]>
Commit | Line | Data |
---|---|---|
65fb6a67 PP |
1 | /* |
2 | * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> | |
3 | * | |
4 | * (C) Copyright 2007 Gary Jennejohn garyj@denx.de | |
5 | * Modified to use the routines in cpu/arm720t/lpc2292/flash.c. | |
6 | * Heavily modified to support the SMN42 board from Siemens | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License as | |
10 | * published by the Free Software Foundation; either version 2 of | |
11 | * the License, or (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
21 | * MA 02111-1307 USA | |
22 | */ | |
23 | ||
24 | #include <common.h> | |
25 | #include <asm/byteorder.h> | |
26 | #include <asm/arch/hardware.h> | |
27 | ||
6d0f6bcf JCPV |
28 | static unsigned long flash_addr_table[CONFIG_SYS_MAX_FLASH_BANKS] = CONFIG_SYS_FLASH_BANKS_LIST; |
29 | flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; | |
65fb6a67 PP |
30 | |
31 | extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong); | |
32 | extern int lpc2292_flash_erase(flash_info_t *, int, int); | |
33 | extern int lpc2292_write_buff (flash_info_t *, uchar *, ulong, ulong); | |
34 | static unsigned long ext_flash_init(void); | |
35 | static int ext_flash_erase(flash_info_t *, int, int); | |
36 | static int ext_write_buff(flash_info_t *, uchar *, ulong, ulong); | |
37 | ||
38 | /*----------------------------------------------------------------------- | |
39 | */ | |
40 | ||
41 | ulong flash_init (void) | |
42 | { | |
43 | int j, k; | |
44 | ulong size = 0; | |
45 | ulong flashbase = 0; | |
46 | ||
47 | flash_info[0].flash_id = PHILIPS_LPC2292; | |
48 | flash_info[0].size = 0x003E000; /* 256 - 8 KB */ | |
49 | flash_info[0].sector_count = 17; | |
50 | memset (flash_info[0].protect, 0, 17); | |
51 | flashbase = 0x00000000; | |
52 | for (j = 0, k = 0; j < 8; j++, k++) { | |
53 | flash_info[0].start[k] = flashbase; | |
54 | flashbase += 0x00002000; | |
55 | } | |
56 | for (j = 0; j < 2; j++, k++) { | |
57 | flash_info[0].start[k] = flashbase; | |
58 | flashbase += 0x00010000; | |
59 | } | |
60 | for (j = 0; j < 7; j++, k++) { | |
61 | flash_info[0].start[k] = flashbase; | |
62 | flashbase += 0x00002000; | |
63 | } | |
64 | size += flash_info[0].size; | |
65 | ||
66 | /* Protect monitor and environment sectors */ | |
67 | flash_protect (FLAG_PROTECT_SET, | |
68 | 0x0, | |
69 | 0x0 + monitor_flash_len - 1, | |
70 | &flash_info[0]); | |
71 | ||
72 | flash_protect (FLAG_PROTECT_SET, | |
0e8d1586 JCPV |
73 | CONFIG_ENV_ADDR, |
74 | CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, | |
65fb6a67 PP |
75 | &flash_info[0]); |
76 | ||
77 | size += ext_flash_init(); | |
78 | ||
79 | return size; | |
80 | } | |
81 | ||
82 | /*----------------------------------------------------------------------- | |
83 | */ | |
84 | void flash_print_info (flash_info_t * info) | |
85 | { | |
86 | int i; | |
87 | int erased = 0; | |
88 | unsigned long j; | |
89 | unsigned long count; | |
90 | unsigned char *p; | |
91 | ||
92 | switch (info->flash_id & FLASH_VENDMASK) { | |
93 | case (PHILIPS_LPC2292 & FLASH_VENDMASK): | |
94 | printf("Philips: "); | |
95 | break; | |
96 | case FLASH_MAN_AMD: | |
97 | printf("AMD: "); | |
98 | break; | |
99 | default: | |
100 | printf ("Unknown Vendor "); | |
101 | break; | |
102 | } | |
103 | ||
104 | switch (info->flash_id & FLASH_TYPEMASK) { | |
105 | case (PHILIPS_LPC2292 & FLASH_TYPEMASK): | |
106 | printf("LPC2292 internal flash\n"); | |
107 | break; | |
108 | case FLASH_S29GL128N: | |
109 | printf ("S29GL128N (128 Mbit, uniform sector size)\n"); | |
110 | break; | |
111 | default: | |
112 | printf("Unknown Chip Type\n"); | |
113 | return; | |
114 | } | |
115 | ||
116 | printf (" Size: %ld KB in %d Sectors\n", | |
117 | info->size >> 10, info->sector_count); | |
118 | ||
119 | printf (" Sector Start Addresses:"); | |
120 | for (i = 0; i < info->sector_count; i++) { | |
121 | if ((i % 5) == 0) { | |
122 | printf ("\n "); | |
123 | } | |
124 | if (i < (info->sector_count - 1)) { | |
125 | count = info->start[i+1] - info->start[i]; | |
126 | } | |
