[thirdparty/kernel/stable.git] / arch / arm / mach-pxa / corgi.c

/*
 * Support for Sharp SL-C7xx PDAs
 * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
 *
 * Copyright (c) 2004-2005 Richard Purdie
 *
 * Based on Sharp's 2.4 kernel patches/lubbock.c
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
#include <linux/pm.h>

#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/system.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <asm/arch/pxa-regs.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/arch/corgi.h>
#include <asm/arch/sharpsl.h>

#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/scoop.h>

#include "generic.h"
#include "devices.h"
#include "sharpsl.h"


/*
 * Corgi SCOOP Device
 */
static struct resource corgi_scoop_resources[] = {
	[0] = {
		.start		= 0x10800000,
		.end		= 0x10800fff,
		.flags		= IORESOURCE_MEM,
	},
};

static struct scoop_config corgi_scoop_setup = {
	.io_dir 	= CORGI_SCOOP_IO_DIR,
	.io_out		= CORGI_SCOOP_IO_OUT,
};

struct platform_device corgiscoop_device = {
	.name		= "sharp-scoop",
	.id		= -1,
	.dev		= {
 		.platform_data	= &corgi_scoop_setup,
	},
	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
	.resource	= corgi_scoop_resources,
};

static void corgi_pcmcia_init(void)
{
	/* Setup default state of GPIO outputs
	   before we enable them as outputs. */
	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
		GPIO_bit(GPIO53_nPCE_2);

	pxa_gpio_mode(GPIO48_nPOE_MD);
	pxa_gpio_mode(GPIO49_nPWE_MD);
	pxa_gpio_mode(GPIO50_nPIOR_MD);
	pxa_gpio_mode(GPIO51_nPIOW_MD);
	pxa_gpio_mode(GPIO55_nPREG_MD);
	pxa_gpio_mode(GPIO56_nPWAIT_MD);
	pxa_gpio_mode(GPIO57_nIOIS16_MD);
	pxa_gpio_mode(GPIO52_nPCE_1_MD);
	pxa_gpio_mode(GPIO53_nPCE_2_MD);
	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
}

static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
{
	.dev        = &corgiscoop_device.dev,
	.irq        = CORGI_IRQ_GPIO_CF_IRQ,
	.cd_irq     = CORGI_IRQ_GPIO_CF_CD,
	.cd_irq_str = "PCMCIA0 CD",
},
};

static struct scoop_pcmcia_config corgi_pcmcia_config = {
	.devs         = &corgi_pcmcia_scoop[0],
	.num_devs     = 1,
	.pcmcia_init  = corgi_pcmcia_init,
};

EXPORT_SYMBOL(corgiscoop_device);


/*
 * Corgi SSP Device
 *
 * Set the parent as the scoop device because a lot of SSP devices
 * also use scoop functions and this makes the power up/down order
 * work correctly.
 */
struct platform_device corgissp_device = {
	.name		= "corgi-ssp",
	.dev		= {
 		.parent = &corgiscoop_device.dev,
	},
	.id		= -1,
};

struct corgissp_machinfo corgi_ssp_machinfo = {
	.port		= 1,
	.cs_lcdcon	= CORGI_GPIO_LCDCON_CS,
	.cs_ads7846	= CORGI_GPIO_ADS7846_CS,
	.cs_max1111	= CORGI_GPIO_MAX1111_CS,
	.clk_lcdcon	= 76,
	.clk_ads7846	= 2,
	.clk_max1111	= 8,
};


/*
 * Corgi Backlight Device
 */
static struct corgibl_machinfo corgi_bl_machinfo = {
	.max_intensity = 0x2f,
	.default_intensity = 0x1f,
	.limit_mask = 0x0b,
	.set_bl_intensity = corgi_bl_set_intensity,
};

static struct platform_device corgibl_device = {
	.name		= "corgi-bl",
	.dev		= {
 		.parent = &corgifb_device.dev,
		.platform_data	= &corgi_bl_machinfo,
	},
	.id		= -1,
};


/*
 * Corgi Keyboard Device
 */
static struct platform_device corgikbd_device = {
	.name		= "corgi-keyboard",
	.id		= -1,
};


/*
 * Corgi LEDs
 */
static struct platform_device corgiled_device = {
	.name		= "corgi-led",
	.id		= -1,
};

