[thirdparty/kernel/stable.git] / arch / arm / mach-mmp / pxa910.c

/*
 *  linux/arch/arm/mach-mmp/pxa910.c
 *
 *  Code specific to PXA910
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/platform_device.h>

#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/devices.h>

#include "common.h"

#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)

static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
{
	MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
	MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
	MFP_ADDR_X(GPIO100, GPIO109, 0x238),

	MFP_ADDR(GPIO123, 0xcc),
	MFP_ADDR(GPIO124, 0xd0),

	MFP_ADDR(DF_IO0, 0x40),
	MFP_ADDR(DF_IO1, 0x3c),
	MFP_ADDR(DF_IO2, 0x38),
	MFP_ADDR(DF_IO3, 0x34),
	MFP_ADDR(DF_IO4, 0x30),
	MFP_ADDR(DF_IO5, 0x2c),
	MFP_ADDR(DF_IO6, 0x28),
	MFP_ADDR(DF_IO7, 0x24),
	MFP_ADDR(DF_IO8, 0x20),
	MFP_ADDR(DF_IO9, 0x1c),
	MFP_ADDR(DF_IO10, 0x18),
	MFP_ADDR(DF_IO11, 0x14),
	MFP_ADDR(DF_IO12, 0x10),
	MFP_ADDR(DF_IO13, 0xc),
	MFP_ADDR(DF_IO14, 0x8),
	MFP_ADDR(DF_IO15, 0x4),

	MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
	MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
	MFP_ADDR(SM_nCS0, 0x4c),
	MFP_ADDR(SM_nCS1, 0x50),
	MFP_ADDR(DF_WEn, 0x54),
	MFP_ADDR(DF_REn, 0x58),
	MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
	MFP_ADDR(DF_ALE_SM_WEn, 0x60),
	MFP_ADDR(SM_SCLK, 0x64),
	MFP_ADDR(DF_RDY0, 0x68),
	MFP_ADDR(SM_BE0, 0x6c),
	MFP_ADDR(SM_BE1, 0x70),
	MFP_ADDR(SM_ADV, 0x74),
	MFP_ADDR(DF_RDY1, 0x78),
	MFP_ADDR(SM_ADVMUX, 0x7c),
	MFP_ADDR(SM_RDY, 0x80),

	MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),

	MFP_ADDR_END,
};

void __init pxa910_init_irq(void)
{
	icu_init_irq();
}

static int __init pxa910_init(void)
{
	if (cpu_is_pxa910()) {
#ifdef CONFIG_CACHE_TAUROS2
		tauros2_init(0);
#endif
		mfp_init_base(MFPR_VIRT_BASE);
		mfp_init_addr(pxa910_mfp_addr_map);
		pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
		pxa910_clk_init();
	}

	return 0;
}
postcore_initcall(pxa910_init);

/* system timer - clock enabled, 3.25MHz */
#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
#define APBC_TIMERS	APBC_REG(0x34)

void __init pxa910_timer_init(void)
{
	/* reset and configure */
	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);

	timer_init(IRQ_PXA910_AP1_TIMER1);
}

/* on-chip devices */

/* NOTE: there are totally 3 UARTs on PXA910:
 *
 *   UART1   - Slow UART (can be used both by AP and CP)
 *   UART2/3 - Fast UART
 *
 * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
 * they are re-ordered as:
 *
 *   pxa910_device_uart1 - UART2 as FFUART
 *   pxa910_device_uart2 - UART3 as BTUART
 *
 * UART1 is not used by AP for the moment.
 */
PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec);
PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0);
PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0);

struct resource pxa910_resource_gpio[] = {
	{
		.start	= 0xd4019000,
		.end	= 0xd4019fff,
		.flags	= IORESOURCE_MEM,
	}, {
		.start	= IRQ_PXA910_AP_GPIO,
		.end	= IRQ_PXA910_AP_GPIO,
		.name	= "gpio_mux",
		.flags	= IORESOURCE_IRQ,
	},
};

struct platform_device pxa910_device_gpio = {
	.name		= "pxa-gpio",
	.id		= -1,
	.num_resources	= ARRAY_SIZE(pxa910_resource_gpio),
	.resource	= pxa910_resource_gpio,
};