127 | else { | |
128 | count = info->start[0] + info->size - info->start[i]; | |
129 | } | |
130 | p = (unsigned char*)(info->start[i]); | |
131 | erased = 1; | |
132 | for (j = 0; j < count; j++) { | |
133 | if (*p != 0xFF) { | |
134 | erased = 0; | |
135 | break; | |
136 | } | |
137 | p++; | |
138 | } | |
139 | printf (" %08lX%s%s", info->start[i], info->protect[i] ? " RO" : " ", | |
140 | erased ? " E" : " "); | |
141 | } | |
142 | printf ("\n"); | |
143 | } | |
144 | ||
145 | int flash_erase (flash_info_t * info, int s_first, int s_last) | |
146 | { | |
147 | switch (info->flash_id & FLASH_TYPEMASK) { | |
148 | case (PHILIPS_LPC2292 & FLASH_TYPEMASK): | |
149 | return lpc2292_flash_erase(info, s_first, s_last); | |
150 | case FLASH_S29GL128N: | |
151 | return ext_flash_erase(info, s_first, s_last); | |
152 | default: | |
153 | return ERR_PROTECTED; | |
154 | } | |
155 | return ERR_PROTECTED; | |
156 | } | |
157 | ||
158 | int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) | |
159 | { | |
160 | switch (info->flash_id & FLASH_TYPEMASK) { | |
161 | case (PHILIPS_LPC2292 & FLASH_TYPEMASK): | |
162 | return lpc2292_write_buff(info, src, addr, cnt); | |
163 | case FLASH_S29GL128N: | |
164 | return ext_write_buff(info, src, addr, cnt); | |
165 | default: | |
166 | return ERR_PROG_ERROR; | |
167 | } | |
168 | return ERR_PROG_ERROR; | |
169 | } | |
170 | ||
171 | /*-------------------------------------------------------------------------- | |
172 | * From here on is code for the external S29GL128N taken from cam5200_flash.c | |
173 | */ | |
174 | ||
6d0f6bcf | 175 | #define CONFIG_SYS_FLASH_WORD_SIZE unsigned short |
65fb6a67 PP |
176 | |
177 | static int wait_for_DQ7_32(flash_info_t * info, int sect) | |
178 | { | |
179 | ulong start, now, last; | |
6d0f6bcf JCPV |
180 | volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = |
181 | (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); | |
65fb6a67 PP |
182 | |
183 | start = get_timer(0); | |
184 | last = start; | |
6d0f6bcf JCPV |
185 | while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != |
186 | (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) { | |
187 | if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { | |
65fb6a67 PP |
188 | printf("Timeout\n"); |
189 | return -1; | |
190 | } | |
191 | /* show that we're waiting */ | |
192 | if ((now - last) > 1000) { /* every second */ | |
193 | putc('.'); | |
194 | last = now; | |
195 | } | |
196 | } | |
197 | return 0; | |
198 | } | |
199 | ||
200 | int ext_flash_erase(flash_info_t * info, int s_first, int s_last) | |
201 | { | |
6d0f6bcf JCPV |
202 | volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); |
203 | volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2; | |
65fb6a67 PP |
204 | int flag, prot, sect, l_sect, ret; |
205 | ||
206 | ret = 0; | |
207 | if ((s_first < 0) || (s_first > s_last)) { | |
208 | if (info->flash_id == FLASH_UNKNOWN) | |
209 | printf("- missing\n"); | |
210 | else | |
211 | printf("- no sectors to erase\n"); | |
212 | return 1; | |
213 | } | |
214 | ||
215 | if (info->flash_id == FLASH_UNKNOWN) { | |
216 | printf("Can't erase unknown flash type - aborted\n"); | |
217 | return 1; | |
218 | } | |
219 | ||
220 | prot = 0; | |
221 | for (sect = s_first; sect <= s_last; ++sect) { | |
222 | if (info->protect[sect]) | |
223 | prot++; | |
224 | } | |
225 | ||
226 | if (prot) | |
227 | printf("- Warning: %d protected sectors will not be erased!", prot); | |
228 | ||
229 | printf("\n"); | |
230 | ||
231 | l_sect = -1; | |
232 | ||
233 | /* Disable interrupts which might cause a timeout here */ | |
234 | flag = disable_interrupts(); | |
235 | ||
236 | /* Start erase on unprotected sectors */ | |
237 | for (sect = s_first; sect <= s_last; sect++) { | |
238 | if (info->protect[sect] == 0) { /* not protected */ | |
6d0f6bcf | 239 | addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); |
65fb6a67 | 240 | |
6d0f6bcf JCPV |
241 | addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; |
242 | addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; | |
