]>
Commit | Line | Data |
---|---|---|
11f610ed SG |
1 | /* |
2 | * (C) Copyright 2001 | |
3 | * Denis Peter, MPL AG Switzerland | |
4 | * | |
5 | * SPDX-License-Identifier: GPL-2.0+ | |
6 | */ | |
7 | ||
8 | #include <common.h> | |
535556b2 | 9 | #include <dm.h> |
11f610ed SG |
10 | #include <inttypes.h> |
11 | #include <pci.h> | |
12 | #include <scsi.h> | |
13 | ||
14 | #ifdef CONFIG_SCSI_DEV_LIST | |
15 | #define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST | |
16 | #else | |
17 | #ifdef CONFIG_SCSI_SYM53C8XX | |
18 | #define SCSI_VEND_ID 0x1000 | |
19 | #ifndef CONFIG_SCSI_DEV_ID | |
20 | #define SCSI_DEV_ID 0x0001 | |
21 | #else | |
22 | #define SCSI_DEV_ID CONFIG_SCSI_DEV_ID | |
23 | #endif | |
24 | #elif defined CONFIG_SATA_ULI5288 | |
25 | ||
26 | #define SCSI_VEND_ID 0x10b9 | |
27 | #define SCSI_DEV_ID 0x5288 | |
28 | ||
29 | #elif !defined(CONFIG_SCSI_AHCI_PLAT) | |
30 | #error no scsi device defined | |
31 | #endif | |
32 | #define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} | |
33 | #endif | |
34 | ||
35 | #if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) | |
36 | const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST }; | |
37 | #endif | |
38 | static ccb tempccb; /* temporary scsi command buffer */ | |
39 | ||
40 | static unsigned char tempbuff[512]; /* temporary data buffer */ | |
41 | ||
42 | static int scsi_max_devs; /* number of highest available scsi device */ | |
43 | ||
44 | static int scsi_curr_dev; /* current device */ | |
45 | ||
46 | static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; | |
47 | ||
48 | /* almost the maximum amount of the scsi_ext command.. */ | |
49 | #define SCSI_MAX_READ_BLK 0xFFFF | |
50 | #define SCSI_LBA48_READ 0xFFFFFFF | |
51 | ||
52 | #ifdef CONFIG_SYS_64BIT_LBA | |
53 | void scsi_setup_read16(ccb *pccb, lbaint_t start, unsigned long blocks) | |
54 | { | |
55 | pccb->cmd[0] = SCSI_READ16; | |
56 | pccb->cmd[1] = pccb->lun << 5; | |
57 | pccb->cmd[2] = (unsigned char)(start >> 56) & 0xff; | |
58 | pccb->cmd[3] = (unsigned char)(start >> 48) & 0xff; | |
59 | pccb->cmd[4] = (unsigned char)(start >> 40) & 0xff; | |
60 | pccb->cmd[5] = (unsigned char)(start >> 32) & 0xff; | |
61 | pccb->cmd[6] = (unsigned char)(start >> 24) & 0xff; | |
62 | pccb->cmd[7] = (unsigned char)(start >> 16) & 0xff; | |
63 | pccb->cmd[8] = (unsigned char)(start >> 8) & 0xff; | |
64 | pccb->cmd[9] = (unsigned char)start & 0xff; | |
65 | pccb->cmd[10] = 0; | |
66 | pccb->cmd[11] = (unsigned char)(blocks >> 24) & 0xff; | |
67 | pccb->cmd[12] = (unsigned char)(blocks >> 16) & 0xff; | |
68 | pccb->cmd[13] = (unsigned char)(blocks >> 8) & 0xff; | |
69 | pccb->cmd[14] = (unsigned char)blocks & 0xff; | |
70 | pccb->cmd[15] = 0; | |
71 | pccb->cmdlen = 16; | |
72 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
73 | debug("scsi_setup_read16: cmd: %02X %02X startblk %02X%02X%02X%02X%02X%02X%02X%02X blccnt %02X%02X%02X%02X\n", | |
74 | pccb->cmd[0], pccb->cmd[1], | |
75 | pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], | |
76 | pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9], | |
77 | pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]); | |
