]>
Commit | Line | Data |
---|---|---|
72a8cf8d SG |
1 | menu "Command line interface" |
2 | ||
302a6487 SG |
3 | config CMDLINE |
4 | bool "Support U-Boot commands" | |
5 | default y | |
6 | help | |
7 | Enable U-Boot's command-line functions. This provides a means | |
8 | to enter commands into U-Boot for a wide variety of purposes. It | |
9 | also allows scripts (containing commands) to be executed. | |
10 | Various commands and command categorys can be indivdually enabled. | |
11 | Depending on the number of commands enabled, this can add | |
12 | substantially to the size of U-Boot. | |
13 | ||
72a8cf8d SG |
14 | config HUSH_PARSER |
15 | bool "Use hush shell" | |
302a6487 | 16 | depends on CMDLINE |
72a8cf8d SG |
17 | help |
18 | This option enables the "hush" shell (from Busybox) as command line | |
19 | interpreter, thus enabling powerful command line syntax like | |
20 | if...then...else...fi conditionals or `&&' and '||' | |
21 | constructs ("shell scripts"). | |
22 | ||
23 | If disabled, you get the old, much simpler behaviour with a somewhat | |
24 | smaller memory footprint. | |
25 | ||
72a8cf8d SG |
26 | config SYS_PROMPT |
27 | string "Shell prompt" | |
28 | default "=> " | |
29 | help | |
30 | This string is displayed in the command line to the left of the | |
31 | cursor. | |
32 | ||
33 | menu "Autoboot options" | |
34 | ||
41598c82 MY |
35 | config AUTOBOOT |
36 | bool "Autoboot" | |
37 | default y | |
38 | help | |
39 | This enables the autoboot. See doc/README.autoboot for detail. | |
40 | ||
72a8cf8d SG |
41 | config AUTOBOOT_KEYED |
42 | bool "Stop autobooting via specific input key / string" | |
43 | default n | |
44 | help | |
45 | This option enables stopping (aborting) of the automatic | |
46 | boot feature only by issuing a specific input key or | |
47 | string. If not enabled, any input key will abort the | |
48 | U-Boot automatic booting process and bring the device | |
49 | to the U-Boot prompt for user input. | |
50 | ||
51 | config AUTOBOOT_PROMPT | |
52 | string "Autoboot stop prompt" | |
53 | depends on AUTOBOOT_KEYED | |
54 | default "Autoboot in %d seconds\\n" | |
55 | help | |
56 | This string is displayed before the boot delay selected by | |
57 | CONFIG_BOOTDELAY starts. If it is not defined there is no | |
58 | output indicating that autoboot is in progress. | |
59 | ||
60 | Note that this define is used as the (only) argument to a | |
61 | printf() call, so it may contain '%' format specifications, | |
62 | provided that it also includes, sepearated by commas exactly | |
63 | like in a printf statement, the required arguments. It is | |
64 | the responsibility of the user to select only such arguments | |
65 | that are valid in the given context. | |
66 | ||
67 | config AUTOBOOT_ENCRYPTION | |
68 | bool "Enable encryption in autoboot stopping" | |
69 | depends on AUTOBOOT_KEYED | |
70 | default n | |
71 | ||
72 | config AUTOBOOT_DELAY_STR | |
73 | string "Delay autobooting via specific input key / string" | |
74 | depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION | |
75 | help | |
76 | This option delays the automatic boot feature by issuing | |
77 | a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR | |
78 | or the environment variable "bootdelaykey" is specified | |
79 | and this string is received from console input before | |
80 | autoboot starts booting, U-Boot gives a command prompt. The | |
81 | U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is | |
82 | used, otherwise it never times out. | |
83 | ||
84 | config AUTOBOOT_STOP_STR | |
85 | string "Stop autobooting via specific input key / string" | |
86 | depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION | |
87 | help | |
88 | This option enables stopping (aborting) of the automatic | |
89 | boot feature only by issuing a specific input key or | |
