sunxi: define SYS_MONITOR_LEN in Kconfig, not _defconfig

[thirdparty/u-boot.git] / configs / omap3_logic_defconfig

CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TEXT_BASE=0x80100000
CONFIG_SYS_MALLOC_F_LEN=0x3000
CONFIG_TI_COMMON_CMD_OPTIONS=y
# CONFIG_SPL_GPIO is not set
CONFIG_NR_DRAM_BANKS=2
CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit"
CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
CONFIG_SYS_PROMPT="OMAP Logic # "
CONFIG_SPL=y
CONFIG_LTO=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_SYS_MONITOR_LEN=262144
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_BOOTCOMMAND="run autoboot"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="setenv preboot;saveenv;"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SYS_SPL_MALLOC=y
CONFIG_SYS_SPL_MALLOC_SIZE=0x800000
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
# CONFIG_SPL_FS_EXT4 is not set
# CONFIG_SPL_I2C is not set
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=1054
# CONFIG_CMD_IMI is not set
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x240000
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_UUID=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_DM=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_OMAP36XX_PINS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
CONFIG_SMC911X=y
CONFIG_SMC911X_32_BIT=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_OMAP is not set
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_OMAP2PLUS=y
CONFIG_TWL4030_USB=y
CONFIG_BCH=y