78 | } | |
79 | #endif | |
80 | ||
81 | void scsi_setup_read_ext(ccb *pccb, lbaint_t start, unsigned short blocks) | |
82 | { | |
83 | pccb->cmd[0] = SCSI_READ10; | |
84 | pccb->cmd[1] = pccb->lun << 5; | |
85 | pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; | |
86 | pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; | |
87 | pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; | |
88 | pccb->cmd[5] = (unsigned char)start & 0xff; | |
89 | pccb->cmd[6] = 0; | |
90 | pccb->cmd[7] = (unsigned char)(blocks >> 8) & 0xff; | |
91 | pccb->cmd[8] = (unsigned char)blocks & 0xff; | |
92 | pccb->cmd[6] = 0; | |
93 | pccb->cmdlen = 10; | |
94 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
95 | debug("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", | |
96 | pccb->cmd[0], pccb->cmd[1], | |
97 | pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], | |
98 | pccb->cmd[7], pccb->cmd[8]); | |
99 | } | |
100 | ||
101 | void scsi_setup_write_ext(ccb *pccb, lbaint_t start, unsigned short blocks) | |
102 | { | |
103 | pccb->cmd[0] = SCSI_WRITE10; | |
104 | pccb->cmd[1] = pccb->lun << 5; | |
105 | pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; | |
106 | pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; | |
107 | pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; | |
108 | pccb->cmd[5] = (unsigned char)start & 0xff; | |
109 | pccb->cmd[6] = 0; | |
110 | pccb->cmd[7] = ((unsigned char)(blocks >> 8)) & 0xff; | |
111 | pccb->cmd[8] = (unsigned char)blocks & 0xff; | |
112 | pccb->cmd[9] = 0; | |
113 | pccb->cmdlen = 10; | |
114 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
115 | debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", | |
116 | __func__, | |
117 | pccb->cmd[0], pccb->cmd[1], | |
118 | pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], | |
119 | pccb->cmd[7], pccb->cmd[8]); | |
120 | } | |
121 | ||
122 | void scsi_setup_read6(ccb *pccb, lbaint_t start, unsigned short blocks) | |
123 | { | |
124 | pccb->cmd[0] = SCSI_READ6; | |
125 | pccb->cmd[1] = pccb->lun << 5 | ((unsigned char)(start >> 16) & 0x1f); | |
126 | pccb->cmd[2] = (unsigned char)(start >> 8) & 0xff; | |
127 | pccb->cmd[3] = (unsigned char)start & 0xff; | |
128 | pccb->cmd[4] = (unsigned char)blocks & 0xff; | |
129 | pccb->cmd[5] = 0; | |
130 | pccb->cmdlen = 6; | |
131 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
132 | debug("scsi_setup_read6: cmd: %02X %02X startblk %02X%02X blccnt %02X\n", | |
133 | pccb->cmd[0], pccb->cmd[1], | |
134 | pccb->cmd[2], pccb->cmd[3], pccb->cmd[4]); | |
135 | } | |
136 | ||
137 | ||
138 | void scsi_setup_inquiry(ccb *pccb) | |
139 | { | |
140 | pccb->cmd[0] = SCSI_INQUIRY; | |
141 | pccb->cmd[1] = pccb->lun << 5; | |
142 | pccb->cmd[2] = 0; | |
143 | pccb->cmd[3] = 0; | |
144 | if (pccb->datalen > 255) | |
145 | pccb->cmd[4] = 255; | |
146 | else | |
147 | pccb->cmd[4] = (unsigned char)pccb->datalen; | |
148 | pccb->cmd[5] = 0; | |
149 | pccb->cmdlen = 6; | |
150 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
151 | } | |
152 | ||
535556b2 SG |
153 | #ifdef CONFIG_BLK |
154 | static ulong scsi_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, | |