90 | string. If CONFIG_AUTOBOOT_STOP_STR or the environment | |
91 | variable "bootstopkey" is specified and this string is | |
92 | received from console input before autoboot starts booting, | |
93 | U-Boot gives a command prompt. The U-Boot prompt never | |
94 | times out, even if CONFIG_BOOT_RETRY_TIME is used. | |
95 | ||
96 | config AUTOBOOT_KEYED_CTRLC | |
97 | bool "Enable Ctrl-C autoboot interruption" | |
98 | depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION | |
99 | default n | |
100 | help | |
101 | This option allows for the boot sequence to be interrupted | |
102 | by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey". | |
103 | Setting this variable provides an escape sequence from the | |
104 | limited "password" strings. | |
105 | ||
106 | config AUTOBOOT_STOP_STR_SHA256 | |
107 | string "Stop autobooting via SHA256 encrypted password" | |
108 | depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION | |
109 | help | |
110 | This option adds the feature to only stop the autobooting, | |
111 | and therefore boot into the U-Boot prompt, when the input | |
112 | string / password matches a values that is encypted via | |
113 | a SHA256 hash and saved in the environment. | |
114 | ||
115 | endmenu | |
116 | ||
e016f0b2 SR |
117 | source "cmd/fastboot/Kconfig" |
118 | ||
72a8cf8d SG |
119 | comment "Commands" |
120 | ||
121 | menu "Info commands" | |
122 | ||
123 | config CMD_BDI | |
124 | bool "bdinfo" | |
125 | default y | |
126 | help | |
127 | Print board info | |
128 | ||
61304dbe MY |
129 | config CMD_CONFIG |
130 | bool "config" | |
131 | select BUILD_BIN2C | |
132 | default SANDBOX | |
133 | help | |
134 | Print ".config" contents. | |
135 | ||
136 | If this option is enabled, the ".config" file contents are embedded | |
137 | in the U-Boot image and can be printed on the console by the "config" | |
138 | command. This provides information of which options are enabled on | |
139 | the running U-Boot. | |
140 | ||
72a8cf8d SG |
141 | config CMD_CONSOLE |
142 | bool "coninfo" | |
143 | default y | |
144 | help | |
145 | Print console devices and information. | |
146 | ||
147 | config CMD_CPU | |
148 | bool "cpu" | |
149 | help | |
150 | Print information about available CPUs. This normally shows the | |
151 | number of CPUs, type (e.g. manufacturer, architecture, product or | |
152 | internal name) and clock frequency. Other information may be | |
153 | available depending on the CPU driver. | |
154 | ||
155 | config CMD_LICENSE | |
156 | bool "license" | |
d726f225 | 157 | select BUILD_BIN2C |
72a8cf8d SG |
158 | help |
159 | Print GPL license text | |
160 | ||
161 | endmenu | |
162 | ||
163 | menu "Boot commands" | |
164 | ||
165 | config CMD_BOOTD | |
166 | bool "bootd" | |
167 | default y | |
168 | help | |
169 | Run the command stored in the environment "bootcmd", i.e. | |
170 | "bootd" does the same thing as "run bootcmd". | |
171 | ||
172 | config CMD_BOOTM | |
173 | bool "bootm" | |
174 | default y | |
175 | help | |
176 | Boot an application image from the memory. | |
177 | ||
ab8243e4 DN |
178 | config CMD_BOOTZ |
179 | bool "bootz" | |
180 | help | |
181 | Boot the Linux zImage | |
182 | ||
26959271 MY |
183 | config CMD_BOOTI |
184 | bool "booti" | |
185 | depends on ARM64 | |
186 | default y | |
187 | help | |
188 | Boot an AArch64 Linux Kernel image from memory. | |
189 | ||
b9939336 AG |
190 | config CMD_BOOTEFI |
191 | bool "bootefi" | |
192 | depends on EFI_LOADER | |
193 | default y | |
194 | help | |
195 | Boot an EFI image from memory. | |
196 | ||
95b62b2e AG |
197 | config CMD_BOOTEFI_HELLO_COMPILE |
198 | bool "Compile a standard EFI hello world binary for testing" | |
199 | depends on CMD_BOOTEFI && (ARM || X86) | |
200 | default y | |
201 | help | |
202 | This compiles a standard EFI hello world application with U-Boot so | |