/*
 * Corgi Touch Screen Device
 */
static struct resource corgits_resources[] = {
	[0] = {
		.start		= CORGI_IRQ_GPIO_TP_INT,
		.end		= CORGI_IRQ_GPIO_TP_INT,
		.flags		= IORESOURCE_IRQ,
	},
};

static struct corgits_machinfo  corgi_ts_machinfo = {
	.get_hsync_len   = corgi_get_hsync_len,
	.put_hsync       = corgi_put_hsync,
	.wait_hsync      = corgi_wait_hsync,
};

static struct platform_device corgits_device = {
	.name		= "corgi-ts",
	.dev		= {
 		.parent = &corgissp_device.dev,
		.platform_data	= &corgi_ts_machinfo,
	},
	.id		= -1,
	.num_resources	= ARRAY_SIZE(corgits_resources),
	.resource	= corgits_resources,
};


/*
 * MMC/SD Device
 *
 * The card detect interrupt isn't debounced so we delay it by 250ms
 * to give the card a chance to fully insert/eject.
 */
static struct pxamci_platform_data corgi_mci_platform_data;

static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
{
	int err;

	/* setup GPIO for PXA25x MMC controller	*/
	pxa_gpio_mode(GPIO6_MMCCLK_MD);
	pxa_gpio_mode(GPIO8_MMCCS0_MD);
	pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
	pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);

	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);

	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
			  "MMC card detect", data);
	if (err) {
		printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
		return -1;
	}

	return 0;
}

static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
{
	struct pxamci_platform_data* p_d = dev->platform_data;

	if (( 1 << vdd) & p_d->ocr_mask)
		GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
	else
		GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
}

static int corgi_mci_get_ro(struct device *dev)
{
	return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP);
}

static void corgi_mci_exit(struct device *dev, void *data)
{
	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
}

static struct pxamci_platform_data corgi_mci_platform_data = {
	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
	.init 		= corgi_mci_init,
	.get_ro		= corgi_mci_get_ro,
	.setpower 	= corgi_mci_setpower,
	.exit		= corgi_mci_exit,
};


/*
 * Irda
 */
static void corgi_irda_transceiver_mode(struct device *dev, int mode)
{
	if (mode & IR_OFF)
		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
	else
		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
}

static struct pxaficp_platform_data corgi_ficp_platform_data = {
	.transceiver_cap  = IR_SIRMODE | IR_OFF,
	.transceiver_mode = corgi_irda_transceiver_mode,
};


/*
 * USB Device Controller
 */
static struct pxa2xx_udc_mach_info udc_info __initdata = {
	/* no connect GPIO; corgi can't tell connection status */
	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
};


static struct platform_device *devices[] __initdata = {
	&corgiscoop_device,
	&corgissp_device,
	&corgifb_device,
	&corgikbd_device,
	&corgibl_device,
	&corgits_device,
	&corgiled_device,
};

static void corgi_poweroff(void)
{
	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;

	if (!machine_is_corgi())
		/* Green LED off tells the bootloader to halt */
		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
	arm_machine_restart('h');
}

static void corgi_restart(char mode)
{
	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;

	if (!machine_is_corgi())
		/* Green LED on tells the bootloader to reboot */
		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
	arm_machine_restart('h');
}

static void __init corgi_init(void)
{
	pm_power_off = corgi_poweroff;
	arm_pm_restart = corgi_restart;

	/* setup sleep mode values */
	PWER  = 0x00000002;
	PFER  = 0x00000000;
	PRER  = 0x00000002;
	PGSR0 = 0x0158C000;
	PGSR1 = 0x00FF0080;
	PGSR2 = 0x0001C004;
	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
	PCFR |= PCFR_OPDE;

	corgi_ssp_set_machinfo(&corgi_ssp_machinfo);

	pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
	pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);

 	pxa_set_udc_info(&udc_info);
	pxa_set_mci_info(&corgi_mci_platform_data);
	pxa_set_ficp_info(&corgi_ficp_platform_data);

	platform_scoop_config = &corgi_pcmcia_config;

	platform_add_devices(devices, ARRAY_SIZE(devices));
}

static void __init fixup_corgi(struct machine_desc *desc,
		struct tag *tags, char **cmdline, struct meminfo *mi)
{
	sharpsl_save_param();
	mi->nr_banks=1;
	mi->bank[0].start = 0xa0000000;
	mi->bank[0].node = 0;
	if (machine_is_corgi())
		mi->bank[0].size = (32*1024*1024);
	else
		mi->bank[0].size = (64*1024*1024);
}

