]> git.ipfire.org Git - people/ms/u-boot.git/blame - configs/popmetal-rk3288_defconfig
rk3288: config change for enable dram capacity auto-detect.
[people/ms/u-boot.git] / configs / popmetal-rk3288_defconfig
CommitLineData
dd63fbc7 1CONFIG_ARM=y
2CONFIG_ARCH_ROCKCHIP=y
3CONFIG_SYS_MALLOC_F_LEN=0x2000
4CONFIG_ROCKCHIP_RK3288=y
5CONFIG_TARGET_POPMETAL_RK3288=y
6CONFIG_SPL_STACK_R_ADDR=0x80000
7CONFIG_DEFAULT_DEVICE_TREE="rk3288-popmetal"
98af8799 8CONFIG_SILENT_CONSOLE=y
ef26d603
SG
9CONFIG_CONSOLE_MUX=y
10# CONFIG_DISPLAY_CPUINFO is not set
dd63fbc7 11CONFIG_SPL_STACK_R=y
12CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
13CONFIG_HUSH_PARSER=y
14CONFIG_CMD_BOOTZ=y
15# CONFIG_CMD_IMLS is not set
16CONFIG_CMD_MMC=y
17CONFIG_CMD_SF=y
18CONFIG_CMD_SPI=y
19CONFIG_CMD_I2C=y
20CONFIG_CMD_GPIO=y
21# CONFIG_CMD_SETEXPR is not set
22CONFIG_CMD_DHCP=y
23CONFIG_CMD_MII=y
24CONFIG_CMD_PING=y
25CONFIG_CMD_CACHE=y
26CONFIG_CMD_TIME=y
27CONFIG_CMD_PMIC=y
28CONFIG_CMD_REGULATOR=y
29CONFIG_CMD_EXT2=y
30CONFIG_CMD_EXT4=y
31CONFIG_CMD_FAT=y
32CONFIG_CMD_FS_GENERIC=y
33CONFIG_SPL_OF_CONTROL=y
34CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
35CONFIG_REGMAP=y
36CONFIG_SPL_REGMAP=y
37CONFIG_SYSCON=y
38CONFIG_SPL_SYSCON=y
39# CONFIG_SPL_SIMPLE_BUS is not set
40CONFIG_CLK=y
41CONFIG_SPL_CLK=y
42CONFIG_ROCKCHIP_GPIO=y
43CONFIG_SYS_I2C_ROCKCHIP=y
dd63fbc7 44CONFIG_ROCKCHIP_DWMMC=y
45CONFIG_PINCTRL=y
46CONFIG_SPL_PINCTRL=y
47# CONFIG_SPL_PINCTRL_FULL is not set
48CONFIG_ROCKCHIP_RK3288_PINCTRL=y
49CONFIG_DM_PMIC=y
50CONFIG_PMIC_RK808=y
dd63fbc7 51CONFIG_DM_REGULATOR_FIXED=y
aca5cd27 52CONFIG_REGULATOR_RK808=y
dd63fbc7 53CONFIG_PWM_ROCKCHIP=y
54CONFIG_RAM=y
55CONFIG_SPL_RAM=y
56CONFIG_DEBUG_UART=y
57CONFIG_DEBUG_UART_BASE=0xff690000
58CONFIG_DEBUG_UART_CLOCK=24000000
59CONFIG_DEBUG_UART_SHIFT=2
60CONFIG_SYS_NS16550=y
aca5cd27 61CONFIG_SYSRESET=y
dd63fbc7 62CONFIG_USE_TINY_PRINTF=y
63CONFIG_CMD_DHRYSTONE=y
64CONFIG_ERRNO_STR=y
cd2f6b8b 65CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y