203 | that it can be used with the test/py testing framework. This is useful | |
204 | for testing that EFI is working at a basic level, and for bringing | |
205 | up EFI support on a new architecture. | |
206 | ||
207 | No additional space will be required in the resulting U-Boot binary | |
208 | when this option is enabled. | |
209 | ||
c7ae3dfd SG |
210 | config CMD_BOOTEFI_HELLO |
211 | bool "Allow booting a standard EFI hello world for testing" | |
95b62b2e | 212 | depends on CMD_BOOTEFI_HELLO_COMPILE |
c7ae3dfd SG |
213 | help |
214 | This adds a standard EFI hello world application to U-Boot so that | |
215 | it can be used with the 'bootefi hello' command. This is useful | |
216 | for testing that EFI is working at a basic level, and for bringing | |
217 | up EFI support on a new architecture. | |
218 | ||
4880b026 TR |
219 | config CMD_BOOTMENU |
220 | bool "bootmenu" | |
221 | select MENU | |
222 | help | |
223 | Add an ANSI terminal boot menu command. | |
224 | ||
72a8cf8d SG |
225 | config CMD_ELF |
226 | bool "bootelf, bootvx" | |
227 | default y | |
228 | help | |
229 | Boot an ELF/vxWorks image from the memory. | |
230 | ||
23922e26 MS |
231 | config CMD_FDT |
232 | bool "Flattened Device Tree utility commands" | |
233 | default y | |
234 | depends on OF_LIBFDT | |
235 | help | |
236 | Do FDT related setup before booting into the Operating System. | |
237 | ||
72a8cf8d SG |
238 | config CMD_GO |
239 | bool "go" | |
240 | default y | |
241 | help | |
242 | Start an application at a given address. | |
243 | ||
244 | config CMD_RUN | |
245 | bool "run" | |
246 | default y | |
247 | help | |
248 | Run the command in the given environment variable. | |
249 | ||
250 | config CMD_IMI | |
251 | bool "iminfo" | |
252 | default y | |
253 | help | |
254 | Print header information for application image. | |
255 | ||
256 | config CMD_IMLS | |
257 | bool "imls" | |
258 | default y | |
259 | help | |
260 | List all images found in flash | |
261 | ||
262 | config CMD_XIMG | |
263 | bool "imxtract" | |
264 | default y | |
265 | help | |
266 | Extract a part of a multi-image. | |
267 | ||
268 | config CMD_POWEROFF | |
269 | bool | |
270 | ||
271 | endmenu | |
272 | ||
273 | menu "Environment commands" | |
274 | ||
ab8243e4 DN |
275 | config CMD_ASKENV |
276 | bool "ask for env variable" | |
277 | help | |
278 | Ask for environment variable | |
279 | ||
72a8cf8d SG |
280 | config CMD_EXPORTENV |
281 | bool "env export" | |
282 | default y | |
283 | help | |
284 | Export environments. | |
285 | ||
286 | config CMD_IMPORTENV | |
287 | bool "env import" | |
288 | default y | |
289 | help | |
290 | Import environments. | |
291 | ||
292 | config CMD_EDITENV | |
293 | bool "editenv" | |
294 | default y | |
295 | help | |
296 | Edit environment variable. | |
297 | ||
ab8243e4 DN |
298 | config CMD_GREPENV |
299 | bool "search env" | |
300 | help | |
301 | Allow for searching environment variables | |
302 | ||
72a8cf8d SG |
303 | config CMD_SAVEENV |
304 | bool "saveenv" | |
305 | default y | |
306 | help | |
307 | Save all environment variables into the compiled-in persistent | |
308 | storage. | |
309 | ||
310 | config CMD_ENV_EXISTS | |
311 | bool "env exists" | |
312 | default y | |
313 | help | |
314 | Check if a variable is defined in the environment for use in | |
315 | shell scripting. | |
316 | ||
317 | endmenu | |
318 | ||
319 | menu "Memory commands" | |
320 | ||
321 | config CMD_MEMORY | |
322 | bool "md, mm, nm, mw, cp, cmp, base, loop" | |
323 | default y | |
324 | help | |
c99d1b3c | 325 | Memory commands. |
72a8cf8d SG |
326 | md - memory display |
327 | mm - memory modify (auto-incrementing address) | |
328 | nm - memory modify (constant address) | |
329 | mw - memory write (fill) | |
330 | cp - memory copy | |
331 | cmp - memory compare | |
