[people/ms/u-boot.git] / board / atmel / sama5d4_xplained / sama5d4_xplained.c

/*
 * Copyright (C) 2014 Atmel
 *		      Bo Shen <voice.shen@atmel.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/atmel_usba_udc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/sama5d4.h>
#include <atmel_hlcdc.h>
#include <atmel_mci.h>
#include <lcd.h>
#include <mmc.h>
#include <net.h>
#include <netdev.h>
#include <nand.h>
#include <spi.h>
#include <version.h>

DECLARE_GLOBAL_DATA_PTR;

#ifdef CONFIG_ATMEL_SPI
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
	return bus == 0 && cs == 0;
}

void spi_cs_activate(struct spi_slave *slave)
{
	at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
}

void spi_cs_deactivate(struct spi_slave *slave)
{
	at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
}

static void sama5d4_xplained_spi0_hw_init(void)
{
	at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* SPI0_MISO */
	at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* SPI0_MOSI */
	at91_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* SPI0_SPCK */

	at91_set_pio_output(AT91_PIO_PORTC, 3, 1);	/* SPI0_CS0 */

	/* Enable clock */
	at91_periph_clk_enable(ATMEL_ID_SPI0);
}
#endif /* CONFIG_ATMEL_SPI */

#ifdef CONFIG_NAND_ATMEL
static void sama5d4_xplained_nand_hw_init(void)
{
	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;

	at91_periph_clk_enable(ATMEL_ID_SMC);

	/* Configure SMC CS3 for NAND */
	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
	       AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1),
	       &smc->cs[3].setup);
	writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(3) |
	       AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3),
	       &smc->cs[3].pulse);
	writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
	       &smc->cs[3].cycle);
	writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) |
	       AT91_SMC_TIMINGS_TAR(2)  | AT91_SMC_TIMINGS_TRR(3)   |
	       AT91_SMC_TIMINGS_TWB(7)  | AT91_SMC_TIMINGS_RBNSEL(3)|
	       AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
	       AT91_SMC_MODE_EXNW_DISABLE |
	       AT91_SMC_MODE_DBW_8 |
	       AT91_SMC_MODE_TDF_CYCLE(3),
	       &smc->cs[3].mode);

	at91_set_a_periph(AT91_PIO_PORTC, 5, 0);	/* D0 */
	at91_set_a_periph(AT91_PIO_PORTC, 6, 0);	/* D1 */
	at91_set_a_periph(AT91_PIO_PORTC, 7, 0);	/* D2 */
	at91_set_a_periph(AT91_PIO_PORTC, 8, 0);	/* D3 */
	at91_set_a_periph(AT91_PIO_PORTC, 9, 0);	/* D4 */
	at91_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* D5 */
	at91_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* D6 */
	at91_set_a_periph(AT91_PIO_PORTC, 12, 0);	/* D7 */
	at91_set_a_periph(AT91_PIO_PORTC, 13, 0);	/* RE */
	at91_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* WE */
	at91_set_a_periph(AT91_PIO_PORTC, 15, 1);	/* NCS */
	at91_set_a_periph(AT91_PIO_PORTC, 16, 1);	/* RDY */
	at91_set_a_periph(AT91_PIO_PORTC, 17, 1);	/* ALE */
	at91_set_a_periph(AT91_PIO_PORTC, 18, 1);	/* CLE */
}
#endif

#ifdef CONFIG_CMD_USB
static void sama5d4_xplained_usb_hw_init(void)
{
	at91_set_pio_output(AT91_PIO_PORTE, 11, 1);
	at91_set_pio_output(AT91_PIO_PORTE, 14, 1);
}
#endif

#ifdef CONFIG_LCD
vidinfo_t panel_info = {
	.vl_col = 480,
	.vl_row = 272,
	.vl_clk = 9000000,
	.vl_bpix = LCD_BPP,
	.vl_tft = 1,
	.vl_hsync_len = 41,
	.vl_left_margin = 2,
	.vl_right_margin = 2,
	.vl_vsync_len = 11,
	.vl_upper_margin = 2,
	.vl_lower_margin = 2,
	.mmio = ATMEL_BASE_LCDC,
};

