]>
Commit | Line | Data |
---|---|---|
5b0d03b3 FE |
1 | How to use U-Boot on MX6Q/DL Udoo boards |
2 | ---------------------------------------- | |
3 | ||
4 | - Build U-Boot for MX6Q/DL Udoo boards: | |
5 | ||
6 | $ make mrproper | |
7 | $ make udoo_defconfig | |
8 | $ make | |
9 | ||
10 | This will generate the SPL image called SPL and the u-boot.img. | |
11 | ||
12 | - Flash the SPL image into the SD card: | |
13 | ||
14 | sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync | |
15 | ||
16 | - Flash the u-boot.img image into the SD card: | |
17 | ||
18 | sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync | |
19 | ||
20 | - Insert the SD card in the board, power it up and U-Boot messages should | |
21 | come up. |