332 | base - print or set address offset | |
c99d1b3c | 333 | loop - initialize loop on address range |
72a8cf8d SG |
334 | |
335 | config CMD_CRC32 | |
336 | bool "crc32" | |
337 | default y | |
338 | help | |
339 | Compute CRC32. | |
340 | ||
bea79d7d AP |
341 | config CMD_MD5SUM |
342 | bool "md5sum" | |
343 | default n | |
344 | select MD5 | |
345 | help | |
346 | Compute MD5 checksum. | |
347 | ||
348 | config MD5SUM_VERFIY | |
349 | bool "md5sum -v" | |
350 | default n | |
351 | depends on CMD_MD5SUM | |
352 | help | |
353 | Add -v option to verify data against an MD5 checksum. | |
354 | ||
72a8cf8d SG |
355 | config LOOPW |
356 | bool "loopw" | |
357 | help | |
358 | Infinite write loop on address range | |
359 | ||
360 | config CMD_MEMTEST | |
361 | bool "memtest" | |
362 | help | |
363 | Simple RAM read/write test. | |
364 | ||
365 | config CMD_MX_CYCLIC | |
366 | bool "mdc, mwc" | |
367 | help | |
368 | mdc - memory display cyclic | |
369 | mwc - memory write cyclic | |
370 | ||
371 | config CMD_MEMINFO | |
372 | bool "meminfo" | |
373 | help | |
374 | Display memory information. | |
375 | ||
e9d33e73 MY |
376 | config CMD_UNZIP |
377 | bool "unzip" | |
378 | help | |
379 | Uncompress a zip-compressed memory region. | |
380 | ||
381 | config CMD_ZIP | |
382 | bool "zip" | |
383 | help | |
384 | Compress a memory region with zlib deflate method. | |
385 | ||
72a8cf8d SG |
386 | endmenu |
387 | ||
388 | menu "Device access commands" | |
389 | ||
390 | config CMD_DM | |
391 | bool "dm - Access to driver model information" | |
392 | depends on DM | |
393 | default y | |
394 | help | |
395 | Provides access to driver model data structures and information, | |
396 | such as a list of devices, list of uclasses and the state of each | |
397 | device (e.g. activated). This is not required for operation, but | |
398 | can be useful to see the state of driver model for debugging or | |
399 | interest. | |
400 | ||
401 | config CMD_DEMO | |
402 | bool "demo - Demonstration commands for driver model" | |
403 | depends on DM | |
404 | help | |
405 | Provides a 'demo' command which can be used to play around with | |
406 | driver model. To use this properly you will need to enable one or | |
407 | both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). | |
408 | Otherwise you will always get an empty list of devices. The demo | |
409 | devices are defined in the sandbox device tree, so the easiest | |
410 | option is to use sandbox and pass the -d point to sandbox's | |
411 | u-boot.dtb file. | |
412 | ||
413 | config CMD_LOADB | |
414 | bool "loadb" | |
415 | default y | |
416 | help | |
417 | Load a binary file over serial line. | |
418 | ||
419 | config CMD_LOADS | |
420 | bool "loads" | |
421 | default y | |
422 | help | |
423 | Load an S-Record file over serial line | |
424 | ||
425 | config CMD_FLASH | |
426 | bool "flinfo, erase, protect" | |
427 | default y | |
428 | help | |
429 | NOR flash support. | |
430 | flinfo - print FLASH memory information | |
431 | erase - FLASH memory | |
432 | protect - enable or disable FLASH write protection | |
433 | ||
b331cd62 PD |
434 | config CMD_GPT |
435 | bool "GPT (GUID Partition Table) command" | |
436 | select PARTITION_UUIDS | |
437 | select EFI_PARTITION | |
438 | help | |
439 | Enable the 'gpt' command to ready and write GPT style partition | |
440 | tables. | |
441 | ||
72a8cf8d | 442 | config CMD_ARMFLASH |
78d1e1d0 | 443 | #depends on FLASH_CFI_DRIVER |
72a8cf8d SG |
444 | bool "armflash" |
445 | help | |
446 | ARM Ltd reference designs flash partition access | |
447 | ||
ab8243e4 DN |
448 | config CMD_MMC |
449 | bool "mmc" | |
450 | help | |
451 | MMC memory mapped support. | |
452 | ||
72a8cf8d SG |
453 | config CMD_NAND |
454 | bool "nand" | |
455 | help | |
456 | NAND support. | |
457 | ||
b331cd62 PD |
