]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Support for Sharp SL-C7xx PDAs | |
3 | * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky) | |
4 | * | |
5 | * Copyright (c) 2004-2005 Richard Purdie | |
6 | * | |
7 | * Based on Sharp's 2.4 kernel patches/lubbock.c | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License version 2 as | |
11 | * published by the Free Software Foundation. | |
12 | * | |
13 | */ | |
14 | ||
15 | #include <linux/kernel.h> | |
16 | #include <linux/init.h> | |
17 | #include <linux/device.h> | |
18 | #include <linux/major.h> | |
19 | #include <linux/fs.h> | |
20 | #include <linux/interrupt.h> | |
21 | #include <linux/mmc/host.h> | |
22 | ||
23 | #include <asm/setup.h> | |
24 | #include <asm/memory.h> | |
25 | #include <asm/mach-types.h> | |
26 | #include <asm/hardware.h> | |
27 | #include <asm/irq.h> | |
28 | #include <asm/io.h> | |
29 | ||
30 | #include <asm/mach/arch.h> | |
31 | #include <asm/mach/map.h> | |
32 | #include <asm/mach/irq.h> | |
33 | ||
34 | #include <asm/arch/pxa-regs.h> | |
35 | #include <asm/arch/irq.h> | |
36 | #include <asm/arch/mmc.h> | |
37 | #include <asm/arch/udc.h> | |
38 | #include <asm/arch/corgi.h> | |
39 | ||
40 | #include <asm/mach/sharpsl_param.h> | |
41 | #include <asm/hardware/scoop.h> | |
1da177e4 LT |
42 | |
43 | #include "generic.h" | |
44 | ||
45 | ||
46 | /* | |
47 | * Corgi SCOOP Device | |
48 | */ | |
49 | static struct resource corgi_scoop_resources[] = { | |
50 | [0] = { | |
51 | .start = 0x10800000, | |
52 | .end = 0x10800fff, | |
53 | .flags = IORESOURCE_MEM, | |
54 | }, | |
55 | }; | |
56 | ||
57 | static struct scoop_config corgi_scoop_setup = { | |
58 | .io_dir = CORGI_SCOOP_IO_DIR, | |
59 | .io_out = CORGI_SCOOP_IO_OUT, | |
60 | }; | |
61 | ||
0ce7625f RP |
62 | static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { |
63 | { | |
64 | .dev = &corgiscoop_device.dev, | |
65 | .irq = CORGI_IRQ_GPIO_CF_IRQ, | |
66 | .cd_irq = CORGI_IRQ_GPIO_CF_CD, | |
67 | .cd_irq_str = "PCMCIA0 CD", | |
68 | }, | |
69 | }; | |
70 | ||
1da177e4 LT |
71 | struct platform_device corgiscoop_device = { |
72 | .name = "sharp-scoop", | |
73 | .id = -1, | |
74 | .dev = { | |
75 | .platform_data = &corgi_scoop_setup, | |
76 | }, | |
77 | .num_resources = ARRAY_SIZE(corgi_scoop_resources), | |
78 | .resource = corgi_scoop_resources, | |
79 | }; | |
80 | ||
81 | ||
82 | /* | |
83 | * Corgi SSP Device | |
84 | * | |
85 | * Set the parent as the scoop device because a lot of SSP devices | |
86 | * also use scoop functions and this makes the power up/down order | |
87 | * work correctly. | |
88 | */ | |
41b1bce8 | 89 | struct platform_device corgissp_device = { |
1da177e4 LT |
90 | .name = "corgi-ssp", |
91 | .dev = { | |
92 | .parent = &corgiscoop_device.dev, | |
93 | }, | |
94 | .id = -1, | |
95 | }; | |
96 | ||
97 | ||
1da177e4 LT |
98 | /* |
99 | * Corgi Backlight Device | |
100 | */ | |
101 | static struct platform_device corgibl_device = { | |
102 | .name = "corgi-bl", | |
103 | .dev = { | |
104 | .parent = &corgifb_device.dev, | |
105 | }, | |
106 | .id = -1, | |
107 | }; | |
108 | ||
109 | ||
110 | /* | |
111 | * MMC/SD Device | |
112 | * | |
113 | * The card detect interrupt isn't debounced so we delay it by HZ/4 | |
114 | * to give the card a chance to fully insert/eject. | |
115 | */ | |
116 | static struct mmc_detect { | |
