]>
Commit | Line | Data |
---|---|---|
4745acaa SR |
1 | /* |
2 | * (C) Copyright 2007 | |
3 | * Stefan Roese, DENX Software Engineering, sr@denx.de. | |
4 | * | |
5 | * See file CREDITS for list of people who contributed to this | |
6 | * project. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License as | |
10 | * published by the Free Software Foundation; either version 2 of | |
11 | * the License, or (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
21 | * MA 02111-1307 USA | |
22 | * | |
23 | */ | |
24 | ||
25 | #include <common.h> | |
26 | #include <ppc4xx.h> | |
4745acaa | 27 | #include <i2c.h> |
bf8324e4 SR |
28 | #include <libfdt.h> |
29 | #include <fdt_support.h> | |
c7c6da23 SR |
30 | #include <asm/processor.h> |
31 | #include <asm/io.h> | |
32 | #include <asm/gpio.h> | |
33 | #include <asm/4xx_pcie.h> | |
4745acaa | 34 | |
1218abf1 WD |
35 | DECLARE_GLOBAL_DATA_PTR; |
36 | ||
4745acaa SR |
37 | int board_early_init_f (void) |
38 | { | |
39 | unsigned long mfr; | |
4745acaa SR |
40 | |
41 | /*----------------------------------------------------------------------+ | |
42 | * Interrupt controller setup for the Katmai 440SPe Evaluation board. | |
43 | *-----------------------------------------------------------------------+ | |
44 | *-----------------------------------------------------------------------+ | |
45 | * Interrupt | Source | Pol. | Sensi.| Crit. | | |
46 | *-----------+-----------------------------------+-------+-------+-------+ | |
47 | * IRQ 00 | UART0 | High | Level | Non | | |
48 | * IRQ 01 | UART1 | High | Level | Non | | |
49 | * IRQ 02 | IIC0 | High | Level | Non | | |
50 | * IRQ 03 | IIC1 | High | Level | Non | | |
51 | * IRQ 04 | PCI0X0 MSG IN | High | Level | Non | | |
52 | * IRQ 05 | PCI0X0 CMD Write | High | Level | Non | | |
53 | * IRQ 06 | PCI0X0 Power Mgt | High | Level | Non | | |
54 | * IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non | | |
55 | * IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non | | |
56 | * IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non | | |
57 | * IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non | | |
58 | * IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit | | |
59 | * IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non | | |
60 | * IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non | | |
61 | * IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non | | |
62 | * IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non | | |
63 | * IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non | | |
64 | * IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit | | |
65 | * IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non | | |
66 | * IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non | | |
67 | * IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non | | |
68 | * IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non | | |
69 | * IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non | | |
70 | * IRQ 23 | I2O Inbound Doorbell | High | Level | Non | | |
71 | * IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non | | |
72 | * IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non | | |
73 | * IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non | | |
74 | * IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non | | |
75 | * IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non | | |
76 | * IRQ 29 | GPT Down Count Timer | Rising| Edge | Non | | |
77 | * IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non | | |
78 | * IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. | | |
79 | *------------------------------------------------------------------------ | |
80 | * IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non | | |
81 | * IRQ 33 | MAL Serr | High | Level | Non | | |
82 | * IRQ 34 | MAL Txde | High | Level | Non | | |
83 | * IRQ 35 | MAL Rxde | High | Level | Non | | |
84 | * IRQ 36 | DMC CE or DMC UE | High | Level | Non | | |
85 | * IRQ 37 | EBC or UART2 | High |Lvl Edg| Non | | |
86 | * IRQ 38 | MAL TX EOB | High | Level | Non | | |
87 | * IRQ 39 | MAL RX EOB | High | Level | Non | | |
88 | * IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non | | |
89 | * IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non | | |
90 | * IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non | | |
91 | * IRQ 43 | L2 Cache | Risin | Edge | Non | | |
92 | * IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non | | |
93 | * IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non | | |
94 | * IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non | | |
95 | * IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | | |
96 | * IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | | |
97 | * IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non | | |
98 | * IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non | | |
99 | * IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non | | |
100 | * IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | | |
101 | * IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non | | |
102 | * IRQ 54 | DMA Error | High | Level | Non | | |
103 | * IRQ 55 | DMA I2O Error | High | Level | Non | | |
104 | * IRQ 56 | Serial ROM | High | Level | Non | | |
105 | * IRQ 57 | PCIX0 Error | High | Edge | Non | | |
106 | * IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non | | |
107 | * IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non | | |
108 | * IRQ 60 | EMAC0 Interrupt | High | Level | Non | | |
109 | * IRQ 61 | EMAC0 Wake-up | High | Level | Non | | |
110 | * IRQ 62 | Reserved | High | Level | Non | | |
111 | * IRQ 63 | XOR | High | Level | Non | | |
112 | *----------------------------------------------------------------------- | |
113 | * IRQ 64 | PE0 AL | High | Level | Non | | |
114 | * IRQ 65 | PE0 VPD Access | Risin | Edge | Non | | |
115 | * IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | | |
116 | * IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | | |
117 | * IRQ 68 | PE0 TCR | High | Level | Non | | |
118 | * IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | | |
119 | * IRQ 70 | PE0 DCR Error | High | Level | Non | | |
120 | * IRQ 71 | Reserved | N/A | N/A | Non | | |
121 | * IRQ 72 | PE1 AL | High | Level | Non | | |
122 | * IRQ 73 | PE1 VPD Access | Risin | Edge | Non | | |
123 | * IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | | |
124 | * IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | | |
125 | * IRQ 76 | PE1 TCR | High | Level | Non | | |
126 | * IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | | |
127 | * IRQ 78 | PE1 DCR Error | High | Level | Non | | |
128 | * IRQ 79 | Reserved | N/A | N/A | Non | | |
129 | * IRQ 80 | PE2 AL | High | Level | Non | | |
130 | * IRQ 81 | PE2 VPD Access | Risin | Edge | Non | | |
131 | * IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | | |
132 | * IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | | |
133 | * IRQ 84 | PE2 TCR | High | Level | Non | | |
134 | * IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | | |
135 | * IRQ 86 | PE2 DCR Error | High | Level | Non | | |
136 | * IRQ 87 | Reserved | N/A | N/A | Non | | |
137 | * IRQ 88 | External IRQ(5) | Progr | Progr | Non | | |
138 | * IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | | |
139 | * IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | | |
140 | * IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | | |
141 | * IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | | |
142 | * IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | | |
143 | * IRQ 94 | Reserved | N/A | N/A | Non | | |
144 | * IRQ 95 | Reserved | N/A | N/A | Non | | |
145 | *----------------------------------------------------------------------- | |
146 | * IRQ 96 | PE0 INTA | High | Level | Non | | |
147 | * IRQ 97 | PE0 INTB | High | Level | Non | | |
148 | * IRQ 98 | PE0 INTC | High | Level | Non | | |
149 | * IRQ 99 | PE0 INTD | High | Level | Non | | |
150 | * IRQ 100 | PE1 INTA | High | Level | Non | | |
151 | * IRQ 101 | PE1 INTB | High | Level | Non | | |
152 | * IRQ 102 | PE1 INTC | High | Level | Non | | |
153 | * IRQ 103 | PE1 INTD | High | Level | Non | | |
154 | * IRQ 104 | PE2 INTA | High | Level | Non | | |
155 | * IRQ 105 | PE2 INTB | High | Level | Non | | |
