[thirdparty/u-boot.git] / drivers / gpio / lpc32xx_gpio.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * LPC32xxGPIO driver
 *
 * (C) Copyright 2014  DENX Software Engineering GmbH
 * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
 */

#include <common.h>
#include <asm/io.h>
#include <asm/arch-lpc32xx/cpu.h>
#include <asm/arch-lpc32xx/gpio.h>
#include <asm-generic/gpio.h>
#include <dm.h>

/**
 * LPC32xx GPIOs work in banks but are non-homogeneous:
 * - each bank holds a different number of GPIOs
 * - some GPIOs are input/ouput, some input only, some output only;
 * - some GPIOs have different meanings as an input and as an output;
 * - some GPIOs are controlled on a given port and bit index, but
 *   read on another one.
*
 * In order to keep this code simple, GPIOS are considered here as
 * homogeneous and linear, from 0 to 159.
 *
 *	** WARNING #1 **
 *
 * Client code is responsible for properly using valid GPIO numbers,
 * including cases where a single physical GPIO has differing numbers
 * for setting its direction, reading it and/or writing to it.
 *
 *	** WARNING #2 **
 *
 * Please read NOTE in description of lpc32xx_gpio_get_function().
 */

#define LPC32XX_GPIOS 160

struct lpc32xx_gpio_priv {
	struct gpio_regs *regs;
	/* GPIO FUNCTION: SEE WARNING #2 */
	signed char function[LPC32XX_GPIOS];
};

/**
 * We have 4 GPIO ports of 32 bits each
 *
 * Port mapping offset (32 bits each):
 * - Port 0: 0
 * - Port 1: 32
 * - Port 2: 64
 * - Port 3: GPO / GPIO (output): 96
 * - Port 3: GPI: 128
 */

#define MAX_GPIO 160

#define GPIO_TO_PORT(gpio) ((gpio / 32) & 7)
#define GPIO_TO_RANK(gpio) (gpio % 32)
#define GPIO_TO_MASK(gpio) (1 << (gpio % 32))

/**
 * Configure a GPIO number 'offset' as input
 */

static int lpc32xx_gpio_direction_input(struct udevice *dev, unsigned offset)
{
	int port, mask;
	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
	struct gpio_regs *regs = gpio_priv->regs;

	port = GPIO_TO_PORT(offset);
	mask = GPIO_TO_MASK(offset);

	switch (port) {
	case 0:
		writel(mask, &regs->p0_dir_clr);
		break;
	case 1:
		writel(mask, &regs->p1_dir_clr);
		break;
	case 2:
		/* ports 2 and 3 share a common direction */
		writel(mask, &regs->p2_p3_dir_clr);
		break;
	case 3:
		/* Setup direction only for GPIO_xx. */
		if ((mask >= 25) && (mask <= 30))
			writel(mask, &regs->p2_p3_dir_clr);
		break;
	case 4:
		/* GPI_xx; nothing to do. */
		break;
	default:
		return -1;
	}

	/* GPIO FUNCTION: SEE WARNING #2 */
	gpio_priv->function[offset] = GPIOF_INPUT;

	return 0;
}

/**
 * Get the value of a GPIO
 */

static int lpc32xx_gpio_get_value(struct udevice *dev, unsigned offset)
{
	int port, rank, mask, value;
	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
	struct gpio_regs *regs = gpio_priv->regs;

	port = GPIO_TO_PORT(offset);

	switch (port) {
	case 0:
		value = readl(&regs->p0_inp_state);
		break;
	case 1:
		value = readl(&regs->p1_inp_state);
		break;
	case 2:
		value = readl(&regs->p2_inp_state);
		break;
	case 3:
		/* Read GPO_xx and GPIO_xx (as output) using p3_outp_state. */
		value = readl(&regs->p3_outp_state);
		break;
	case 4:
		/* Read GPI_xx and GPIO_xx (as input) using p3_inp_state. */
		value = readl(&regs->p3_inp_state);
		break;
	default:
		return -1;
	}

	rank = GPIO_TO_RANK(offset);
	mask = GPIO_TO_MASK(offset);

	return (value & mask) >> rank;
}

/**
 * Set a GPIO
 */

static int gpio_set(struct udevice *dev, unsigned gpio)
{
	int port, mask;
	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
	struct gpio_regs *regs = gpio_priv->regs;

	port = GPIO_TO_PORT(gpio);
	mask = GPIO_TO_MASK(gpio);

	switch (port) {
	case 0:
		writel(mask, &regs->p0_outp_set);
		break;
	case 1:
		writel(mask, &regs->p1_outp_set);
		break;
	case 2:
		writel(mask, &regs->p2_outp_set);
		break;
	case 3:
		writel(mask, &regs->p3_outp_set);
		break;
	case 4:
		/* GPI_xx; invalid. */
	default:
		return -1;
	}
	return 0;
}