458 | config CMD_PART |
459 | bool "part" | |
460 | select PARTITION_UUIDS | |
461 | help | |
462 | Read and display information about the partition table on | |
463 | various media. | |
464 | ||
72a8cf8d SG |
465 | config CMD_SF |
466 | bool "sf" | |
467 | help | |
468 | SPI Flash support | |
469 | ||
470 | config CMD_SPI | |
471 | bool "sspi" | |
472 | help | |
473 | SPI utility command. | |
474 | ||
475 | config CMD_I2C | |
476 | bool "i2c" | |
477 | help | |
478 | I2C support. | |
479 | ||
480 | config CMD_USB | |
481 | bool "usb" | |
482 | help | |
483 | USB support. | |
484 | ||
ab8243e4 DN |
485 | config CMD_DFU |
486 | bool "dfu" | |
6828e602 | 487 | select USB_FUNCTION_DFU |
ab8243e4 DN |
488 | help |
489 | Enables the command "dfu" which is used to have U-Boot create a DFU | |
490 | class device via USB. | |
491 | ||
492 | config CMD_USB_MASS_STORAGE | |
493 | bool "UMS usb mass storage" | |
494 | help | |
495 | USB mass storage support | |
496 | ||
72a8cf8d SG |
497 | config CMD_FPGA |
498 | bool "fpga" | |
499 | default y | |
500 | help | |
501 | FPGA support. | |
502 | ||
503 | config CMD_REMOTEPROC | |
504 | bool "remoteproc" | |
505 | depends on REMOTEPROC | |
506 | help | |
507 | Support for Remote Processor control | |
508 | ||
509 | config CMD_GPIO | |
510 | bool "gpio" | |
511 | help | |
512 | GPIO support. | |
513 | ||
514 | endmenu | |
515 | ||
516 | ||
517 | menu "Shell scripting commands" | |
518 | ||
519 | config CMD_ECHO | |
520 | bool "echo" | |
521 | default y | |
522 | help | |
523 | Echo args to console | |
524 | ||
525 | config CMD_ITEST | |
526 | bool "itest" | |
527 | default y | |
528 | help | |
529 | Return true/false on integer compare. | |
530 | ||
531 | config CMD_SOURCE | |
532 | bool "source" | |
533 | default y | |
534 | help | |
535 | Run script from memory | |
536 | ||
537 | config CMD_SETEXPR | |
538 | bool "setexpr" | |
539 | default y | |
540 | help | |
541 | Evaluate boolean and math expressions and store the result in an env | |
542 | variable. | |
543 | Also supports loading the value at a memory location into a variable. | |
544 | If CONFIG_REGEX is enabled, setexpr also supports a gsub function. | |
545 | ||
546 | endmenu | |
547 | ||
548 | menu "Network commands" | |
549 | ||
550 | config CMD_NET | |
551 | bool "bootp, tftpboot" | |
552 | select NET | |
553 | default y | |
554 | help | |
555 | Network commands. | |
556 | bootp - boot image via network using BOOTP/TFTP protocol | |
557 | tftpboot - boot image via network using TFTP protocol | |
558 | ||
559 | config CMD_TFTPPUT | |
560 | bool "tftp put" | |
561 | help | |
562 | TFTP put command, for uploading files to a server | |
563 | ||
564 | config CMD_TFTPSRV | |
565 | bool "tftpsrv" | |
566 | help | |
567 | Act as a TFTP server and boot the first received file | |
568 | ||
569 | config CMD_RARP | |
570 | bool "rarpboot" | |
571 | help | |
572 | Boot image via network using RARP/TFTP protocol | |
573 | ||
574 | config CMD_DHCP | |
575 | bool "dhcp" | |
576 | help | |
577 | Boot image via network using DHCP/TFTP protocol | |
578 | ||
bfb380b3 YM |
579 | config CMD_PXE |
580 | bool "pxe" | |
581 | select MENU | |
582 | help | |
583 | Boot image via network using PXE protocol | |
584 | ||
72a8cf8d SG |
585 | config CMD_NFS |
586 | bool "nfs" | |
587 | default y | |
588 | help | |
589 | Boot image via network using NFS protocol. | |
590 | ||
ab8243e4 DN |
591 | config CMD_MII |
592 | bool "mii" | |
593 | help | |
594 | Enable MII utility commands. | |
595 | ||
72a8cf8d SG |
596 | config CMD_PING |
597 | bool "ping" | |
598 | help | |
599 | Send ICMP ECHO_REQUEST to network host | |
600 | ||
601 | config CMD_CDP | |
602 | bool "cdp" | |
603 | help | |
604 | Perform CDP network configuration | |
605 | ||
606 | config CMD_SNTP | |
607 | bool "sntp" | |
608 | help | |