155 | void *buffer) | |
156 | #else | |
11f610ed SG |
157 | static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr, |
158 | lbaint_t blkcnt, void *buffer) | |
535556b2 | 159 | #endif |
11f610ed | 160 | { |
535556b2 SG |
161 | #ifdef CONFIG_BLK |
162 | struct blk_desc *block_dev = dev_get_uclass_platdata(dev); | |
163 | #endif | |
11f610ed SG |
164 | int device = block_dev->devnum; |
165 | lbaint_t start, blks; | |
166 | uintptr_t buf_addr; | |
167 | unsigned short smallblks = 0; | |
168 | ccb *pccb = (ccb *)&tempccb; | |
169 | device &= 0xff; | |
170 | ||
171 | /* Setup device */ | |
172 | pccb->target = scsi_dev_desc[device].target; | |
173 | pccb->lun = scsi_dev_desc[device].lun; | |
174 | buf_addr = (unsigned long)buffer; | |
175 | start = blknr; | |
176 | blks = blkcnt; | |
177 | debug("\nscsi_read: dev %d startblk " LBAF | |
178 | ", blccnt " LBAF " buffer %lx\n", | |
179 | device, start, blks, (unsigned long)buffer); | |
180 | do { | |
181 | pccb->pdata = (unsigned char *)buf_addr; | |
182 | #ifdef CONFIG_SYS_64BIT_LBA | |
183 | if (start > SCSI_LBA48_READ) { | |
184 | unsigned long blocks; | |
185 | blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK); | |
186 | pccb->datalen = scsi_dev_desc[device].blksz * blocks; | |
187 | scsi_setup_read16(pccb, start, blocks); | |
188 | start += blocks; | |
189 | blks -= blocks; | |
190 | } else | |
191 | #endif | |
192 | if (blks > SCSI_MAX_READ_BLK) { | |
193 | pccb->datalen = scsi_dev_desc[device].blksz * | |
194 | SCSI_MAX_READ_BLK; | |
195 | smallblks = SCSI_MAX_READ_BLK; | |
196 | scsi_setup_read_ext(pccb, start, smallblks); | |
197 | start += SCSI_MAX_READ_BLK; | |
198 | blks -= SCSI_MAX_READ_BLK; | |
199 | } else { | |
200 | pccb->datalen = scsi_dev_desc[device].blksz * blks; | |
201 | smallblks = (unsigned short)blks; | |
202 | scsi_setup_read_ext(pccb, start, smallblks); | |
203 | start += blks; | |
204 | blks = 0; | |
205 | } | |
206 | debug("scsi_read_ext: startblk " LBAF | |
207 | ", blccnt %x buffer %" PRIXPTR "\n", | |
208 | start, smallblks, buf_addr); | |
209 | if (scsi_exec(pccb) != true) { | |
210 | scsi_print_error(pccb); | |
211 | blkcnt -= blks; | |
212 | break; | |
213 | } | |
214 | buf_addr += pccb->datalen; | |
215 | } while (blks != 0); | |
216 | debug("scsi_read_ext: end startblk " LBAF | |
217 | ", blccnt %x buffer %" PRIXPTR "\n", start, smallblks, buf_addr); | |
218 | return blkcnt; | |
219 | } | |
220 | ||
221 | /******************************************************************************* | |
222 | * scsi_write | |
223 | */ | |
224 | ||
225 | /* Almost the maximum amount of the scsi_ext command.. */ | |
226 | #define SCSI_MAX_WRITE_BLK 0xFFFF | |
227 | ||
535556b2 SG |
228 | #ifdef CONFIG_BLK |
229 | static ulong scsi_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, | |
230 | const void *buffer) | |
231 | #else | |
11f610ed SG |
232 | static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr, |
233 | lbaint_t blkcnt, const void *buffer) | |
535556b2 | 234 | #endif |
11f610ed | 235 | { |
535556b2 SG |
236 | #ifdef CONFIG_BLK |
237 | struct blk_desc *block_dev = dev_get_uclass_platdata(dev); | |
238 | #endif | |
11f610ed SG |