static struct resource pxa910_resource_rtc[] = {
	{
		.start	= 0xd4010000,
		.end	= 0xd401003f,
		.flags	= IORESOURCE_MEM,
	}, {
		.start	= IRQ_PXA910_RTC_INT,
		.end	= IRQ_PXA910_RTC_INT,
		.name	= "rtc 1Hz",
		.flags	= IORESOURCE_IRQ,
	}, {
		.start	= IRQ_PXA910_RTC_ALARM,
		.end	= IRQ_PXA910_RTC_ALARM,
		.name	= "rtc alarm",
		.flags	= IORESOURCE_IRQ,
	},
};

struct platform_device pxa910_device_rtc = {
	.name		= "sa1100-rtc",
	.id		= -1,
	.num_resources	= ARRAY_SIZE(pxa910_resource_rtc),
	.resource	= pxa910_resource_rtc,
};
Commit	Line	Data
14c6b5e7 EM	1	/*
	2	* linux/arch/arm/mach-mmp/pxa910.c
	3	*
	4	* Code specific to PXA910
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License version 2 as
	8	* published by the Free Software Foundation.
	9	*/
14c6b5e7 EM	10	#include <linux/module.h>
	11	#include <linux/kernel.h>
	12	#include <linux/init.h>
	13	#include <linux/list.h>
	14	#include <linux/io.h>
157d2644	15	#include <linux/platform_device.h>
14c6b5e7	16
a03d8b1e	17	#include <asm/hardware/cache-tauros2.h>
14c6b5e7 EM	18	#include <asm/mach/time.h>
	19	#include <mach/addr-map.h>
	20	#include <mach/regs-apbc.h>
14c6b5e7 EM	21	#include <mach/cputype.h>
14c6b5e7 EM	22	#include <mach/irqs.h>
14c6b5e7 EM	23	#include <mach/dma.h>
	24	#include <mach/mfp.h>
	25	#include <mach/devices.h>
	26
	27	#include "common.h"
14c6b5e7 EM	28
	29	#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
	30
	31	static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
	32	{
	33	MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
	34	MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
	35	MFP_ADDR_X(GPIO100, GPIO109, 0x238),
	36
	37	MFP_ADDR(GPIO123, 0xcc),
	38	MFP_ADDR(GPIO124, 0xd0),
	39
	40	MFP_ADDR(DF_IO0, 0x40),
	41	MFP_ADDR(DF_IO1, 0x3c),
	42	MFP_ADDR(DF_IO2, 0x38),
	43	MFP_ADDR(DF_IO3, 0x34),
	44	MFP_ADDR(DF_IO4, 0x30),
	45	MFP_ADDR(DF_IO5, 0x2c),
	46	MFP_ADDR(DF_IO6, 0x28),
	47	MFP_ADDR(DF_IO7, 0x24),
	48	MFP_ADDR(DF_IO8, 0x20),
	49	MFP_ADDR(DF_IO9, 0x1c),
	50	MFP_ADDR(DF_IO10, 0x18),
	51	MFP_ADDR(DF_IO11, 0x14),
	52	MFP_ADDR(DF_IO12, 0x10),
	53	MFP_ADDR(DF_IO13, 0xc),
	54	MFP_ADDR(DF_IO14, 0x8),
	55	MFP_ADDR(DF_IO15, 0x4),
	56
	57	MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
	58	MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
	59	MFP_ADDR(SM_nCS0, 0x4c),
	60	MFP_ADDR(SM_nCS1, 0x50),
	61	MFP_ADDR(DF_WEn, 0x54),
	62	MFP_ADDR(DF_REn, 0x58),
	63	MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
	64	MFP_ADDR(DF_ALE_SM_WEn, 0x60),
	65	MFP_ADDR(SM_SCLK, 0x64),
	66	MFP_ADDR(DF_RDY0, 0x68),
	67	MFP_ADDR(SM_BE0, 0x6c),
	68	MFP_ADDR(SM_BE1, 0x70),
	69	MFP_ADDR(SM_ADV, 0x74),
	70	MFP_ADDR(DF_RDY1, 0x78),
	71	MFP_ADDR(SM_ADVMUX, 0x7c),
	72	MFP_ADDR(SM_RDY, 0x80),
	73
	74	MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
	75
	76	MFP_ADDR_END,
	77	};
	78
14c6b5e7 EM	79	void __init pxa910_init_irq(void)
	80	{
	81	icu_init_irq();
14c6b5e7 EM	82	}
14c6b5e7 EM	83
14c6b5e7 EM	84	static int __init pxa910_init(void)
	85	{
	86	if (cpu_is_pxa910()) {
a03d8b1e HZ	87	#ifdef CONFIG_CACHE_TAUROS2
	88	tauros2_init(0);
	89	#endif
14c6b5e7 EM	90	mfp_init_base(MFPR_VIRT_BASE);
