]> git.ipfire.org Git - people/ms/u-boot.git/blame - board/w7o/vpd.h
Makefile: move all Power Architecture boards into boards.cfg
[people/ms/u-boot.git] / board / w7o / vpd.h
CommitLineData
c609719b
WD
1/*
2 * (C) Copyright 2001
3 * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#ifndef _VPD_H_
25#define _VPD_H_
26
27/*
28 * Main Flash Configuration.
29 */
30typedef struct flashCfg_s {
31 unsigned short mfg; /* Manufacture ID */
32 unsigned short dev; /* Device ID */
33 unsigned char devWidth; /* Device Width */
34 unsigned char numDevs; /* Number of devices */
35 unsigned char numCols; /* Number of columns */
36 unsigned char colWidth; /* Width of a column */
37 unsigned char weDataWidth; /* Write/Erase Data Width */
38} flashCfg_t;
39
40/*
41 * Vital Product Data - VPD
42 */
43#define MAX_PROD_ID 15
44#define MAX_ETH_ADDRS 10
45typedef unsigned char EthAddr[6];
46typedef struct vpd {
47 unsigned char _devAddr; /* Device address during read */
48 char productId[MAX_PROD_ID]; /* Product ID */
49 char revisionId; /* Revision ID as a char */
50 unsigned long serialNum; /* Serial number */
51 unsigned char manuID; /* Manufact ID - byte int */
52 unsigned long configOpt; /* Config Option - bit field */
53 unsigned long sysClk; /* System clock in Hertz */
54 unsigned long serClk; /* Ext. clock in Hertz */
55 flashCfg_t flashCfg; /* Flash configuration */
56 unsigned long numPOTS; /* Number of POTS lines */
57 unsigned long numDS1; /* Number of DS1 circuits */
58 EthAddr ethAddrs[MAX_ETH_ADDRS]; /* Ethernet MAC, 1st = craft */
59} VPD;
60
61
62#define VPD_MAX_EEPROM_SIZE 512 /* Max size VPD EEPROM */
63#define SDRAM_SPD_DATA_SIZE 128 /* Size SPD in VPD EEPROM */
64
65/*
66 * PIDs - Packet Identifiers
67 */
68#define VPD_PID_GI 0x0 /* Guaranted Illegal */
69#define VPD_PID_PID 0x1 /* Product Identifier */
70#define VPD_PID_REV 0x2 /* Product Revision */
71#define VPD_PID_SN 0x3 /* Serial Number */
72#define VPD_PID_MANID 0x4 /* Manufacture ID */
73#define VPD_PID_PCO 0x5 /* Product configuration */
74#define VPD_PID_SYSCLK 0x6 /* System Clock */
75#define VPD_PID_SERCLK 0x7 /* Ser. Clk. Speed in Hertz */
76#define VPD_PID_CRC 0x8 /* VPD CRC */
77#define VPD_PID_FLASH 0x9 /* Flash Configuration */
78#define VPD_PID_ETHADDR 0xA /* Ethernet Address(es) */
79#define VPD_PID_GAL 0xB /* Galileo Switch Config */
80#define VPD_PID_POTS 0xC /* Number of POTS Lines */
81#define VPD_PID_DS1 0xD /* Number of DS1s */
82#define VPD_PID_TERM 0xFF /* Termination packet */
83
84/*
85 * VPD - Eyecatcher/Magic
86 */
87#define VPD_EYECATCHER "W7O"
88#define VPD_EYE_SIZE 3
89typedef struct vpd_header {
90 unsigned char eyecatcher[VPD_EYE_SIZE]; /* eyecatcher - "W7O" */
91 unsigned short size __attribute__((packed)); /* size of EEPROM */
92} vpd_header_t;
93
94
95#define VPD_DATA_SIZE (VPD_MAX_EEPROM_SIZE - SDRAM_SPD_DATA_SIZE - \
8bde7f77 96 sizeof(vpd_header_t))
c609719b
WD
97typedef struct vpd_s {
98 vpd_header_t header;
99 unsigned char packets[VPD_DATA_SIZE];
100} vpd_t;
101
102typedef struct vpd_packet {
103 unsigned char identifier;
104 unsigned char size;
105 unsigned char data[1];
106} vpd_packet_t;
107
108/*
109 * VPD configOpt bit mask
110 */
111#define VPD_HAS_BBRAM 0x1 /* Battery backed SRAM */
112#define VPD_HAS_RTC 0x2 /* Battery backed RTC */
113#define VPD_HAS_EXT_SER_CLK 0x4 /* External serial clock */
114#define VPD_HAS_SER_TRANS_1 0x8 /* COM1 transceiver */
115#define VPD_HAS_SER_TRANS_2 0x10 /* COM2 transceiver */
116#define VPD_HAS_CRAFT_PHY 0x20 /* CRAFT Ethernet */
117#define VPD_HAS_DTT_1 0x40 /* I2C Digital therm. #1 */
118#define VPD_HAS_DTT_2 0x80 /* I2C Digital therm. #2 */
119#define VPD_HAS_1000_UP_LASER 0x100 /* GMM - 1000Mbit Uplink */
120#define VPD_HAS_70KM_UP_LASER 0x200 /* CMM - 70KM Uplink laser */
121#define VPD_HAS_2_UPLINKS 0x400 /* CMM - 2 uplink lasers */
122#define VPD_HAS_FPGA 0x800 /* Has 1 or more FPGAs */
123#define VPD_HAS_DFA 0x1000 /* CLM - Has 2 Fiber Inter. */
124#define VPD_HAS_GAL_SWITCH 0x2000 /* GMM - Has a Gal switch */
125#define VPD_HAS_POTS_LINES 0x4000 /* GMM - Has POTS lines */
126#define VPD_HAS_DS1_CHANNELS 0x8000 /* GMM - Has DS1 channels */
127#define VPD_HAS_CABLE_RETURN 0x10000 /* GBM/GBR - Cable ret. path */
128
129#define VPD_EEPROM_SIZE (256 - SDRAM_SPD_DATA_SIZE) /* Size EEPROM */
130
131extern int vpd_get_data(unsigned char dev_addr, VPD *vpd);
132extern void vpd_print(VPD *vpdInfo);
133
134#endif /* _VPD_H_ */