239 | int device = block_dev->devnum; |
240 | lbaint_t start, blks; | |
241 | uintptr_t buf_addr; | |
242 | unsigned short smallblks; | |
243 | ccb *pccb = (ccb *)&tempccb; | |
244 | ||
245 | device &= 0xff; | |
246 | ||
247 | /* Setup device */ | |
248 | pccb->target = scsi_dev_desc[device].target; | |
249 | pccb->lun = scsi_dev_desc[device].lun; | |
250 | buf_addr = (unsigned long)buffer; | |
251 | start = blknr; | |
252 | blks = blkcnt; | |
253 | debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", | |
254 | __func__, device, start, blks, (unsigned long)buffer); | |
255 | do { | |
256 | pccb->pdata = (unsigned char *)buf_addr; | |
257 | if (blks > SCSI_MAX_WRITE_BLK) { | |
258 | pccb->datalen = (scsi_dev_desc[device].blksz * | |
259 | SCSI_MAX_WRITE_BLK); | |
260 | smallblks = SCSI_MAX_WRITE_BLK; | |
261 | scsi_setup_write_ext(pccb, start, smallblks); | |
262 | start += SCSI_MAX_WRITE_BLK; | |
263 | blks -= SCSI_MAX_WRITE_BLK; | |
264 | } else { | |
265 | pccb->datalen = scsi_dev_desc[device].blksz * blks; | |
266 | smallblks = (unsigned short)blks; | |
267 | scsi_setup_write_ext(pccb, start, smallblks); | |
268 | start += blks; | |
269 | blks = 0; | |
270 | } | |
271 | debug("%s: startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", | |
272 | __func__, start, smallblks, buf_addr); | |
273 | if (scsi_exec(pccb) != true) { | |
274 | scsi_print_error(pccb); | |
275 | blkcnt -= blks; | |
276 | break; | |
277 | } | |
278 | buf_addr += pccb->datalen; | |
279 | } while (blks != 0); | |
280 | debug("%s: end startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", | |
281 | __func__, start, smallblks, buf_addr); | |
282 | return blkcnt; | |
283 | } | |
284 | ||
285 | int scsi_get_disk_count(void) | |
286 | { | |
287 | return scsi_max_devs; | |
288 | } | |
289 | ||
290 | #if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) | |
291 | void scsi_init(void) | |
292 | { | |
293 | int busdevfunc = -1; | |
294 | int i; | |
295 | /* | |
296 | * Find a device from the list, this driver will support a single | |
297 | * controller. | |
298 | */ | |
299 | for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { | |
300 | /* get PCI Device ID */ | |
301 | #ifdef CONFIG_DM_PCI | |
302 | struct udevice *dev; | |
303 | int ret; | |
304 | ||
305 | ret = dm_pci_find_device(scsi_device_list[i].vendor, | |
306 | scsi_device_list[i].device, 0, &dev); | |
307 | if (!ret) { | |
308 | busdevfunc = dm_pci_get_bdf(dev); | |
309 | break; | |
310 | } | |
311 | #else | |
312 | busdevfunc = pci_find_device(scsi_device_list[i].vendor, | |
313 | scsi_device_list[i].device, | |
314 | 0); | |
315 | #endif | |
316 | if (busdevfunc != -1) | |
317 | break; | |
318 | } | |
319 | ||
320 | if (busdevfunc == -1) { | |
321 | printf("Error: SCSI Controller(s) "); | |
322 | for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { | |
323 | printf("%04X:%04X ", | |
324 | scsi_device_list[i].vendor, | |
325 | scsi_device_list[i].device); | |
326 | } | |
327 | printf("not found\n"); | |
328 | return; | |
329 | } | |
330 | #ifdef DEBUG | |
331 | else { | |
332 | printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n", | |
333 | scsi_device_list[i].vendor, | |
