]> git.ipfire.org Git - people/ms/u-boot.git/blame - board/sbc8560/sbc8560.c
* Code cleanup
[people/ms/u-boot.git] / board / sbc8560 / sbc8560.c
CommitLineData
8b07a110
WD
1/*
2 * (C) Copyright 2003,Motorola Inc.
3 * Xianghua Xiao, (X.Xiao@motorola.com)
4 *
5 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
6 *
7 * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
8 * Added support for Wind River SBC8560 board
9 *
10 * See file CREDITS for list of people who contributed to this
11 * project.
12 *
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation; either version 2 of
16 * the License, or (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26 * MA 02111-1307 USA
27 */
28
29
30extern long int spd_sdram (void);
31
32#include <common.h>
33#include <asm/processor.h>
34#include <asm/immap_85xx.h>
35#include <ioports.h>
36#include <spd.h>
37#include <miiphy.h>
38
39long int fixed_sdram (void);
40
41/*
42 * I/O Port configuration table
43 *
44 * if conf is 1, then that port pin will be configured at boot time
45 * according to the five values podr/pdir/ppar/psor/pdat for that entry
46 */
47
48const iop_conf_t iop_conf_tab[4][32] = {
49
50 /* Port A configuration */
51 { /* conf ppar psor pdir podr pdat */
52 /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
53 /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
54 /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
55 /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
56 /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
57 /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
58 /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
59 /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
60 /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
61 /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
62 /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
63 /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
64 /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
65 /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
66 /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
67 /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
68 /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
69 /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
70 /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
71 /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
72 /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
73 /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
74 /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
75 /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
76 /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
77 /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
78 /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
79 /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
80 /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
81 /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
82 /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
83 /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
84 },
85
86 /* Port B configuration */
87 { /* conf ppar psor pdir podr pdat */
88 /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
89 /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
90 /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
91 /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
92 /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
93 /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
94 /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
95 /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
96 /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
97 /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
98 /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
99 /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
100 /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
101 /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
102 /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
103 /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
104 /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
105 /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
106 /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */
107 /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
108 /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
109 /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
110 /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
111 /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
112 /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
113 /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
114 /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
115 /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
116 /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
117 /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
118 /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
119 /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
120 },
121
122 /* Port C */
123 { /* conf ppar psor pdir podr pdat */
124 /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
125 /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
126 /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
127 /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
128 /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
129 /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