/**
 * Clear a GPIO
 */

static int gpio_clr(struct udevice *dev, unsigned gpio)
{
	int port, mask;
	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
	struct gpio_regs *regs = gpio_priv->regs;

	port = GPIO_TO_PORT(gpio);
	mask = GPIO_TO_MASK(gpio);

	switch (port) {
	case 0:
		writel(mask, &regs->p0_outp_clr);
		break;
	case 1:
		writel(mask, &regs->p1_outp_clr);
		break;
	case 2:
		writel(mask, &regs->p2_outp_clr);
		break;
	case 3:
		writel(mask, &regs->p3_outp_clr);
		break;
	case 4:
		/* GPI_xx; invalid. */
	default:
		return -1;
	}
	return 0;
}

/**
 * Set the value of a GPIO
 */

static int lpc32xx_gpio_set_value(struct udevice *dev, unsigned offset,
				 int value)
{
	if (value)
		return gpio_set(dev, offset);
	else
		return gpio_clr(dev, offset);
}

/**
 * Configure a GPIO number 'offset' as output with given initial value.
 */

static int lpc32xx_gpio_direction_output(struct udevice *dev, unsigned offset,
				       int value)
{
	int port, mask;
	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
	struct gpio_regs *regs = gpio_priv->regs;

	port = GPIO_TO_PORT(offset);
	mask = GPIO_TO_MASK(offset);

	switch (port) {
	case 0:
		writel(mask, &regs->p0_dir_set);
		break;
	case 1:
		writel(mask, &regs->p1_dir_set);
		break;
	case 2:
		/* ports 2 and 3 share a common direction */
		writel(mask, &regs->p2_p3_dir_set);
		break;
	case 3:
		/* Setup direction only for GPIO_xx. */
		if ((mask >= 25) && (mask <= 30))
			writel(mask, &regs->p2_p3_dir_set);
		break;
	case 4:
		/* GPI_xx; invalid. */
	default:
		return -1;
	}

	/* GPIO FUNCTION: SEE WARNING #2 */
	gpio_priv->function[offset] = GPIOF_OUTPUT;

	return lpc32xx_gpio_set_value(dev, offset, value);
}

/**
 * GPIO functions are supposed to be computed from their current
 * configuration, but that's way too complicated in LPC32XX. A simpler
 * approach is used, where the GPIO functions are cached in an array.
 * When the GPIO is in use, its function is either "input" or "output"
 * depending on its direction, otherwise its function is "unknown".
 *
 *	** NOTE **
 *
 * THIS APPROACH WAS CHOSEN DU TO THE COMPLEX NATURE OF THE LPC32XX
 * GPIOS; DO NOT TAKE THIS AS AN EXAMPLE FOR NEW CODE.
 */

static int lpc32xx_gpio_get_function(struct udevice *dev, unsigned offset)
{
	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
	return gpio_priv->function[offset];
}

static const struct dm_gpio_ops gpio_lpc32xx_ops = {
	.direction_input	= lpc32xx_gpio_direction_input,
	.direction_output	= lpc32xx_gpio_direction_output,
	.get_value		= lpc32xx_gpio_get_value,
	.set_value		= lpc32xx_gpio_set_value,
	.get_function		= lpc32xx_gpio_get_function,
};

static int lpc32xx_gpio_probe(struct udevice *dev)
{
	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
	struct gpio_dev_priv *uc_priv = dev->uclass_priv;

	if (dev_of_offset(dev) == -1) {
		/* Tell the uclass how many GPIOs we have */
		uc_priv->gpio_count = LPC32XX_GPIOS;
	}

	/* set base address for GPIO registers */
	gpio_priv->regs = (struct gpio_regs *)GPIO_BASE;