334 | scsi_device_list[i].device, | |
335 | (busdevfunc >> 16) & 0xFF, | |
336 | (busdevfunc >> 11) & 0x1F, | |
337 | (busdevfunc >> 8) & 0x7); | |
338 | } | |
339 | #endif | |
340 | bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci"); | |
341 | scsi_low_level_init(busdevfunc); | |
342 | scsi_scan(1); | |
343 | bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI); | |
344 | } | |
345 | #endif | |
346 | ||
11f610ed SG |
347 | /* copy src to dest, skipping leading and trailing blanks |
348 | * and null terminate the string | |
349 | */ | |
350 | void scsi_ident_cpy(unsigned char *dest, unsigned char *src, unsigned int len) | |
351 | { | |
352 | int start, end; | |
353 | ||
354 | start = 0; | |
355 | while (start < len) { | |
356 | if (src[start] != ' ') | |
357 | break; | |
358 | start++; | |
359 | } | |
360 | end = len-1; | |
361 | while (end > start) { | |
362 | if (src[end] != ' ') | |
363 | break; | |
364 | end--; | |
365 | } | |
366 | for (; start <= end; start++) | |
367 | *dest ++= src[start]; | |
368 | *dest = '\0'; | |
369 | } | |
370 | ||
371 | ||
372 | /* Trim trailing blanks, and NUL-terminate string | |
373 | */ | |
374 | void scsi_trim_trail(unsigned char *str, unsigned int len) | |
375 | { | |
376 | unsigned char *p = str + len - 1; | |
377 | ||
378 | while (len-- > 0) { | |
379 | *p-- = '\0'; | |
380 | if (*p != ' ') | |
381 | return; | |
382 | } | |
383 | } | |
384 | ||
385 | int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz) | |
386 | { | |
387 | *capacity = 0; | |
388 | ||
389 | memset(pccb->cmd, '\0', sizeof(pccb->cmd)); | |
390 | pccb->cmd[0] = SCSI_RD_CAPAC10; | |
391 | pccb->cmd[1] = pccb->lun << 5; | |
392 | pccb->cmdlen = 10; | |
393 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
394 | ||
395 | pccb->datalen = 8; | |
396 | if (scsi_exec(pccb) != true) | |
397 | return 1; | |
398 | ||
399 | *capacity = ((lbaint_t)pccb->pdata[0] << 24) | | |
400 | ((lbaint_t)pccb->pdata[1] << 16) | | |
401 | ((lbaint_t)pccb->pdata[2] << 8) | | |
402 | ((lbaint_t)pccb->pdata[3]); | |
403 | ||
404 | if (*capacity != 0xffffffff) { | |
405 | /* Read capacity (10) was sufficient for this drive. */ | |
406 | *blksz = ((unsigned long)pccb->pdata[4] << 24) | | |
407 | ((unsigned long)pccb->pdata[5] << 16) | | |
408 | ((unsigned long)pccb->pdata[6] << 8) | | |
409 | ((unsigned long)pccb->pdata[7]); | |
410 | return 0; | |
411 | } | |
412 | ||
413 | /* Read capacity (10) was insufficient. Use read capacity (16). */ | |
414 | memset(pccb->cmd, '\0', sizeof(pccb->cmd)); | |
415 | pccb->cmd[0] = SCSI_RD_CAPAC16; | |
416 | pccb->cmd[1] = 0x10; | |
417 | pccb->cmdlen = 16; | |
418 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
419 | ||
420 | pccb->datalen = 16; | |
421 | if (scsi_exec(pccb) != true) | |
422 | return 1; | |
423 | ||
424 | *capacity = ((uint64_t)pccb->pdata[0] << 56) | | |
425 | ((uint64_t)pccb->pdata[1] << 48) | | |
426 | ((uint64_t)pccb->pdata[2] << 40) | | |
427 | ((uint64_t)pccb->pdata[3] << 32) | | |
428 | ((uint64_t)pccb->pdata[4] << 24) | | |
429 | ((uint64_t)pccb->pdata[5] << 16) | | |
430 | ((uint64_t)pccb->pdata[6] << 8) | | |
431 | ((uint64_t)pccb->pdata[7]); | |
