert-interrupt; | |
217 | nvidia,suspend-mode = <0>; | |
218 | nvidia,cpu-pwr-good-time = <500>; | |
219 | nvidia,cpu-pwr-off-time = <300>; | |
220 | nvidia,core-pwr-good-time = <641 3845>; | |
221 | nvidia,core-pwr-off-time = <61036>; | |
222 | nvidia,core-power-req-active-high; | |
223 | nvidia,sys-clock-req-active-high; | |
224 | }; | |
225 | ||
226 | hda@70030000 { | |
227 | status = "okay"; | |
228 | }; | |
229 | ||
230 | sdhci@700b0000 { /* WiFi/BT on this bus */ | |
231 | status = "okay"; | |
232 | power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; | |
233 | bus-width = <4>; | |
234 | no-1-8-v; | |
235 | non-removable; | |
236 | }; | |
237 | ||
238 | sdhci@700b0400 { /* SD Card on this bus */ | |
239 | status = "okay"; | |
240 | cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; | |
241 | power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; | |
242 | wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; | |
243 | bus-width = <4>; | |
244 | no-1-8-v; | |
245 | }; | |
246 | ||
247 | sdhci@700b0600 { /* eMMC on this bus */ | |
248 | status = "okay"; | |
249 | bus-width = <8>; | |
250 | no-1-8-v; | |
251 | non-removable; | |
252 | }; | |
253 | ||
254 | ahub@70300000 { | |
255 | i2s@70301100 { | |
256 | status = "okay"; | |
257 | }; | |
258 | }; | |
259 | ||
260 | usb@7d000000 { /* Rear external USB port. */ | |
261 | status = "okay"; | |
84786a4c | 262 | nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; |
a6c7b461 AM |
263 | }; |
264 | ||
265 | usb-phy@7d000000 { | |
266 | status = "okay"; | |
267 | }; | |
268 | ||
269 | usb@7d004000 { /* Internal webcam. */ | |
270 | status = "okay"; | |
271 | }; | |
272 | ||
273 | usb-phy@7d004000 { | |
274 | status = "okay"; | |
275 | }; | |
276 | ||
277 | usb@7d008000 { /* Left external USB port. */ | |
278 | status = "okay"; | |
84786a4c | 279 | nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; |
a6c7b461 AM |
280 | }; |
281 | ||
282 | usb-phy@7d008000 { | |
283 | status = "okay"; | |
284 | }; | |
285 | ||
286 | backlight: backlight { | |
287 | compatible = "pwm-backlight"; | |
288 | ||
289 | enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; | |
ec44671b | 290 | power-supply = <&vdd_led>; |
a6c7b461 AM |
291 | pwms = <&pwm 1 1000000>; |
292 | ||
293 | default-brightness-level = <224>; | |
294 | brightness-levels = | |
295 | < 0 1 2 3 4 5 6 7 | |
296 | 8 9 10 11 12 13 14 15 | |
297 | 16 17 18 19 20 21 22 23 | |
298 | 24 25 26 27 28 29 30 31 | |
299 | 32 33 34 35 36 37 38 39 | |
300 | 40 41 42 43 44 45 46 47 | |
301 | 48 49 50 51 52 53 54 55 | |
302 | 56 57 58 59 60 61 62 63 | |
303 | 64 65 66 67 68 69 70 71 | |
304 | 72 73 74 75 76 77 78 79 | |
305 | 80 81 82 83 84 85 86 87 | |
306 | 88 89 90 91 92 93 94 95 | |
307 | 96 97 98 99 100 101 102 103 | |
308 | 104 105 106 107 108 109 110 111 | |
309 | 112 113 114 115 116 117 118 119 | |
310 | 120 121 122 123 124 125 126 127 | |
311 | 128 129 130 131 132 133 134 135 | |
312 | 136 137 138 139 140 141 142 143 | |
313 | 144 145 146 147 148 149 150 151 | |