/* No power up/down pin for the LCD pannel */
void lcd_enable(void)	{ /* Empty! */ }
void lcd_disable(void)	{ /* Empty! */ }

unsigned int has_lcdc(void)
{
	return 1;
}

static void sama5d4_xplained_lcd_hw_init(void)
{
	at91_set_a_periph(AT91_PIO_PORTA, 24, 0);	/* LCDPWM */
	at91_set_a_periph(AT91_PIO_PORTA, 25, 0);	/* LCDDISP */
	at91_set_a_periph(AT91_PIO_PORTA, 26, 0);	/* LCDVSYNC */
	at91_set_a_periph(AT91_PIO_PORTA, 27, 0);	/* LCDHSYNC */
	at91_set_a_periph(AT91_PIO_PORTA, 28, 0);	/* LCDDOTCK */
	at91_set_a_periph(AT91_PIO_PORTA, 29, 0);	/* LCDDEN */

	at91_set_a_periph(AT91_PIO_PORTA,  0, 0);	/* LCDD0 */
	at91_set_a_periph(AT91_PIO_PORTA,  1, 0);	/* LCDD1 */
	at91_set_a_periph(AT91_PIO_PORTA,  2, 0);	/* LCDD2 */
	at91_set_a_periph(AT91_PIO_PORTA,  3, 0);	/* LCDD3 */
	at91_set_a_periph(AT91_PIO_PORTA,  4, 0);	/* LCDD4 */
	at91_set_a_periph(AT91_PIO_PORTA,  5, 0);	/* LCDD5 */
	at91_set_a_periph(AT91_PIO_PORTA,  6, 0);	/* LCDD6 */
	at91_set_a_periph(AT91_PIO_PORTA,  7, 0);	/* LCDD7 */

	at91_set_a_periph(AT91_PIO_PORTA,  8, 0);	/* LCDD9 */
	at91_set_a_periph(AT91_PIO_PORTA,  9, 0);	/* LCDD8 */
	at91_set_a_periph(AT91_PIO_PORTA, 10, 0);	/* LCDD10 */
	at91_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* LCDD11 */
	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* LCDD12 */
	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* LCDD13 */
	at91_set_a_periph(AT91_PIO_PORTA, 14, 0);	/* LCDD14 */
	at91_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* LCDD15 */

	at91_set_a_periph(AT91_PIO_PORTA, 16, 0);	/* LCDD16 */
	at91_set_a_periph(AT91_PIO_PORTA, 17, 0);	/* LCDD17 */
	at91_set_a_periph(AT91_PIO_PORTA, 18, 0);	/* LCDD18 */
	at91_set_a_periph(AT91_PIO_PORTA, 19, 0);	/* LCDD19 */
	at91_set_a_periph(AT91_PIO_PORTA, 20, 0);	/* LCDD20 */
	at91_set_a_periph(AT91_PIO_PORTA, 21, 0);	/* LCDD21 */
	at91_set_a_periph(AT91_PIO_PORTA, 22, 0);	/* LCDD22 */
	at91_set_a_periph(AT91_PIO_PORTA, 23, 0);	/* LCDD23 */

	/* Enable clock */
	at91_periph_clk_enable(ATMEL_ID_LCDC);
}

#ifdef CONFIG_LCD_INFO
void lcd_show_board_info(void)
{
	ulong dram_size, nand_size;
	int i;
	char temp[32];

	lcd_printf("%s\n", U_BOOT_VERSION);
	lcd_printf("2014 ATMEL Corp\n");
	lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
		   strmhz(temp, get_cpu_clk_rate()));

	dram_size = 0;
	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
		dram_size += gd->bd->bi_dram[i].size;

	nand_size = 0;
#ifdef CONFIG_NAND_ATMEL
	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
		nand_size += nand_info[i].size;
#endif
	lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
		   dram_size >> 20, nand_size >> 20);
}
#endif /* CONFIG_LCD_INFO */