117 | struct timer_list detect_timer; | |
118 | void *devid; | |
119 | } mmc_detect; | |
120 | ||
121 | static void mmc_detect_callback(unsigned long data) | |
122 | { | |
123 | mmc_detect_change(mmc_detect.devid); | |
124 | } | |
125 | ||
126 | static irqreturn_t corgi_mmc_detect_int(int irq, void *devid, struct pt_regs *regs) | |
127 | { | |
128 | mmc_detect.devid=devid; | |
129 | mod_timer(&mmc_detect.detect_timer, jiffies + HZ/4); | |
130 | return IRQ_HANDLED; | |
131 | } | |
132 | ||
133 | static int corgi_mci_init(struct device *dev, irqreturn_t (*unused_detect_int)(int, void *, struct pt_regs *), void *data) | |
134 | { | |
135 | int err; | |
136 | ||
137 | /* setup GPIO for PXA25x MMC controller */ | |
138 | pxa_gpio_mode(GPIO6_MMCCLK_MD); | |
139 | pxa_gpio_mode(GPIO8_MMCCS0_MD); | |
140 | pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN); | |
141 | pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT); | |
142 | ||
143 | init_timer(&mmc_detect.detect_timer); | |
144 | mmc_detect.detect_timer.function = mmc_detect_callback; | |
145 | mmc_detect.detect_timer.data = (unsigned long) &mmc_detect; | |
146 | ||
147 | err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_mmc_detect_int, SA_INTERRUPT, | |
148 | "MMC card detect", data); | |
149 | if (err) { | |
150 | printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); | |
151 | return -1; | |
152 | } | |
153 | ||
154 | set_irq_type(CORGI_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); | |
155 | ||
156 | return 0; | |
157 | } | |
158 | ||
159 | static void corgi_mci_setpower(struct device *dev, unsigned int vdd) | |
160 | { | |
161 | struct pxamci_platform_data* p_d = dev->platform_data; | |
162 | ||
163 | if (( 1 << vdd) & p_d->ocr_mask) { | |
164 | printk(KERN_DEBUG "%s: on\n", __FUNCTION__); | |
165 | GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR); | |
166 | } else { | |
167 | printk(KERN_DEBUG "%s: off\n", __FUNCTION__); | |
168 | GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR); | |
169 | } | |
170 | } | |
171 | ||
172 | static void corgi_mci_exit(struct device *dev, void *data) | |
173 | { | |
174 | free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data); | |
175 | del_timer(&mmc_detect.detect_timer); | |
176 | } | |
177 | ||
178 | static struct pxamci_platform_data corgi_mci_platform_data = { | |
179 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | |
180 | .init = corgi_mci_init, | |
181 | .setpower = corgi_mci_setpower, | |
182 | .exit = corgi_mci_exit, | |
183 | }; | |
184 | ||
185 | ||
186 | /* | |
187 | * USB Device Controller | |
188 | */ | |
189 | static void corgi_udc_command(int cmd) | |
190 | { | |
191 | switch(cmd) { | |
192 | case PXA2XX_UDC_CMD_CONNECT: | |
193 | GPSR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP); | |
194 | break; | |
195 | case PXA2XX_UDC_CMD_DISCONNECT: | |
196 | GPCR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP); | |
197 | break; | |
198 | } | |
199 | } | |
200 | ||
201 | static struct pxa2xx_udc_mach_info udc_info __initdata = { | |
202 | /* no connect GPIO; corgi can't tell connection status */ | |
203 | .udc_command = corgi_udc_command, | |
204 | }; | |
205 | ||
206 | ||
207 | static struct platform_device *devices[] __initdata = { | |
208 | &corgiscoop_device, | |
209 | &corgissp_device, | |