609 | Synchronize RTC via network | |
610 | ||
611 | config CMD_DNS | |
612 | bool "dns" | |
613 | help | |
614 | Lookup the IP of a hostname | |
615 | ||
616 | config CMD_LINK_LOCAL | |
617 | bool "linklocal" | |
618 | help | |
619 | Acquire a network IP address using the link-local protocol | |
620 | ||
621 | endmenu | |
622 | ||
623 | menu "Misc commands" | |
624 | ||
cd3d4880 TM |
625 | config CMD_BKOPS_ENABLE |
626 | bool "mmc bkops enable" | |
627 | depends on CMD_MMC | |
628 | default n | |
629 | help | |
630 | Enable command for setting manual background operations handshake | |
631 | on a eMMC device. The feature is optionally available on eMMC devices | |
632 | conforming to standard >= 4.41. | |
633 | ||
e40cf34a EN |
634 | config CMD_BLOCK_CACHE |
635 | bool "blkcache - control and stats for block cache" | |
636 | depends on BLOCK_CACHE | |
637 | default y if BLOCK_CACHE | |
638 | help | |
639 | Enable the blkcache command, which can be used to control the | |
640 | operation of the cache functions. | |
641 | This is most useful when fine-tuning the operation of the cache | |
642 | during development, but also allows the cache to be disabled when | |
643 | it might hurt performance (e.g. when using the ums command). | |
644 | ||
ab8243e4 DN |
645 | config CMD_CACHE |
646 | bool "icache or dcache" | |
647 | help | |
648 | Enable the "icache" and "dcache" commands | |
649 | ||
72a8cf8d SG |
650 | config CMD_TIME |
651 | bool "time" | |
652 | help | |
653 | Run commands and summarize execution time. | |
654 | ||
655 | # TODO: rename to CMD_SLEEP | |
656 | config CMD_MISC | |
657 | bool "sleep" | |
658 | default y | |
659 | help | |
660 | Delay execution for some time | |
661 | ||
662 | config CMD_TIMER | |
663 | bool "timer" | |
664 | help | |
665 | Access the system timer. | |
666 | ||
667 | config CMD_SETGETDCR | |
668 | bool "getdcr, setdcr, getidcr, setidcr" | |
669 | depends on 4xx | |
670 | default y | |
671 | help | |
672 | getdcr - Get an AMCC PPC 4xx DCR's value | |
673 | setdcr - Set an AMCC PPC 4xx DCR's value | |
674 | getidcr - Get a register value via indirect DCR addressing | |
675 | setidcr - Set a register value via indirect DCR addressing | |
676 | ||
677 | config CMD_SOUND | |
678 | bool "sound" | |
679 | depends on SOUND | |
680 | help | |
681 | This provides basic access to the U-Boot's sound support. The main | |
682 | feature is to play a beep. | |
683 | ||
684 | sound init - set up sound system | |
685 | sound play - play a sound | |
686 | ||
18686590 | 687 | config CMD_QFW |
dd6f3abb | 688 | bool "qfw" |
fcf5c041 | 689 | select QFW |
dd6f3abb TR |
690 | help |
691 | This provides access to the QEMU firmware interface. The main | |
692 | feature is to allow easy loading of files passed to qemu-system | |
693 | via -kernel / -initrd | |
fa61ef6b KP |
694 | |
695 | source "cmd/mvebu/Kconfig" | |
696 | ||
72a8cf8d SG |
697 | endmenu |
698 | ||
699 | config CMD_BOOTSTAGE | |
700 | bool "Enable the 'bootstage' command" | |
701 | depends on BOOTSTAGE | |
702 | help | |
703 | Add a 'bootstage' command which supports printing a report | |
704 | and un/stashing of bootstage data. | |
705 | ||
706 | menu "Power commands" | |
707 | config CMD_PMIC | |
708 | bool "Enable Driver Model PMIC command" | |
709 | depends on DM_PMIC | |
710 | help | |
711 | This is the pmic command, based on a driver model pmic's API. | |
712 | Command features are unchanged: | |
713 | - list - list pmic devices | |
714 | - pmic dev <id> - show or [set] operating pmic device (NEW) | |
715 | - pmic dump - dump registers | |
716 | - pmic read address - read byte of register at address | |
717 | - pmic write address - write byte to register at address | |
718 | The only one change for this command is 'dev' subcommand. | |
719 | ||
720 | config CMD_REGULATOR | |
