]>
Commit | Line | Data |
---|---|---|
381e4e63 HS |
1 | /* |
2 | * (C) Copyright 2007 | |
3 | * Heiko Schocher, DENX Software Engineering, hs@denx.de. | |
4 | * | |
5 | * See file CREDITS for list of people who contributed to this | |
6 | * project. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License as | |
10 | * published by the Free Software Foundation; either version 2 of | |
11 | * the License, or (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
21 | * MA 02111-1307 USA | |
22 | */ | |
23 | ||
24 | #if 0 | |
25 | #define DEBUG | |
26 | #endif | |
27 | ||
28 | #include <common.h> | |
29 | #include <mpc8xx.h> | |
30 | ||
31 | #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) | |
32 | #include <libfdt.h> | |
33 | #endif | |
34 | ||
35 | DECLARE_GLOBAL_DATA_PTR; | |
36 | ||
37 | const uint sdram_table[] = | |
38 | { | |
39 | 0x0f07fc04, 0x0ffffc04, 0x00bdfc04, 0x0ff77c00, | |
40 | 0x1ffffc05, 0xfffffc04, 0xfffffc04, 0xfffffc04, | |
41 | /* 0x08 Burst Read */ | |
42 | 0x0f07fc04, 0x0ffffc04, 0x00bdfc04, 0x00fffc00, | |
43 | 0x00fffc00, 0x00fffc00, 0x0ff77c00, 0x1ffffc05, | |
44 | /* 0x10 Load mode register */ | |
45 | 0x0ffffc34, 0x0ff57c04, 0x0ffffc04, 0x1ffffc05, | |
46 | 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, | |
47 | /* 0x18 Single Write */ | |
48 | 0x0f07fc04, 0x0ffffc00, 0x00bd7c04, 0x0ffffc04, | |
49 | 0x0ff77c04, 0x1ffffc05, 0xfffffc04, 0xfffffc04, | |
50 | /* 0x20 Burst Write */ | |
51 | 0x0f07fc04, 0x0ffffc00, 0x00bd7c00, 0x00fffc00, | |
52 | 0x00fffc00, 0x00fffc04, 0x0ffffc04, 0x0ff77c04, | |
53 | 0x1ffffc05, 0xfffffc04, 0xfffffc04, 0xfffffc04, | |
54 | 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, | |
55 | /* 0x30 Precharge all and Refresh */ | |
56 | 0x0ff77c04, 0x0ffffc04, 0x0ff5fc84, 0x0ffffc04, | |
57 | 0x0ffffc04, 0x0ffffc84, 0x1ffffc05, 0xfffffc04, | |
58 | 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, | |
59 | /* 0x3C Exception */ | |
60 | 0x7ffffc04, 0xfffffc07, 0xfffffc04, 0xfffffc04, | |
61 | }; | |
62 | ||
63 | int checkboard (void) | |
64 | { | |
65 | puts ("Board: Keymile mgsuvd\n"); | |
66 | return (0); | |
67 | } | |
68 | ||
9973e3c6 | 69 | phys_size_t initdram (int board_type) |
381e4e63 HS |
70 | { |
71 | volatile immap_t *immap = (immap_t *) CFG_IMMR; | |
72 | volatile memctl8xx_t *memctl = &immap->im_memctl; | |
73 | long int size; | |
74 | ||
75 | upmconfig (UPMB, (uint *) sdram_table, | |
76 | sizeof (sdram_table) / sizeof (uint)); | |
77 | ||
78 | /* | |
79 | * Preliminary prescaler for refresh (depends on number of | |
80 | * banks): This value is selected for four cycles every 62.4 us | |
81 | * with two SDRAM banks or four cycles every 31.2 us with one | |
82 | * bank. It will be adjusted after memory sizing. | |
83 | */ | |
84 | memctl->memc_mptpr = CFG_MPTPR; | |
85 | ||
86 | /* | |
87 | * The following value is used as an address (i.e. opcode) for | |
88 | * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If | |
89 | * the port size is 32bit the SDRAM does NOT "see" the lower two | |
90 | * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for | |
91 | * MICRON SDRAMs: | |
92 | * -> 0 00 010 0 010 | |
93 | * | | | | +- Burst Length = 4 | |
94 | * | | | +----- Burst Type = Sequential | |
95 | * | | +------- CAS Latency = 2 | |
96 | * | +----------- Operating Mode = Standard | |
97 | * +-------------- Write Burst Mode = Programmed Burst Length | |
98 | */ | |
99 | memctl->memc_mar = CFG_MAR; | |
100 | ||
101 | /* | |
102 | * Map controller banks 1 to the SDRAM banks 1 at | |
103 | * preliminary addresses - these have to be modified after the | |
104 | * SDRAM size has been determined. | |
105 | */ | |
106 | memctl->memc_or1 = CFG_OR1_PRELIM; | |
107 | memctl->memc_br1 = CFG_BR1_PRELIM; | |
108 | ||
109 | memctl->memc_mbmr = CFG_MBMR & (~(MBMR_PTBE)); /* no refresh yet */ | |
110 | ||
111 | udelay (200); | |
112 | ||
113 | /* perform SDRAM initializsation sequence */ | |
114 | ||
115 | memctl->memc_mcr = 0x80802830; /* SDRAM bank 0 */ | |
116 | udelay (1); | |
117 | memctl->memc_mcr = 0x80802110; /* SDRAM bank 0 - execute twice */ | |
