]>
Commit | Line | Data |
---|---|---|
f904cdbb | 1 | /* |
75c57a35 | 2 | * (C) Copyright 2004-2011 |
f904cdbb DB |
3 | * Texas Instruments, <www.ti.com> |
4 | * | |
5 | * Author : | |
6 | * Sunil Kumar <sunilsaini05@gmail.com> | |
7 | * Shashi Ranjan <shashiranjanmca05@gmail.com> | |
8 | * | |
9 | * Derived from Beagle Board and 3430 SDP code by | |
10 | * Richard Woodruff <r-woodruff2@ti.com> | |
11 | * Syed Mohammed Khasim <khasim@ti.com> | |
12 | * | |
13 | * | |
1a459660 | 14 | * SPDX-License-Identifier: GPL-2.0+ |
f904cdbb DB |
15 | */ |
16 | #include <common.h> | |
b3f4ca11 SG |
17 | #include <dm.h> |
18 | #include <ns16550.h> | |
2d8d190c | 19 | #ifdef CONFIG_LED_STATUS |
70d8c944 JK |
20 | #include <status_led.h> |
21 | #endif | |
2c155130 | 22 | #include <twl4030.h> |
75c57a35 | 23 | #include <linux/mtd/nand.h> |
f904cdbb | 24 | #include <asm/io.h> |
0cd31144 | 25 | #include <asm/arch/mmc_host_def.h> |
f904cdbb | 26 | #include <asm/arch/mux.h> |
75c57a35 | 27 | #include <asm/arch/mem.h> |
f904cdbb | 28 | #include <asm/arch/sys_proto.h> |
84c3b631 | 29 | #include <asm/gpio.h> |
f904cdbb | 30 | #include <asm/mach-types.h> |
c642b151 | 31 | #include <asm/omap_musb.h> |
1221ce45 | 32 | #include <linux/errno.h> |
c642b151 IY |
33 | #include <linux/usb/ch9.h> |
34 | #include <linux/usb/gadget.h> | |
35 | #include <linux/usb/musb.h> | |
f904cdbb | 36 | #include "beagle.h" |
f835ea71 | 37 | #include <command.h> |
f904cdbb | 38 | |
43b62393 G |
39 | #ifdef CONFIG_USB_EHCI |
40 | #include <usb.h> | |
41 | #include <asm/ehci-omap.h> | |
42 | #endif | |
43 | ||
ca5f80ae KK |
44 | #define TWL4030_I2C_BUS 0 |
45 | #define EXPANSION_EEPROM_I2C_BUS 1 | |
46 | #define EXPANSION_EEPROM_I2C_ADDRESS 0x50 | |
47 | ||
48 | #define TINCANTOOLS_ZIPPY 0x01000100 | |
49 | #define TINCANTOOLS_ZIPPY2 0x02000100 | |
50 | #define TINCANTOOLS_TRAINER 0x04000100 | |
51 | #define TINCANTOOLS_SHOWDOG 0x03000100 | |
52 | #define KBADC_BEAGLEFPGA 0x01000600 | |
ee8485fd KK |
53 | #define LW_BEAGLETOUCH 0x01000700 |
54 | #define BRAINMUX_LCDOG 0x01000800 | |
55 | #define BRAINMUX_LCDOGTOUCH 0x02000800 | |
56 | #define BBTOYS_WIFI 0x01000B00 | |
57 | #define BBTOYS_VGA 0x02000B00 | |
58 | #define BBTOYS_LCD 0x03000B00 | |
6cce5504 | 59 | #define BCT_BRETTL3 0x01000F00 |
ef88e609 | 60 | #define BCT_BRETTL4 0x02000F00 |
8a1f2dc0 | 61 | #define LSR_COM6L_ADPT 0x01001300 |
ca5f80ae KK |
62 | #define BEAGLE_NO_EEPROM 0xffffffff |
63 | ||
29565326 JR |
64 | DECLARE_GLOBAL_DATA_PTR; |
65 | ||
ca5f80ae KK |
66 | static struct { |
67 | unsigned int device_vendor; | |
68 | unsigned char revision; | |
69 | unsigned char content; | |
70 | char fab_revision[8]; | |
71 | char env_var[16]; | |
72 | char env_setting[64]; | |
73 | } expansion_config; | |
74 | ||
b3f4ca11 | 75 | static const struct ns16550_platdata beagle_serial = { |
2f6ed3b8 AF |
76 | .base = OMAP34XX_UART3, |
77 | .reg_shift = 2, | |
17fa0326 HS |
78 | .clock = V_NS16550_CLK, |
79 | .fcr = UART_FCR_DEFVAL, | |
b3f4ca11 SG |
80 | }; |
81 | ||
82 | U_BOOT_DEVICE(beagle_uart) = { | |
c7b9686d | 83 | "ns16550_serial", |
b3f4ca11 SG |
84 | &beagle_serial |
85 | }; | |
86 | ||
58911517 | 87 | /* |
f904cdbb DB |