432 | ||
433 | *blksz = ((uint64_t)pccb->pdata[8] << 56) | | |
434 | ((uint64_t)pccb->pdata[9] << 48) | | |
435 | ((uint64_t)pccb->pdata[10] << 40) | | |
436 | ((uint64_t)pccb->pdata[11] << 32) | | |
437 | ((uint64_t)pccb->pdata[12] << 24) | | |
438 | ((uint64_t)pccb->pdata[13] << 16) | | |
439 | ((uint64_t)pccb->pdata[14] << 8) | | |
440 | ((uint64_t)pccb->pdata[15]); | |
441 | ||
442 | return 0; | |
443 | } | |
444 | ||
445 | ||
446 | /* | |
447 | * Some setup (fill-in) routines | |
448 | */ | |
449 | void scsi_setup_test_unit_ready(ccb *pccb) | |
450 | { | |
451 | pccb->cmd[0] = SCSI_TST_U_RDY; | |
452 | pccb->cmd[1] = pccb->lun << 5; | |
453 | pccb->cmd[2] = 0; | |
454 | pccb->cmd[3] = 0; | |
455 | pccb->cmd[4] = 0; | |
456 | pccb->cmd[5] = 0; | |
457 | pccb->cmdlen = 6; | |
458 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
459 | } | |
460 | ||
92ca476c MS |
461 | static void scsi_init_dev_desc(struct blk_desc *dev_desc, int devnum) |
462 | { | |
463 | dev_desc->target = 0xff; | |
464 | dev_desc->lun = 0xff; | |
465 | dev_desc->lba = 0; | |
466 | dev_desc->blksz = 0; | |
467 | dev_desc->log2blksz = | |
468 | LOG2_INVALID(typeof(dev_desc->log2blksz)); | |
469 | dev_desc->type = DEV_TYPE_UNKNOWN; | |
470 | dev_desc->vendor[0] = 0; | |
471 | dev_desc->product[0] = 0; | |
472 | dev_desc->revision[0] = 0; | |
473 | dev_desc->removable = false; | |
474 | dev_desc->if_type = IF_TYPE_SCSI; | |
475 | dev_desc->devnum = devnum; | |
476 | dev_desc->part_type = PART_TYPE_UNKNOWN; | |
477 | #ifndef CONFIG_BLK | |
478 | dev_desc->block_read = scsi_read; | |
479 | dev_desc->block_write = scsi_write; | |
480 | #endif | |
481 | } | |
482 | ||
570712f4 MS |
483 | /** |
484 | * scsi_detect_dev - Detect scsi device | |
485 | * | |
486 | * @pccb: pointer to temporary SCSI command block | |
487 | * @dev_desc: block device description | |
570712f4 MS |
488 | * |
489 | * The scsi_detect_dev detects and fills a dev_desc structure when the device is | |
4dbee176 | 490 | * detected. The LUN number is taken from the struct blk_desc *dev_desc. |
570712f4 MS |
491 | * |
492 | * Return: 0 on success, error value otherwise | |
493 | */ | |
4dbee176 | 494 | static int scsi_detect_dev(ccb *pccb, struct blk_desc *dev_desc) |
570712f4 MS |
495 | { |
496 | unsigned char perq, modi; | |
497 | lbaint_t capacity; | |
498 | unsigned long blksz; | |
499 | ||
4dbee176 | 500 | pccb->lun = dev_desc->lun; |
570712f4 MS |
501 | pccb->pdata = (unsigned char *)&tempbuff; |
502 | pccb->datalen = 512; | |
503 | scsi_setup_inquiry(pccb); | |
504 | if (scsi_exec(pccb) != true) { | |
505 | if (pccb->contr_stat == SCSI_SEL_TIME_OUT) { | |
506 | /* | |
507 | * selection timeout => assuming no | |
508 | * device present | |
509 | */ | |
510 | debug("Selection timeout ID %d\n", | |
511 | pccb->target); | |
512 | return -ETIMEDOUT; | |
513 | } | |
514 | scsi_print_error(pccb); | |
515 | return -ENODEV; | |
516 | } | |
517 | perq = tempbuff[0]; | |
518 | modi = tempbuff[1]; | |
519 | if ((perq & 0x1f) == 0x1f) | |
520 | return -ENODEV; /* skip unknown devices */ | |
521 | if ((modi & 0x80) == 0x80) /* drive is removable */ | |
522 | dev_desc->removable = true; | |