243 | addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080; | |
244 | addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; | |
245 | addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; | |
246 | addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ | |
65fb6a67 PP |
247 | |
248 | l_sect = sect; | |
249 | /* | |
250 | * Wait for each sector to complete, it's more | |
251 | * reliable. According to AMD Spec, you must | |
252 | * issue all erase commands within a specified | |
253 | * timeout. This has been seen to fail, especially | |
254 | * if printf()s are included (for debug)!! | |
255 | */ | |
256 | ret = wait_for_DQ7_32(info, sect); | |
257 | if (ret) { | |
258 | ret = ERR_PROTECTED; | |
259 | break; | |
260 | } | |
261 | } | |
262 | } | |
263 | ||
264 | /* re-enable interrupts if necessary */ | |
265 | if (flag) | |
266 | enable_interrupts(); | |
267 | ||
268 | /* wait at least 80us - let's wait 1 ms */ | |
269 | udelay(1000); | |
270 | ||
271 | /* reset to read mode */ | |
6d0f6bcf JCPV |
272 | addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0]; |
273 | addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ | |
65fb6a67 PP |
274 | |
275 | if (ret) | |
276 | printf(" error\n"); | |
277 | else | |
278 | printf(" done\n"); | |
279 | return ret; | |
280 | } | |
281 | ||
282 | static ulong flash_get_size(vu_long * addr, flash_info_t * info) | |
283 | { | |
284 | short i; | |
6d0f6bcf | 285 | CONFIG_SYS_FLASH_WORD_SIZE value; |
65fb6a67 | 286 | ulong base = (ulong) addr; |
6d0f6bcf | 287 | volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr; |
65fb6a67 PP |
288 | |
289 | /* Write auto select command: read Manufacturer ID */ | |
6d0f6bcf JCPV |
290 | addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; |
291 | addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; | |
292 | addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090; | |
65fb6a67 PP |
293 | udelay(1000); |
294 | ||
295 | value = addr2[0]; | |
296 | ||
297 | switch (value) { | |
6d0f6bcf | 298 | case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT: |
65fb6a67 PP |
299 | info->flash_id = FLASH_MAN_AMD; |
300 | break; | |
301 | default: | |
302 | info->flash_id = FLASH_UNKNOWN; | |
303 | info->sector_count = 0; | |
304 | info->size = 0; | |
305 | return (0); /* no or unknown flash */ | |
306 | } | |
307 | ||
308 | value = addr2[1]; /* device ID */ | |
309 | ||
310 | switch (value) { | |
6d0f6bcf | 311 | case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_MIRROR: |
65fb6a67 PP |
312 | value = addr2[14]; |
313 | switch(value) { | |
6d0f6bcf | 314 | case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_GL128N_2: |
65fb6a67 | 315 | value = addr2[15]; |
6d0f6bcf | 316 | if (value != (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_GL128N_3) { |
65fb6a67 PP |
317 | info->flash_id = FLASH_UNKNOWN; |
318 | } else { | |
319 | info->flash_id += FLASH_S29GL128N; | |
320 | info->sector_count = 128; | |
321 | info->size = 0x01000000; | |
322 | } | |
323 | break; | |
324 | default: | |
325 | info->flash_id = FLASH_UNKNOWN; | |
326 | return(0); | |
327 | } | |
328 | break; | |
329 | ||
330 | default: | |
331 | info->flash_id = FLASH_UNKNOWN; | |
332 | return (0); /* => no or unknown flash */ | |
333 | } | |
334 | ||
335 | /* set up sector start address table */ | |
336 | for (i = 0; i < info->sector_count; i++) | |
337 | info->start[i] = base + (i * 0x00020000); | |
338 | ||
339 | /* check for protected sectors */ | |
340 | for (i = 0; i < info->sector_count; i++) { | |
341 | /* read sector protection at sector address, (A7 .. A0) = 0x02 */ | |
342 | /* D0 = 1 if protected */ | |
6d0f6bcf | 343 | addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]); |
65fb6a67 PP |
344 | |
345 | info->protect[i] = addr2[2] & 1; | |
346 | } | |
347 | ||
348 | /* issue bank reset to return to read mode */ | |
6d0f6bcf | 349 | addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; |
65fb6a67 PP |
350 | |
351 | return (info->size); | |
352 | } | |
353 | ||
354 | static unsigned long ext_flash_init(void) | |
