]> git.ipfire.org Git - thirdparty/kernel/linux.git/blame - arch/sparc/include/asm/sunbpp.h
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
[thirdparty/kernel/linux.git] / arch / sparc / include / asm / sunbpp.h
CommitLineData
b2441318 1/* SPDX-License-Identifier: GPL-2.0 */
88278ca2 2/*
a439fe51 3 * include/asm/sunbpp.h
1da177e4
LT
4 */
5
6#ifndef _ASM_SPARC_SUNBPP_H
7#define _ASM_SPARC_SUNBPP_H
8
9struct bpp_regs {
10 /* DMA registers */
11 __volatile__ __u32 p_csr; /* DMA Control/Status Register */
12 __volatile__ __u32 p_addr; /* Address Register */
13 __volatile__ __u32 p_bcnt; /* Byte Count Register */
14 __volatile__ __u32 p_tst_csr; /* Test Control/Status (DMA2 only) */
15 /* Parallel Port registers */
16 __volatile__ __u16 p_hcr; /* Hardware Configuration Register */
17 __volatile__ __u16 p_ocr; /* Operation Configuration Register */
18 __volatile__ __u8 p_dr; /* Parallel Data Register */
19 __volatile__ __u8 p_tcr; /* Transfer Control Register */
20 __volatile__ __u8 p_or; /* Output Register */
21 __volatile__ __u8 p_ir; /* Input Register */
22 __volatile__ __u16 p_icr; /* Interrupt Control Register */
23};
24
25/* P_HCR. Time is in increments of SBus clock. */
26#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */
27#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */
28#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */
29
30/* P_OCR. */
31#define P_OCR_MEM_CLR 0x8000
32#define P_OCR_DATA_SRC 0x4000 /* ) */
33#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */
34#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */
35#define P_OCR_ACK_DSEL 0x0800 /* ) */
36#define P_OCR_EN_DIAG 0x0400
37#define P_OCR_BUSY_OP 0x0200 /* Busy operation */
38#define P_OCR_ACK_OP 0x0100 /* Ack operation */
39#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */
40#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */
41#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */
42#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */
43
44/* P_TCR */
45#define P_TCR_DIR 0x08
46#define P_TCR_BUSY 0x04
47#define P_TCR_ACK 0x02
48#define P_TCR_DS 0x01 /* Strobe */
49
50/* P_OR */
51#define P_OR_V3 0x20 /* ) */
52#define P_OR_V2 0x10 /* ) on Zebra only */
53#define P_OR_V1 0x08 /* ) */
54#define P_OR_INIT 0x04
55#define P_OR_AFXN 0x02 /* Auto Feed */
56#define P_OR_SLCT_IN 0x01
57
58/* P_IR */
59#define P_IR_PE 0x04
60#define P_IR_SLCT 0x02
61#define P_IR_ERR 0x01
62
63/* P_ICR */
64#define P_DS_IRQ 0x8000 /* RW1 */
65#define P_ACK_IRQ 0x4000 /* RW1 */
66#define P_BUSY_IRQ 0x2000 /* RW1 */
67#define P_PE_IRQ 0x1000 /* RW1 */
68#define P_SLCT_IRQ 0x0800 /* RW1 */
69#define P_ERR_IRQ 0x0400 /* RW1 */
70#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */
71#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */
72#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */
73#define P_BUSY_IRQ_EN 0x0040 /* RW */
74#define P_PE_IRP 0x0020 /* RW 1= rising edge */
75#define P_PE_IRQ_EN 0x0010 /* RW */
76#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */
77#define P_SLCT_IRQ_EN 0x0004 /* RW */
78#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */
79#define P_ERR_IRQ_EN 0x0001 /* RW */
80
81#endif /* !(_ASM_SPARC_SUNBPP_H) */