	/* all GPIO functions are unknown until requested */
	/* GPIO FUNCTION: SEE WARNING #2 */
	memset(gpio_priv->function, GPIOF_UNKNOWN, sizeof(gpio_priv->function));

	return 0;
}

U_BOOT_DRIVER(gpio_lpc32xx) = {
	.name	= "gpio_lpc32xx",
	.id	= UCLASS_GPIO,
	.ops	= &gpio_lpc32xx_ops,
	.probe	= lpc32xx_gpio_probe,
	.priv_auto_alloc_size = sizeof(struct lpc32xx_gpio_priv),
};
Commit	Line	Data
83d290c5	1	// SPDX-License-Identifier: GPL-2.0+
606f7047 AA	2	/*
	3	* LPC32xxGPIO driver
	4	*
	5	* (C) Copyright 2014 DENX Software Engineering GmbH
	6	* Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
606f7047 AA	7	*/
606f7047 AA	8
4af0d7e8	9	#include <common.h>
606f7047 AA	10	#include <asm/io.h>
	11	#include <asm/arch-lpc32xx/cpu.h>
	12	#include <asm/arch-lpc32xx/gpio.h>
	13	#include <asm-generic/gpio.h>
	14	#include <dm.h>
	15
	16	/**
	17	* LPC32xx GPIOs work in banks but are non-homogeneous:
	18	* - each bank holds a different number of GPIOs
	19	* - some GPIOs are input/ouput, some input only, some output only;
	20	* - some GPIOs have different meanings as an input and as an output;
	21	* - some GPIOs are controlled on a given port and bit index, but
	22	* read on another one.
	23	*
	24	* In order to keep this code simple, GPIOS are considered here as
89983478	25	* homogeneous and linear, from 0 to 159.
606f7047 AA	26	*
	27	* WARNING #1
	28	*
	29	* Client code is responsible for properly using valid GPIO numbers,
	30	* including cases where a single physical GPIO has differing numbers
	31	* for setting its direction, reading it and/or writing to it.
	32	*
	33	* WARNING #2
	34	*
	35	* Please read NOTE in description of lpc32xx_gpio_get_function().
	36	*/
	37
89983478	38	#define LPC32XX_GPIOS 160
606f7047	39
1f9e5e22	40	struct lpc32xx_gpio_priv {
606f7047 AA	41	struct gpio_regs *regs;
	42	/* GPIO FUNCTION: SEE WARNING #2 */
	43	signed char function[LPC32XX_GPIOS];
	44	};
	45
	46	/**
	47	* We have 4 GPIO ports of 32 bits each
89983478 SL	48	*
	49	* Port mapping offset (32 bits each):
	50	* - Port 0: 0
	51	* - Port 1: 32
	52	* - Port 2: 64
	53	* - Port 3: GPO / GPIO (output): 96
	54	* - Port 3: GPI: 128
606f7047 AA	55	*/
606f7047 AA	56
89983478	57	#define MAX_GPIO 160
606f7047	58
89983478	59	#define GPIO_TO_PORT(gpio) ((gpio / 32) & 7)
606f7047 AA	60	#define GPIO_TO_RANK(gpio) (gpio % 32)
	61	#define GPIO_TO_MASK(gpio) (1 << (gpio % 32))
	62
	63	/**
	64	* Configure a GPIO number 'offset' as input
	65	*/
	66
	67	static int lpc32xx_gpio_direction_input(struct udevice *dev, unsigned offset)
	68	{
	69	int port, mask;
1f9e5e22 AL	70	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
1f9e5e22 AL	71	struct gpio_regs *regs = gpio_priv->regs;
606f7047 AA	72
	73	port = GPIO_TO_PORT(offset);
	74	mask = GPIO_TO_MASK(offset);
	75
	76	switch (port) {
	77	case 0:
	78	writel(mask, &regs->p0_dir_clr);
	79	break;
	80	case 1:
	81	writel(mask, &regs->p1_dir_clr);
	82	break;
	83	case 2:
	84	/* ports 2 and 3 share a common direction */
606f7047 AA	85	writel(mask, &regs->p2_p3_dir_clr);
606f7047 AA	86	break;
89983478 SL	87	case 3:
	88	/* Setup direction only for GPIO_xx. */
	89	if ((mask >= 25) && (mask <= 30))
	90	writel(mask, &regs->p2_p3_dir_clr);
	91	break;
	92	case 4:
	93	/* GPI_xx; nothing to do. */
	94	break;
606f7047 AA	95	default:
	96	return -1;
	97	}
	98
	99	/* GPIO FUNCTION: SEE WARNING #2 */
1f9e5e22	100	gpio_priv->function[offset] = GPIOF_INPUT;
606f7047 AA	101
	102	return 0;
	103	}
	104
	105	/**
	106	* Get the value of a GPIO
	107	*/
	108
	109	static int lpc32xx_gpio_get_value(struct udevice *dev, unsigned offset)
	110	{
	111	int port, rank, mask, value;
1f9e5e22 AL	112	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
1f9e5e22 AL	113	struct gpio_regs *regs = gpio_priv->regs;
606f7047 AA	114
	115	port = GPIO_TO_PORT(offset);
	116
	117	switch (port) {
	118	case 0:
	119	value = readl(&regs->p0_inp_state);
	120	break;
	121	case 1:
	122	value = readl(&regs->p1_inp_state);
	123	break;
	124	case 2:
	125	value = readl(&regs->p2_inp_state);
	126	break;
	127	case 3:
89983478 SL	128	/* Read GPO_xx and GPIO_xx (as output) using p3_outp_state. */
	129	value = readl(&regs->p3_outp_state);
	130	break;
	131	case 4:
	132	/* Read GPI_xx and GPIO_xx (as input) using p3_inp_state. */
606f7047 AA	133	value = readl(&regs->p3_inp_state);
	134	break;
	135	default:
	136	return -1;
	137	}
	138
	139	rank = GPIO_TO_RANK(offset);
	140	mask = GPIO_TO_MASK(offset);
	141
	142	return (value & mask) >> rank;
	143	}
	144
	145	/**
	146	* Set a GPIO
	147	*/
	148
	149	static int gpio_set(struct udevice *dev, unsigned gpio)
	150	{
	151	int port, mask;
1f9e5e22 AL	152	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
1f9e5e22 AL	153	struct gpio_regs *regs = gpio_priv->regs;
606f7047 AA	154
	155	port = GPIO_TO_PORT(gpio);
	156	mask = GPIO_TO_MASK(gpio);
	157
	158	switch (port) {
	159	case 0:
	160	writel(mask, &regs->p0_outp_set);
	161	break;
	162	case 1:
	163	writel(mask, &regs->p1_outp_set);
	164	break;
	165	case 2:
	166	writel(mask, &regs->p2_outp_set);
	167	break;
	168	case 3:
	169	writel(mask, &regs->p3_outp_set);
	170	break;
89983478 SL	171	case 4:
89983478 SL	172	/* GPI_xx; invalid. */
606f7047 AA	173	default:
	174	return -1;
	175	}
	176	return 0;
	177	}
	178
	179	/**
	180	* Clear a GPIO
	181	*/
	182
	183	static int gpio_clr(struct udevice *dev, unsigned gpio)
	184	{
	185	int port, mask;
1f9e5e22 AL	186	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
1f9e5e22 AL	187	struct gpio_regs *regs = gpio_priv->regs;
606f7047 AA	188
	189	port = GPIO_TO_PORT(gpio);
	190	mask = GPIO_TO_MASK(gpio);
	191
	192	switch (port) {
	193	case 0:
	194	writel(mask, &regs->p0_outp_clr);
	195	break;
	196	case 1:
	197	writel(mask, &regs->p1_outp_clr);
	198	break;
	199	case 2:
	200	writel(mask, &regs->p2_outp_clr);
	201	break;
	202	case 3:
	203	writel(mask, &regs->p3_outp_clr);
	204	break;
89983478 SL	205	case 4:
89983478 SL	206	/* GPI_xx; invalid. */
606f7047 AA	207	default:
	208	return -1;
	209	}
	210	return 0;
	211	}
	212
	213	/**
	214	* Set the value of a GPIO
	215	*/
	216
	217	static int lpc32xx_gpio_set_value(struct udevice *dev, unsigned offset,
	218	int value)
	219	{
	220	if (value)
	221	return gpio_set(dev, offset);
	222	else
	223	return gpio_clr(dev, offset);
	224	}
	225
	226	/**
	227	* Configure a GPIO number 'offset' as output with given initial value.
	228	*/
	229
	230	static int lpc32xx_gpio_direction_output(struct udevice *dev, unsigned offset,
	231	int value)
	232	{
	233	int port, mask;
1f9e5e22 AL	234	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
1f9e5e22 AL	235	struct gpio_regs *regs = gpio_priv->regs;
606f7047 AA	236
	237	port = GPIO_TO_PORT(offset);
	238	mask = GPIO_TO_MASK(offset);
	239
	240	switch (port) {
	241	case 0:
	242	writel(mask, &regs->p0_dir_set);
	243	break;
	244	case 1:
	245	writel(mask, &regs->p1_dir_set);
	246	break;
	247	case 2:
	248	/* ports 2 and 3 share a common direction */
606f7047 AA	249	writel(mask, &regs->p2_p3_dir_set);
606f7047 AA	250	break;
89983478 SL	251	case 3:
	252	/* Setup direction only for GPIO_xx. */
	253	if ((mask >= 25) && (mask <= 30))
	254	writel(mask, &regs->p2_p3_dir_set);
	255	break;
	256	case 4:
	257	/* GPI_xx; invalid. */
606f7047 AA	258	default:
	259	return -1;
	260	}
	261
	262	/* GPIO FUNCTION: SEE WARNING #2 */
1f9e5e22	263	gpio_priv->function[offset] = GPIOF_OUTPUT;
606f7047 AA	264
	265	return lpc32xx_gpio_set_value(dev, offset, value);
	266	}
	267
	268	/**
	269	* GPIO functions are supposed to be computed from their current
	270	* configuration, but that's way too complicated in LPC32XX. A simpler
	271	* approach is used, where the GPIO functions are cached in an array.
	272	* When the GPIO is in use, its function is either "input" or "output"
	273	* depending on its direction, otherwise its function is "unknown".
	274	*
	275	* NOTE
	276	*
	277	* THIS APPROACH WAS CHOSEN DU TO THE COMPLEX NATURE OF THE LPC32XX
	278	* GPIOS; DO NOT TAKE THIS AS AN EXAMPLE FOR NEW CODE.
	279	*/
	280
	281	static int lpc32xx_gpio_get_function(struct udevice *dev, unsigned offset)
	282	{
1f9e5e22 AL	283	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
1f9e5e22 AL	284	return gpio_priv->function[offset];
606f7047 AA	285	}
	286
	287	static const struct dm_gpio_ops gpio_lpc32xx_ops = {
	288	.direction_input = lpc32xx_gpio_direction_input,
	289	.direction_output = lpc32xx_gpio_direction_output,
	290	.get_value = lpc32xx_gpio_get_value,
	291	.set_value = lpc32xx_gpio_set_value,
	292	.get_function = lpc32xx_gpio_get_function,
	293	};
	294
	295	static int lpc32xx_gpio_probe(struct udevice *dev)
	296	{
1f9e5e22	297	struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
606f7047 AA	298	struct gpio_dev_priv *uc_priv = dev->uclass_priv;
606f7047 AA	299
e160f7d4	300	if (dev_of_offset(dev) == -1) {
606f7047 AA	301	/* Tell the uclass how many GPIOs we have */
	302	uc_priv->gpio_count = LPC32XX_GPIOS;
	303	}
	304
	305	/* set base address for GPIO registers */
1f9e5e22	306	gpio_priv->regs = (struct gpio_regs *)GPIO_BASE;
606f7047 AA	307
	308	/* all GPIO functions are unknown until requested */
	309	/* GPIO FUNCTION: SEE WARNING #2 */
1f9e5e22	310	memset(gpio_priv->function, GPIOF_UNKNOWN, sizeof(gpio_priv->function));
606f7047 AA	311
	312	return 0;
	313	}
	314
	315	U_BOOT_DRIVER(gpio_lpc32xx) = {
	316	.name = "gpio_lpc32xx",
	317	.id = UCLASS_GPIO,
	318	.ops = &gpio_lpc32xx_ops,
	319	.probe = lpc32xx_gpio_probe,
1f9e5e22	320	.priv_auto_alloc_size = sizeof(struct lpc32xx_gpio_priv),
606f7047	321	};