#ifdef CONFIG_MACH_CORGI
MACHINE_START(CORGI, "SHARP Corgi")
	.phys_io	= 0x40000000,
	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
	.fixup		= fixup_corgi,
	.map_io		= pxa_map_io,
	.init_irq	= pxa25x_init_irq,
	.init_machine	= corgi_init,
	.timer		= &pxa_timer,
MACHINE_END
#endif

#ifdef CONFIG_MACH_SHEPHERD
MACHINE_START(SHEPHERD, "SHARP Shepherd")
	.phys_io	= 0x40000000,
	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
	.fixup		= fixup_corgi,
	.map_io		= pxa_map_io,
	.init_irq	= pxa25x_init_irq,
	.init_machine	= corgi_init,
	.timer		= &pxa_timer,
MACHINE_END
#endif

#ifdef CONFIG_MACH_HUSKY
MACHINE_START(HUSKY, "SHARP Husky")
	.phys_io	= 0x40000000,
	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
	.fixup		= fixup_corgi,
	.map_io		= pxa_map_io,
	.init_irq	= pxa25x_init_irq,
	.init_machine	= corgi_init,
	.timer		= &pxa_timer,
MACHINE_END
#endif
Commit	Line	Data
1da177e4 LT	1	/*
	2	* Support for Sharp SL-C7xx PDAs
	3	* Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
	4	*
	5	* Copyright (c) 2004-2005 Richard Purdie
	6	*
	7	* Based on Sharp's 2.4 kernel patches/lubbock.c
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License version 2 as
	11	* published by the Free Software Foundation.
	12	*
	13	*/
	14
	15	#include <linux/kernel.h>
	16	#include <linux/init.h>
d052d1be	17	#include <linux/platform_device.h>
1da177e4 LT	18	#include <linux/major.h>
	19	#include <linux/fs.h>
	20	#include <linux/interrupt.h>
	21	#include <linux/mmc/host.h>
74617fb6	22	#include <linux/pm.h>
1da177e4 LT	23
	24	#include <asm/setup.h>
	25	#include <asm/memory.h>
	26	#include <asm/mach-types.h>
	27	#include <asm/hardware.h>
	28	#include <asm/irq.h>
	29	#include <asm/io.h>
74617fb6	30	#include <asm/system.h>
1da177e4 LT	31
	32	#include <asm/mach/arch.h>
	33	#include <asm/mach/map.h>
	34	#include <asm/mach/irq.h>
	35
	36	#include <asm/arch/pxa-regs.h>
ca1140b5	37	#include <asm/arch/irda.h>
1da177e4 LT	38	#include <asm/arch/mmc.h>
	39	#include <asm/arch/udc.h>
	40	#include <asm/arch/corgi.h>
1036260e	41	#include <asm/arch/sharpsl.h>
1da177e4 LT	42
	43	#include <asm/mach/sharpsl_param.h>
	44	#include <asm/hardware/scoop.h>
1da177e4 LT	45
1da177e4 LT	46	#include "generic.h"
46c41e62	47	#include "devices.h"
50a5de44	48	#include "sharpsl.h"
1da177e4 LT	49
	50
	51	/*
	52	* Corgi SCOOP Device
	53	*/
	54	static struct resource corgi_scoop_resources[] = {
	55	[0] = {
	56	.start = 0x10800000,
	57	.end = 0x10800fff,
	58	.flags = IORESOURCE_MEM,
	59	},
	60	};
	61
	62	static struct scoop_config corgi_scoop_setup = {
	63	.io_dir = CORGI_SCOOP_IO_DIR,
	64	.io_out = CORGI_SCOOP_IO_OUT,
	65	};
	66
a63ae442 RP	67	struct platform_device corgiscoop_device = {
	68	.name = "sharp-scoop",
	69	.id = -1,
	70	.dev = {
	71	.platform_data = &corgi_scoop_setup,
	72	},
	73	.num_resources = ARRAY_SIZE(corgi_scoop_resources),
	74	.resource = corgi_scoop_resources,
	75	};
	76
	77	static void corgi_pcmcia_init(void)
	78	{
	79	/* Setup default state of GPIO outputs
	80	before we enable them as outputs. */
	81	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) \|
	82	GPIO_bit(GPIO49_nPWE) \| GPIO_bit(GPIO50_nPIOR) \|
	83	GPIO_bit(GPIO51_nPIOW) \| GPIO_bit(GPIO52_nPCE_1) \|
	84	GPIO_bit(GPIO53_nPCE_2);