#endif /* CONFIG_LCD */

#ifdef CONFIG_GENERIC_ATMEL_MCI
void sama5d4_xplained_mci1_hw_init(void)
{
	at91_set_c_periph(AT91_PIO_PORTE, 19, 1);	/* MCI1 CDA */
	at91_set_c_periph(AT91_PIO_PORTE, 20, 1);	/* MCI1 DA0 */
	at91_set_c_periph(AT91_PIO_PORTE, 21, 1);	/* MCI1 DA1 */
	at91_set_c_periph(AT91_PIO_PORTE, 22, 1);	/* MCI1 DA2 */
	at91_set_c_periph(AT91_PIO_PORTE, 23, 1);	/* MCI1 DA3 */
	at91_set_c_periph(AT91_PIO_PORTE, 18, 0);	/* MCI1 CLK */

	/*
	 * As the mci io internal pull down is too strong, so if the io needs
	 * external pull up, the pull up resistor will be very small, if so
	 * the power consumption will increase, so disable the interanl pull
	 * down to save the power.
	 */
	at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
	at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
	at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
	at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
	at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
	at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);

	/* Enable clock */
	at91_periph_clk_enable(ATMEL_ID_MCI1);
}

int board_mmc_init(bd_t *bis)
{
	/* Enable the power supply */
	at91_set_pio_output(AT91_PIO_PORTE, 4, 0);

	return atmel_mci_init((void *)ATMEL_BASE_MCI1);
}
#endif /* CONFIG_GENERIC_ATMEL_MCI */

#ifdef CONFIG_MACB
void sama5d4_xplained_macb0_hw_init(void)
{
	at91_set_a_periph(AT91_PIO_PORTB, 0, 0);	/* ETXCK_EREFCK */
	at91_set_a_periph(AT91_PIO_PORTB, 6, 0);	/* ERXDV */
	at91_set_a_periph(AT91_PIO_PORTB, 8, 0);	/* ERX0 */
	at91_set_a_periph(AT91_PIO_PORTB, 9, 0);	/* ERX1 */
	at91_set_a_periph(AT91_PIO_PORTB, 7, 0);	/* ERXER */
	at91_set_a_periph(AT91_PIO_PORTB, 2, 0);	/* ETXEN */
	at91_set_a_periph(AT91_PIO_PORTB, 12, 0);	/* ETX0 */
	at91_set_a_periph(AT91_PIO_PORTB, 13, 0);	/* ETX1 */
	at91_set_a_periph(AT91_PIO_PORTB, 17, 0);	/* EMDIO */
	at91_set_a_periph(AT91_PIO_PORTB, 16, 0);	/* EMDC */

	/* Enable clock */
	at91_periph_clk_enable(ATMEL_ID_GMAC0);
}
#endif

static void sama5d4_xplained_serial3_hw_init(void)
{
	at91_set_b_periph(AT91_PIO_PORTE, 17, 1);	/* TXD3 */
	at91_set_b_periph(AT91_PIO_PORTE, 16, 0);	/* RXD3 */

	/* Enable clock */
	at91_periph_clk_enable(ATMEL_ID_USART3);
}

int board_early_init_f(void)
{
	at91_periph_clk_enable(ATMEL_ID_PIOA);
	at91_periph_clk_enable(ATMEL_ID_PIOB);
	at91_periph_clk_enable(ATMEL_ID_PIOC);
	at91_periph_clk_enable(ATMEL_ID_PIOD);
	at91_periph_clk_enable(ATMEL_ID_PIOE);

	sama5d4_xplained_serial3_hw_init();

	return 0;
}

int board_init(void)
{
	/* adress of boot parameters */
	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;

#ifdef CONFIG_ATMEL_SPI
	sama5d4_xplained_spi0_hw_init();
#endif
#ifdef CONFIG_NAND_ATMEL
	sama5d4_xplained_nand_hw_init();
#endif
#ifdef CONFIG_GENERIC_ATMEL_MCI
	sama5d4_xplained_mci1_hw_init();
#endif
#ifdef CONFIG_MACB
	sama5d4_xplained_macb0_hw_init();
#endif
#ifdef CONFIG_LCD
	sama5d4_xplained_lcd_hw_init();
#endif
#ifdef CONFIG_CMD_USB
	sama5d4_xplained_usb_hw_init();
#endif
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
	at91_udp_hw_init();
#endif

	return 0;
}

int dram_init(void)
{
	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
				    CONFIG_SYS_SDRAM_SIZE);
	return 0;
}

int board_eth_init(bd_t *bis)
{
	int rc = 0;