118 | udelay (1); | |
119 | ||
120 | memctl->memc_mbmr |= MBMR_PTBE; /* enable refresh */ | |
121 | ||
122 | udelay (1000); | |
123 | ||
124 | /* | |
125 | * Check Bank 0 Memory Size for re-configuration | |
126 | * | |
127 | */ | |
128 | size = get_ram_size(SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); | |
129 | ||
130 | udelay (1000); | |
131 | ||
132 | debug ("SDRAM Bank 0: %ld MB\n", size >> 20); | |
133 | ||
134 | return (size); | |
135 | } | |
136 | ||
82afabfe HS |
137 | /* |
138 | * Early board initalization. | |
139 | */ | |
140 | int board_early_init_r(void) | |
141 | { | |
142 | /* setup the UPIOx */ | |
143 | *(char *)(CFG_PIGGY_BASE + 0x02) = 0xc0; | |
144 | *(char *)(CFG_PIGGY_BASE + 0x03) = 0x35; | |
145 | return 0; | |
146 | } | |
147 | ||
381e4e63 HS |
148 | #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) |
149 | /* | |
150 | * update "memory" property in the blob | |
151 | */ | |
152 | void ft_blob_update(void *blob, bd_t *bd) | |
153 | { | |
154 | int ret, nodeoffset = 0; | |
155 | ulong brg_data[1] = {0}; | |
156 | ulong memory_data[2] = {0}; | |
157 | ulong flash_data[4] = {0}; | |
158 | ||
159 | memory_data[0] = cpu_to_be32(bd->bi_memstart); | |
160 | memory_data[1] = cpu_to_be32(bd->bi_memsize); | |
161 | ||
162 | nodeoffset = fdt_path_offset (blob, "/memory"); | |
163 | if (nodeoffset >= 0) { | |
164 | ret = fdt_setprop(blob, nodeoffset, "reg", memory_data, | |
165 | sizeof(memory_data)); | |
166 | if (ret < 0) | |
27269417 | 167 | printf("ft_blob_update(): cannot set /memory/reg " |
381e4e63 HS |
168 | "property err:%s\n", fdt_strerror(ret)); |
169 | } | |
170 | else { | |
171 | /* memory node is required in dts */ | |
172 | printf("ft_blob_update(): cannot find /memory node " | |
173 | "err:%s\n", fdt_strerror(nodeoffset)); | |
174 | } | |
175 | ||
176 | flash_data[2] = cpu_to_be32(bd->bi_flashstart); | |
177 | flash_data[3] = cpu_to_be32(bd->bi_flashsize); | |
178 | nodeoffset = fdt_path_offset (blob, "/localbus"); | |
179 | if (nodeoffset >= 0) { | |
180 | ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data, | |
181 | sizeof(flash_data)); | |
182 | if (ret < 0) | |
27269417 | 183 | printf("ft_blob_update(): cannot set /localbus/ranges " |
381e4e63 HS |
184 | "property err:%s\n", fdt_strerror(ret)); |
185 | } | |
186 | else { | |
187 | /* memory node is required in dts */ | |
188 | printf("ft_blob_update(): cannot find /localbus node " | |
189 | "err:%s\n", fdt_strerror(nodeoffset)); | |
190 | } | |
191 | /* BRG */ | |
192 | brg_data[0] = cpu_to_be32(bd->bi_busfreq); | |
82afabfe | 193 | nodeoffset = fdt_path_offset (blob, "/soc/cpm"); |
381e4e63 HS |
194 | if (nodeoffset >= 0) { |
195 | ret = fdt_setprop(blob, nodeoffset, "brg-frequency", brg_data, | |
196 | sizeof(brg_data)); | |
197 | if (ret < 0) | |
27269417 | 198 | printf("ft_blob_update(): cannot set /soc/cpm/brg-frequency " |
381e4e63 HS |
199 | "property err:%s\n", fdt_strerror(ret)); |
200 | } | |
201 | else { | |
202 | /* memory node is required in dts */ | |
82afabfe | 203 | printf("ft_blob_update(): cannot find /soc/cpm node " |
381e4e63 HS |
204 | "err:%s\n", fdt_strerror(nodeoffset)); |
205 | } | |
206 | /* MAC Adresse */ | |
82afabfe | 207 | nodeoffset = fdt_path_offset (blob, "/soc/cpm/ethernet"); |
381e4e63 HS |
208 | if (nodeoffset >= 0) { |
209 | ret = fdt_setprop(blob, nodeoffset, "mac-address", bd->bi_enetaddr, | |
210 | sizeof(uchar) * 6); | |
211 | if (ret < 0) | |
27269417 | 212 | printf("ft_blob_update(): cannot set /soc/cpm/scc/mac-address " |
381e4e63 HS |
213 | "property err:%s\n", fdt_strerror(ret)); |
214 | } | |
215 | else { | |
216 | /* memory node is required in dts */ | |
82afabfe | 217 | printf("ft_blob_update(): cannot find /soc/cpm/ethernet node " |
381e4e63 HS |
218 | "err:%s\n", fdt_strerror(nodeoffset)); |
219 | } | |
220 | } | |
221 | ||
222 | void ft_board_setup(void *blob, bd_t *bd) | |
223 | { | |
224 | ft_cpu_setup( blob, bd); | |
225 | ft_blob_update(blob, bd); | |
226 | } | |
227 | #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ |