]>
Commit | Line | Data |
---|---|---|
33b9079b KG |
1 | /* |
2 | * Copyright 2008 Freescale Semiconductor, Inc. | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or | |
5 | * modify it under the terms of the GNU General Public License | |
6 | * Version 2 as published by the Free Software Foundation. | |
7 | */ | |
8 | ||
9 | #include <common.h> | |
10 | #include <i2c.h> | |
11 | ||
12 | #include <asm/fsl_ddr_sdram.h> | |
dfb49108 | 13 | #include <asm/fsl_ddr_dimm_params.h> |
33b9079b KG |
14 | |
15 | static void | |
16 | get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) | |
17 | { | |
18 | i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); | |
19 | } | |
20 | ||
21 | unsigned int fsl_ddr_get_mem_data_rate(void) | |
22 | { | |
23 | return get_ddr_freq(0); | |
24 | } | |
25 | ||
26 | void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, | |
27 | unsigned int ctrl_num) | |
28 | { | |
29 | unsigned int i; | |
30 | ||
31 | if (ctrl_num) { | |
32 | printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); | |
33 | return; | |
34 | } | |
35 | ||
36 | for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { | |
37 | get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); | |
38 | } | |
39 | } | |
40 | ||
dfb49108 HW |
41 | void fsl_ddr_board_options(memctl_options_t *popts, |
42 | dimm_params_t *pdimm, | |
43 | unsigned int ctrl_num) | |
33b9079b KG |
44 | { |
45 | /* | |
46 | * Factors to consider for clock adjust: | |
47 | * - number of chips on bus | |
48 | * - position of slot | |
49 | * - DDR1 vs. DDR2? | |
50 | * - ??? | |
51 | * | |
52 | * This needs to be determined on a board-by-board basis. | |
53 | * 0110 3/4 cycle late | |
54 | * 0111 7/8 cycle late | |
55 | */ | |
56 | popts->clk_adjust = 7; | |
57 | ||
58 | /* | |
59 | * Factors to consider for CPO: | |
60 | * - frequency | |
61 | * - ddr1 vs. ddr2 | |
62 | */ | |
63 | popts->cpo_override = 10; | |
64 | ||
65 | /* | |
66 | * Factors to consider for write data delay: | |
67 | * - number of DIMMs | |
68 | * | |
69 | * 1 = 1/4 clock delay | |
70 | * 2 = 1/2 clock delay | |
71 | * 3 = 3/4 clock delay | |
72 | * 4 = 1 clock delay | |
73 | * 5 = 5/4 clock delay | |
74 | * 6 = 3/2 clock delay | |
75 | */ | |
76 | popts->write_data_delay = 3; | |
77 | ||
78 | /* | |
79 | * Factors to consider for half-strength driver enable: | |
80 | * - number of DIMMs installed | |
81 | */ | |
82 | popts->half_strength_driver_enable = 0; | |
83 | } |