156 | * IRQ 106 | PE2 INTC | High | Level | Non | | |
157 | * IRQ 107 | PE2 INTD | Risin | Edge | Non | | |
158 | * IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non | | |
159 | * IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non | | |
160 | * IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non | | |
161 | * IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non | | |
162 | * IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non | | |
163 | * IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non | | |
164 | * IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non | | |
165 | * IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non | | |
166 | * IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non | | |
167 | * IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non | | |
168 | * IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non | | |
169 | * IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non | | |
170 | * IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non | | |
171 | * IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non | | |
172 | * IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non | | |
173 | * IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non | | |
174 | * IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non | | |
175 | * IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non | | |
176 | * IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non | | |
177 | * IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non | | |
178 | *-----------+-----------------------------------+-------+-------+-------+ */ | |
179 | /*-------------------------------------------------------------------------+ | |
180 | * Put UICs in PowerPC440SPemode. | |
181 | * Initialise UIC registers. Clear all interrupts. Disable all interrupts. | |
182 | * Set critical interrupt values. Set interrupt polarities. Set interrupt | |
183 | * trigger levels. Make bit 0 High priority. Clear all interrupts again. | |
184 | *------------------------------------------------------------------------*/ | |
185 | mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */ | |
186 | mtdcr (uic3er, 0x00000000); /* disable all interrupts */ | |
187 | mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical interrupts: */ | |
188 | mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities*/ | |
189 | mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */ | |
190 | mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ | |
191 | mtdcr (uic3sr, 0x00000000); /* clear all interrupts*/ | |
192 | mtdcr (uic3sr, 0xffffffff); /* clear all interrupts*/ | |
193 | ||
194 | ||
195 | mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */ | |
196 | mtdcr (uic2er, 0x00000000); /* disable all interrupts*/ | |
197 | mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts*/ | |
198 | mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities*/ | |
199 | mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */ | |
200 | mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ | |
201 | mtdcr (uic2sr, 0x00000000); /* clear all interrupts */ | |
202 | mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */ | |
203 | ||
204 | mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts*/ | |
205 | mtdcr (uic1er, 0x00000000); /* disable all interrupts*/ | |
206 | mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts*/ | |
207 | mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */ | |
208 | mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels*/ | |
209 | mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ | |
210 | mtdcr (uic1sr, 0x00000000); /* clear all interrupts*/ | |
211 | mtdcr (uic1sr, 0xffffffff); /* clear all interrupts*/ | |
212 | ||
213 | mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */ | |
214 | mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted cascade to be checked */ | |
215 | mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical interrupts*/ | |
216 | mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities*/ | |
217 | mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */ | |
218 | mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ | |
219 | mtdcr (uic0sr, 0x00000000); /* clear all interrupts*/ | |
220 | mtdcr (uic0sr, 0xffffffff); /* clear all interrupts*/ | |
221 | ||
a27044b1 SR |
222 | mfsdr(sdr_mfr, mfr); |
223 | mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ | |
224 | mtsdr(sdr_mfr, mfr); | |
4745acaa | 225 | |
ba58e4c9 | 226 | mtsdr(SDR0_PFC0, CFG_PFC0); |
4745acaa | 227 | |
ba58e4c9 SR |
228 | out32(GPIO0_OR, CFG_GPIO_OR); |
229 | out32(GPIO0_ODR, CFG_GPIO_ODR); | |
230 | out32(GPIO0_TCR, CFG_GPIO_TCR); | |
4745acaa SR |
231 | |
232 | return 0; | |
233 | } | |
234 | ||
235 | int checkboard (void) | |
236 | { | |
237 | char *s = getenv("serial#"); | |
238 | ||
239 | printf("Board: Katmai - AMCC 440SPe Evaluation Board"); | |
240 | if (s != NULL) { | |
241 | puts(", serial# "); | |
242 | puts(s); | |
243 | } | |
244 | putc('\n'); | |
245 | ||
246 | return 0; | |
247 | } | |
248 | ||
249 | #if defined(CFG_DRAM_TEST) | |
250 | int testdram (void) | |
251 | { | |
252 | uint *pstart = (uint *) 0x00000000; | |
253 | uint *pend = (uint *) 0x08000000; | |
254 | uint *p; | |
255 | ||
256 | for (p = pstart; p < pend; p++) | |
257 | *p = 0xaaaaaaaa; | |
258 | ||
259 | for (p = pstart; p < pend; p++) { | |
260 | if (*p != 0xaaaaaaaa) { | |
261 | printf ("SDRAM test fails at: %08x\n", (uint) p); | |
262 | return 1; | |
263 | } | |
264 | } | |
265 | ||
266 | for (p = pstart; p < pend; p++) | |
267 | *p = 0x55555555; | |
268 | ||
269 | for (p = pstart; p < pend; p++) { | |
270 | if (*p != 0x55555555) { | |
271 | printf ("SDRAM test fails at: %08x\n", (uint) p); | |
272 | return 1; | |
273 | } | |
274 | } | |
275 | return 0; | |
276 | } | |
277 | #endif | |
278 | ||
279 | /************************************************************************* | |
280 | * pci_pre_init | |
281 | * | |
282 | * This routine is called just prior to registering the hose and gives | |
283 | * the board the opportunity to check things. Returning a value of zero | |
284 | * indicates that things are bad & PCI initialization should be aborted. | |
285 | * | |
286 | * Different boards may wish to customize the pci controller structure | |
287 | * (add regions, override default access routines, etc) or perform | |
288 | * certain pre-initialization actions. | |
289 | * | |
290 | ************************************************************************/ | |
466fff1a | 291 | #if defined(CONFIG_PCI) |
4745acaa SR |
292 | int pci_pre_init(struct pci_controller * hose ) |
293 | { | |
294 | unsigned long strap; | |
295 | ||
296 | /*-------------------------------------------------------------------+ | |
297 | * The katmai board is always configured as the host & requires the | |
298 | * PCI arbiter to be enabled. | |
299 | *-------------------------------------------------------------------*/ | |
300 | mfsdr(sdr_sdstp1, strap); | |
301 | if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { | |
302 | printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); | |
303 | return 0; | |
304 | } | |
305 | ||
306 | return 1; | |
307 | } | |
466fff1a | 308 | #endif /* defined(CONFIG_PCI) */ |
4745acaa SR |
309 | |
310 | /************************************************************************* | |
311 | * pci_target_init | |
312 | * | |
313 | * The bootstrap configuration provides default settings for the pci | |
314 | * inbound map (PIM). But the bootstrap config choices are limited and | |
315 | * may not be sufficient for a given board. | |
316 | * | |
317 | ************************************************************************/ | |
318 | #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) | |
319 | void pci_target_init(struct pci_controller * hose ) | |
320 | { | |
4745acaa SR |
321 | /*-------------------------------------------------------------------+ |
322 | * Disable everything | |
323 | *-------------------------------------------------------------------*/ | |
324 | out32r( PCIX0_PIM0SA, 0 ); /* disable */ | |
325 | out32r( PCIX0_PIM1SA, 0 ); /* disable */ | |
326 | out32r( PCIX0_PIM2SA, 0 ); /* disable */ | |
327 | out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ | |
328 | ||
329 | /*-------------------------------------------------------------------+ | |