210 | &corgifb_device, | |
211 | &corgibl_device, | |
212 | }; | |
213 | ||
214 | static void __init corgi_init(void) | |
215 | { | |
1da177e4 LT |
216 | pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); |
217 | pxa_set_udc_info(&udc_info); | |
218 | pxa_set_mci_info(&corgi_mci_platform_data); | |
219 | ||
0ce7625f RP |
220 | scoop_num = 1; |
221 | scoop_devs = &corgi_pcmcia_scoop[0]; | |
222 | ||
1da177e4 LT |
223 | platform_add_devices(devices, ARRAY_SIZE(devices)); |
224 | } | |
225 | ||
226 | static void __init fixup_corgi(struct machine_desc *desc, | |
227 | struct tag *tags, char **cmdline, struct meminfo *mi) | |
228 | { | |
229 | sharpsl_save_param(); | |
230 | mi->nr_banks=1; | |
231 | mi->bank[0].start = 0xa0000000; | |
232 | mi->bank[0].node = 0; | |
233 | if (machine_is_corgi()) | |
234 | mi->bank[0].size = (32*1024*1024); | |
235 | else | |
236 | mi->bank[0].size = (64*1024*1024); | |
237 | } | |
238 | ||
239 | static void __init corgi_init_irq(void) | |
240 | { | |
241 | pxa_init_irq(); | |
242 | } | |
243 | ||
244 | static struct map_desc corgi_io_desc[] __initdata = { | |
245 | /* virtual physical length */ | |
246 | /* { 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE },*/ /* LCDC (readable for Qt driver) */ | |
247 | /* { 0xef700000, 0x10800000, 0x00001000, MT_DEVICE },*/ /* SCOOP */ | |
248 | { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */ | |
249 | }; | |
250 | ||
251 | static void __init corgi_map_io(void) | |
252 | { | |
253 | pxa_map_io(); | |
254 | iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc)); | |
255 | ||
256 | /* setup sleep mode values */ | |
257 | PWER = 0x00000002; | |
258 | PFER = 0x00000000; | |
259 | PRER = 0x00000002; | |
260 | PGSR0 = 0x0158C000; | |
261 | PGSR1 = 0x00FF0080; | |
262 | PGSR2 = 0x0001C004; | |
263 | /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ | |
264 | PCFR |= PCFR_OPDE; | |
265 | } | |
266 | ||
267 | #ifdef CONFIG_MACH_CORGI | |
268 | MACHINE_START(CORGI, "SHARP Corgi") | |
e9dea0c6 RK |
269 | .phys_ram = 0xa0000000, |
270 | .phys_io = 0x40000000, | |
68070bde | 271 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
e9dea0c6 RK |
272 | .fixup = fixup_corgi, |
273 | .map_io = corgi_map_io, | |
274 | .init_irq = corgi_init_irq, | |
275 | .init_machine = corgi_init, | |
276 | .timer = &pxa_timer, | |
1da177e4 LT |
277 | MACHINE_END |
278 | #endif | |
279 | ||
280 | #ifdef CONFIG_MACH_SHEPHERD | |
281 | MACHINE_START(SHEPHERD, "SHARP Shepherd") | |
e9dea0c6 RK |
282 | .phys_ram = 0xa0000000, |
283 | .phys_io = 0x40000000, | |
68070bde | 284 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
e9dea0c6 RK |
285 | .fixup = fixup_corgi, |
286 | .map_io = corgi_map_io, | |
287 | .init_irq = corgi_init_irq, | |
288 | .init_machine = corgi_init, | |
289 | .timer = &pxa_timer, | |
1da177e4 LT |
290 | MACHINE_END |
291 | #endif | |
292 | ||
293 | #ifdef CONFIG_MACH_HUSKY | |
294 | MACHINE_START(HUSKY, "SHARP Husky") | |
e9dea0c6 RK |
295 | .phys_ram = 0xa0000000, |
296 | .phys_io = 0x40000000, | |
68070bde | 297 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
e9dea0c6 RK |
298 | .fixup = fixup_corgi, |
299 | .map_io = corgi_map_io, | |
300 | .init_irq = corgi_init_irq, | |
301 | .init_machine = corgi_init, | |
302 | .timer = &pxa_timer, | |
1da177e4 LT |
303 | MACHINE_END |
304 | #endif | |
305 |