[people/ms/u-boot.git] / board / v38b / ethaddr.c

/*
 * (C) Copyright 2006
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <mpc5xxx.h>

/* For the V38B board the pin is GPIO_PSC_6 */
#define GPIO_PIN	GPIO_PSC6_0

#define NO_ERROR	0
#define ERR_NO_NUMBER	1
#define ERR_BAD_NUMBER	2

static int is_high(void);
static int check_device(void);
static void io_out(int value);
static void io_input(void);
static void io_output(void);
static void init_gpio(void);
static void read_byte(unsigned char *data);
static void write_byte(unsigned char command);

void read_2501_memory(unsigned char *psernum, unsigned char *perr);
void board_get_enetaddr(uchar *enetaddr);


static int is_high()
{
	return (*((vu_long *) MPC5XXX_WU_GPIO_DATA_I) & GPIO_PIN);
}

static void io_out(int value)
{
	if (value)
		*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) |= GPIO_PIN;
	else
		*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) &= ~GPIO_PIN;
}

static void io_input()
{
	*((vu_long *) MPC5XXX_WU_GPIO_DIR) &= ~GPIO_PIN;
	udelay(3);	/* allow input to settle */
}

static void io_output()
{
	*((vu_long *) MPC5XXX_WU_GPIO_DIR) |= GPIO_PIN;
}

static void init_gpio()
{
	*((vu_long *) MPC5XXX_WU_GPIO_ENABLE) |= GPIO_PIN;	/* Enable appropriate pin */
}

void read_2501_memory(unsigned char *psernum, unsigned char *perr)
{
#define NBYTES 28
	unsigned char crcval, i;
	unsigned char buf[NBYTES];

	*perr = 0;
	crcval = 0;

	for (i = 0; i < NBYTES; i++)
		buf[i] = 0;

	if (!check_device())
		*perr = ERR_NO_NUMBER;
	else {
		*perr = NO_ERROR;
		write_byte(0xCC);		/* skip ROM (0xCC) */
		write_byte(0xF0);		/* Read memory command 0xF0 */
		write_byte(0x00);		/* Address TA1=0, TA2=0 */
		write_byte(0x00);
		read_byte(&crcval);		/* Read CRC of address and command */

		for (i = 0; i < NBYTES; i++)
			read_byte(&buf[i]);
	}
	if (strncmp((const char *) &buf[11], "MAREL IEEE 802.3", 16)) {
		*perr = ERR_BAD_NUMBER;
		psernum[0] = 0x00;
		psernum[1] = 0xE0;
		psernum[2] = 0xEE;
		psernum[3] = 0xFF;
		psernum[4] = 0xFF;
		psernum[5] = 0xFF;
	} else {
		psernum[0] = 0x00;
		psernum[1] = 0xE0;
		psernum[2] = 0xEE;
		psernum[3] = buf[7];
		psernum[4] = buf[6];
		psernum[5] = buf[5];
	}
}

static int check_device()
{
	int found;

	io_output();
	io_out(0);
	udelay(500);  /* must be at least 480 us low pulse */

	io_input();
	udelay(60);

	found = (is_high() == 0) ? 1 : 0;
	udelay(500);  /* must be at least 480 us low pulse */

	return found;
}

static void write_byte(unsigned char command)
{
	char i;

	for (i = 0; i < 8; i++) {
		/* 1 us to 15 us low pulse starts bit slot */
		/* Start with high pulse for 3 us */
		io_input();
		udelay(3);

		io_out(0);
		io_output();
		udelay(3);

		if (command & 0x01) {
			/* 60 us high for 1-bit */
			io_input();
			udelay(60);
		} else
			/* 60 us low for 0-bit */
			udelay(60);
		/*  Leave pin as input */
		io_input();

		command = command >> 1;
	}
}

static void read_byte(unsigned char *data)
{
	unsigned char i, rdat = 0;

	for (i = 0; i < 8; i++) {
		/* read one bit from one-wire device */

		/* 1 - 15 us low starts bit slot */
		io_out(0);
		io_output();
		udelay(0);

		/* allow line to be pulled high */
		io_input();