	91	mfp_init_addr(pxa910_mfp_addr_map);
	92	pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
9e73d698	93	pxa910_clk_init();
14c6b5e7 EM	94	}
	95
	96	return 0;
	97	}
	98	postcore_initcall(pxa910_init);
	99
	100	/* system timer - clock enabled, 3.25MHz */
	101	#define TIMER_CLK_RST (APBC_APBCLK \| APBC_FNCLK \| APBC_FNCLKSEL(3))
9e73d698	102	#define APBC_TIMERS APBC_REG(0x34)
14c6b5e7	103
6bb27d73	104	void __init pxa910_timer_init(void)
14c6b5e7 EM	105	{
14c6b5e7 EM	106	/* reset and configure */
9e73d698 CX	107	__raw_writel(APBC_APBCLK \| APBC_RST, APBC_TIMERS);
9e73d698 CX	108	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
14c6b5e7 EM	109
	110	timer_init(IRQ_PXA910_AP1_TIMER1);
	111	}
	112
14c6b5e7 EM	113	/* on-chip devices */
	114
	115	/* NOTE: there are totally 3 UARTs on PXA910:
	116	*
	117	* UART1 - Slow UART (can be used both by AP and CP)
	118	* UART2/3 - Fast UART
	119	*
	120	* To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
	121	* they are re-ordered as:
	122	*
	123	* pxa910_device_uart1 - UART2 as FFUART
	124	* pxa910_device_uart2 - UART3 as BTUART
	125	*
	126	* UART1 is not used by AP for the moment.
	127	*/
	128	PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
	129	PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
1a77920e EM	130	PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
1a77920e EM	131	PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
a27ba768 EM	132	PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
	133	PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
	134	PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
	135	PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
a0f266c1	136	PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
333893cd ZZ	137	PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec);
	138	PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0);
	139	PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0);
157d2644 HZ	140
	141	struct resource pxa910_resource_gpio[] = {
	142	{
	143	.start = 0xd4019000,
	144	.end = 0xd4019fff,
	145	.flags = IORESOURCE_MEM,
	146	}, {
	147	.start = IRQ_PXA910_AP_GPIO,
	148	.end = IRQ_PXA910_AP_GPIO,
93413c36	149	.name = "gpio_mux",
157d2644 HZ	150	.flags = IORESOURCE_IRQ,
	151	},
	152	};
	153
	154	struct platform_device pxa910_device_gpio = {
	155	.name = "pxa-gpio",
	156	.id = -1,
	157	.num_resources = ARRAY_SIZE(pxa910_resource_gpio),
	158	.resource = pxa910_resource_gpio,
	159	};
4128e275 HZ	160
	161	static struct resource pxa910_resource_rtc[] = {
	162	{
	163	.start = 0xd4010000,
	164	.end = 0xd401003f,
	165	.flags = IORESOURCE_MEM,
	166	}, {
	167	.start = IRQ_PXA910_RTC_INT,
	168	.end = IRQ_PXA910_RTC_INT,
	169	.name = "rtc 1Hz",
	170	.flags = IORESOURCE_IRQ,
	171	}, {
	172	.start = IRQ_PXA910_RTC_ALARM,
	173	.end = IRQ_PXA910_RTC_ALARM,
	174	.name = "rtc alarm",
	175	.flags = IORESOURCE_IRQ,
	176	},
	177	};
	178
	179	struct platform_device pxa910_device_rtc = {
	180	.name = "sa1100-rtc",
	181	.id = -1,
	182	.num_resources = ARRAY_SIZE(pxa910_resource_rtc),
	183	.resource = pxa910_resource_rtc,
	184	};