	85
	86	pxa_gpio_mode(GPIO48_nPOE_MD);
	87	pxa_gpio_mode(GPIO49_nPWE_MD);
	88	pxa_gpio_mode(GPIO50_nPIOR_MD);
	89	pxa_gpio_mode(GPIO51_nPIOW_MD);
	90	pxa_gpio_mode(GPIO55_nPREG_MD);
	91	pxa_gpio_mode(GPIO56_nPWAIT_MD);
	92	pxa_gpio_mode(GPIO57_nIOIS16_MD);
	93	pxa_gpio_mode(GPIO52_nPCE_1_MD);
	94	pxa_gpio_mode(GPIO53_nPCE_2_MD);
	95	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
	96	}
	97
0ce7625f RP	98	static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
	99	{
	100	.dev = &corgiscoop_device.dev,
	101	.irq = CORGI_IRQ_GPIO_CF_IRQ,
	102	.cd_irq = CORGI_IRQ_GPIO_CF_CD,
	103	.cd_irq_str = "PCMCIA0 CD",
	104	},
	105	};
	106
a63ae442 RP	107	static struct scoop_pcmcia_config corgi_pcmcia_config = {
	108	.devs = &corgi_pcmcia_scoop[0],
	109	.num_devs = 1,
	110	.pcmcia_init = corgi_pcmcia_init,
1da177e4 LT	111	};
1da177e4 LT	112
a63ae442 RP	113	EXPORT_SYMBOL(corgiscoop_device);
a63ae442 RP	114
1da177e4 LT	115
	116	/*
	117	* Corgi SSP Device
	118	*
	119	* Set the parent as the scoop device because a lot of SSP devices
	120	* also use scoop functions and this makes the power up/down order
	121	* work correctly.
	122	*/
41b1bce8	123	struct platform_device corgissp_device = {
1da177e4 LT	124	.name = "corgi-ssp",
	125	.dev = {
	126	.parent = &corgiscoop_device.dev,
	127	},
	128	.id = -1,
	129	};
	130
50a5de44 RP	131	struct corgissp_machinfo corgi_ssp_machinfo = {
	132	.port = 1,
	133	.cs_lcdcon = CORGI_GPIO_LCDCON_CS,
	134	.cs_ads7846 = CORGI_GPIO_ADS7846_CS,
	135	.cs_max1111 = CORGI_GPIO_MAX1111_CS,
	136	.clk_lcdcon = 76,
	137	.clk_ads7846 = 2,
	138	.clk_max1111 = 8,
	139	};
	140
1da177e4	141
1da177e4 LT	142	/*
	143	* Corgi Backlight Device
	144	*/
1351e6e0 RP	145	static struct corgibl_machinfo corgi_bl_machinfo = {
1351e6e0 RP	146	.max_intensity = 0x2f,
2c0f5fb0 RP	147	.default_intensity = 0x1f,
2c0f5fb0 RP	148	.limit_mask = 0x0b,
1351e6e0 RP	149	.set_bl_intensity = corgi_bl_set_intensity,
	150	};
	151
1da177e4 LT	152	static struct platform_device corgibl_device = {
	153	.name = "corgi-bl",
	154	.dev = {
	155	.parent = &corgifb_device.dev,
1351e6e0	156	.platform_data = &corgi_bl_machinfo,
1da177e4 LT	157	},
	158	.id = -1,
	159	};
	160
	161
f7ceff34 RP	162	/*
	163	* Corgi Keyboard Device
	164	*/
	165	static struct platform_device corgikbd_device = {
	166	.name = "corgi-keyboard",
	167	.id = -1,
	168	};
	169
	170
3179108d RP	171	/*
	172	* Corgi LEDs
	173	*/
	174	static struct platform_device corgiled_device = {
	175	.name = "corgi-led",
	176	.id = -1,
	177	};
	178
f7ceff34 RP	179	/*
	180	* Corgi Touch Screen Device
	181	*/
513b6e1a RP	182	static struct resource corgits_resources[] = {
	183	[0] = {
	184	.start = CORGI_IRQ_GPIO_TP_INT,
	185	.end = CORGI_IRQ_GPIO_TP_INT,
	186	.flags = IORESOURCE_IRQ,
	187	},
	188	};
	189
	190	static struct corgits_machinfo corgi_ts_machinfo = {
	191	.get_hsync_len = corgi_get_hsync_len,
	192	.put_hsync = corgi_put_hsync,
	193	.wait_hsync = corgi_wait_hsync,
	194	};
	195
f7ceff34 RP	196	static struct platform_device corgits_device = {
	197	.name = "corgi-ts",
	198	.dev = {
	199	.parent = &corgissp_device.dev,
513b6e1a	200	.platform_data = &corgi_ts_machinfo,
f7ceff34 RP	201	},
f7ceff34 RP	202	.id = -1,