330 | * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 | |
331 | * strapping options to not support sizes such as 128/256 MB. | |
332 | *-------------------------------------------------------------------*/ | |
333 | out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); | |
334 | out32r( PCIX0_PIM0LAH, 0 ); | |
335 | out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); | |
336 | out32r( PCIX0_BAR0, 0 ); | |
337 | ||
338 | /*-------------------------------------------------------------------+ | |
339 | * Program the board's subsystem id/vendor id | |
340 | *-------------------------------------------------------------------*/ | |
341 | out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); | |
342 | out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); | |
343 | ||
344 | out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); | |
345 | } | |
346 | #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ | |
347 | ||
348 | #if defined(CONFIG_PCI) | |
349 | /************************************************************************* | |
350 | * is_pci_host | |
351 | * | |
352 | * This routine is called to determine if a pci scan should be | |
353 | * performed. With various hardware environments (especially cPCI and | |
354 | * PPMC) it's insufficient to depend on the state of the arbiter enable | |
355 | * bit in the strap register, or generic host/adapter assumptions. | |
356 | * | |
357 | * Rather than hard-code a bad assumption in the general 440 code, the | |
358 | * 440 pci code requires the board to decide at runtime. | |
359 | * | |
360 | * Return 0 for adapter mode, non-zero for host (monarch) mode. | |
361 | * | |
362 | * | |
363 | ************************************************************************/ | |
364 | int is_pci_host(struct pci_controller *hose) | |
365 | { | |
366 | /* The katmai board is always configured as host. */ | |
367 | return 1; | |
368 | } | |
369 | ||
ba58e4c9 SR |
370 | int katmai_pcie_card_present(int port) |
371 | { | |
372 | u32 val; | |
373 | ||
374 | val = in32(GPIO0_IR); | |
375 | switch (port) { | |
376 | case 0: | |
377 | return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT0)); | |
378 | case 1: | |
379 | return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT1)); | |
380 | case 2: | |
381 | return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT2)); | |
382 | default: | |
383 | return 0; | |
384 | } | |
385 | } | |
386 | ||
4745acaa SR |
387 | static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; |
388 | ||
7f191393 | 389 | void pcie_setup_hoses(int busno) |
4745acaa SR |
390 | { |
391 | struct pci_controller *hose; | |
392 | int i, bus; | |
d4cb2d17 | 393 | int ret = 0; |
6efc1fc0 GB |
394 | char *env; |
395 | unsigned int delay; | |
4745acaa SR |
396 | |
397 | /* | |
398 | * assume we're called after the PCIX hose is initialized, which takes | |
399 | * bus ID 0 and therefore start numbering PCIe's from 1. | |
400 | */ | |
7f191393 | 401 | bus = busno; |
4745acaa | 402 | for (i = 0; i <= 2; i++) { |
ba58e4c9 SR |
403 | /* Check for katmai card presence */ |
404 | if (!katmai_pcie_card_present(i)) | |
405 | continue; | |
406 | ||
654f38b3 | 407 | if (is_end_point(i)) |
d4cb2d17 | 408 | ret = ppc4xx_init_pcie_endport(i); |
654f38b3 | 409 | else |
d4cb2d17 | 410 | ret = ppc4xx_init_pcie_rootport(i); |
d4cb2d17 | 411 | if (ret) { |
654f38b3 SR |
412 | printf("PCIE%d: initialization as %s failed\n", i, |
413 | is_end_point(i) ? "endpoint" : "root-complex"); | |
4745acaa SR |
414 | continue; |
415 | } | |
416 | ||
417 | hose = &pcie_hose[i]; | |
418 | hose->first_busno = bus; | |
7f191393 GB |
419 | hose->last_busno = bus; |
420 | hose->current_busno = bus; | |
4745acaa SR |
421 | |
422 | /* setup mem resource */ | |
423 | pci_set_region(hose->regions + 0, | |
424 | CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE, | |
425 | CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE, | |
426 | CFG_PCIE_MEMSIZE, | |
d4cb2d17 | 427 | PCI_REGION_MEM); |
4745acaa SR |
428 | hose->region_count = 1; |
429 | pci_register_hose(hose); | |
430 | ||
d4cb2d17 SR |
431 | if (is_end_point(i)) { |