314 | 152 153 154 155 156 157 158 159 | |
315 | 160 161 162 163 164 165 166 167 | |
316 | 168 169 170 171 172 173 174 175 | |
317 | 176 177 178 179 180 181 182 183 | |
318 | 184 185 186 187 188 189 190 191 | |
319 | 192 193 194 195 196 197 198 199 | |
320 | 200 201 202 203 204 205 206 207 | |
321 | 208 209 210 211 212 213 214 215 | |
322 | 216 217 218 219 220 221 222 223 | |
323 | 224 225 226 227 228 229 230 231 | |
324 | 232 233 234 235 236 237 238 239 | |
325 | 240 241 242 243 244 245 246 247 | |
326 | 248 249 250 251 252 253 254 255 | |
327 | 256>; | |
328 | }; | |
329 | ||
330 | clocks { | |
331 | compatible = "simple-bus"; | |
332 | #address-cells = <1>; | |
333 | #size-cells = <0>; | |
334 | ||
335 | clk32k_in: clock@0 { | |
336 | compatible = "fixed-clock"; | |
337 | reg = <0>; | |
338 | #clock-cells = <0>; | |
339 | clock-frequency = <32768>; | |
340 | }; | |
341 | }; | |
342 | ||
0deba29c SG |
343 | gpio@6000d000 { |
344 | u-boot,dm-pre-reloc; | |
345 | }; | |
346 | ||
a6c7b461 AM |
347 | gpio-keys { |
348 | compatible = "gpio-keys"; | |
349 | ||
350 | lid { | |
351 | label = "Lid"; | |
352 | gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; | |
353 | linux,input-type = <5>; | |
354 | linux,code = <KEY_RESERVED>; | |
355 | debounce-interval = <1>; | |
356 | gpio-key,wakeup; | |
357 | }; | |
358 | ||
359 | power { | |
360 | label = "Power"; | |
361 | gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; | |
362 | linux,code = <KEY_POWER>; | |
363 | debounce-interval = <30>; | |
364 | gpio-key,wakeup; | |
365 | }; | |
366 | }; | |
367 | ||
368 | panel: panel { | |
369 | compatible = "auo,b133xtn01"; | |
370 | ||
371 | backlight = <&backlight>; | |
372 | }; | |
373 | ||
ec44671b SG |
374 | regulators { |
375 | compatible = "simple-bus"; | |
376 | #address-cells = <1>; | |
377 | #size-cells = <0>; | |
378 | vdd_led: regulator@5 { | |
379 | compatible = "regulator-fixed"; | |
380 | reg = <5>; | |
381 | regulator-name = "+VDD_LED"; | |
382 | gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; | |
383 | enable-active-high; | |
384 | }; | |
385 | }; | |
386 | ||
a6c7b461 AM |
387 | sound { |
388 | compatible = "nvidia,tegra-audio-max98090-nyan-big", | |
389 | "nvidia,tegra-audio-max98090"; | |
390 | nvidia,model = "Acer Chromebook 13"; | |
391 | ||
392 | nvidia,audio-routing = | |
393 | "Headphones", "HPR", | |
394 | "Headphones", "HPL", | |
395 | "Speakers", "SPKR", | |
396 | "Speakers", "SPKL", | |
397 | "Mic Jack", "MICBIAS", | |
398 | "DMICL", "Int Mic", | |
399 | "DMICR", "Int Mic", | |
400 | "IN34", "Mic Jack"; | |
401 | ||
402 | nvidia,i2s-controller = <&tegra_i2s1>; | |
403 | nvidia,audio-codec = <&acodec>; | |
404 | ||
405 | clocks = <&tegra_car TEGRA124_CLK_PLL_A>, | |
406 | <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, | |
407 | <&tegra_car TEGRA124_CLK_EXTERN1>; | |
408 | clock-names = "pll_a", "pll_a_out0", "mclk"; | |
409 | ||
410 | nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; | |
411 | }; | |
412 | }; | |
413 | ||
414 | #include "cros-ec-keyboard.dtsi" |