88 | * Routine: board_init |
89 | * Description: Early hardware init. | |
58911517 | 90 | */ |
f904cdbb DB |
91 | int board_init(void) |
92 | { | |
f904cdbb DB |
93 | gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ |
94 | /* board id for Linux */ | |
95 | gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE; | |
96 | /* boot param addr */ | |
97 | gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); | |
98 | ||
2d8d190c UM |
99 | #if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE) |
100 | status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON); | |
70d8c944 JK |
101 | #endif |
102 | ||
f904cdbb DB |
103 | return 0; |
104 | } | |
105 | ||
58911517 | 106 | /* |
06b95bd5 SS |
107 | * Routine: get_board_revision |
108 | * Description: Detect if we are running on a Beagle revision Ax/Bx, | |
8ce4e5f9 | 109 | * C1/2/3, C4, xM Ax/Bx or xM Cx. This can be done by reading |
06b95bd5 SS |
110 | * the level of GPIO173, GPIO172 and GPIO171. This should |
111 | * result in | |
112 | * GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx | |
113 | * GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3 | |
114 | * GPIO173, GPIO172, GPIO171: 1 0 1 => C4 | |
8ce4e5f9 TR |
115 | * GPIO173, GPIO172, GPIO171: 0 1 0 => xM Cx |
116 | * GPIO173, GPIO172, GPIO171: 0 0 0 => xM Ax/Bx | |
58911517 | 117 | */ |
fff1a572 | 118 | static int get_board_revision(void) |
f956fd03 | 119 | { |
b3f4ca11 | 120 | static int revision = -1; |
f956fd03 | 121 | |
b3f4ca11 SG |
122 | if (revision == -1) { |
123 | if (!gpio_request(171, "rev0") && | |
124 | !gpio_request(172, "rev1") && | |
125 | !gpio_request(173, "rev2")) { | |
126 | gpio_direction_input(171); | |
127 | gpio_direction_input(172); | |
128 | gpio_direction_input(173); | |
718763c4 | 129 | |
b3f4ca11 SG |
130 | revision = gpio_get_value(173) << 2 | |
131 | gpio_get_value(172) << 1 | | |
132 | gpio_get_value(171); | |
133 | } else { | |
134 | printf("Error: unable to acquire board revision GPIOs\n"); | |
135 | } | |
718763c4 | 136 | } |
f956fd03 | 137 | |
06b95bd5 | 138 | return revision; |
f956fd03 DB |
139 | } |
140 | ||
75c57a35 TR |
141 | #ifdef CONFIG_SPL_BUILD |
142 | /* | |
143 | * Routine: get_board_mem_timings | |
144 | * Description: If we use SPL then there is no x-loader nor config header | |
145 | * so we have to setup the DDR timings ourself on both banks. | |
146 | */ | |
8c4445d2 | 147 | void get_board_mem_timings(struct board_sdrc_timings *timings) |
75c57a35 TR |
148 | { |
149 | int pop_mfr, pop_id; | |
150 | ||
151 | /* | |
152 | * We need to identify what PoP memory is on the board so that | |
153 | * we know what timings to use. If we can't identify it then | |
154 | * we know it's an xM. To map the ID values please see nand_ids.c | |
155 | */ | |
156 | identify_nand_chip(&pop_mfr, &pop_id); | |
157 | ||
8c4445d2 | 158 | timings->mr = MICRON_V_MR_165; |
75c57a35 TR |
159 | switch (get_board_revision()) { |
160 | case REVISION_C4: | |
161 | if (pop_mfr == NAND_MFR_STMICRO && pop_id == 0xba) { | |
162 | /* 512MB DDR */ | |
8c4445d2 PB |
163 | timings->mcfg = NUMONYX_V_MCFG_165(512 << 20); |
164 | timings->ctrla = NUMONYX_V_ACTIMA_165; | |
165 | timings->ctrlb = NUMONYX_V_ACTIMB_165; | |
166 | timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; | |
75c57a35 | 167 | break; |
223b8aa4 | 168 | } else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xba) { |
169 | /* Beagleboard Rev C4, 512MB Nand/256MB DDR*/ | |
8c4445d2 PB |
170 | timings->mcfg = MICRON_V_MCFG_165(128 << 20); |
171 | timings->ctrla = MICRON_V_ACTIMA_165; | |
172 | timings->ctrlb = MICRON_V_ACTIMB_165; | |
173 | timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; | |
223b8aa4 | 174 | break; |
75c57a35 TR |
175 | } else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xbc) { |
176 | /* Beagleboard Rev C5, 256MB DDR */ | |
8c4445d2 PB |
177 | timings->mcfg = MICRON_V_MCFG_200(256 << 20); |
178 | timings->ctrla = MICRON_V_ACTIMA_200; | |
179 | timings->ctrlb = MICRON_V_ACTIMB_200; | |
180 | timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; | |
75c57a35 TR |
181 | break; |
182 | } | |
af4d896f | 183 | case REVISION_XM_AB: |
75c57a35 TR |
184 | case REVISION_XM_C: |
185 | if (pop_mfr == 0) { | |
186 | /* 256MB DDR */ | |
8c4445d2 PB |
187 | timings->mcfg = MICRON_V_MCFG_200(256 << 20); |
188 | timings->ctrla = MICRON_V_ACTIMA_200; | |
189 | timings->ctrlb = MICRON_V_ACTIMB_200; | |
190 | timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; | |
75c57a35 TR |
191 | } else { |
192 | /* 512MB DDR */ | |
8c4445d2 PB |
193 | timings->mcfg = NUMONYX_V_MCFG_165(512 << 20); |
194 | timings->ctrla = NUMONYX_V_ACTIMA_165; | |
195 | timings->ctrlb = NUMONYX_V_ACTIMB_165; | |
196 | timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; | |
75c57a35 TR |
197 | } |
198 | break; | |
199 | default: | |
200 | /* Assume 128MB and Micron/165MHz timings to be safe */ | |
8c4445d2 PB |
201 | timings->mcfg = MICRON_V_MCFG_165(128 << 20); |
202 | timings->ctrla = MICRON_V_ACTIMA_165; | |
203 | timings->ctrlb = MICRON_V_ACTIMB_165; | |
204 | timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; | |
75c57a35 TR |
205 | } |
206 | } | |
207 | #endif | |
208 | ||
ca5f80ae KK |
209 | /* |
210 | * Routine: get_expansion_id | |
211 | * Description: This function checks for expansion board by checking I2C | |
212 | * bus 1 for the availability of an AT24C01B serial EEPROM. | |
213 | * returns the device_vendor field from the EEPROM | |
214 | */ | |
fff1a572 | 215 | static unsigned int get_expansion_id(void) |
ca5f80ae KK |
216 | { |
217 | i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS); | |
218 | ||
219 | /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */ | |
220 | if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) { | |
221 | i2c_set_bus_num(TWL4030_I2C_BUS); | |
222 | return BEAGLE_NO_EEPROM; | |
223 | } | |
224 | ||
225 | /* read configuration data */ | |
226 | i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config, | |
227 | sizeof(expansion_config)); | |
228 | ||
ff229ecf | 229 | /* retry reading configuration data with 16bit addressing */ |
230 | if ((expansion_config.device_vendor == 0xFFFFFF00) || | |
231 | (expansion_config.device_vendor == 0xFFFFFFFF)) { | |
232 | printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n"); | |
233 | i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config, | |
234 | sizeof(expansion_config)); | |
235 | } | |
236 | ||
ca5f80ae KK |
237 | i2c_set_bus_num(TWL4030_I2C_BUS); |
238 | ||
239 | return expansion_config.device_vendor; | |
240 | } | |
241 | ||
2c30c184 | 242 | #ifdef CONFIG_VIDEO_OMAP3 |
3f16ab91 JK |
243 | /* |
244 | * Configure DSS to display background color on DVID | |
245 | * Configure VENC to display color bar on S-Video | |
246 | */ | |
fff1a572 | 247 | static void beagle_display_init(void) |
3f16ab91 JK |
248 | { |
249 | omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH); | |
250 | switch (get_board_revision()) { | |
251 | case REVISION_AXBX: | |
252 | case REVISION_CX: | |
253 | case REVISION_C4: | |
254 | omap3_dss_panel_config(&dvid_cfg); | |
255 | break; | |
af4d896f | 256 | case REVISION_XM_AB: |
3f16ab91 JK |
257 | case REVISION_XM_C: |
258 | default: | |
259 | omap3_dss_panel_config(&dvid_cfg_xm); | |
260 | break; | |
261 | } | |
262 | } | |
263 | ||
4258aa62 PM |
264 | /* |
265 | * Enable DVI power | |
266 | */ | |
3fbc6931 AG |
267 | static void beagle_dvi_pup(void) |
268 | { | |
4258aa62 PM |
269 | uchar val; |
270 | ||
271 | switch (get_board_revision()) { | |
272 | case REVISION_AXBX: | |
273 | case REVISION_CX: | |
274 | case REVISION_C4: | |
b3f4ca11 | 275 | gpio_request(170, "dvi"); |
4258aa62 PM |
276 | gpio_direction_output(170, 0); |
277 | gpio_set_value(170, 1); | |
278 | break; | |
af4d896f | 279 | case REVISION_XM_AB: |
4258aa62 PM |
280 | case REVISION_XM_C: |
281 | default: | |
282 | #define GPIODATADIR1 (TWL4030_BASEADD_GPIO+3) | |
283 | #define GPIODATAOUT1 (TWL4030_BASEADD_GPIO+6) | |
284 | ||
285 | i2c_read(TWL4030_CHIP_GPIO, GPIODATADIR1, 1, &val, 1); | |
286 | val |= 4; | |
287 | i2c_write(TWL4030_CHIP_GPIO, GPIODATADIR1, 1, &val, 1); | |
288 | ||
289 | i2c_read(TWL4030_CHIP_GPIO, GPIODATAOUT1, 1, &val, 1); | |
290 | val |= 4; | |
291 | i2c_write(TWL4030_CHIP_GPIO, GPIODATAOUT1, 1, &val, 1); | |
292 | break; | |
293 | } | |
294 | } | |
2c30c184 | 295 | #endif |
4258aa62 | 296 | |
c642b151 IY |
297 | #ifdef CONFIG_USB_MUSB_OMAP2PLUS |
298 | static struct musb_hdrc_config musb_config = { | |
299 | .multipoint = 1, | |
300 | .dyn_fifo = 1, | |
301 | .num_eps = 16, | |
302 | .ram_bits = 12, | |
303 | }; | |
304 | ||
305 | static struct omap_musb_board_data musb_board_data = { | |
306 | .interface_type = MUSB_INTERFACE_ULPI, | |
307 | }; | |
308 | ||
309 | static struct musb_hdrc_platform_data musb_plat = { | |
95de1e2f | 310 | #if defined(CONFIG_USB_MUSB_HOST) |
c642b151 | 311 | .mode = MUSB_HOST, |
95de1e2f | 312 | #elif defined(CONFIG_USB_MUSB_GADGET) |
c642b151 IY |
313 | .mode = MUSB_PERIPHERAL, |
314 | #else | |
95de1e2f | 315 | #error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET" |
c642b151 IY |
316 | #endif |
317 | .config = &musb_config, | |
318 | .power = 100, | |
319 | .platform_ops = &omap2430_ops, | |
320 | .board_data = &musb_board_data, | |
321 | }; | |
322 | #endif | |
323 | ||
58911517 | 324 | /* |
f904cdbb DB |
325 | * Routine: misc_init_r |
326 | * Description: Configure board specific parts | |
58911517 | 327 | */ |
f904cdbb DB |
328 | int misc_init_r(void) |
329 | { | |
97a099ea DB |
330 | struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; |