432 | ppc4xx_setup_pcie_endpoint(hose, i); | |
433 | /* | |
434 | * Reson for no scanning is endpoint can not generate | |
435 | * upstream configuration accesses. | |
436 | */ | |
437 | } else { | |
438 | ppc4xx_setup_pcie_rootpoint(hose, i); | |
439 | env = getenv ("pciscandelay"); | |
440 | if (env != NULL) { | |
441 | delay = simple_strtoul(env, NULL, 10); | |
442 | if (delay > 5) | |
443 | printf("Warning, expect noticable delay before " | |
444 | "PCIe scan due to 'pciscandelay' value!\n"); | |
445 | mdelay(delay * 1000); | |
446 | } | |
447 | ||
448 | /* | |
449 | * Config access can only go down stream | |
450 | */ | |
451 | hose->last_busno = pci_hose_scan(hose); | |
452 | bus = hose->last_busno + 1; | |
6efc1fc0 | 453 | } |
4745acaa SR |
454 | } |
455 | } | |
456 | #endif /* defined(CONFIG_PCI) */ | |
457 | ||
458 | int misc_init_f (void) | |
459 | { | |
460 | uint reg; | |
461 | #if defined(CONFIG_STRESS) | |
462 | uint i ; | |
463 | uint disp; | |
464 | #endif | |
465 | ||
466 | /* minimal init for PCIe */ | |
467 | #if 0 /* test-only: test endpoint at some time, for now rootpoint only */ | |
468 | /* pci express 0 Endpoint Mode */ | |
469 | mfsdr(SDR0_PE0DLPSET, reg); | |
470 | reg &= (~0x00400000); | |
471 | mtsdr(SDR0_PE0DLPSET, reg); | |
472 | #else | |
473 | /* pci express 0 Rootpoint Mode */ | |
474 | mfsdr(SDR0_PE0DLPSET, reg); | |
475 | reg |= 0x00400000; | |
476 | mtsdr(SDR0_PE0DLPSET, reg); | |
477 | #endif | |
478 | /* pci express 1 Rootpoint Mode */ | |
479 | mfsdr(SDR0_PE1DLPSET, reg); | |
480 | reg |= 0x00400000; | |
481 | mtsdr(SDR0_PE1DLPSET, reg); | |
482 | /* pci express 2 Rootpoint Mode */ | |
483 | mfsdr(SDR0_PE2DLPSET, reg); | |
484 | reg |= 0x00400000; | |
485 | mtsdr(SDR0_PE2DLPSET, reg); | |
486 | ||
487 | #if defined(CONFIG_STRESS) | |
488 | /* | |
489 | * All this setting done by linux only needed by stress an charac. test | |
490 | * procedure | |
491 | * PCIe 1 Rootpoint PCIe2 Endpoint | |
492 | * PCIe 0 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level | |
493 | */ | |
494 | for (i=0,disp=0; i<8; i++,disp+=3) { | |
495 | mfsdr(SDR0_PE0HSSSET1L0+disp, reg); | |
496 | reg |= 0x33000000; | |
497 | mtsdr(SDR0_PE0HSSSET1L0+disp, reg); | |
498 | } | |
499 | ||
500 | /*PCIe 1 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level */ | |
501 | for (i=0,disp=0; i<4; i++,disp+=3) { | |
502 | mfsdr(SDR0_PE1HSSSET1L0+disp, reg); | |
503 | reg |= 0x33000000; | |
504 | mtsdr(SDR0_PE1HSSSET1L0+disp, reg); | |
505 | } | |
506 | ||
507 | /*PCIE 2 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level */ | |
508 | for (i=0,disp=0; i<4; i++,disp+=3) { | |
509 | mfsdr(SDR0_PE2HSSSET1L0+disp, reg); | |
510 | reg |= 0x33000000; | |
511 | mtsdr(SDR0_PE2HSSSET1L0+disp, reg); | |
512 | } | |
513 | ||
514 | reg = 0x21242222; | |
515 | mtsdr(SDR0_PE2UTLSET1, reg); | |
516 | reg = 0x11000000; | |
517 | mtsdr(SDR0_PE2UTLSET2, reg); | |
518 | /* pci express 1 Endpoint Mode */ | |
519 | reg = 0x00004000; | |
520 | mtsdr(SDR0_PE2DLPSET, reg); | |
521 | ||
522 | mtsdr(SDR0_UART1, 0x2080005a); /* patch for TG */ | |
523 | #endif | |
524 | ||
525 | return 0; | |
526 | } | |
527 | ||
528 | #ifdef CONFIG_POST | |
529 | /* | |
530 | * Returns 1 if keys pressed to start the power-on long-running tests | |
531 | * Called from board_init_f(). | |
532 | */ | |
533 | int post_hotkeys_pressed(void) | |
534 | { | |
535 | return (ctrlc()); | |
536 | } | |
537 | #endif | |
bf8324e4 SR |
538 | |
539 | #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) | |
540 | void ft_board_setup(void *blob, bd_t *bd) | |
541 | { | |
542 | u32 val[4]; | |
543 | int rc; | |
544 | ||
545 | ft_cpu_setup(blob, bd); | |
546 | ||
547 | /* Fixup NOR mapping */ | |
548 | val[0] = 0; /* chip select number */ | |
549 | val[1] = 0; /* always 0 */ | |
550 | val[2] = gd->bd->bi_flashstart; | |
551 | val[3] = gd->bd->bi_flashsize; | |
552 | rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", | |
553 | val, sizeof(val), 1); | |
554 | if (rc) | |
555 | printf("Unable to update property NOR mapping, err=%s\n", | |
556 | fdt_strerror(rc)); | |
557 | } | |
558 | #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ |