]>
Commit | Line | Data |
---|---|---|
109fa1d0 | 1 | AC_INIT([DHCP],[4.4.2],[dhcp-users@isc.org]) |
13e5cc6c FD |
2 | |
3 | @BEGIN WITH LIBTOOL | |
4 | # for libtool | |
5 | AC_CONFIG_MACRO_DIR([m4]) | |
6 | @END WITH LIBTOOL | |
7 | ||
8 | # we specify "foreign" to avoid having to have the GNU mandated files, | |
9 | # like AUTHORS, COPYING, and such | |
bf6f8fce | 10 | AM_INIT_AUTOMAKE([foreign]) |
13e5cc6c FD |
11 | |
12 | # we specify AM_MAINTAINER_MODE to avoid problems with rebuilding | |
13 | # the configure and makefiles. Without it users doing things that | |
14 | # change the timestamps on the code, like checking it into a cvs | |
15 | # tree, could trigger a rebuild of the infrastructure files which | |
16 | # might fail if they don't have the correct tools. | |
17 | AM_MAINTAINER_MODE | |
18 | ||
19 | AC_CANONICAL_HOST | |
20 | ||
21 | # We want to turn on warnings if we are using gcc and the user did | |
22 | # not specify CFLAGS. The autoconf check for the C compiler sets the | |
23 | # CFLAGS if gcc is used, so we will save it before we run that check. | |
24 | SAVE_CFLAGS="$CFLAGS" | |
25 | ||
26 | # Now find our C compiler. | |
27 | AC_PROG_CC | |
28 | ||
29 | # Suppress warnings about --datarootdir | |
30 | AC_DEFUN([AC_DATAROOTDIR_CHECKED]) | |
31 | ||
32 | # If we have gcc, and AC_PROG_CC changed the flags, then we know the | |
33 | # user did not specify any flags. Add warnings in this case. | |
34 | if test "$GCC" = "yes"; then | |
35 | if test "$CFLAGS" != "$SAVE_CFLAGS"; then | |
36 | STD_CWARNINGS="$STD_CWARNINGS -Wall -Werror -fno-strict-aliasing" | |
37 | fi | |
38 | fi | |
39 | ||
40 | # We can have some flags to pass to bind configure | |
41 | BINDCONFIG= | |
42 | if test "$cross_compiling" = "yes"; then | |
43 | BINDCONFIG="--host=$host" | |
44 | fi | |
45 | # Pass CFLAGS and co. $ac_configure_args looks like "'arg1' 'arg2' ..." | |
46 | # and as there can be a space inside an argument some magic is required. | |
47 | # This sets $1 ... $N to my_configure_args, arg1 ... argN | |
48 | eval "set my_configure_args $ac_configure_args" | |
49 | # remove my_configure_args, i.e., the guard against empty $ac_configure_args | |
50 | shift | |
51 | # iterate on arguments and copying 'arg' when it begins by an upper case | |
52 | for a | |
53 | do | |
54 | case $a in | |
55 | [[A-Z]]*) BINDCONFIG="$BINDCONFIG '$a'" ;; | |
56 | esac | |
57 | done | |
58 | AC_SUBST(BINDCONFIG) | |
59 | ||
60 | # POSIX doesn't include the IPv6 Advanced Socket API and glibc hides | |
61 | # parts of the IPv6 Advanced Socket API as a result. This is stupid | |
62 | # as it breaks how the two halves (Basic and Advanced) of the IPv6 | |
63 | # Socket API were designed to be used but we have to live with it. | |
64 | # Use this to define _GNU_SOURCE to pull in the IPv6 Advanced Socket API. | |
65 | AC_USE_SYSTEM_EXTENSIONS | |
66 | ||
d113bc2c | 67 | @BEGIN WITHOUT LIBTOOL |
13e5cc6c | 68 | AC_PROG_RANLIB |
d113bc2c | 69 | @END WITHOUT LIBTOOL |
13e5cc6c FD |
70 | |
71 | AC_PATH_PROG(AR, ar) | |
72 | AC_SUBST(AR) | |
73 | ||
74 | if test "X$AR" = "X"; then | |
75 | AC_MSG_ERROR([ | |
76 | ar program not found. Please fix your PATH to include the directory in | |
77 | which ar resides, or set AR in the environment with the full path to ar.]) | |
78 | fi | |
79 | ||
80 | AC_CONFIG_HEADERS([includes/config.h]) | |
81 | ||
82 | # we sometimes need to know byte order for building packets | |
83 | AC_C_BIGENDIAN(AC_SUBST(byte_order, BIG_ENDIAN), | |
84 | AC_SUBST(byte_order, LITTLE_ENDIAN)) | |
85 | AC_DEFINE_UNQUOTED([DHCP_BYTE_ORDER], [$byte_order], | |
86 | [Define to BIG_ENDIAN for MSB (Motorola or SPARC CPUs) | |
87 | or LITTLE_ENDIAN for LSB (Intel CPUs).]) | |
88 | ||
89 | # Optional compile-time DEBUGging. | |
90 | AC_ARG_ENABLE(debug, | |
91 | AS_HELP_STRING([--enable-debug],[create a debug-only version of the software (default is no).]), | |
92 | [case "${enableval}" in | |
93 | yes) enable_debug=yes | |
94 | AC_DEFINE([DEBUG], [1], | |
95 | [Define to compile debug-only DHCP software.]) | |
96 | # Just override CFLAGS totally to remove optimization. | |
97 | CFLAGS="-g";; | |
98 | no) enable_debug=no ;; | |
99 | *) AC_MSG_ERROR([bad value ${enableval} for --enable-debug]) ;; | |
100 | esac],[enable_debug=no]) | |
101 | ||
102 | # XXX: there are actually quite a lot more DEBUG_ features we could enable, | |
103 | # but I don't want to pollute the --help space. | |
104 | # | |
105 | #/* #define DEBUG_TOKENS */ | |
106 | #/* #define DEBUG_PACKET */ | |
107 | #/* #define DEBUG_EXPRESSIONS */ | |
108 | #/* #define DEBUG_FIND_LEASE */ | |
109 | #/* #define DEBUG_EXPRESSION_PARSE */ | |
110 | #/* #define DEBUG_CLASS_MATCHING */ | |
111 | #/* #define DEBUG_MEMORY_LEAKAGE */ | |
112 | #/* #define DEBUG_MALLOC_POOL */ | |
113 | #/* #define DEBUG_LEASE_STATE_TRANSITIONS */ | |
114 | #/* #define DEBUG_RC_HISTORY */ | |
115 | #/* #define DEBUG_RC_HISTORY_EXHAUSTIVELY */ | |
116 | #/* #define RC_HISTORY_MAX 10240 */ | |
117 | #/* #define POINTER_DEBUG */ | |
118 | #/* #define DEBUG_FAILOVER_MESSAGES */ | |
119 | #/* #define DEBUG_FAILOVER_TIMING */ | |
120 | #/* #define DEBUG_DUMP_ALL_LEASES */ | |
121 | ||
122 | # Failover optional compile-time feature. | |
123 | AC_ARG_ENABLE(failover, | |
124 | AS_HELP_STRING([--enable-failover],[enable support for failover (default is yes)])) | |
125 | # Failover is on by default, so define if it is not explicitly disabled. | |
126 | if test "$enable_failover" != "no"; then | |
127 | enable_failover="yes" | |
128 | AC_DEFINE([FAILOVER_PROTOCOL], [1], | |
129 | [Define to include Failover Protocol support.]) | |
130 | fi | |
131 | ||
132 | # execute() support. | |
133 | AC_ARG_ENABLE(execute, | |
134 | AS_HELP_STRING([--enable-execute],[enable support for execute() in config (default is yes)])) | |
135 | # execute() is on by default, so define if it is not explicitly disabled. | |
136 | if test "$enable_execute" != "no" ; then | |
137 | enable_execute="yes" | |
138 | AC_DEFINE([ENABLE_EXECUTE], [1], | |
139 | [Define to include execute() config language support.]) | |
140 | fi | |
141 | ||
142 | # Server tracing support. | |
143 | AC_ARG_ENABLE(tracing, | |
144 | AS_HELP_STRING([--enable-tracing],[enable support for server activity tracing (default is yes)])) | |
145 | # tracing is on by default, so define if it is not explicitly disabled. | |
146 | if test "$enable_tracing" != "no" ; then | |
147 | AC_DEFINE([TRACING], [1], | |
148 | [Define to include server activity tracing support.]) | |
149 | fi | |
150 | ||
4406f9b0 | 151 | # Delayed-ack feature support. |
13e5cc6c | 152 | AC_ARG_ENABLE(delayed_ack, |
4406f9b0 TM |
153 | AS_HELP_STRING([--enable-delayed-ack],[queues multiple DHCPACK replies (default is yes)])) |
154 | if test "$enable_delayed_ack" != "no"; then | |
155 | enable_delayed_ack="yes" | |
13e5cc6c FD |
156 | AC_DEFINE([DELAYED_ACK], [1], |
157 | [Define to queue multiple DHCPACK replies per fsync.]) | |
13e5cc6c FD |
158 | fi |
159 | ||
160 | # DHCPv6 optional compile-time feature. | |
161 | AC_ARG_ENABLE(dhcpv6, | |
162 | AS_HELP_STRING([--enable-dhcpv6],[enable support for DHCPv6 (default is yes)])) | |
163 | # DHCPv6 is on by default, so define if it is not explicitly disabled. | |
164 | if test "$enable_dhcpv6" != "no"; then | |
165 | enable_dhcpv6="yes" | |
166 | AC_DEFINE([DHCPv6], [1], | |
167 | [Define to 1 to include DHCPv6 support.]) | |
168 | fi | |
169 | ||
170 | # DHCPv4o6 optional compile-time feature. | |
171 | AC_ARG_ENABLE(dhcpv4o6, | |
172 | AS_HELP_STRING([--enable-dhcpv4o6],[enable support for DHCPv4-over-DHCPv6 (default is no)])) | |
173 | # DHCPv4o6 is off by default, so define if it is explicitly enabled. | |
174 | if test "$enable_dhcpv4o6" = "yes"; then | |
175 | # DHCPv4o6 requires DHCPv6 | |
176 | if test "$enable_dhcpv6" = "no"; then | |
177 | AC_MSG_ERROR([dhcpv4o6 requires dhcpv6]) | |
178 | fi | |
13e5cc6c FD |
179 | AC_DEFINE([DHCP4o6], [1], |
180 | [Define to 1 to include DHCPv4 over DHCPv6 support.]) | |
4406f9b0 TM |
181 | else |
182 | # so we can report below | |
183 | enable_dhcpv4o6="no" | |
13e5cc6c FD |
184 | fi |
185 | ||
563f0b8a FD |
186 | # Relay port (draft-ietf-dhc-relay-port-10.txt) optional compile-time feature. |
187 | AC_ARG_ENABLE(relay-port, | |
188 | AS_HELP_STRING([--enable-relay-port],[enable support for relay port (default is no)])) | |
189 | # Relay port is off by default (for now) | |
190 | if test "$enable_relay_port" = "yes"; then | |
191 | AC_DEFINE([RELAY_PORT], [1], | |
192 | [Define to 1 to include relay port support.]) | |
2f1fd274 | 193 | else |
66248390 | 194 | # so we can report below |
e985472a | 195 | enable_relay_port="no" |
563f0b8a FD |
196 | fi |
197 | ||
13e5cc6c FD |
198 | # PARANOIA is off by default (until we can test it with all features) |
199 | AC_ARG_ENABLE(paranoia, | |
200 | AS_HELP_STRING([--enable-paranoia],[enable support for chroot/setuid (default is no)])) | |
201 | AC_ARG_ENABLE(early_chroot, | |
202 | AS_HELP_STRING([--enable-early-chroot],[enable chrooting prior to configuration (default is no)])) | |
203 | # If someone enables early chroot, but does not enable paranoia, do so for | |
204 | # them. | |
205 | if test "$enable_paranoia" != "yes" && \ | |
206 | test "$enable_early_chroot" = "yes" ; then | |
207 | enable_paranoia="yes" | |
208 | fi | |
209 | ||
210 | if test "$enable_paranoia" = "yes" ; then | |
211 | AC_DEFINE([PARANOIA], [1], | |
212 | [Define to any value to include Ari's PARANOIA patch.]) | |
213 | fi | |
214 | if test "$enable_early_chroot" = "yes" ; then | |
215 | AC_DEFINE([EARLY_CHROOT], [1], | |
216 | [Define to any value to chroot() prior to loading config.]) | |
217 | fi | |
218 | ||
219 | AC_ARG_ENABLE(ipv4_pktinfo, | |
220 | AS_HELP_STRING([--enable-ipv4-pktinfo],[enable use of pktinfo on IPv4 sockets (default is no)])) | |
221 | ||
222 | if test "$enable_ipv4_pktinfo" = "yes"; then | |
223 | AC_DEFINE([USE_V4_PKTINFO], [1], | |
224 | [Define to 1 to enable IPv4 packet info support.]) | |
225 | fi | |
226 | ||
227 | AC_ARG_ENABLE(use_sockets, | |
228 | AS_HELP_STRING([--enable-use-sockets],[use the standard BSD socket API (default is no)])) | |
229 | ||
230 | if test "$enable_use_sockets" = "yes"; then | |
231 | AC_DEFINE([USE_SOCKETS], [1], | |
232 | [Define to 1 to use the standard BSD socket API.]) | |
233 | fi | |
234 | ||
13e5cc6c FD |
235 | # Include the PID in the log messages. This is useful when there may |
236 | # be multiple instances of a program. | |
237 | # This is off by default | |
238 | AC_ARG_ENABLE(log_pid, | |
239 | AS_HELP_STRING([--enable-log-pid],[Include PIDs in syslog messages (default is no).])) | |
240 | if test "$enable_log_pid" = "yes" ; then | |
241 | AC_DEFINE([USE_LOG_PID], [1], | |
242 | [Define to include PIDs in syslog messages.]) | |
243 | fi | |
244 | ||
245 | # Allow for binary search when inserting v4 leases into queues | |
246 | AC_ARG_ENABLE(binary_leases, | |
247 | AS_HELP_STRING([--enable-binary-leases],[enable support for binary insertion of leases (default is no)])) | |
248 | # binary_leases is off by default. | |
249 | if test "$enable_binary_leases" = "yes"; then | |
250 | AC_DEFINE([BINARY_LEASES], [1], | |
251 | [Define to support binary insertion of leases into queues.]) | |
252 | else | |
253 | enable_binary_leases="no" | |
254 | fi | |
255 | ||
256 | # Testing section | |
257 | ||
bfbe0fd6 | 258 | # Bind Makefile needs to know ATF is not included. |
9a2f9db5 | 259 | AM_CONDITIONAL(BIND_ATF, test "foo" = "barr") |
bfbe0fd6 | 260 | |
13e5cc6c FD |
261 | DISTCHECK_ATF_CONFIGURE_FLAG= |
262 | atf_path="no" | |
263 | AC_ARG_WITH([atf], | |
4adcee93 | 264 | AS_HELP_STRING([--with-atf=PATH],[specify location where atf was installed]), |
13e5cc6c | 265 | [atf_path="$withval"]) |
4adcee93 | 266 | if test "$atf_path" != "no" ; then |
13e5cc6c FD |
267 | DISTCHECK_ATF_CONFIGURE_FLAG="--with-atf=$atf_path" |
268 | # Config path for pkg-config | |
269 | atf_pcp="" | |
270 | if test "$atf_path" != "yes" ; then | |
271 | if test -f $atf_path/lib/pkgconfig/atf-c.pc ; then | |
272 | atf_pcp=$atf_path/lib/pkgconfig | |
273 | elif test -f $atf_path/lib64/pkgconfig/atf-c.pc ; then | |
274 | atf_pcp=$atf_path/lib64/pkgconfig | |
275 | fi | |
276 | else | |
277 | # Not specified, try some common paths | |
278 | atf_dirs="/usr /usr/local /usr/pkg /opt /opt/local" | |
279 | for d in $atf_dirs | |
280 | do | |
281 | if test -f $d/lib/pkgconfig/atf-c.pc ; then | |
282 | atf_pcp=$d/lib/pkgconfig | |
283 | atf_path=$d | |
284 | elif test -f $d/lib64/pkgconfig/atf-c.pc ; then | |
285 | atf_pcp=$d/lib64/pkgconfig | |
286 | atf_path=$d | |
287 | fi | |
288 | done | |
289 | fi | |
290 | ||
291 | if test "$atf_pcp" = "" ; then | |
292 | AC_MSG_ERROR([Unable to find atf files in location specified]) | |
293 | else | |
294 | AC_CHECK_PROG([pkgcfg_found],[pkg-config],[pkg-config],[]) | |
295 | if test "$pkgcfg_found" = ""; then | |
296 | AC_MSG_ERROR([Could not locate ATF, pkg-config not installed]) | |
297 | fi | |
298 | ATF_CFLAGS="`PKG_CONFIG_PATH=$atf_pcp pkg-config --cflags atf-c` -DUNIT_TEST" | |
299 | ATF_LDFLAGS="`PKG_CONFIG_PATH=$atf_pcp pkg-config --libs atf-c`" | |
300 | if test -f $atf_pcp/atf-sh.pc ; then | |
301 | ATF_BIN="`PKG_CONFIG_PATH=$atf_pcp pkg-config --variable=exec_prefix atf-sh`/bin" | |
302 | else | |
303 | # older versions don't have atf-sh, try usual place | |
304 | ATF_BIN=$atf_path/bin | |
305 | fi | |
306 | ||
6b87c7f2 | 307 | UNITTESTS=tests |
13e5cc6c FD |
308 | |
309 | AC_SUBST(ATF_CFLAGS) | |
310 | AC_SUBST(ATF_LDFLAGS) | |
311 | AC_SUBST(ATF_BIN) | |
6b87c7f2 | 312 | AC_SUBST(UNITTESTS) |
13e5cc6c FD |
313 | fi |
314 | fi | |
315 | ||
316 | AM_CONDITIONAL(HAVE_ATF, test "$atf_pcp" != "") | |
317 | AM_COND_IF([HAVE_ATF], [AC_DEFINE([HAVE_ATF], [1], [ATF framework specified?])]) | |
318 | AC_SUBST(DISTCHECK_ATF_CONFIGURE_FLAG) | |
319 | ||
320 | ### | |
321 | ### Path fun. Older versions of DHCP were installed in /usr/sbin, so we | |
322 | ### need to look there and potentially overwrite by default (but not if | |
323 | ### the user configures an alternate value). LOCALSTATEDIR is totally | |
324 | ### braindead. No one uses /usr/local/var/db/ nor /usr/local/var/run, and | |
325 | ### they would be insane for suggesting it. We need to look in /var/for | |
326 | ### 'db' and 'state/dhcp' for db files, and /var/run for pid files by | |
327 | ### default. | |
328 | ### | |
329 | AC_PREFIX_PROGRAM(dhcpd) | |
330 | ||
331 | # XXX - isn't there SOME WAY to default autoconf to /var instead of | |
332 | # /usr/local/var/no/one/has/this/please/stop/trying? | |
333 | case "$localstatedir" in | |
334 | '${prefix}/var') | |
335 | localstatedir=/var | |
336 | ;; | |
337 | esac | |
338 | ||
c8f0b32a MS |
339 | # Default server configuration file. |
340 | AC_ARG_WITH(srv-conf-file, | |
341 | AS_HELP_STRING([--with-srv-conf-file=PATH],[Default file containing dhcpd configuration | |
342 | (default is typically /etc/dhcpd.conf)]), | |
343 | AC_DEFINE_UNQUOTED([_PATH_DHCPD_CONF], ["$withval"], | |
344 | [Default file containing dhcpd configuration.])) | |
345 | ||
13e5cc6c FD |
346 | # Allow specification of alternate state files |
347 | AC_ARG_WITH(srv-lease-file, | |
348 | AS_HELP_STRING([--with-srv-lease-file=PATH],[File for dhcpd leases | |
349 | (default is LOCALSTATEDIR/db/dhcpd.leases)]), | |
350 | AC_DEFINE_UNQUOTED([_PATH_DHCPD_DB], ["$withval"], | |
351 | [File for dhcpd leases.])) | |
352 | ||
353 | AC_MSG_CHECKING([for dhcpd.leases location]) | |
354 | if [[ "x$with_srv_lease_file" = "x" ]] ; then | |
355 | if [[ -d "${localstatedir}/db" ]] ; then | |
356 | with_srv_lease_file="${localstatedir}/db/dhcpd.leases" | |
357 | elif [[ -d "${localstatedir}/state" ]] ; then | |
358 | if [[ -d "${localstatedir}/state/dhcp" ]] ; then | |
359 | with_srv_lease_file="${localstatedir}/state/dhcp/dhcpd.leases" | |
360 | else | |
361 | with_srv_lease_file="${localstatedir}/state/dhcpd.leases" | |
362 | fi | |
363 | elif [[ -d "${localstatedir}/lib" ]] ; then | |
364 | if [[ -d "${localstatedir}/lib/dhcp" ]] ; then | |
365 | with_srv_lease_file="${localstatedir}/lib/dhcp/dhcpd.leases" | |
366 | else | |
367 | with_srv_lease_file="${localstatedir}/lib/dhcpd.leases" | |
368 | fi | |
369 | elif [[ -d "${localstatedir}/etc" ]] ; then | |
370 | with_srv_lease_file="${localstatedir}/etc/dhcpd.leases" | |
371 | else | |
372 | with_srv_lease_file="/etc/dhcpd.leases" | |
373 | fi | |
374 | fi | |
375 | AC_MSG_RESULT($with_srv_lease_file) | |
376 | ||
377 | AC_ARG_WITH(srv6-lease-file, | |
378 | AS_HELP_STRING([--with-srv6-lease-file=PATH],[File for dhcpd6 leases | |
379 | (default is LOCALSTATEDIR/db/dhcpd6.leases)]), | |
380 | AC_DEFINE_UNQUOTED([_PATH_DHCPD6_DB], ["$withval"], | |
381 | [File for dhcpd6 leases.])) | |
382 | ||
383 | AC_MSG_CHECKING([for dhcpd6.leases location]) | |
384 | if [[ "x$with_srv6_lease_file" = "x" ]] ; then | |
385 | if [[ -d "${localstatedir}/db" ]] ; then | |
386 | with_srv6_lease_file="${localstatedir}/db/dhcpd6.leases" | |
387 | elif [[ -d "${localstatedir}/state" ]] ; then | |
388 | if [[ -d "${localstatedir}/state/dhcp" ]] ; then | |
389 | with_srv6_lease_file="${localstatedir}/state/dhcp/dhcpd6.leases" | |
390 | else | |
391 | with_srv6_lease_file="${localstatedir}/state/dhcpd6.leases" | |
392 | fi | |
393 | elif [[ -d "${localstatedir}/lib" ]] ; then | |
394 | if [[ -d "${localstatedir}/lib/dhcp" ]] ; then | |
395 | with_srv6_lease_file="${localstatedir}/lib/dhcp/dhcpd6.leases" | |
396 | else | |
397 | with_srv6_lease_file="${localstatedir}/lib/dhcpd6.leases" | |
398 | fi | |
399 | elif [[ -d "${localstatedir}/etc" ]] ; then | |
400 | with_srv6_lease_file="${localstatedir}/etc/dhcpd6.leases" | |
401 | else | |
402 | with_srv6_lease_file="/etc/dhcpd6.leases" | |
403 | fi | |
404 | fi | |
405 | AC_MSG_RESULT($with_srv6_lease_file) | |
406 | ||
407 | AC_ARG_WITH(cli-lease-file, | |
408 | AS_HELP_STRING([--with-cli-lease-file=PATH],[File for dhclient leases | |
409 | (default is LOCALSTATEDIR/db/dhclient.leases)]), | |
410 | AC_DEFINE_UNQUOTED([_PATH_DHCLIENT_DB], ["$withval"], | |
411 | [File for dhclient leases.])) | |
412 | ||
413 | AC_MSG_CHECKING([for dhclient.leases location]) | |
414 | if [[ "x$with_cli_lease_file" = "x" ]] ; then | |
415 | if [[ -d "${localstatedir}/db" ]] ; then | |
416 | with_cli_lease_file="${localstatedir}/db/dhclient.leases" | |
417 | elif [[ -d "${localstatedir}/state" ]] ; then | |
418 | if [[ -d "${localstatedir}/state/dhcp" ]] ; then | |
419 | with_cli_lease_file="${localstatedir}/state/dhcp/dhclient.leases" | |
420 | else | |
421 | with_cli_lease_file="${localstatedir}/state/dhclient.leases" | |
422 | fi | |
423 | elif [[ -d "${localstatedir}/lib" ]] ; then | |
424 | if [[ -d "${localstatedir}/lib/dhcp" ]] ; then | |
425 | with_cli_lease_file="${localstatedir}/lib/dhcp/dhclient.leases" | |
426 | else | |
427 | with_cli_lease_file="${localstatedir}/lib/dhclient.leases" | |
428 | fi | |
429 | elif [[ -d "${localstatedir}/etc" ]] ; then | |
430 | with_cli_lease_file="${localstatedir}/etc/dhclient.leases" | |
431 | else | |
432 | with_cli_lease_file="/etc/dhclient.leases" | |
433 | fi | |
434 | fi | |
435 | AC_MSG_RESULT($with_cli_lease_file) | |
436 | ||
437 | AC_ARG_WITH(cli6-lease-file, | |
438 | AS_HELP_STRING([--with-cli6-lease-file=PATH],[File for dhclient6 leases | |
439 | (default is LOCALSTATEDIR/db/dhclient6.leases)]), | |
440 | AC_DEFINE_UNQUOTED([_PATH_DHCLIENT6_DB], ["$withval"], | |
441 | [File for dhclient6 leases.])) | |
442 | ||
443 | AC_MSG_CHECKING([for dhclient6.leases location]) | |
444 | if [[ "x$with_cli6_lease_file" = "x" ]] ; then | |
445 | if [[ -d "${localstatedir}/db" ]] ; then | |
446 | with_cli6_lease_file="${localstatedir}/db/dhclient6.leases" | |
447 | elif [[ -d "${localstatedir}/state" ]] ; then | |
448 | if [[ -d "${localstatedir}/state/dhcp" ]] ; then | |
449 | with_cli6_lease_file="${localstatedir}/state/dhcp/dhclient6.leases" | |
450 | else | |
451 | with_cli6_lease_file="${localstatedir}/state/dhclient6.leases" | |
452 | fi | |
453 | elif [[ -d "${localstatedir}/lib" ]] ; then | |
454 | if [[ -d "${localstatedir}/lib/dhcp" ]] ; then | |
455 | with_cli6_lease_file="${localstatedir}/lib/dhcp/dhclient6.leases" | |
456 | else | |
457 | with_cli6_lease_file="${localstatedir}/lib/dhclient6.leases" | |
458 | fi | |
459 | elif [[ -d "${localstatedir}/etc" ]] ; then | |
460 | with_cli6_lease_file="${localstatedir}/etc/dhclient6.leases" | |
461 | else | |
462 | with_cli6_lease_file="/etc/dhclient6.leases" | |
463 | fi | |
464 | fi | |
465 | AC_MSG_RESULT($with_cli6_lease_file) | |
466 | ||
467 | AC_ARG_WITH(srv-pid-file, | |
468 | AS_HELP_STRING([--with-srv-pid-file=PATH],[File for dhcpd process information | |
469 | (default is LOCALSTATEDIR/run/dhcpd.pid)]), | |
470 | AC_DEFINE_UNQUOTED([_PATH_DHCPD_PID], ["$withval"], | |
471 | [File for dhcpd process information.])) | |
472 | AC_ARG_WITH(srv6-pid-file, | |
473 | AS_HELP_STRING([--with-srv6-pid-file=PATH],[File for dhcpd6 process information | |
474 | (default is LOCALSTATEDIR/run/dhcpd6.pid)]), | |
475 | AC_DEFINE_UNQUOTED([_PATH_DHCPD6_PID], ["$withval"], | |
476 | [File for dhcpd6 process information.])) | |
477 | AC_ARG_WITH(cli-pid-file, | |
478 | AS_HELP_STRING([--with-cli-pid-file=PATH],[File for dhclient process information | |
479 | (default is LOCALSTATEDIR/run/dhclient.pid)]), | |
480 | AC_DEFINE_UNQUOTED([_PATH_DHCLIENT_PID], ["$withval"], | |
481 | [File for dhclient process information.])) | |
482 | AC_ARG_WITH(cli6-pid-file, | |
483 | AS_HELP_STRING([--with-cli6-pid-file=PATH],[File for dhclient6 process information | |
484 | (default is LOCALSTATEDIR/run/dhclient6.pid)]), | |
485 | AC_DEFINE_UNQUOTED([_PATH_DHCLIENT6_PID], ["$withval"], | |
486 | [File for dhclient6 process information.])) | |
487 | AC_ARG_WITH(relay-pid-file, | |
488 | AS_HELP_STRING([--with-relay-pid-file=PATH],[File for dhcrelay process information | |
489 | (default is LOCALSTATEDIR/run/dhcrelay.pid)]), | |
490 | AC_DEFINE_UNQUOTED([_PATH_DHCRELAY_PID], ["$withval"], | |
491 | [File for dhcrelay process information.])) | |
492 | AC_ARG_WITH(relay6-pid-file, | |
493 | AS_HELP_STRING([--with-relay6-pid-file=PATH],[File for dhcrelay6 process information | |
494 | (default is LOCALSTATEDIR/run/dhcrelay6.pid)]), | |
495 | AC_DEFINE_UNQUOTED([_PATH_DHCRELAY6_PID], ["$withval"], | |
496 | [File for dhcrelay6 process information.])) | |
497 | ||
498 | # Check basic types. | |
499 | AC_TYPE_INT8_T | |
500 | AC_TYPE_INT16_T | |
501 | AC_TYPE_INT32_T | |
502 | AC_TYPE_INT64_T | |
503 | ||
504 | # Some systems need the u_intX_t types defined across. | |
505 | AC_CHECK_TYPE([u_int8_t], [], [ | |
506 | AC_TYPE_UINT8_T | |
507 | AC_DEFINE(u_int8_t, [uint8_t], [Define a type for 8-bit unsigned | |
508 | integers.]) | |
509 | ]) | |
510 | AC_CHECK_TYPE([u_int16_t], [], [ | |
511 | AC_TYPE_UINT16_T | |
512 | AC_DEFINE(u_int16_t, [uint16_t], [Define a type for 16-bit unsigned | |
513 | integers.]) | |
514 | ]) | |
515 | AC_CHECK_TYPE([u_int32_t], [], [ | |
516 | AC_TYPE_UINT32_T | |
517 | AC_DEFINE(u_int32_t, [uint32_t], [Define a type for 32-bit unsigned | |
518 | integers.]) | |
519 | ]) | |
520 | AC_CHECK_TYPE([u_int64_t], [], [ | |
521 | AC_TYPE_UINT64_T | |
522 | AC_DEFINE(u_int64_t, [uint64_t], [Define a type for 64-bit unsigned | |
523 | integers.]) | |
524 | ]) | |
525 | ||
526 | # see if ifaddrs.h is available | |
527 | AC_CHECK_HEADERS(ifaddrs.h) | |
528 | ||
529 | # figure out what IPv4 interface code to use | |
530 | AC_CHECK_HEADERS(linux/types.h) # needed for linux/filter.h on old systems | |
531 | ||
563f0b8a | 532 | relay_port_supported="no" |
13e5cc6c FD |
533 | AC_CHECK_HEADER(linux/filter.h, DO_LPF=1, , |
534 | [ | |
535 | #ifdef HAVE_LINUX_TYPES_H | |
536 | #include <linux/types.h> | |
537 | #endif | |
538 | ]) | |
539 | if test -n "$DO_LPF" | |
540 | then | |
541 | AC_DEFINE([HAVE_LPF], [1], | |
542 | [Define to 1 to use the Linux Packet Filter interface code.]) | |
563f0b8a | 543 | relay_port_supported="yes" |
13e5cc6c FD |
544 | else |
545 | AC_CHECK_HEADER(sys/dlpi.h, DO_DLPI=1) | |
546 | if test -n "$DO_DLPI" | |
547 | then | |
548 | AC_DEFINE([HAVE_DLPI], [1], | |
549 | [Define to 1 to use DLPI interface code.]) | |
550 | else | |
551 | AC_CHECK_HEADER(net/bpf.h, DO_BPF=1) | |
552 | if test -n "$DO_BPF" | |
553 | then | |
554 | AC_DEFINE([HAVE_BPF], [1], | |
555 | [Define to 1 to use the | |
556 | Berkeley Packet Filter interface code.]) | |
563f0b8a | 557 | relay_port_supported="yes" |
13e5cc6c FD |
558 | fi |
559 | fi | |
560 | fi | |
561 | ||
563f0b8a FD |
562 | if test "$enable_relay_port" = "yes"; then |
563 | if test "$relay_port_supported" != "yes"; then | |
564 | AC_MSG_ERROR([--enable-relay-port requires BPF or LPF]) | |
565 | fi | |
566 | fi | |
567 | ||
13e5cc6c FD |
568 | # SIOCGLIFCONF uses some transport structures. Trick is not all platforms |
569 | # use the same structures. We like to use 'struct lifconf' and 'struct | |
570 | # lifreq', but we'll use these other structures if they're present. HPUX | |
571 | # does not define 'struct lifnum', but does use SIOCGLIFNUM - they use an | |
572 | # int value. | |
573 | # | |
574 | AC_MSG_CHECKING([for struct lifnum]) | |
575 | AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ #include <sys/types.h> | |
576 | #include <sys/socket.h> | |
577 | #include <net/if.h> | |
578 | ]], [[ struct lifnum a; | |
579 | ]])],[AC_MSG_RESULT(yes) | |
580 | AC_DEFINE([ISC_PLATFORM_HAVELIFNUM], [1], | |
581 | [Define to 1 if the system has 'struct lifnum'.])],[AC_MSG_RESULT(no)]) | |
582 | ||
583 | AC_MSG_CHECKING([for struct if_laddrconf]) | |
584 | AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ #include <sys/types.h> | |
585 | #include <net/if6.h> | |
586 | ]], [[ struct if_laddrconf a; | |
587 | ]])],[AC_MSG_RESULT(yes) | |
588 | AC_DEFINE([ISC_PLATFORM_HAVEIF_LADDRCONF], [1], | |
589 | [Define to 1 if the system has 'struct if_laddrconf'.])],[AC_MSG_RESULT(no)]) | |
590 | ||
591 | AC_MSG_CHECKING([for struct if_laddrreq]) | |
592 | AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <sys/types.h> | |
593 | #include <net/if6.h> | |
594 | ]], [[ struct if_laddrreq a; | |
595 | ]])],[AC_MSG_RESULT(yes) | |
596 | AC_DEFINE([ISC_PLATFORM_HAVEIF_LADDRREQ], [1], | |
597 | [Define to 1 if the system has 'struct if_laddrreq'.])],[AC_MSG_RESULT(no)]) | |
598 | ||
599 | # | |
600 | # check for GCC noreturn attribute | |
601 | # | |
602 | AC_MSG_CHECKING(for GCC noreturn attribute) | |
603 | AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[void foo() __attribute__((noreturn));]])],[AC_MSG_RESULT(yes) | |
604 | AC_DEFINE([ISC_DHCP_NORETURN], [__attribute__((noreturn))], | |
605 | [Define to the string for a noreturn attribute.])],[AC_MSG_RESULT(no) | |
606 | AC_DEFINE([ISC_DHCP_NORETURN], [], | |
607 | [Define to the string for a noreturn attribute.])]) | |
608 | ||
609 | # Look for optional headers. | |
610 | AC_CHECK_HEADERS(sys/socket.h net/if_dl.h net/if6.h regex.h) | |
611 | ||
612 | # Solaris needs some libraries for functions | |
613 | AC_SEARCH_LIBS(socket, [socket]) | |
614 | AC_SEARCH_LIBS(inet_ntoa, [nsl]) | |
615 | ||
616 | AC_SEARCH_LIBS(inet_aton, [socket nsl], , | |
617 | AC_DEFINE([NEED_INET_ATON], [1], | |
618 | [Define to 1 if the inet_aton() function is missing.])) | |
619 | ||
620 | # Check for a standalone regex library. | |
621 | AC_SEARCH_LIBS(regcomp, [regex]) | |
622 | ||
623 | AC_CHECK_FUNCS(strlcat) | |
624 | ||
625 | # For HP/UX we need -lipv6 for if_nametoindex, perhaps others. | |
626 | AC_SEARCH_LIBS(if_nametoindex, [ipv6]) | |
627 | ||
bf0b1863 FD |
628 | # For some Solaris nanosleep is found by BIND in librt |
629 | have_nanosleep="no" | |
630 | AC_CHECK_FUNC(nanosleep, have_nanosleep="yes") | |
631 | if test "$have_nanosleep" = "no"; then | |
632 | AC_CHECK_LIB(rt, nanosleep, have_nanosleep="rt") | |
633 | fi | |
634 | if test "$have_nanosleep" = "rt"; then | |
635 | LIBS="-lrt $LIBS" | |
636 | fi | |
637 | ||
1cb76d2d | 638 | # check for /dev/random (declares ISC_PATH_RANDOMDEV) |
13e5cc6c FD |
639 | AC_MSG_CHECKING(for random device) |
640 | AC_ARG_WITH(randomdev, | |
641 | AS_HELP_STRING([--with-randomdev=PATH],[Path for random device | |
642 | (default is /dev/random)]), | |
643 | use_randomdev="$withval", use_randomdev="unspec") | |
644 | if test "$use_randomdev" = "unspec"; then | |
645 | if test "$cross_compiling" = "yes"; then | |
646 | AC_MSG_RESULT(unspecified) | |
647 | AC_MSG_ERROR([ need --with-randomdev=PATH or --with-randomdev=no]) | |
648 | fi | |
649 | use_randomdev="/dev/random" | |
650 | elif test "$use_randomdev" = "yes"; then | |
651 | use_randomdev="/dev/random" | |
652 | fi | |
653 | if test "$use_randomdev" = "no"; then | |
654 | AC_MSG_RESULT(disabled) | |
655 | BINDCONFIG="$BINDCONFIG --with-randomdev=no" | |
656 | else | |
657 | if test "$cross_compiling" = "yes"; then | |
658 | AC_MSG_RESULT($use_randomdev (unchecked)) | |
659 | else | |
660 | AC_MSG_RESULT($use_randomdev) | |
661 | AC_CHECK_FILE($use_randomdev, | |
d4fbfc55 | 662 | AC_DEFINE_UNQUOTED([ISC_PATH_RANDOMDEV], ["$use_randomdev"], |
1cb76d2d | 663 | [Define if you have the /dev/random or other configured file.]), |
13e5cc6c FD |
664 | AC_MSG_ERROR(cannot find $use_randomdev)) |
665 | fi | |
666 | BINDCONFIG="$BINDCONFIG --with-randomdev=$use_randomdev" | |
667 | fi | |
668 | ||
669 | BINDIOMUX="--disable-kqueue --disable-epoll --disable-devpoll" | |
670 | # check kqueue/epoll/devpoll alternative to select | |
671 | AC_ARG_ENABLE(kqueue, | |
672 | AS_HELP_STRING([--enable-kqueue],[use BSD kqueue (default is no)]), | |
673 | want_kqueue="$enableval", want_kqueue="no") | |
674 | if test "$want_kqueue" = "yes"; then | |
675 | BINDIOMUX="--enable-kqueue" | |
676 | AC_MSG_WARN([--enable-kqueue is not supported: it may lead to issues such as server looping]) | |
677 | fi | |
678 | AC_ARG_ENABLE(epoll, | |
679 | AS_HELP_STRING([--enable-epoll],[use Linux epoll (default is no)]), | |
680 | want_epoll="$enableval", want_epoll="no") | |
681 | if test "$want_epoll" = "yes"; then | |
682 | BINDIOMUX="--enable-epoll" | |
683 | AC_MSG_WARN([--enable-epoll is not supported: it may lead to issues such as server looping]) | |
684 | fi | |
685 | AC_ARG_ENABLE(devpoll, | |
686 | AS_HELP_STRING([--enable-devpoll],[use /dev/poll (default is no)]), | |
687 | want_devpoll="$enableval", want_devpoll="no") | |
688 | if test "$want_devpoll" = "yes"; then | |
689 | BINDIOMUX="--enable-devpoll" | |
690 | AC_MSG_WARN([--enable-devpoll is not supported: it may lead to issues such as server looping]) | |
691 | fi | |
692 | AC_SUBST(BINDIOMUX) | |
693 | ||
694 | # general extra bind configure arguments | |
695 | AC_ARG_WITH(bind-extra-config, | |
696 | AS_HELP_STRING([--with-bind-extra-config],[configure bind librairies | |
697 | with some extra options (default is none)]), | |
698 | use_xbindconfig="$withval", use_xbindconfig="") | |
699 | case "$use_xbindconfig" in | |
700 | yes|no|'') | |
701 | ;; | |
702 | *) | |
703 | BINDCONFIG="$BINDCONFIG $use_xbindconfig" | |
704 | AC_MSG_WARN([Most options to bind configure are not supported when used by ISC DHCP]) | |
705 | ;; | |
706 | esac | |
707 | ||
708 | # see if there is a "sa_len" field in our interface information structure | |
709 | AC_CHECK_MEMBER(struct sockaddr.sa_len, | |
710 | AC_DEFINE([HAVE_SA_LEN], [], | |
711 | [Define to 1 if the sockaddr structure has a length field.]), | |
712 | , | |
713 | [#include <sys/socket.h>]) | |
714 | ||
715 | # figure out pointer size | |
716 | SAVE_CFLAGS="$CFLAGS" | |
717 | CFLAGS="$CFLAGS -I$srcdir" | |
718 | AC_CHECK_SIZEOF(struct iaddr *, , [ | |
719 | #include "includes/inet.h" | |
720 | #include <stdio.h> | |
721 | ]) | |
722 | CFLAGS="$SAVE_CFLAGS" | |
723 | ||
724 | # Solaris does not have the msg_control or msg_controlen members | |
725 | # in the msghdr structure unless you define: | |
726 | # | |
727 | # _XOPEN_SOURCE, _XOPEN_SOURCE_EXTENDED, and __EXTENSIONS__ | |
728 | # | |
729 | # See the "standards" man page for details. | |
730 | # | |
731 | # We check for the msg_control member, and if it is not found, we check | |
732 | # again with the appropriate defines added to the CFLAGS. (In order to | |
733 | # do this we have to remove the check from the cache, which is what the | |
734 | # "unset" is for.) | |
735 | AC_CHECK_MEMBER(struct msghdr.msg_control,, | |
736 | [CFLAGS="$CFLAGS -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1" | |
737 | CFLAGS="$CFLAGS -D__EXTENSIONS__" | |
738 | unset ac_cv_member_struct_msghdr_msg_control | |
739 | AC_CHECK_MEMBER(struct msghdr.msg_control,, | |
740 | [AC_MSG_ERROR([Missing msg_control member in | |
741 | msg_control structure.])], | |
742 | [ | |
743 | #include <sys/types.h> | |
744 | #include <sys/socket.h> | |
745 | ]) | |
746 | ], | |
747 | [ | |
748 | #include <sys/types.h> | |
749 | #include <sys/socket.h> | |
750 | ]) | |
751 | ||
752 | AC_CHECK_MEMBER(struct tpacket_auxdata.tp_vlan_tci, | |
753 | [AC_DEFINE([VLAN_TCI_PRESENT], [1], [tpacket_auxdata.tp_vlan_tci present])] | |
754 | ,, [#include <linux/if_packet.h>]) | |
755 | ||
756 | # bind/Makefile.in is not from automake so we need 2 variables for bind dir | |
757 | BINDSUBDIR= | |
758 | BINDDIR= | |
759 | BINDSRCDIR= | |
760 | BINDLIBIRSDIR= | |
761 | BINDLIBDNSDIR= | |
762 | BINDLIBISCCFGDIR= | |
763 | BINDLIBISCDIR= | |
764 | DISTCHECK_LIBBIND_CONFIGURE_FLAG= | |
765 | AC_ARG_WITH(libbind, | |
766 | AS_HELP_STRING([--with-libbind=PATH],[bind includes and libraries are in PATH]), | |
767 | use_libbind="$withval", use_libbind="no") | |
768 | case "$use_libbind" in | |
769 | yes) | |
770 | AC_MSG_ERROR([PATH is required in --with-libbind=PATH]) | |
771 | ;; | |
772 | no) | |
773 | BINDSUBDIR="\${top_srcdir}/bind" | |
774 | my_abs_srcdir=`cd $srcdir && pwd` | |
775 | BINDDIR="${my_abs_srcdir}/bind" | |
776 | if test ! -d "$srcdir/bind"; then | |
777 | AC_MSG_ERROR([Where to find or build bind includes and libraries must be specified]) | |
778 | fi | |
779 | if test -d "$srcdir/bind/bind9"; then | |
780 | BINDSRCDIR="${my_abs_srcdir}/bind/bind9" | |
781 | else | |
782 | if test ! -f "$srcdir/bind/version.tmp"; then | |
783 | AC_MSG_ERROR([Cannot find $srcdir/bind/version.tmp]) | |
784 | fi | |
785 | . "$srcdir/bind/version.tmp" | |
786 | bindversion=${MAJORVER}.${MINORVER}.${PATCHVER}${RELEASETYPE}${RELEASEVER} | |
787 | BINDSRCDIR="${my_abs_srcdir}/bind/bind-$bindversion" | |
788 | fi | |
789 | AC_CONFIG_FILES([$srcdir/bind/Makefile]) | |
790 | ||
791 | BINDLIBIRSDIR="$BINDSRCDIR/lib/irs" | |
792 | BINDLIBDNSDIR="$BINDSRCDIR/lib/dns" | |
793 | BINDLIBISCCFGDIR="$BINDSRCDIR/lib/isccfg" | |
794 | BINDLIBISCDIR="$BINDSRCDIR/lib/isc" | |
795 | ;; | |
796 | *) | |
797 | if test ! -d "$use_libbind"; then | |
798 | AC_MSG_ERROR([Cannot find bind directory at $use_libbind]) | |
799 | fi | |
6d91a86b FD |
800 | if test ! -d "$use_libbind/include" -o \ |
801 | ! -f "$use_libbind/include/isc/buffer.h" | |
802 | then | |
13e5cc6c FD |
803 | AC_MSG_ERROR([Cannot find bind includes at $use_libbind/include]) |
804 | fi | |
6d91a86b FD |
805 | if test ! -d "$use_libbind/lib" -o \ |
806 | \( ! -f "$use_libbind/lib/libisc.a" -a \ | |
807 | ! -f "$use_libbind/lib/libisc.la" \) | |
808 | then | |
13e5cc6c FD |
809 | AC_MSG_ERROR([Cannot find bind libraries at $use_libbind/lib]) |
810 | fi | |
811 | BINDDIR="$use_libbind" | |
812 | BINDLIBIRSDIR="$BINDDIR/lib" | |
813 | BINDLIBDNSDIR="$BINDDIR/lib" | |
814 | BINDLIBISCCFGDIR="$BINDDIR/lib" | |
815 | BINDLIBISCDIR="$BINDDIR/lib" | |
816 | DISTCHECK_LIBBIND_CONFIGURE_FLAG="--with-libbind=$use_libbind" | |
817 | ;; | |
818 | esac | |
819 | AC_SUBST(BINDSUBDIR) | |
820 | AC_SUBST(BINDDIR) | |
821 | AC_SUBST(BINDSRCDIR) | |
822 | AC_SUBST(BINDLIBIRSDIR) | |
823 | AC_SUBST(BINDLIBDNSDIR) | |
824 | AC_SUBST(BINDLIBISCCFGDIR) | |
825 | AC_SUBST(BINDLIBISCDIR) | |
826 | AC_SUBST(DISTCHECK_LIBBIND_CONFIGURE_FLAG) | |
827 | AM_CONDITIONAL(HAVE_BINDDIR, test "$use_libbind" = "no") | |
828 | ||
13e5cc6c FD |
829 | # |
830 | # GNU libtool support | |
831 | # | |
832 | case "$build_os" in | |
833 | sunos*) | |
834 | # Just set the maximum command line length for sunos | |
835 | # as it otherwise takes a exceptionally long time to | |
836 | # work it out. Required for libtool. | |
837 | ||
838 | lt_cv_sys_max_cmd_len=4096 | |
839 | ;; | |
840 | esac | |
841 | ||
842 | want_libtool="no" | |
843 | @BEGIN WITH LIBTOOL | |
844 | LT_INIT | |
845 | want_libtool="yes" | |
846 | @END WITH LIBTOOL | |
847 | ||
848 | BINDLT= | |
bf6f8fce | 849 | DISTCHECK_LIBTOOL_CONFIGURE_FLAG= |
13e5cc6c | 850 | AC_ARG_ENABLE(libtool, |
6d91a86b FD |
851 | AS_HELP_STRING([--enable-libtool], |
852 | @BEGIN WITH LIBTOOL | |
853 | [use GNU libtool for dynamic shared libraries (default is yes).]), | |
854 | @END WITH LIBTOOL | |
855 | @BEGIN WITHOUT LIBTOOL | |
856 | [use GNU libtool for dynamic shared libraries (default is no).]), | |
857 | @END WITHOUT LIBTOOL | |
13e5cc6c | 858 | want_libtool="$enableval") |
d113bc2c | 859 | |
6d91a86b FD |
860 | if test "$use_libbind" != "no"; then |
861 | if test "$want_libtool" = "yes" -a \ | |
862 | ! -f "$use_libbind/lib/libisc.la" | |
863 | then | |
864 | AC_MSG_ERROR([Cannot find dynamic libraries at $use_libbind/lib]) | |
865 | fi | |
866 | if test "$want_libtool" = "no" -a \ | |
867 | ! -f "$use_libbind/lib/libisc.a" | |
868 | then | |
869 | AC_MSG_ERROR([Cannot find static libraries at $use_libbind/lib]) | |
870 | fi | |
871 | fi | |
872 | ||
13e5cc6c FD |
873 | @BEGIN WITH LIBTOOL |
874 | if test "$want_libtool" = "no"; then | |
875 | AC_MSG_ERROR([libtool configure is used but libtool is disabled?]) | |
876 | fi | |
d113bc2c FD |
877 | |
878 | DHLIBS=LTLIBRARIES | |
13e5cc6c | 879 | A=la |
bf6f8fce | 880 | BINDLT="--with-libtool --disable-symtable" |
36d4e51a | 881 | DISTCHECK_LIBTOOL_CONFIGURE_FLAG="--enable-libtool" |
13e5cc6c | 882 | @END WITH LIBTOOL |
d113bc2c | 883 | |
13e5cc6c FD |
884 | @BEGIN WITHOUT LIBTOOL |
885 | if test "$want_libtool" = "yes"; then | |
886 | AC_MSG_WARN([legacy configure is used but libtool is enabled. Trying to recover...]) | |
6d91a86b | 887 | # expand $ac_configure_args |
d113bc2c FD |
888 | eval "set my_configure_args $ac_configure_args" |
889 | shift | |
6d91a86b | 890 | cd $srcdir; exec ./config+lt "$@" |
13e5cc6c FD |
891 | AC_MSG_ERROR([Recovering failed]) |
892 | fi | |
d113bc2c FD |
893 | |
894 | DHLIBS=LIBRARIES | |
13e5cc6c FD |
895 | A=a |
896 | @END WITHOUT LIBTOOL | |
d113bc2c FD |
897 | |
898 | AC_SUBST(DHLIBS) | |
13e5cc6c FD |
899 | AC_SUBST(A) |
900 | AC_SUBST(BINDLT) | |
bf6f8fce FD |
901 | AC_SUBST(DISTCHECK_LIBTOOL_CONFIGURE_FLAG) |
902 | ||
903 | # quoting in Makefile.am.in | |
904 | Q=@ | |
905 | AC_SUBST(Q) | |
906 | ||
907 | # install bind includes and libraries | |
908 | ||
909 | want_install_bind="no" | |
910 | @BEGIN WITH LIBTOOL | |
911 | want_install_bind="yes" | |
912 | @END WITH LIBTOOL | |
913 | if test "$want_libtool" = "yes"; then | |
914 | want_install_bind="yes" | |
915 | fi | |
916 | if test "$use_libbind" != "no"; then | |
917 | want_install_bind="no" | |
918 | fi | |
919 | AC_ARG_ENABLE(bind_install, | |
6d91a86b FD |
920 | AS_HELP_STRING([--enable-bind-install], |
921 | @BEGIN WITH LIBTOOL | |
922 | [install bind includes and libraries.]), | |
923 | @END WITH LIBTOOL | |
924 | @BEGIN WITHOUT LIBTOOL | |
925 | [install bind includes and libraries (default is no).]), | |
926 | @END WITHOUT LIBTOOL | |
bf6f8fce FD |
927 | want_install_bind="$enableval") |
928 | if test "$want_install_bind" = "yes"; then | |
929 | if test "$use_libbind" != "no"; then | |
930 | AC_MSG_WARN([--enable-bind-install does nothing when --with-libbind is set]) | |
931 | fi | |
932 | elif test "$want_libtool" = "yes" -a "$use_libbind" = "no"; then | |
933 | AC_MSG_WARN([embedded dynamic bind libraries must be installed]) | |
934 | fi | |
935 | AM_CONDITIONAL(INSTALL_BIND, test "$want_install_bind" = "yes") | |
13e5cc6c FD |
936 | |
937 | # OpenLDAP support. | |
938 | AC_ARG_WITH(ldap, | |
939 | AS_HELP_STRING([--with-ldap],[enable OpenLDAP support in dhcpd (default is no)]), | |
940 | [ldap=$withval], | |
941 | [ldap=no]) | |
942 | ||
943 | # OpenLDAP with SSL support. | |
944 | AC_ARG_WITH(ldapcrypto, | |
945 | AS_HELP_STRING([--with-ldapcrypto],[enable OpenLDAP crypto support in dhcpd (default is no)]), | |
946 | [ldapcrypto=$withval], | |
947 | [ldapcrypto=no]) | |
948 | ||
949 | # Gssapi to allow LDAP to authenticate with a keytab | |
950 | AC_ARG_WITH(ldap-gssapi, | |
951 | AC_HELP_STRING([--with-ldap-gssapi], | |
952 | [enable krb5/gssapi authentication for OpenLDAP in dhcpd (default is no)]), | |
953 | [ldap_gssapi=$withval], | |
954 | [ldap_gssapi=no]) | |
955 | ||
956 | ||
957 | # LDAP CASA auth support. | |
958 | AC_ARG_WITH(ldapcasa, | |
959 | AC_HELP_STRING([--with-ldapcasa], | |
960 | [enable LDAP CASA auth support in dhcpd (default is no)]), | |
961 | [ldapcasa=$withval], | |
962 | [ldapcasa=no]) | |
963 | ||
964 | # OpenLDAP support is disabled by default, if enabled then SSL support is an | |
965 | # extra optional that is also disabled by default. Enabling LDAP SSL support | |
966 | # implies enabling LDAP support. Similarly, KRB5 support implies LDAP support, | |
967 | # but doesn't include SSL. The two are not dependant. | |
968 | if test x$ldap = xyes || test x$ldapcrypto = xyes || test x$ldap_gssapi = xyes; then | |
969 | saved_LIBS="$LIBS" | |
970 | LIBS="" | |
971 | AC_SEARCH_LIBS(ldap_initialize, [ldap], , | |
972 | AC_MSG_FAILURE([*** Cannot find ldap_initialize with -lldap - do you need to install an OpenLDAP2 Devel package?])) | |
973 | AC_SEARCH_LIBS(ber_pvt_opt_on, [lber], , | |
974 | AC_MSG_FAILURE([*** Cannot find ber_pvt_opt_on with -llber - do you need to install an OpenLDAP2 Devel package?])) | |
975 | if test x$ldap_gssapi = xyes ; then | |
976 | AC_SEARCH_LIBS(krb5_init_context, [krb5], , | |
977 | AC_MSG_FAILURE([*** Cannot find krb5_init_context with -lkrb5 - do you need to install a Kerberos Devel package?])) | |
978 | fi | |
979 | ||
980 | # Create LDAP_LIBS which we specify them explicitly rather than lumping them in with LIBS | |
981 | AC_SUBST(LDAP_LIBS, [$LIBS]) | |
982 | LIBS="$saved_LIBS" | |
983 | ||
984 | ||
985 | AC_CHECK_HEADERS([ldap.h]) | |
986 | AC_CHECK_FUNCS([inet_pton inet_ntop]) | |
987 | ||
988 | ||
989 | LDAP_CFLAGS="-DLDAP_CONFIGURATION" | |
990 | ||
991 | if test x$ldapcasa = xyes ; then | |
992 | AC_CHECK_HEADERS([micasa_mgmd.h],[ | |
993 | LDAP_CFLAGS="$LDAP_CFLAGS -DLDAP_CASA_AUTH" | |
994 | ], AC_MSG_FAILURE([*** Cannot find micasa_mgmd.h for ldap casa auth support])) | |
995 | fi | |
996 | ||
997 | if test x$ldapcrypto = xyes ; then | |
998 | LDAP_CFLAGS="$LDAP_CFLAGS -DLDAP_USE_SSL" | |
999 | fi | |
1000 | ||
1001 | if test x$ldap_gssapi = xyes; then | |
1002 | LDAP_CFLAGS="$LDAP_CFLAGS -DLDAP_USE_GSSAPI" | |
1003 | fi | |
1004 | ||
1005 | AC_SUBST(LDAP_CFLAGS, [$LDAP_CFLAGS]) | |
1006 | fi | |
1007 | ||
1008 | # Append selected warning levels to CFLAGS before substitution (but after | |
1009 | # AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[]])],[],[]) & etc). | |
1010 | CFLAGS="$CFLAGS $STD_CWARNINGS" | |
1011 | ||
1012 | # Try to add the bind and dhcp include directories | |
1013 | CFLAGS="$CFLAGS -I\$(top_srcdir)/includes -I$BINDDIR/include" | |
1014 | ||
1015 | case "$host" in | |
1016 | *-darwin*) | |
1017 | CFLAGS="$CFLAGS -D__APPLE_USE_RFC_3542";; | |
1018 | *-solaris*) | |
1019 | # As of Solaris 11, ethernet dev files are in /dev/net | |
1020 | AC_CHECK_FILE(/dev/net, | |
1021 | [AC_DEFINE([USE_DEV_NET], [1], | |
1022 | [Define to 1 if ethernet devices are in /dev/net])]) | |
1023 | ;; | |
1024 | esac | |
1025 | ||
1026 | AC_C_FLEXIBLE_ARRAY_MEMBER | |
1027 | ||
1028 | AC_CONFIG_FILES([ | |
1029 | Makefile | |
1030 | client/Makefile | |
1031 | client/tests/Makefile | |
1032 | common/Makefile.am | |
1033 | common/Makefile | |
1034 | common/tests/Makefile | |
1035 | dhcpctl/Makefile.am | |
1036 | dhcpctl/Makefile | |
1037 | includes/Makefile | |
0cd94b5e | 1038 | keama/Makefile |
13e5cc6c FD |
1039 | omapip/Makefile.am |
1040 | omapip/Makefile | |
1041 | relay/Makefile | |
0a2f9a62 | 1042 | relay/tests/Makefile |
13e5cc6c FD |
1043 | server/Makefile |
1044 | tests/Makefile.am | |
1045 | tests/Makefile | |
1046 | tests/unittest.sh | |
1047 | server/tests/Makefile | |
1048 | doc/devel/doxyfile | |
1049 | ]) | |
1050 | AC_OUTPUT | |
1051 | ||
1052 | @BEGIN WITH LIBTOOL | |
1053 | AC_MSG_NOTICE([postconfig: run automake in $srcdir]) | |
1054 | (cd $srcdir; automake) | |
1055 | AC_MSG_NOTICE([postconfig: rerun config.status]) | |
1056 | sh ./config.status | |
1057 | @END WITH LIBTOOL | |
1058 | ||
1059 | if test "$enable_dhcpv4o6" = "yes"; then | |
1060 | DHCP_VERSIONS="DHCPv4, DHCPv6 and DHCPv4-over-DHCPv6" | |
1061 | elif test "$enable_dhcpv6" != "no"; then | |
1062 | DHCP_VERSIONS="DHCPv4 and DHCPv6" | |
1063 | else | |
1064 | DHCP_VERSIONS="DHCPv4" | |
1065 | fi | |
1066 | ||
1067 | cat > config.report << END | |
1068 | ||
1069 | ISC DHCP source configure results: | |
1070 | -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- | |
1071 | ||
1072 | Package: | |
1073 | Name: $PACKAGE_NAME | |
1074 | Version: $PACKAGE_VERSION | |
1075 | ||
1076 | C Compiler: $CC | |
1077 | ||
1078 | Flags: | |
1079 | DEFS: $DEFS | |
1080 | CFLAGS: $CFLAGS | |
1081 | ||
1082 | DHCP versions: $DHCP_VERSIONS | |
1083 | ||
1084 | Features: | |
1085 | debug: $enable_debug | |
1086 | failover: $enable_failover | |
1087 | execute: $enable_execute | |
1088 | binary-leases: $enable_binary_leases | |
1089 | dhcpv6: $enable_dhcpv6 | |
1090 | delayed-ack: $enable_delayed_ack | |
4406f9b0 | 1091 | dhcpv4o6: $enable_dhcpv4o6 |
563f0b8a | 1092 | relay-port: $enable_relay_port |
13e5cc6c FD |
1093 | |
1094 | Developer: | |
1095 | ATF unittests : $atf_path | |
1096 | ||
1097 | END | |
1098 | # TODO: Add Perl system tests | |
1099 | ||
1100 | if test "$atf_path" != "no" | |
1101 | then | |
1102 | echo "ATF_CFLAGS : $ATF_CFLAGS" >> config.report | |
1103 | echo "ATF_LDFLAGS : $ATF_LDFLAGS" >> config.report | |
1104 | echo "ATF_BIN : $ATF_BIN" >> config.report | |
1105 | echo | |
1106 | fi | |
1107 | ||
1108 | cat config.report | |
1109 | ||
1110 | echo | |
1111 | echo Now you can type "make" to build ISC DHCP | |
1112 | echo |