331 | struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE; | |
f14a522a | 332 | struct control_prog_io *prog_io_base = (struct control_prog_io *)OMAP34XX_CTRL_BASE; |
548a64d8 | 333 | bool generate_fake_mac = false; |
04e2a133 | 334 | u32 value; |
d4e53f06 SK |
335 | |
336 | /* Enable i2c2 pullup resisters */ | |
04e2a133 AK |
337 | value = readl(&prog_io_base->io1); |
338 | value &= ~(PRG_I2C2_PULLUPRESX); | |
339 | writel(value, &prog_io_base->io1); | |
f904cdbb | 340 | |
06b95bd5 SS |
341 | switch (get_board_revision()) { |
342 | case REVISION_AXBX: | |
343 | printf("Beagle Rev Ax/Bx\n"); | |
344 | setenv("beaglerev", "AxBx"); | |
06b95bd5 SS |
345 | break; |
346 | case REVISION_CX: | |
347 | printf("Beagle Rev C1/C2/C3\n"); | |
348 | setenv("beaglerev", "Cx"); | |
06b95bd5 SS |
349 | MUX_BEAGLE_C(); |
350 | break; | |
351 | case REVISION_C4: | |
352 | printf("Beagle Rev C4\n"); | |
08cbba2a | 353 | setenv("beaglerev", "C4"); |
06b95bd5 SS |
354 | MUX_BEAGLE_C(); |
355 | /* Set VAUX2 to 1.8V for EHCI PHY */ | |
08cbba2a SS |
356 | twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, |
357 | TWL4030_PM_RECEIVER_VAUX2_VSEL_18, | |
358 | TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, | |
359 | TWL4030_PM_RECEIVER_DEV_GRP_P1); | |
360 | break; | |
af4d896f NM |
361 | case REVISION_XM_AB: |
362 | printf("Beagle xM Rev A/B\n"); | |
363 | setenv("beaglerev", "xMAB"); | |
08cbba2a SS |
364 | MUX_BEAGLE_XM(); |
365 | /* Set VAUX2 to 1.8V for EHCI PHY */ | |
1ffcb346 KK |
366 | twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, |
367 | TWL4030_PM_RECEIVER_VAUX2_VSEL_18, | |
368 | TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, | |
369 | TWL4030_PM_RECEIVER_DEV_GRP_P1); | |
548a64d8 | 370 | generate_fake_mac = true; |
1ffcb346 KK |
371 | break; |
372 | case REVISION_XM_C: | |
373 | printf("Beagle xM Rev C\n"); | |
374 | setenv("beaglerev", "xMC"); | |
375 | MUX_BEAGLE_XM(); | |
376 | /* Set VAUX2 to 1.8V for EHCI PHY */ | |
06b95bd5 SS |
377 | twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, |
378 | TWL4030_PM_RECEIVER_VAUX2_VSEL_18, | |
379 | TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, | |
380 | TWL4030_PM_RECEIVER_DEV_GRP_P1); | |
548a64d8 | 381 | generate_fake_mac = true; |
06b95bd5 SS |
382 | break; |
383 | default: | |
384 | printf("Beagle unknown 0x%02x\n", get_board_revision()); | |
f6e593bb KK |
385 | MUX_BEAGLE_XM(); |
386 | /* Set VAUX2 to 1.8V for EHCI PHY */ | |
387 | twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, | |
388 | TWL4030_PM_RECEIVER_VAUX2_VSEL_18, | |
389 | TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, | |
390 | TWL4030_PM_RECEIVER_DEV_GRP_P1); | |
548a64d8 | 391 | generate_fake_mac = true; |
06b95bd5 SS |
392 | } |
393 | ||
ca5f80ae KK |
394 | switch (get_expansion_id()) { |
395 | case TINCANTOOLS_ZIPPY: | |
396 | printf("Recognized Tincantools Zippy board (rev %d %s)\n", | |
397 | expansion_config.revision, | |
398 | expansion_config.fab_revision); | |
399 | MUX_TINCANTOOLS_ZIPPY(); | |
400 | setenv("buddy", "zippy"); | |
401 | break; | |
402 | case TINCANTOOLS_ZIPPY2: | |
403 | printf("Recognized Tincantools Zippy2 board (rev %d %s)\n", | |