#ifdef CONFIG_MACB
	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
#endif

#ifdef CONFIG_USB_GADGET_ATMEL_USBA
	usba_udc_probe(&pdata);
#ifdef CONFIG_USB_ETH_RNDIS
	usb_eth_initialize(bis);
#endif
#endif

	return rc;
}

/* SPL */
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
#ifdef CONFIG_SYS_USE_MMC
	sama5d4_xplained_mci1_hw_init();
#elif CONFIG_SYS_USE_NANDFLASH
	sama5d4_xplained_nand_hw_init();
#elif CONFIG_SYS_USE_SERIALFLASH
	sama5d4_xplained_spi0_hw_init();
#endif
}

static void ddr2_conf(struct atmel_mpddr *ddr2)
{
	ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);

	ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
		    ATMEL_MPDDRC_CR_NR_ROW_14 |
		    ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
		    ATMEL_MPDDRC_CR_NB_8BANKS |
		    ATMEL_MPDDRC_CR_NDQS_DISABLED |
		    ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
		    ATMEL_MPDDRC_CR_UNAL_SUPPORTED);

	ddr2->rtr = 0x2b0;

	ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
		      3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
		      3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
		      10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
		      3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
		      2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
		      2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
		      2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);

	ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
		      200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
		      25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
		      23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);

	ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
		      2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
		      3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
		      2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
		      8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
}

void mem_init(void)
{
	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
	struct atmel_mpddr ddr2;

	ddr2_conf(&ddr2);

	/* enable MPDDR clock */
	at91_periph_clk_enable(ATMEL_ID_MPDDRC);
	writel(AT91_PMC_DDR, &pmc->scer);

	/* DDRAM2 Controller initialize */
	ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
}

void at91_pmc_init(void)
{
	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
	u32 tmp;

	tmp = AT91_PMC_PLLAR_29 |
	      AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
	      AT91_PMC_PLLXR_MUL(87) |
	      AT91_PMC_PLLXR_DIV(1);
	at91_plla_init(tmp);

	writel(0x0 << 8, &pmc->pllicpr);

	tmp = AT91_PMC_MCKR_H32MXDIV |
	      AT91_PMC_MCKR_PLLADIV_2 |
	      AT91_PMC_MCKR_MDIV_3 |
	      AT91_PMC_MCKR_CSS_PLLA;
	at91_mck_init(tmp);
}
#endif
Commit	Line	Data
f196044d BS	1	/*
	2	* Copyright (C) 2014 Atmel
	3	* Bo Shen <voice.shen@atmel.com>
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	#include <common.h>
	9	#include <asm/io.h>
	10	#include <asm/arch/at91_common.h>
	11	#include <asm/arch/at91_pmc.h>
	12	#include <asm/arch/at91_rstc.h>
0b2a9824	13	#include <asm/arch/atmel_mpddrc.h>
4f26c8ca	14	#include <asm/arch/atmel_usba_udc.h>
f196044d BS	15	#include <asm/arch/gpio.h>
	16	#include <asm/arch/clk.h>
	17	#include <asm/arch/sama5d3_smc.h>
	18	#include <asm/arch/sama5d4.h>
77d5b407	19	#include <atmel_hlcdc.h>
f196044d BS	20	#include <atmel_mci.h>
	21	#include <lcd.h>
	22	#include <mmc.h>
	23	#include <net.h>
	24	#include <netdev.h>
	25	#include <nand.h>
	26	#include <spi.h>
02fc64d1	27	#include <version.h>
f196044d BS	28
	29	DECLARE_GLOBAL_DATA_PTR;
	30
	31	#ifdef CONFIG_ATMEL_SPI
	32	int spi_cs_is_valid(unsigned int bus, unsigned int cs)
	33	{
	34	return bus == 0 && cs == 0;
	35	}
	36
	37	void spi_cs_activate(struct spi_slave *slave)
	38	{
	39	at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
	40	}
	41
	42	void spi_cs_deactivate(struct spi_slave *slave)
	43	{
	44	at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
	45	}
	46
	47	static void sama5d4_xplained_spi0_hw_init(void)
	48	{
	49	at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
	50	at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
	51	at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
	52
	53	at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
	54
	55	/* Enable clock */
	56	at91_periph_clk_enable(ATMEL_ID_SPI0);
	57	}
	58	#endif /* CONFIG_ATMEL_SPI */
	59
	60	#ifdef CONFIG_NAND_ATMEL
	61	static void sama5d4_xplained_nand_hw_init(void)
	62	{
	63	struct at91_smc smc = (struct at91_smc )ATMEL_BASE_SMC;
	64
	65	at91_periph_clk_enable(ATMEL_ID_SMC);
	66
	67	/* Configure SMC CS3 for NAND */
	68	writel(AT91_SMC_SETUP_NWE(1) \| AT91_SMC_SETUP_NCS_WR(1) \|
	69	AT91_SMC_SETUP_NRD(1) \| AT91_SMC_SETUP_NCS_RD(1),
	70	&smc->cs[3].setup);
	71	writel(AT91_SMC_PULSE_NWE(2) \| AT91_SMC_PULSE_NCS_WR(3) \|
	72	AT91_SMC_PULSE_NRD(2) \| AT91_SMC_PULSE_NCS_RD(3),
	73	&smc->cs[3].pulse);
	74	writel(AT91_SMC_CYCLE_NWE(5) \| AT91_SMC_CYCLE_NRD(5),
	75	&smc->cs[3].cycle);
	76	writel(AT91_SMC_TIMINGS_TCLR(2) \| AT91_SMC_TIMINGS_TADL(7) \|
	77	AT91_SMC_TIMINGS_TAR(2) \| AT91_SMC_TIMINGS_TRR(3) \|
	78	AT91_SMC_TIMINGS_TWB(7) \| AT91_SMC_TIMINGS_RBNSEL(3)\|
	79	AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
	80	writel(AT91_SMC_MODE_RM_NRD \| AT91_SMC_MODE_WM_NWE \|
	81	AT91_SMC_MODE_EXNW_DISABLE \|
	82	AT91_SMC_MODE_DBW_8 \|
	83	AT91_SMC_MODE_TDF_CYCLE(3),
	84	&smc->cs[3].mode);
	85
	86	at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */
	87	at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */
	88	at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */
	89	at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */
	90	at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */
	91	at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */
92	at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */
93	at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */
94	at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */
95	at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */
96	at91_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */
97	at91_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */
98	at91_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */
99	at91_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */
100	}
101	#endif
102
103	#ifdef CONFIG_CMD_USB
104	static void sama5d4_xplained_usb_hw_init(void)
105	{
106	at91_set_pio_output(AT91_PIO_PORTE, 11, 1);
107	at91_set_pio_output(AT91_PIO_PORTE, 14, 1);
108	}
109	#endif
110
111	#ifdef CONFIG_LCD
112	vidinfo_t panel_info = {
113	.vl_col = 480,
114	.vl_row = 272,
77d5b407	115	.vl_clk = 9000000,
f196044d	116	.vl_bpix = LCD_BPP,
f196044d BS	117	.vl_tft = 1,
	118	.vl_hsync_len = 41,
	119	.vl_left_margin = 2,
	120	.vl_right_margin = 2,
	121	.vl_vsync_len = 11,
	122	.vl_upper_margin = 2,
	123	.vl_lower_margin = 2,
	124	.mmio = ATMEL_BASE_LCDC,
	125	};
	126
	127	/* No power up/down pin for the LCD pannel */
	128	void lcd_enable(void) { /* Empty! */ }
	129	void lcd_disable(void) { /* Empty! */ }
	130
	131	unsigned int has_lcdc(void)
	132	{
	133	return 1;
	134	}
	135
	136	static void sama5d4_xplained_lcd_hw_init(void)
	137	{
	138	at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
	139	at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
	140	at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