		/* delay 10 us */
		udelay(10);

		/* now sample input status */
		if (is_high())
			rdat = (rdat >> 1) | 0x80;
		else
			rdat = rdat >> 1;

		udelay(60);	/* at least 60 us */
	}
	/* copy the return value */
	*data = rdat;
}

void board_get_enetaddr(uchar *enetaddr)
{
	unsigned char sn[6], err = NO_ERROR;

	init_gpio();

	read_2501_memory(sn, &err);

	if (err == NO_ERROR) {
		sprintf((char *)enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
				sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]);
		printf("MAC address: %s\n", enetaddr);
		setenv("ethaddr", (char *)enetaddr);
	} else {
		sprintf((char *)enetaddr, "00:01:02:03:04:05");
		printf("Error reading MAC address.\n");
		printf("Setting default to %s\n", enetaddr);
		setenv("ethaddr", (char *)enetaddr);
	}
}
Commit	Line	Data
4707fb50	1	/*
4707fb50 BS	2	* (C) Copyright 2006
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	#include <common.h>
	25	#include <mpc5xxx.h>
	26
ffa150bc BS	27	/* For the V38B board the pin is GPIO_PSC_6 */
ffa150bc BS	28	#define GPIO_PIN GPIO_PSC6_0
4707fb50 BS	29
	30	#define NO_ERROR 0
	31	#define ERR_NO_NUMBER 1
	32	#define ERR_BAD_NUMBER 2
	33
4707fb50 BS	34	static int is_high(void);
	35	static int check_device(void);
	36	static void io_out(int value);
	37	static void io_input(void);
	38	static void io_output(void);
	39	static void init_gpio(void);
	40	static void read_byte(unsigned char *data);
	41	static void write_byte(unsigned char command);
	42
	43	void read_2501_memory(unsigned char psernum, unsigned char perr);
	44	void board_get_enetaddr(uchar *enetaddr);
	45
ffa150bc	46
4707fb50 BS	47	static int is_high()
4707fb50 BS	48	{
ffa150bc	49	return (((vu_long ) MPC5XXX_WU_GPIO_DATA_I) & GPIO_PIN);
4707fb50 BS	50	}
	51
	52	static void io_out(int value)
	53	{
	54	if (value)
ffa150bc	55	((vu_long ) MPC5XXX_WU_GPIO_DATA_O) \|= GPIO_PIN;
4707fb50	56	else
ffa150bc	57	((vu_long ) MPC5XXX_WU_GPIO_DATA_O) &= ~GPIO_PIN;
4707fb50 BS	58	}
	59
	60	static void io_input()
	61	{
ffa150bc	62	((vu_long ) MPC5XXX_WU_GPIO_DIR) &= ~GPIO_PIN;
4707fb50 BS	63	udelay(3); /* allow input to settle */
	64	}
	65
	66	static void io_output()
	67	{
ffa150bc	68	((vu_long ) MPC5XXX_WU_GPIO_DIR) \|= GPIO_PIN;
4707fb50 BS	69	}
	70
	71	static void init_gpio()
	72	{
ffa150bc	73	((vu_long ) MPC5XXX_WU_GPIO_ENABLE) \|= GPIO_PIN; /* Enable appropriate pin */
4707fb50 BS	74	}
	75
	76	void read_2501_memory(unsigned char psernum, unsigned char perr)
	77	{
	78	#define NBYTES 28
	79	unsigned char crcval, i;
	80	unsigned char buf[NBYTES];
	81
	82	*perr = 0;
	83	crcval = 0;
	84
ffa150bc BS	85	for (i = 0; i < NBYTES; i++)
ffa150bc BS	86	buf[i] = 0;
4707fb50 BS	87
	88	if (!check_device())
	89	*perr = ERR_NO_NUMBER;
	90	else {
	91	*perr = NO_ERROR;
	92	write_byte(0xCC); /* skip ROM (0xCC) */
	93	write_byte(0xF0); /* Read memory command 0xF0 */
	94	write_byte(0x00); /* Address TA1=0, TA2=0 */
	95	write_byte(0x00);
	96	read_byte(&crcval); /* Read CRC of address and command */
	97
ffa150bc BS	98	for (i = 0; i < NBYTES; i++)
ffa150bc BS	99	read_byte(&buf[i]);
4707fb50	100	}
ffa150bc	101	if (strncmp((const char *) &buf[11], "MAREL IEEE 802.3", 16)) {
4707fb50 BS	102	*perr = ERR_BAD_NUMBER;
	103	psernum[0] = 0x00;
	104	psernum[1] = 0xE0;
	105	psernum[2] = 0xEE;
	106	psernum[3] = 0xFF;
	107	psernum[4] = 0xFF;
	108	psernum[5] = 0xFF;
ffa150bc	109	} else {
4707fb50 BS	110	psernum[0] = 0x00;
	111	psernum[1] = 0xE0;
	112	psernum[2] = 0xEE;
	113	psernum[3] = buf[7];
	114	psernum[4] = buf[6];
	115	psernum[5] = buf[5];
	116	}
	117	}
	118
	119	static int check_device()
	120	{
	121	int found;
	122
	123	io_output();
	124	io_out(0);
	125	udelay(500); /* must be at least 480 us low pulse */
	126
	127	io_input();
	128	udelay(60);
	129
	130	found = (is_high() == 0) ? 1 : 0;
	131	udelay(500); /* must be at least 480 us low pulse */
	132
	133	return found;
	134	}
	135
	136	static void write_byte(unsigned char command)
	137	{
	138	char i;
	139
ffa150bc	140	for (i = 0; i < 8; i++) {
4707fb50 BS	141	/* 1 us to 15 us low pulse starts bit slot */
	142	/* Start with high pulse for 3 us */
	143	io_input();
4707fb50 BS	144	udelay(3);
	145
	146	io_out(0);
	147	io_output();
4707fb50 BS	148	udelay(3);
	149
	150	if (command & 0x01) {
	151	/* 60 us high for 1-bit */
	152	io_input();
	153	udelay(60);
ffa150bc	154	} else
4707fb50 BS	155	/* 60 us low for 0-bit */
4707fb50 BS	156	udelay(60);
4707fb50 BS	157	/* Leave pin as input */
	158	io_input();
	159
	160	command = command >> 1;
	161	}
	162	}
	163
ffa150bc	164	static void read_byte(unsigned char *data)
4707fb50 BS	165	{
	166	unsigned char i, rdat = 0;
	167
ffa150bc	168	for (i = 0; i < 8; i++) {
4707fb50 BS	169	/* read one bit from one-wire device */
	170
	171	/* 1 - 15 us low starts bit slot */
	172	io_out(0);
	173	io_output();
	174	udelay(0);
	175
	176	/* allow line to be pulled high */
	177	io_input();
	178
	179	/* delay 10 us */
	180	udelay(10);
	181
	182	/* now sample input status */
	183	if (is_high())
	184	rdat = (rdat >> 1) \| 0x80;
	185	else
	186	rdat = rdat >> 1;
fcfed4f2	187
4707fb50 BS	188	udelay(60); /* at least 60 us */
	189	}
	190	/* copy the return value */
	191	*data = rdat;
	192	}
	193
	194	void board_get_enetaddr(uchar *enetaddr)
	195	{
ffa150bc	196	unsigned char sn[6], err = NO_ERROR;
4707fb50 BS	197
	198	init_gpio();
	199
	200	read_2501_memory(sn, &err);
	201
	202	if (err == NO_ERROR) {
ffa150bc	203	sprintf((char *)enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
4707fb50 BS	204	sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]);
4707fb50 BS	205	printf("MAC address: %s\n", enetaddr);
ffa150bc BS	206	setenv("ethaddr", (char *)enetaddr);
	207	} else {
	208	sprintf((char *)enetaddr, "00:01:02:03:04:05");
4707fb50 BS	209	printf("Error reading MAC address.\n");
4707fb50 BS	210	printf("Setting default to %s\n", enetaddr);
ffa150bc	211	setenv("ethaddr", (char *)enetaddr);
4707fb50 BS	212	}
4707fb50 BS	213	}