404 | expansion_config.revision, | |
405 | expansion_config.fab_revision); | |
406 | MUX_TINCANTOOLS_ZIPPY(); | |
407 | setenv("buddy", "zippy2"); | |
408 | break; | |
409 | case TINCANTOOLS_TRAINER: | |
410 | printf("Recognized Tincantools Trainer board (rev %d %s)\n", | |
411 | expansion_config.revision, | |
412 | expansion_config.fab_revision); | |
413 | MUX_TINCANTOOLS_ZIPPY(); | |
414 | MUX_TINCANTOOLS_TRAINER(); | |
415 | setenv("buddy", "trainer"); | |
416 | break; | |
417 | case TINCANTOOLS_SHOWDOG: | |
418 | printf("Recognized Tincantools Showdow board (rev %d %s)\n", | |
419 | expansion_config.revision, | |
420 | expansion_config.fab_revision); | |
421 | /* Place holder for DSS2 definition for showdog lcd */ | |
422 | setenv("defaultdisplay", "showdoglcd"); | |
423 | setenv("buddy", "showdog"); | |
424 | break; | |
425 | case KBADC_BEAGLEFPGA: | |
426 | printf("Recognized KBADC Beagle FPGA board\n"); | |
427 | MUX_KBADC_BEAGLEFPGA(); | |
428 | setenv("buddy", "beaglefpga"); | |
429 | break; | |
ee8485fd KK |
430 | case LW_BEAGLETOUCH: |
431 | printf("Recognized Liquidware BeagleTouch board\n"); | |
432 | setenv("buddy", "beagletouch"); | |
433 | break; | |
434 | case BRAINMUX_LCDOG: | |
435 | printf("Recognized Brainmux LCDog board\n"); | |
436 | setenv("buddy", "lcdog"); | |
437 | break; | |
438 | case BRAINMUX_LCDOGTOUCH: | |
439 | printf("Recognized Brainmux LCDog Touch board\n"); | |
440 | setenv("buddy", "lcdogtouch"); | |
441 | break; | |
442 | case BBTOYS_WIFI: | |
443 | printf("Recognized BeagleBoardToys WiFi board\n"); | |
444 | MUX_BBTOYS_WIFI() | |
445 | setenv("buddy", "bbtoys-wifi"); | |
446 | break;; | |
447 | case BBTOYS_VGA: | |
448 | printf("Recognized BeagleBoardToys VGA board\n"); | |
449 | break;; | |
450 | case BBTOYS_LCD: | |
451 | printf("Recognized BeagleBoardToys LCD board\n"); | |
452 | break;; | |
6cce5504 | 453 | case BCT_BRETTL3: |
ef88e609 PM |
454 | printf("Recognized bct electronic GmbH brettl3 board\n"); |
455 | break; | |
456 | case BCT_BRETTL4: | |
457 | printf("Recognized bct electronic GmbH brettl4 board\n"); | |
458 | break; | |
8a1f2dc0 | 459 | case LSR_COM6L_ADPT: |
460 | printf("Recognized LSR COM6L Adapter Board\n"); | |
461 | MUX_BBTOYS_WIFI() | |
462 | setenv("buddy", "lsr-com6l-adpt"); | |
463 | break; | |
ca5f80ae KK |
464 | case BEAGLE_NO_EEPROM: |
465 | printf("No EEPROM on expansion board\n"); | |
466 | setenv("buddy", "none"); | |
467 | break; | |
468 | default: | |
469 | printf("Unrecognized expansion board: %x\n", | |
470 | expansion_config.device_vendor); | |
471 | setenv("buddy", "unknown"); | |
472 | } | |
473 | ||
474 | if (expansion_config.content == 1) | |
475 | setenv(expansion_config.env_var, expansion_config.env_setting); | |
476 | ||
2c155130 | 477 | twl4030_power_init(); |
38a77c3a | 478 | switch (get_board_revision()) { |
af4d896f | 479 | case REVISION_XM_AB: |
38a77c3a CS |
480 | twl4030_led_init(TWL4030_LED_LEDEN_LEDBON); |
481 | break; | |
482 | default: | |
483 | twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); | |
484 | break; | |
485 | } | |
f904cdbb | 486 | |
52d82e40 | 487 | /* Set GPIO states before they are made outputs */ |
f904cdbb DB |
488 | writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1, |
489 | &gpio6_base->setdataout); | |
490 | writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | | |
491 | GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout); | |
492 | ||
52d82e40 BF |
493 | /* Configure GPIOs to output */ |
494 | writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); | |
495 | writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | | |
496 | GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe); | |
497 | ||
679f82c3 | 498 | omap_die_id_display(); |
4258aa62 | 499 | |
2c30c184 | 500 | #ifdef CONFIG_VIDEO_OMAP3 |
4258aa62 | 501 | beagle_dvi_pup(); |
3f16ab91 JK |
502 | beagle_display_init(); |
503 | omap3_dss_enable(); | |
2c30c184 | 504 | #endif |
e6a6a704 | 505 | |
c642b151 IY |
506 | #ifdef CONFIG_USB_MUSB_OMAP2PLUS |
507 | musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE); | |
508 | #endif | |
509 | ||
07815eb9 PK |
510 | if (generate_fake_mac) |
511 | omap_die_id_usbethaddr(); | |
548a64d8 | 512 | |
f904cdbb DB |
513 | return 0; |
514 | } | |
515 | ||
58911517 | 516 | /* |
f904cdbb DB |
517 | * Routine: set_muxconf_regs |
518 | * Description: Setting up the configuration Mux registers specific to the | |
519 | * hardware. Many pins need to be moved from protect to primary | |
520 | * mode. | |
58911517 | 521 | */ |
f904cdbb DB |
522 | void set_muxconf_regs(void) |
523 | { | |
524 | MUX_BEAGLE(); | |
525 | } | |
0cd31144 | 526 | |
d5abcf94 | 527 | #if defined(CONFIG_GENERIC_MMC) |
0cd31144 SS |
528 | int board_mmc_init(bd_t *bis) |
529 | { | |
e3913f56 | 530 | return omap_mmc_init(0, 0, 0, -1, -1); |
0cd31144 SS |
531 | } |
532 | #endif | |
d90859a6 | 533 | |
aac5450e PK |
534 | #if defined(CONFIG_GENERIC_MMC) |
535 | void board_mmc_power_init(void) | |
536 | { | |
537 | twl4030_power_mmc_init(0); | |
538 | } | |
539 | #endif | |
540 | ||
7ac2fe2d | 541 | #if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD) |
d90859a6 AH |
542 | /* Call usb_stop() before starting the kernel */ |
543 | void show_boot_progress(int val) | |
544 | { | |
578ac1e9 | 545 | if (val == BOOTSTAGE_ID_RUN_OS) |
d90859a6 AH |
546 | usb_stop(); |
547 | } | |
43b62393 G |
548 | |
549 | static struct omap_usbhs_board_data usbhs_bdata = { | |
550 | .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, | |
551 | .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, | |
552 | .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED | |
553 | }; | |
554 | ||
127efc4f TK |
555 | int ehci_hcd_init(int index, enum usb_init_type init, |
556 | struct ehci_hccr **hccr, struct ehci_hcor **hcor) | |
43b62393 | 557 | { |
16297cfb | 558 | return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); |
43b62393 G |
559 | } |
560 | ||
676ae068 | 561 | int ehci_hcd_stop(int index) |
43b62393 G |
562 | { |
563 | return omap_ehci_hcd_stop(); | |
564 | } | |
565 | ||
d90859a6 | 566 | #endif /* CONFIG_USB_EHCI */ |
c642b151 | 567 | |
95de1e2f | 568 | #if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET) |
c642b151 IY |
569 | int board_eth_init(bd_t *bis) |
570 | { | |
571 | return usb_eth_initialize(bis); | |
572 | } | |
573 | #endif |