523 | /* get info for this device */ | |
524 | scsi_ident_cpy((unsigned char *)dev_desc->vendor, | |
525 | &tempbuff[8], 8); | |
526 | scsi_ident_cpy((unsigned char *)dev_desc->product, | |
527 | &tempbuff[16], 16); | |
528 | scsi_ident_cpy((unsigned char *)dev_desc->revision, | |
529 | &tempbuff[32], 4); | |
530 | dev_desc->target = pccb->target; | |
531 | dev_desc->lun = pccb->lun; | |
532 | ||
533 | pccb->datalen = 0; | |
534 | scsi_setup_test_unit_ready(pccb); | |
535 | if (scsi_exec(pccb) != true) { | |
536 | if (dev_desc->removable) { | |
537 | dev_desc->type = perq; | |
538 | goto removable; | |
539 | } | |
540 | scsi_print_error(pccb); | |
541 | return -EINVAL; | |
542 | } | |
543 | if (scsi_read_capacity(pccb, &capacity, &blksz)) { | |
544 | scsi_print_error(pccb); | |
545 | return -EINVAL; | |
546 | } | |
547 | dev_desc->lba = capacity; | |
548 | dev_desc->blksz = blksz; | |
549 | dev_desc->log2blksz = LOG2(dev_desc->blksz); | |
550 | dev_desc->type = perq; | |
551 | part_init(&dev_desc[0]); | |
552 | removable: | |
553 | return 0; | |
554 | } | |
555 | ||
11f610ed SG |
556 | /* |
557 | * (re)-scan the scsi bus and reports scsi device info | |
558 | * to the user if mode = 1 | |
559 | */ | |
560 | void scsi_scan(int mode) | |
561 | { | |
570712f4 MS |
562 | unsigned char i, lun; |
563 | int ret; | |
11f610ed SG |
564 | ccb *pccb = (ccb *)&tempccb; |
565 | ||
566 | if (mode == 1) | |
567 | printf("scanning bus for devices...\n"); | |
92ca476c MS |
568 | for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++) |
569 | scsi_init_dev_desc(&scsi_dev_desc[i], i); | |
570 | ||
11f610ed SG |
571 | scsi_max_devs = 0; |
572 | for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { | |
573 | pccb->target = i; | |
574 | for (lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) { | |
4dbee176 | 575 | scsi_dev_desc[scsi_max_devs].lun = lun; |
570712f4 | 576 | ret = scsi_detect_dev(pccb, |
4dbee176 | 577 | &scsi_dev_desc[scsi_max_devs]); |
570712f4 | 578 | if (ret) |
11f610ed | 579 | continue; |
570712f4 | 580 | |
11f610ed | 581 | if (mode == 1) { |
570712f4 | 582 | printf(" Device %d: ", 0); |
11f610ed SG |
583 | dev_print(&scsi_dev_desc[scsi_max_devs]); |
584 | } /* if mode */ | |
585 | scsi_max_devs++; | |
586 | } /* next LUN */ | |
587 | } | |
588 | if (scsi_max_devs > 0) | |
589 | scsi_curr_dev = 0; | |
590 | else | |
591 | scsi_curr_dev = -1; | |
592 | ||
593 | printf("Found %d device(s).\n", scsi_max_devs); | |
594 | #ifndef CONFIG_SPL_BUILD | |
595 | setenv_ulong("scsidevs", scsi_max_devs); | |
596 | #endif | |
597 | } | |
598 | ||
535556b2 SG |
599 | #ifdef CONFIG_BLK |
600 | static const struct blk_ops scsi_blk_ops = { | |
601 | .read = scsi_read, | |
602 | .write = scsi_write, | |
603 | }; | |
604 | ||
605 | U_BOOT_DRIVER(scsi_blk) = { | |
606 | .name = "scsi_blk", | |
607 | .id = UCLASS_BLK, | |
608 | .ops = &scsi_blk_ops, | |
609 | }; | |
610 | #else | |
11f610ed | 611 | U_BOOT_LEGACY_BLK(scsi) = { |
69c125fe | 612 | .if_typename = "scsi", |
11f610ed SG |
613 | .if_type = IF_TYPE_SCSI, |
614 | .max_devs = CONFIG_SYS_SCSI_MAX_DEVICE, | |
615 | .desc = scsi_dev_desc, | |
616 | }; | |
535556b2 | 617 | #endif |