513b6e1a RP	203	.num_resources = ARRAY_SIZE(corgits_resources),
513b6e1a RP	204	.resource = corgits_resources,
f7ceff34 RP	205	};
	206
	207
1da177e4 LT	208	/*
	209	* MMC/SD Device
	210	*
aa6c2e79	211	* The card detect interrupt isn't debounced so we delay it by 250ms
1da177e4 LT	212	* to give the card a chance to fully insert/eject.
1da177e4 LT	213	*/
aa6c2e79	214	static struct pxamci_platform_data corgi_mci_platform_data;
1da177e4	215
40220c1a	216	static int corgi_mci_init(struct device dev, irq_handler_t corgi_detect_int, void data)
1da177e4 LT	217	{
	218	int err;
	219
	220	/* setup GPIO for PXA25x MMC controller */
	221	pxa_gpio_mode(GPIO6_MMCCLK_MD);
	222	pxa_gpio_mode(GPIO8_MMCCS0_MD);
	223	pxa_gpio_mode(CORGI_GPIO_nSD_DETECT \| GPIO_IN);
	224	pxa_gpio_mode(CORGI_GPIO_SD_PWR \| GPIO_OUT);
	225
aa6c2e79	226	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
1da177e4	227
9ded96f2	228	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
52e405ea	229	IRQF_DISABLED \| IRQF_TRIGGER_RISING \| IRQF_TRIGGER_FALLING,
9ded96f2	230	"MMC card detect", data);
1da177e4 LT	231	if (err) {
	232	printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
	233	return -1;
	234	}
	235
1da177e4 LT	236	return 0;
	237	}
	238
	239	static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
	240	{
	241	struct pxamci_platform_data* p_d = dev->platform_data;
	242
fdce05bb	243	if (( 1 << vdd) & p_d->ocr_mask)
1da177e4	244	GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
fdce05bb	245	else
1da177e4	246	GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
1da177e4 LT	247	}
1da177e4 LT	248
3870ee8c RP	249	static int corgi_mci_get_ro(struct device *dev)
	250	{
	251	return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP);
	252	}
	253
1da177e4 LT	254	static void corgi_mci_exit(struct device dev, void data)
	255	{
	256	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
1da177e4 LT	257	}
	258
	259	static struct pxamci_platform_data corgi_mci_platform_data = {
	260	.ocr_mask = MMC_VDD_32_33\|MMC_VDD_33_34,
	261	.init = corgi_mci_init,
3870ee8c	262	.get_ro = corgi_mci_get_ro,
1da177e4 LT	263	.setpower = corgi_mci_setpower,
	264	.exit = corgi_mci_exit,
	265	};
	266
	267
ca1140b5 RP	268	/*
	269	* Irda
	270	*/
	271	static void corgi_irda_transceiver_mode(struct device *dev, int mode)
	272	{
	273	if (mode & IR_OFF)
	274	GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
	275	else
	276	GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
	277	}
	278
	279	static struct pxaficp_platform_data corgi_ficp_platform_data = {
	280	.transceiver_cap = IR_SIRMODE \| IR_OFF,
	281	.transceiver_mode = corgi_irda_transceiver_mode,
	282	};
	283
f7ceff34	284
1da177e4 LT	285	/*
	286	* USB Device Controller
	287	*/
1da177e4 LT	288	static struct pxa2xx_udc_mach_info udc_info __initdata = {
1da177e4 LT	289	/* no connect GPIO; corgi can't tell connection status */
b2bbb20b	290	.gpio_pullup = CORGI_GPIO_USB_PULLUP,
1da177e4 LT	291	};
	292
	293
	294	static struct platform_device *devices[] __initdata = {
	295	&corgiscoop_device,
	296	&corgissp_device,
	297	&corgifb_device,
f7ceff34	298	&corgikbd_device,
1da177e4	299	&corgibl_device,
f7ceff34	300	&corgits_device,
3179108d	301	&corgiled_device,
1da177e4 LT	302	};
1da177e4 LT	303