	141	at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
	142	at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
	143	at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
	144
	145	at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
	146	at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
	147	at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
	148	at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
	149	at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
	150	at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
	151	at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
	152	at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
	153
	154	at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
	155	at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
	156	at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
	157	at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
	158	at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
	159	at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
	160	at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
	161	at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
	162
	163	at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
	164	at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
	165	at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
	166	at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
	167	at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
	168	at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
	169	at91_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
	170	at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
	171
	172	/* Enable clock */
	173	at91_periph_clk_enable(ATMEL_ID_LCDC);
	174	}
	175
	176	#ifdef CONFIG_LCD_INFO
	177	void lcd_show_board_info(void)
	178	{
	179	ulong dram_size, nand_size;
	180	int i;
181	char temp[32];
182
02fc64d1	183	lcd_printf("%s\n", U_BOOT_VERSION);
f196044d BS	184	lcd_printf("2014 ATMEL Corp\n");
	185	lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
	186	strmhz(temp, get_cpu_clk_rate()));
	187
	188	dram_size = 0;
	189	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
	190	dram_size += gd->bd->bi_dram[i].size;
	191
	192	nand_size = 0;
	193	#ifdef CONFIG_NAND_ATMEL
	194	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
	195	nand_size += nand_info[i].size;
	196	#endif
	197	lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
	198	dram_size >> 20, nand_size >> 20);
	199	}
	200	#endif /* CONFIG_LCD_INFO */
	201
	202	#endif /* CONFIG_LCD */
	203
	204	#ifdef CONFIG_GENERIC_ATMEL_MCI
	205	void sama5d4_xplained_mci1_hw_init(void)
	206	{
	207	at91_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
	208	at91_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
	209	at91_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
	210	at91_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
	211	at91_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
	212	at91_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
	213
	214	/*
	215	* As the mci io internal pull down is too strong, so if the io needs
	216	* external pull up, the pull up resistor will be very small, if so
	217	* the power consumption will increase, so disable the interanl pull
	218	* down to save the power.
	219	*/
	220	at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
	221	at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
	222	at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
	223	at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
	224	at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
	225	at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
	226
	227	/* Enable clock */
	228	at91_periph_clk_enable(ATMEL_ID_MCI1);
	229	}
	230
	231	int board_mmc_init(bd_t *bis)
	232	{
66bfce55 BS	233	/* Enable the power supply */
	234	at91_set_pio_output(AT91_PIO_PORTE, 4, 0);
	235
f196044d BS	236	return atmel_mci_init((void *)ATMEL_BASE_MCI1);
	237	}
	238	#endif /* CONFIG_GENERIC_ATMEL_MCI */
	239
	240	#ifdef CONFIG_MACB
	241	void sama5d4_xplained_macb0_hw_init(void)
	242	{
	243	at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
	244	at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
	245	at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
	246	at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
	247	at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
	248	at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
	249	at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
	250	at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
	251	at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
	252	at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
	253
	254	/* Enable clock */
	255	at91_periph_clk_enable(ATMEL_ID_GMAC0);
	256	}
	257	#endif