721 | bool "Enable Driver Model REGULATOR command" | |
722 | depends on DM_REGULATOR | |
723 | help | |
724 | This command is based on driver model regulator's API. | |
725 | User interface features: | |
726 | - list - list regulator devices | |
727 | - regulator dev <id> - show or [set] operating regulator device | |
728 | - regulator info - print constraints info | |
729 | - regulator status - print operating status | |
730 | - regulator value <val] <-f> - print/[set] voltage value [uV] | |
731 | - regulator current <val> - print/[set] current value [uA] | |
732 | - regulator mode <id> - print/[set] operating mode id | |
733 | - regulator enable - enable the regulator output | |
734 | - regulator disable - disable the regulator output | |
735 | ||
736 | The '-f' (force) option can be used for set the value which exceeds | |
737 | the limits, which are found in device-tree and are kept in regulator's | |
738 | uclass platdata structure. | |
739 | ||
740 | endmenu | |
741 | ||
742 | menu "Security commands" | |
743 | config CMD_TPM | |
744 | bool "Enable the 'tpm' command" | |
745 | depends on TPM | |
746 | help | |
747 | This provides a means to talk to a TPM from the command line. A wide | |
748 | range of commands if provided - see 'tpm help' for details. The | |
749 | command requires a suitable TPM on your board and the correct driver | |
750 | must be enabled. | |
751 | ||
752 | config CMD_TPM_TEST | |
753 | bool "Enable the 'tpm test' command" | |
754 | depends on CMD_TPM | |
755 | help | |
756 | This provides a a series of tests to confirm that the TPM is working | |
757 | correctly. The tests cover initialisation, non-volatile RAM, extend, | |
758 | global lock and checking that timing is within expectations. The | |
759 | tests pass correctly on Infineon TPMs but may need to be adjusted | |
760 | for other devices. | |
761 | ||
762 | endmenu | |
bfeba017 MF |
763 | |
764 | menu "Firmware commands" | |
765 | config CMD_CROS_EC | |
766 | bool "Enable crosec command" | |
767 | depends on CROS_EC | |
768 | default y | |
769 | help | |
770 | Enable command-line access to the Chrome OS EC (Embedded | |
771 | Controller). This provides the 'crosec' command which has | |
772 | a number of sub-commands for performing EC tasks such as | |
773 | updating its flash, accessing a small saved context area | |
774 | and talking to the I2C bus behind the EC (if there is one). | |
775 | endmenu | |
72a8cf8d | 776 | |
ab8243e4 DN |
777 | menu "Filesystem commands" |
778 | config CMD_EXT2 | |
779 | bool "ext2 command support" | |
780 | help | |
781 | Enables EXT2 FS command | |
782 | ||
783 | config CMD_EXT4 | |
784 | bool "ext4 command support" | |
785 | help | |
786 | Enables EXT4 FS command | |
787 | ||
788 | config CMD_EXT4_WRITE | |
789 | depends on CMD_EXT4 | |
790 | bool "ext4 write command support" | |
791 | help | |
792 | Enables EXT4 FS write command | |
793 | ||
794 | config CMD_FAT | |
795 | bool "FAT command support" | |
796 | help | |
797 | Support for the FAT fs | |
798 | ||
799 | config CMD_FS_GENERIC | |
800 | bool "filesystem commands" | |
801 | help | |
802 | Enables filesystem commands (e.g. load, ls) that work for multiple | |
803 | fs types. | |
804 | endmenu | |
805 | ||
8f2fe0c8 HS |
806 | config CMD_UBI |
807 | tristate "Enable UBI - Unsorted block images commands" | |
808 | select CRC32 | |
809 | select MTD_UBI | |
810 | help | |
811 | UBI is a software layer above MTD layer which admits use of LVM-like | |
812 | logical volumes on top of MTD devices, hides some complexities of | |
813 | flash chips like wear and bad blocks and provides some other useful | |
814 | capabilities. Please, consult the MTD web site for more details | |
815 | (www.linux-mtd.infradead.org). Activate this option if you want | |
816 | to use U-Boot UBI commands. | |
817 | ||
72a8cf8d | 818 | endmenu |