74617fb6 RP	304	static void corgi_poweroff(void)
	305	{
	306	RCSR = RCSR_HWR \| RCSR_WDR \| RCSR_SMR \| RCSR_GPR;
	307
	308	if (!machine_is_corgi())
	309	/* Green LED off tells the bootloader to halt */
	310	reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
	311	arm_machine_restart('h');
	312	}
	313
	314	static void corgi_restart(char mode)
	315	{
	316	RCSR = RCSR_HWR \| RCSR_WDR \| RCSR_SMR \| RCSR_GPR;
	317
	318	if (!machine_is_corgi())
	319	/* Green LED on tells the bootloader to reboot */
	320	set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
	321	arm_machine_restart('h');
	322	}
	323
1da177e4 LT	324	static void __init corgi_init(void)
1da177e4 LT	325	{
74617fb6 RP	326	pm_power_off = corgi_poweroff;
	327	arm_pm_restart = corgi_restart;
	328
fdce05bb RP	329	/* setup sleep mode values */
	330	PWER = 0x00000002;
	331	PFER = 0x00000000;
	332	PRER = 0x00000002;
	333	PGSR0 = 0x0158C000;
	334	PGSR1 = 0x00FF0080;
	335	PGSR2 = 0x0001C004;
	336	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
	337	PCFR \|= PCFR_OPDE;
	338
50a5de44 RP	339	corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
50a5de44 RP	340
ca1140b5	341	pxa_gpio_mode(CORGI_GPIO_IR_ON \| GPIO_OUT);
513b6e1a	342	pxa_gpio_mode(CORGI_GPIO_HSYNC \| GPIO_IN);
ca1140b5	343
1da177e4 LT	344	pxa_set_udc_info(&udc_info);
1da177e4 LT	345	pxa_set_mci_info(&corgi_mci_platform_data);
ca1140b5	346	pxa_set_ficp_info(&corgi_ficp_platform_data);
1da177e4	347
a63ae442	348	platform_scoop_config = &corgi_pcmcia_config;
0ce7625f	349
1da177e4 LT	350	platform_add_devices(devices, ARRAY_SIZE(devices));
	351	}
	352
	353	static void __init fixup_corgi(struct machine_desc *desc,
	354	struct tag tags, char cmdline, struct meminfo mi)
	355	{
	356	sharpsl_save_param();
	357	mi->nr_banks=1;
	358	mi->bank[0].start = 0xa0000000;
	359	mi->bank[0].node = 0;
	360	if (machine_is_corgi())
	361	mi->bank[0].size = (3210241024);
	362	else
	363	mi->bank[0].size = (6410241024);
	364	}
	365
1da177e4 LT	366	#ifdef CONFIG_MACH_CORGI
1da177e4 LT	367	MACHINE_START(CORGI, "SHARP Corgi")
e9dea0c6	368	.phys_io = 0x40000000,
68070bde	369	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
e9dea0c6	370	.fixup = fixup_corgi,
fdce05bb	371	.map_io = pxa_map_io,
cd49104d	372	.init_irq = pxa25x_init_irq,
e9dea0c6 RK	373	.init_machine = corgi_init,
e9dea0c6 RK	374	.timer = &pxa_timer,
1da177e4 LT	375	MACHINE_END
	376	#endif
	377
	378	#ifdef CONFIG_MACH_SHEPHERD
	379	MACHINE_START(SHEPHERD, "SHARP Shepherd")
e9dea0c6	380	.phys_io = 0x40000000,
68070bde	381	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
e9dea0c6	382	.fixup = fixup_corgi,
fdce05bb	383	.map_io = pxa_map_io,
cd49104d	384	.init_irq = pxa25x_init_irq,
e9dea0c6 RK	385	.init_machine = corgi_init,
e9dea0c6 RK	386	.timer = &pxa_timer,
1da177e4 LT	387	MACHINE_END
	388	#endif
	389
	390	#ifdef CONFIG_MACH_HUSKY
	391	MACHINE_START(HUSKY, "SHARP Husky")
e9dea0c6	392	.phys_io = 0x40000000,
68070bde	393	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
e9dea0c6	394	.fixup = fixup_corgi,
fdce05bb	395	.map_io = pxa_map_io,
cd49104d	396	.init_irq = pxa25x_init_irq,
e9dea0c6 RK	397	.init_machine = corgi_init,
e9dea0c6 RK	398	.timer = &pxa_timer,
1da177e4 LT	399	MACHINE_END
	400	#endif
	401