130 /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
131 /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
132 /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
133 /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
134 /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
135 /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
136 /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
137 /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
138 /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
139 /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
140 /* PC15 */ { 1, 1, 0, 0, 0, 0 }, /* PC15 */
141 /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
142 /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
143 /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
144 /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
145 /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */
146 /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */
147 /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
148 /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
149 /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
150 /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
151 /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
152 /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
153 /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
154 /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
155 /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
156 },
157
158 /* Port D */
159 { /* conf ppar psor pdir podr pdat */
160 /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
161 /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
162 /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 RTS */
163 /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */
164 /* PD27 */ { 1, 1, 1, 1, 0, 0 }, /* SCC2 TxD */
165 /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 RTS */
166 /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
167 /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
168 /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
169 /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
170 /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
171 /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
172 /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
173 /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
174 /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
175 /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
176 /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
177 /* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */
178 /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
179 /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
180 /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
181 /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
182 /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
183 /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
184 /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
185 /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
186 /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
187 /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
188 /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
189 /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
190 /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
191 /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
192 }
193};
194
195int board_early_init_f (void)
196{
197#if defined(CONFIG_PCI)
198 volatile immap_t *immr = (immap_t *)CFG_IMMR;
199 volatile ccsr_pcix_t *pci = &immr->im_pcix;
200
201 pci->peer &= 0xfffffffdf; /* disable master abort */
202#endif
203 return 0;
204}
205
206void reset_phy (void)
207{
208#if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
209 volatile unsigned char *bcsr = (unsigned char *) CFG_BCSR;
210#endif
211 /* reset Giga bit Ethernet port if needed here */
212
213 /* reset the CPM FEC port */
214#if (CONFIG_ETHER_INDEX == 2)
215 bcsr[0] &= ~0x20;
216 udelay(2);
217 bcsr[0] |= 0x20;
218 udelay(1000);
219#elif (CONFIG_ETHER_INDEX == 3)
220 bcsr[0] &= ~0x10;
221 udelay(2);
222 bcsr[0] |= 0x10;
223 udelay(1000);
224#endif
225#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
226 miiphy_reset(0x0); /* reset PHY */
227 miiphy_write(0, PHY_MIPSCR, 0xf028); /* change PHY address to 0x02 */
228 miiphy_write(0x02, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
229#endif /* CONFIG_MII */
230}
231
232int checkboard (void)
233{
234 sys_info_t sysinfo;
235
236 get_sys_info (&sysinfo);
237
238 printf ("Board: Wind River SBC8560 Board\n");
239 printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
240 printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
241 printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
242 if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
243 || (CFG_LBC_LCRR & 0x0f) == 8) {
244 printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f));
245 } else {
246 printf("\tLBC: unknown\n");
247 }
248 printf("\tCPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
249 printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
250 return (0);
251}
252
253
254long int initdram (int board_type)
255{
256 long dram_size = 0;
257 extern long spd_sdram (void);
258 volatile immap_t *immap = (immap_t *)CFG_IMMR;
281e00a3 259#if 0
8b07a110
WD
260#if !defined(CONFIG_RAM_AS_FLASH)
261 volatile ccsr_lbc_t *lbc= &immap->im_lbc;
262 sys_info_t sysinfo;
263 uint temp_lbcdll = 0;
264#endif
281e00a3 265#endif /* 0 */
8b07a110
WD
266#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
267 volatile ccsr_gur_t *gur= &immap->im_gur;
268#endif
269#if defined(CONFIG_DDR_DLL)
270 uint temp_ddrdll = 0;
271
272 /* Work around to stabilize DDR DLL */
273 temp_ddrdll = gur->ddrdllcr;
274 gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
275 asm("sync;isync;msync");
276#endif
277
278#if defined(CONFIG_SPD_EEPROM)
279 dram_size = spd_sdram ();
280#else
281 dram_size = fixed_sdram ();
282#endif
283
281e00a3 284#if 0
8b07a110
WD
285#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
286 get_sys_info(&sysinfo);
287 /* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
288 if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
289 lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
290 } else {
291#if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */
292 lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */
293#endif
294 lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
295 udelay(200);
296 temp_lbcdll = gur->lbcdllcr;
297 gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
298 asm("sync;isync;msync");
299 }
300 lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
301 lbc->br2 = CFG_BR2_PRELIM;
302 lbc->lbcr = CFG_LBC_LBCR;
303 lbc->lsdmr = CFG_LBC_LSDMR_1;
304 asm("sync");
305 (unsigned int) * (ulong *)0 = 0x000000ff;
306 lbc->lsdmr = CFG_LBC_LSDMR_2;
307 asm("sync");
308 (unsigned int) * (ulong *)0 = 0x000000ff;
309 lbc->lsdmr = CFG_LBC_LSDMR_3;
310 asm("sync");
311 (unsigned int) * (ulong *)0 = 0x000000ff;
312 lbc->lsdmr = CFG_LBC_LSDMR_4;
313 asm("sync");
314 (unsigned int) * (ulong *)0 = 0x000000ff;
315 lbc->lsdmr = CFG_LBC_LSDMR_5;
316 asm("sync");
317 lbc->lsrt = CFG_LBC_LSRT;
318 asm("sync");
319 lbc->mrtpr = CFG_LBC_MRTPR;
320 asm("sync");
321#endif
322#endif
323
324#if defined(CONFIG_DDR_ECC)
325 {
326 /* Initialize all of memory for ECC, then
327 * enable errors */
328 uint *p = 0;
329 uint i = 0;
330 volatile immap_t *immap = (immap_t *)CFG_IMMR;
331 volatile ccsr_ddr_t *ddr= &immap->im_ddr;
332 dma_init();
333 for (*p = 0; p < (uint *)(8 * 1024); p++) {
334 if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
335 *p = (unsigned int)0xdeadbeef;
336 if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
337 }
338
339 /* 8K */
340 dma_xfer((uint *)0x2000,0x2000,(uint *)0);
341 /* 16K */
342 dma_xfer((uint *)0x4000,0x4000,(uint *)0);
343 /* 32K */
344 dma_xfer((uint *)0x8000,0x8000,(uint *)0);
345 /* 64K */
346 dma_xfer((uint *)0x10000,0x10000,(uint *)0);
347 /* 128k */
348 dma_xfer((uint *)0x20000,0x20000,(uint *)0);
349 /* 256k */
350 dma_xfer((uint *)0x40000,0x40000,(uint *)0);
351 /* 512k */
352 dma_xfer((uint *)0x80000,0x80000,(uint *)0);
353 /* 1M */
354 dma_xfer((uint *)0x100000,0x100000,(uint *)0);
355 /* 2M */
356 dma_xfer((uint *)0x200000,0x200000,(uint *)0);
357 /* 4M */
358 dma_xfer((uint *)0x400000,0x400000,(uint *)0);
359
360 for (i = 1; i < dram_size / 0x800000; i++) {
361 dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
362 }
363
364 /* Enable errors for ECC */
365 ddr->err_disable = 0x00000000;
366 asm("sync;isync;msync");
367 }
368#endif
369
370 return dram_size;
371}
372
373
374#if defined(CFG_DRAM_TEST)
375int testdram (void)
376{
377 uint *pstart = (uint *) CFG_MEMTEST_START;
378 uint *pend = (uint *) CFG_MEMTEST_END;
379 uint *p;
380
381 printf("SDRAM test phase 1:\n");
382 for (p = pstart; p < pend; p++)
383 *p = 0xaaaaaaaa;
384
385 for (p = pstart; p < pend; p++) {
386 if (*p != 0xaaaaaaaa) {
387 printf ("SDRAM test fails at: %08x\n", (uint) p);
388 return 1;
389 }
390 }
391
392 printf("SDRAM test phase 2:\n");
393 for (p = pstart; p < pend; p++)
394 *p = 0x55555555;
395
396 for (p = pstart; p < pend; p++) {
397 if (*p != 0x55555555) {
398 printf ("SDRAM test fails at: %08x\n", (uint) p);
399 return 1;
400 }
401 }
402
403 printf("SDRAM test passed.\n");
404 return 0;
405}
406#endif
407
408#if !defined(CONFIG_SPD_EEPROM)
409/*************************************************************************
410 * fixed sdram init -- doesn't use serial presence detect.
411 ************************************************************************/
412long int fixed_sdram (void)
413{
414
415#define CFG_DDR_CONTROL 0xc2000000
416
417 #ifndef CFG_RAMBOOT
418 volatile immap_t *immap = (immap_t *)CFG_IMMR;
419 volatile ccsr_ddr_t *ddr= &immap->im_ddr;
420
421 ddr->cs0_bnds = 0x00000007;
422 ddr->cs1_bnds = 0x0010001f;
423 ddr->cs2_bnds = 0x00000000;
424 ddr->cs3_bnds = 0x00000000;
425 ddr->cs0_config = 0x80000102;
426 ddr->cs1_config = 0x80000102;
427 ddr->cs2_config = 0x00000000;
428 ddr->cs3_config = 0x00000000;
429 ddr->timing_cfg_1 = 0x37334321;
430 ddr->timing_cfg_2 = 0x00000800;
431 ddr->sdram_cfg = 0x42000000;
432 ddr->sdram_mode = 0x00000022;
433 ddr->sdram_interval = 0x05200100;
434 ddr->err_sbe = 0x00ff0000;
435 #if defined (CONFIG_DDR_ECC)
436 ddr->err_disable = 0x0000000D;
437 #endif
438 asm("sync;isync;msync");
439 udelay(500);
440 #if defined (CONFIG_DDR_ECC)
441 /* Enable ECC checking */
442 ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
443 #else
444 ddr->sdram_cfg = CFG_DDR_CONTROL;
445 #endif
446 asm("sync; isync; msync");
447 udelay(500);
448 #endif
449 return CFG_SDRAM_SIZE * 1024 * 1024;
450}
451#endif /* !defined(CONFIG_SPD_EEPROM) */