]>
Commit | Line | Data |
---|---|---|
6706b115 CC |
1 | This file contains information for VSC9953, a Vitesse L2 Switch IP |
2 | which is integrated in the T1040/T1020 Freescale SoCs. | |
3 | ||
4 | About Device: | |
5 | ============= | |
6 | VSC9953 is an 8-port Gigabit Ethernet switch supports the following features: | |
7 | - 8192 MAC addresses | |
8 | - Static Address provisioning | |
9 | - Dynamic learning of MAC addresses and aging | |
10 | - 4096 VLANs | |
11 | - Independent and shared VLAN learning (IVL, SVL) | |
12 | - Policing with storm control and MC/BC protection | |
13 | - IPv4 and IPv6 multicast | |
14 | - Jumbo frames (9.6 KB) | |
15 | - Access Control List | |
16 | - VLAN editing, translation and remarking | |
17 | - RMON counters per port | |
18 | ||
19 | Switch interfaces: | |
20 | - 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs | |
21 | - 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links) | |
22 | to FMan ports (FM1@DTSEC1 and FM1@DTSEC2) | |
23 | ||
24 | Commands Overview: | |
25 | ============= | |
26 | Commands supported | |
27 | - enable/disable a port | |
28 | - check a port's link speed, duplexity and status. | |
29 | ||
30 | Commands syntax | |
31 | ethsw port <port_nr> enable|disable - enable/disable an l2 switch port | |
32 | ethsw port <port_nr> show - show an l2 switch port's configuration | |
33 | ||
34 | port_nr=0..9; use "all" for all ports | |
35 | ||
36 | => ethsw port all show | |
37 | Port Status Link Speed Duplex | |
38 | 0 enabled down 10 half | |
39 | 1 enabled down 10 half | |
40 | 2 enabled down 10 half | |
41 | 3 enabled up 1000 full | |
42 | 4 disabled down - half | |
43 | 5 disabled down - half | |
44 | 6 disabled down - half | |
45 | 7 disabled down - half | |
46 | 8 enabled up 2500 full | |
47 | 9 enabled up 2500 full | |
48 | => |