355 | { | |
356 | unsigned long total_b = 0; | |
6d0f6bcf | 357 | unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS]; |
65fb6a67 PP |
358 | int i; |
359 | ||
360 | /* Init: no FLASHes known */ | |
6d0f6bcf | 361 | for (i = 1; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { |
65fb6a67 PP |
362 | flash_info[i].flash_id = FLASH_UNKNOWN; |
363 | flash_info[i].sector_count = -1; | |
364 | flash_info[i].size = 0; | |
365 | ||
366 | /* call flash_get_size() to initialize sector address */ | |
367 | size_b[i] = flash_get_size((vu_long *) flash_addr_table[i], | |
368 | &flash_info[i]); | |
369 | ||
370 | flash_info[i].size = size_b[i]; | |
371 | ||
372 | if (flash_info[i].flash_id == FLASH_UNKNOWN) { | |
373 | printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", | |
374 | i+1, size_b[i], size_b[i] << 20); | |
375 | flash_info[i].sector_count = -1; | |
376 | flash_info[i].size = 0; | |
377 | } | |
378 | ||
379 | total_b += flash_info[i].size; | |
380 | } | |
381 | ||
382 | return total_b; | |
383 | } | |
384 | ||
385 | static int write_word(flash_info_t * info, ulong dest, ushort data) | |
386 | { | |
6d0f6bcf JCPV |
387 | volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); |
388 | volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest; | |
389 | volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) &data; | |
65fb6a67 PP |
390 | ulong start; |
391 | int flag; | |
392 | ||
393 | /* Check if Flash is (sufficiently) erased */ | |
394 | if ((*dest2 & *data2) != *data2) { | |
395 | return (2); | |
396 | } | |
397 | ||
398 | /* Disable interrupts which might cause a timeout here */ | |
399 | flag = disable_interrupts(); | |
400 | ||
6d0f6bcf JCPV |
401 | addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; |
402 | addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; | |
403 | addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0; | |
65fb6a67 PP |
404 | *dest2 = *data2; |
405 | ||
406 | /* re-enable interrupts if necessary */ | |
407 | if (flag) | |
408 | enable_interrupts(); | |
409 | ||
410 | /* data polling for D7 */ | |
411 | start = get_timer(0); | |
6d0f6bcf JCPV |
412 | while ((*dest2 & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != |
413 | (*data2 & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) { | |
65fb6a67 | 414 | |
6d0f6bcf | 415 | if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { |
65fb6a67 PP |
416 | printf("WRITE_TOUT\n"); |
417 | return (1); | |
418 | } | |
419 | } | |
420 | return (0); | |
421 | } | |
422 | ||
423 | /*----------------------------------------------------------------------- | |
424 | * This is taken from the original flash.c for the LPC2292 SODIMM board | |
425 | * and modified to suit. | |
426 | */ | |
427 | ||
428 | int ext_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) | |
429 | { | |
430 | ushort tmp; | |
431 | ulong i; | |
432 | uchar* src_org; | |
433 | uchar* dst_org; | |
434 | ulong cnt_org = cnt; | |
435 | int ret = ERR_OK; | |
436 | ||
437 | src_org = src; | |
438 | dst_org = (uchar*)addr; | |
439 | ||
440 | if (addr & 1) { /* if odd address */ | |
441 | tmp = *((uchar*)(addr - 1)); /* little endian */ | |
442 | tmp |= (*src << 8); | |
443 | if (write_word(info, addr - 1, tmp)) | |
444 | return ERR_PROG_ERROR; | |
445 | addr += 1; | |
446 | cnt -= 1; | |
447 | src++; | |
448 | } | |
449 | while (cnt > 1) { | |
450 | tmp = ((*(src+1)) << 8) + (*src); /* little endian */ | |
451 | if (write_word(info, addr, tmp)) | |
452 | return ERR_PROG_ERROR; | |
453 | addr += 2; | |
454 | src += 2; | |
455 | cnt -= 2; | |
456 | } | |
457 | if (cnt > 0) { | |
458 | tmp = (*((uchar*)(addr + 1))) << 8; | |
459 | tmp |= *src; | |
460 | if (write_word(info, addr, tmp)) | |
461 | return ERR_PROG_ERROR; | |
462 | } | |
463 | ||
464 | for (i = 0; i < cnt_org; i++) { | |
465 | if (*dst_org != *src_org) { | |
466 | printf("Write failed. Byte %lX differs\n", i); | |
467 | ret = ERR_PROG_ERROR; | |
468 | break; | |
469 | } | |
470 | dst_org++; | |
471 | src_org++; | |
472 | } | |
473 | ||
474 | return ret; | |
475 | } |