]>
Commit | Line | Data |
---|---|---|
c942fddf | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
b1c97193 SY |
2 | /* |
3 | * IgorPlug-USB IR Receiver | |
4 | * | |
5 | * Copyright (C) 2014 Sean Young <sean@mess.org> | |
6 | * | |
7 | * Supports the standard homebrew IgorPlugUSB receiver with Igor's firmware. | |
8 | * See http://www.cesko.host.sk/IgorPlugUSB/IgorPlug-USB%20(AVR)_eng.htm | |
9 | * | |
10 | * Based on the lirc_igorplugusb.c driver: | |
11 | * Copyright (C) 2004 Jan M. Hochstein | |
12 | * <hochstein@algo.informatik.tu-darmstadt.de> | |
b1c97193 SY |
13 | */ |
14 | #include <linux/device.h> | |
15 | #include <linux/kernel.h> | |
16 | #include <linux/module.h> | |
17 | #include <linux/usb.h> | |
18 | #include <linux/usb/input.h> | |
19 | #include <media/rc-core.h> | |
20 | ||
21 | #define DRIVER_DESC "IgorPlug-USB IR Receiver" | |
22 | #define DRIVER_NAME "igorplugusb" | |
23 | ||
24 | #define HEADERLEN 3 | |
25 | #define BUFLEN 36 | |
26 | #define MAX_PACKET (HEADERLEN + BUFLEN) | |
27 | ||
28 | #define SET_INFRABUFFER_EMPTY 1 | |
29 | #define GET_INFRACODE 2 | |
30 | ||
31 | ||
32 | struct igorplugusb { | |
33 | struct rc_dev *rc; | |
34 | struct device *dev; | |
35 | ||
36 | struct urb *urb; | |
37 | struct usb_ctrlrequest request; | |
38 | ||
39 | struct timer_list timer; | |
40 | ||
41 | uint8_t buf_in[MAX_PACKET]; | |
42 | ||
43 | char phys[64]; | |
44 | }; | |
45 | ||
46 | static void igorplugusb_cmd(struct igorplugusb *ir, int cmd); | |
47 | ||
48 | static void igorplugusb_irdata(struct igorplugusb *ir, unsigned len) | |
49 | { | |
183e19f5 | 50 | struct ir_raw_event rawir = {}; |
b1c97193 SY |
51 | unsigned i, start, overflow; |
52 | ||
53 | dev_dbg(ir->dev, "irdata: %*ph (len=%u)", len, ir->buf_in, len); | |
54 | ||
55 | /* | |
56 | * If more than 36 pulses and spaces follow each other, the igorplugusb | |
57 | * overwrites its buffer from the beginning. The overflow value is the | |
58 | * last offset which was not overwritten. Everything from this offset | |
59 | * onwards occurred before everything until this offset. | |
60 | */ | |
61 | overflow = ir->buf_in[2]; | |
62 | i = start = overflow + HEADERLEN; | |
63 | ||
64 | if (start >= len) { | |
65 | dev_err(ir->dev, "receive overflow invalid: %u", overflow); | |
66 | } else { | |
67 | if (overflow > 0) | |
68 | dev_warn(ir->dev, "receive overflow, at least %u lost", | |
69 | overflow); | |
70 | ||
71 | do { | |
72 | rawir.duration = ir->buf_in[i] * 85333; | |
73 | rawir.pulse = i & 1; | |
74 | ||
75 | ir_raw_event_store_with_filter(ir->rc, &rawir); | |
76 | ||
77 | if (++i == len) | |
78 | i = HEADERLEN; | |
79 | } while (i != start); | |
80 | ||
81 | /* add a trailing space */ | |
82 | rawir.duration = ir->rc->timeout; | |
83 | rawir.pulse = false; | |
84 | ir_raw_event_store_with_filter(ir->rc, &rawir); | |
85 | ||
86 | ir_raw_event_handle(ir->rc); | |
87 | } | |
88 | ||
89 | igorplugusb_cmd(ir, SET_INFRABUFFER_EMPTY); | |
90 | } | |
91 | ||
92 | static void igorplugusb_callback(struct urb *urb) | |
93 | { | |
94 | struct usb_ctrlrequest *req; | |
95 | struct igorplugusb *ir = urb->context; | |
96 | ||
97 | req = (struct usb_ctrlrequest *)urb->setup_packet; | |
98 | ||
99 | switch (urb->status) { | |
100 | case 0: | |
101 | if (req->bRequest == GET_INFRACODE && | |
102 | urb->actual_length > HEADERLEN) | |
103 | igorplugusb_irdata(ir, urb->actual_length); | |
104 | else /* request IR */ | |
105 | mod_timer(&ir->timer, jiffies + msecs_to_jiffies(50)); | |
106 | break; | |
107 | case -EPROTO: | |
108 | case -ECONNRESET: | |
109 | case -ENOENT: | |
110 | case -ESHUTDOWN: | |
111 | usb_unlink_urb(urb); | |
112 | return; | |
113 | default: | |
114 | dev_warn(ir->dev, "Error: urb status = %d\n", urb->status); | |
115 | igorplugusb_cmd(ir, SET_INFRABUFFER_EMPTY); | |
116 | break; | |
117 | } | |
118 | } | |
119 | ||
120 | static void igorplugusb_cmd(struct igorplugusb *ir, int cmd) | |
121 | { | |
122 | int ret; | |
123 | ||
124 | ir->request.bRequest = cmd; | |
