]>
Commit | Line | Data |
---|---|---|
e7b9aa96 SZ |
1 | /* |
2 | * U-boot - main board file | |
3 | * | |
4 | * Copyright (c) 2008-2011 Analog Devices Inc. | |
5 | * | |
6 | * Licensed under the GPL-2 or later. | |
7 | */ | |
8 | ||
7d861d95 BL |
9 | #ifndef __BOARD_SOFT_SWITCH_H__ |
10 | #define __BOARD_SOFT_SWITCH_H__ | |
11 | ||
12 | #include <asm/soft_switch.h> | |
e7b9aa96 SZ |
13 | |
14 | /* switch 0 port A */ | |
15 | #define CAN_EN 0x1 | |
16 | #define CAN_STB 0x2 | |
17 | #define CAN0_ERR_EN 0x4 | |
18 | #define CAN0RX_EN 0x8 | |
19 | #define CNT0UD_EN 0x10 | |
20 | #define CNT0DG_EN 0x20 | |
21 | #define CNT0ZM_EN 0x40 | |
22 | #define RMII_CLK_EN 0x80 | |
23 | ||
24 | /* switch 0 port B */ | |
25 | #define UART0RTS_EN 0x1 | |
26 | #define UART0RX_EN 0x2 | |
27 | #define UART0CTS_EN 0x4 | |
28 | #define UART0CTS_RTS_LPBK 0x8 | |
29 | #define UART0CTS_RST_EN 0x10 | |
30 | #define UART0CTS_146_EN 0x20 | |
31 | #define TEMP_IRQ_EN 0x40 | |
32 | #define TEMP_THERM_EN 0x80 | |
33 | ||
34 | /* switch 1 port A */ | |
35 | #define OVERRIDE_SMC0_LP0_BOOT 0x1 | |
36 | #define SMC0_EPPI2_LP1_SWITCH 0x2 | |
37 | #define SMC0_LP0_EN 0x8 | |
38 | #define LED1_GPIO_EN 0x10 | |
39 | #define LED2_GPIO_EN 0x20 | |
40 | #define LED3_GPIO_EN 0x40 | |
41 | #define LED4_GPIO_EN 0x80 | |
42 | ||
43 | /* switch 1 port B */ | |
44 | #define PUSHBUTTON1_EN 0x1 | |
45 | #define PUSHBUTTON2_EN 0x2 | |
46 | #define SD_CD_EN 0x4 | |
47 | #define SD_WP_EN 0x8 | |
48 | #define SPIFLASH_CS_EN 0x10 | |
49 | #define SPI0D2_EN 0x20 | |
50 | #define SPI0D3_EN 0x40 | |
51 | ||
52 | /* switch 2 port A */ | |
53 | #define PHYINT_EN 0x1 | |
54 | #define PHY_PWR_DWN_INT 0x2 | |
55 | #define PHYAD0 0x4 | |
56 | #define ETHERNET_EN 0x8 | |
57 | #define WAKE_PUSHBUTTON_EN 0x10 | |
58 | #define PD0_SPI0D2_EN 0x20 | |
59 | #define PD1_SPI0D3_EN 0x40 | |
60 | #define PD2_SPI0MISO_EN 0x80 | |
61 | ||
62 | /* switch 2 port B */ | |
63 | #define PD3_SPI0MOSI_EN 0x1 | |
64 | #define PD4_SPI0CK_EN 0x2 | |
65 | ||
7d861d95 BL |
66 | #ifdef CONFIG_BFIN_BOARD_VERSION_1_0 |
67 | #define SWITCH_ADDR 0x21 | |
68 | #else | |
69 | #define SWITCH_ADDR 0x20 | |
70 | #endif | |
71 | ||
72 | #define NUM_SWITCH 3 | |
73 | #define IODIRA 0x0 | |
74 | #define IODIRB 0x1 | |
75 | #define OLATA 0x14 | |
76 | #define OLATB 0x15 | |
e7b9aa96 | 77 | |
e7b9aa96 | 78 | int setup_board_switches(void); |
7d861d95 BL |
79 | |
80 | #endif /* __BOARD_SOFT_SWITCH_H__ */ |