	258
	259	static void sama5d4_xplained_serial3_hw_init(void)
	260	{
	261	at91_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */
	262	at91_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */
	263
	264	/* Enable clock */
	265	at91_periph_clk_enable(ATMEL_ID_USART3);
	266	}
	267
	268	int board_early_init_f(void)
	269	{
	270	at91_periph_clk_enable(ATMEL_ID_PIOA);
	271	at91_periph_clk_enable(ATMEL_ID_PIOB);
	272	at91_periph_clk_enable(ATMEL_ID_PIOC);
	273	at91_periph_clk_enable(ATMEL_ID_PIOD);
	274	at91_periph_clk_enable(ATMEL_ID_PIOE);
	275
	276	sama5d4_xplained_serial3_hw_init();
	277
	278	return 0;
	279	}
	280
	281	int board_init(void)
	282	{
	283	/* adress of boot parameters */
	284	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
	285
	286	#ifdef CONFIG_ATMEL_SPI
	287	sama5d4_xplained_spi0_hw_init();
	288	#endif
	289	#ifdef CONFIG_NAND_ATMEL
	290	sama5d4_xplained_nand_hw_init();
	291	#endif
	292	#ifdef CONFIG_GENERIC_ATMEL_MCI
	293	sama5d4_xplained_mci1_hw_init();
	294	#endif
	295	#ifdef CONFIG_MACB
	296	sama5d4_xplained_macb0_hw_init();
	297	#endif
	298	#ifdef CONFIG_LCD
	299	sama5d4_xplained_lcd_hw_init();
300	#endif
301	#ifdef CONFIG_CMD_USB
302	sama5d4_xplained_usb_hw_init();
303	#endif
4f26c8ca BS	304	#ifdef CONFIG_USB_GADGET_ATMEL_USBA
	305	at91_udp_hw_init();
	306	#endif
f196044d BS	307
	308	return 0;
	309	}
	310
	311	int dram_init(void)
	312	{
	313	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
	314	CONFIG_SYS_SDRAM_SIZE);
	315	return 0;
	316	}
	317
	318	int board_eth_init(bd_t *bis)
	319	{
	320	int rc = 0;
	321
	322	#ifdef CONFIG_MACB
	323	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
	324	#endif
	325
4f26c8ca BS	326	#ifdef CONFIG_USB_GADGET_ATMEL_USBA
	327	usba_udc_probe(&pdata);
	328	#ifdef CONFIG_USB_ETH_RNDIS
	329	usb_eth_initialize(bis);
	330	#endif
	331	#endif
	332
f196044d BS	333	return rc;
f196044d BS	334	}
0b2a9824 BS	335
	336	/* SPL */
	337	#ifdef CONFIG_SPL_BUILD
	338	void spl_board_init(void)
	339	{
	340	#ifdef CONFIG_SYS_USE_MMC
	341	sama5d4_xplained_mci1_hw_init();
	342	#elif CONFIG_SYS_USE_NANDFLASH
	343	sama5d4_xplained_nand_hw_init();
	344	#elif CONFIG_SYS_USE_SERIALFLASH
	345	sama5d4_xplained_spi0_hw_init();
	346	#endif
	347	}
	348
	349	static void ddr2_conf(struct atmel_mpddr *ddr2)
	350	{
	351	ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS \| ATMEL_MPDDRC_MD_DDR2_SDRAM);
	352
	353	ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 \|
	354	ATMEL_MPDDRC_CR_NR_ROW_14 \|
	355	ATMEL_MPDDRC_CR_CAS_DDR_CAS3 \|
	356	ATMEL_MPDDRC_CR_NB_8BANKS \|
	357	ATMEL_MPDDRC_CR_NDQS_DISABLED \|
	358	ATMEL_MPDDRC_CR_DECOD_INTERLEAVED \|
	359	ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
	360
	361	ddr2->rtr = 0x2b0;
	362
	363	ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET \|
	364	3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET \|
	365	3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET \|
	366	10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET \|
	367	3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET \|
	368	2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET \|
	369	2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET \|
	370	2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
	371
	372	ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET \|
	373	200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET \|
	374	25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET \|
	375	23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
	376
	377	ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET \|
	378	2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET \|
	379	3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET \|
	380	2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET \|
	381	8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
	382	}
	383
	384	void mem_init(void)
	385	{
	386	struct at91_pmc pmc = (struct at91_pmc )ATMEL_BASE_PMC;
	387	struct atmel_mpddr ddr2;
	388
	389	ddr2_conf(&ddr2);
	390
	391	/* enable MPDDR clock */
	392	at91_periph_clk_enable(ATMEL_ID_MPDDRC);
c982f6b9	393	writel(AT91_PMC_DDR, &pmc->scer);
0b2a9824 BS	394
0b2a9824 BS	395	/* DDRAM2 Controller initialize */
0c01c3e8	396	ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
0b2a9824 BS	397	}
	398
	399	void at91_pmc_init(void)
	400	{
	401	struct at91_pmc pmc = (struct at91_pmc )ATMEL_BASE_PMC;
	402	u32 tmp;
	403
	404	tmp = AT91_PMC_PLLAR_29 \|
	405	AT91_PMC_PLLXR_PLLCOUNT(0x3f) \|
	406	AT91_PMC_PLLXR_MUL(87) \|
	407	AT91_PMC_PLLXR_DIV(1);
	408	at91_plla_init(tmp);
	409
	410	writel(0x0 << 8, &pmc->pllicpr);
	411
	412	tmp = AT91_PMC_MCKR_H32MXDIV \|
	413	AT91_PMC_MCKR_PLLADIV_2 \|
	414	AT91_PMC_MCKR_MDIV_3 \|
	415	AT91_PMC_MCKR_CSS_PLLA;
	416	at91_mck_init(tmp);
	417	}
	418	#endif