125 | ir->urb->transfer_flags = 0; | |
126 | ret = usb_submit_urb(ir->urb, GFP_ATOMIC); | |
127 | if (ret) | |
128 | dev_err(ir->dev, "submit urb failed: %d", ret); | |
129 | } | |
130 | ||
b17ec78a | 131 | static void igorplugusb_timer(struct timer_list *t) |
b1c97193 | 132 | { |
b17ec78a | 133 | struct igorplugusb *ir = from_timer(ir, t, timer); |
b1c97193 SY |
134 | |
135 | igorplugusb_cmd(ir, GET_INFRACODE); | |
136 | } | |
137 | ||
138 | static int igorplugusb_probe(struct usb_interface *intf, | |
139 | const struct usb_device_id *id) | |
140 | { | |
141 | struct usb_device *udev; | |
142 | struct usb_host_interface *idesc; | |
143 | struct usb_endpoint_descriptor *ep; | |
144 | struct igorplugusb *ir; | |
145 | struct rc_dev *rc; | |
a40973ff | 146 | int ret = -ENOMEM; |
b1c97193 SY |
147 | |
148 | udev = interface_to_usbdev(intf); | |
149 | idesc = intf->cur_altsetting; | |
150 | ||
151 | if (idesc->desc.bNumEndpoints != 1) { | |
152 | dev_err(&intf->dev, "incorrect number of endpoints"); | |
153 | return -ENODEV; | |
154 | } | |
155 | ||
156 | ep = &idesc->endpoint[0].desc; | |
157 | if (!usb_endpoint_dir_in(ep) || !usb_endpoint_xfer_control(ep)) { | |
158 | dev_err(&intf->dev, "endpoint incorrect"); | |
159 | return -ENODEV; | |
160 | } | |
161 | ||
162 | ir = devm_kzalloc(&intf->dev, sizeof(*ir), GFP_KERNEL); | |
163 | if (!ir) | |
164 | return -ENOMEM; | |
165 | ||
166 | ir->dev = &intf->dev; | |
167 | ||
b17ec78a | 168 | timer_setup(&ir->timer, igorplugusb_timer, 0); |
b1c97193 SY |
169 | |
170 | ir->request.bRequest = GET_INFRACODE; | |
171 | ir->request.bRequestType = USB_TYPE_VENDOR | USB_DIR_IN; | |
172 | ir->request.wLength = cpu_to_le16(sizeof(ir->buf_in)); | |
173 | ||
174 | ir->urb = usb_alloc_urb(0, GFP_KERNEL); | |
175 | if (!ir->urb) | |
a40973ff | 176 | goto fail; |
b1c97193 SY |
177 | |
178 | usb_fill_control_urb(ir->urb, udev, | |
179 | usb_rcvctrlpipe(udev, 0), (uint8_t *)&ir->request, | |
180 | ir->buf_in, sizeof(ir->buf_in), igorplugusb_callback, ir); | |
181 | ||
182 | usb_make_path(udev, ir->phys, sizeof(ir->phys)); | |
183 | ||
0f7499fd | 184 | rc = rc_allocate_device(RC_DRIVER_IR_RAW); |
a40973ff SY |
185 | if (!rc) |
186 | goto fail; | |
187 | ||
518f4b26 | 188 | rc->device_name = DRIVER_DESC; |
b1c97193 SY |
189 | rc->input_phys = ir->phys; |
190 | usb_to_input_id(udev, &rc->input_id); | |
191 | rc->dev.parent = &intf->dev; | |
b1c97193 SY |
192 | /* |
193 | * This device can only store 36 pulses + spaces, which is not enough | |
194 | * for the NEC protocol and many others. | |
195 | */ | |
6d741bfe SY |
196 | rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER & |
197 | ~(RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32 | | |
198 | RC_PROTO_BIT_RC6_6A_20 | RC_PROTO_BIT_RC6_6A_24 | | |
199 | RC_PROTO_BIT_RC6_6A_32 | RC_PROTO_BIT_RC6_MCE | | |
200 | RC_PROTO_BIT_SONY20 | RC_PROTO_BIT_SANYO); | |
b1c97193 SY |
201 | |
202 | rc->priv = ir; | |
203 | rc->driver_name = DRIVER_NAME; | |
204 | rc->map_name = RC_MAP_HAUPPAUGE; | |
205 | rc->timeout = MS_TO_NS(100); | |
206 | rc->rx_resolution = 85333; | |
207 | ||
208 | ir->rc = rc; | |
209 | ret = rc_register_device(rc); | |
210 | if (ret) { | |
211 | dev_err(&intf->dev, "failed to register rc device: %d", ret); | |
a40973ff | 212 | goto fail; |
b1c97193 SY |
213 | } |
214 | ||
215 | usb_set_intfdata(intf, ir); | |
216 | ||
217 | igorplugusb_cmd(ir, SET_INFRABUFFER_EMPTY); | |
218 | ||
219 | return 0; | |
a40973ff SY |
220 | fail: |
221 | rc_free_device(ir->rc); | |
222 | usb_free_urb(ir->urb); | |
223 | del_timer(&ir->timer); | |
224 | ||
225 | return ret; | |
b1c97193 SY |
226 | } |
227 | ||
228 | static void igorplugusb_disconnect(struct usb_interface *intf) | |
229 | { | |
230 | struct igorplugusb *ir = usb_get_intfdata(intf); | |
231 | ||
232 | rc_unregister_device(ir->rc); | |
233 | del_timer_sync(&ir->timer); | |
234 | usb_set_intfdata(intf, NULL); | |
235 | usb_kill_urb(ir->urb); | |
236 | usb_free_urb(ir->urb); | |
237 | } | |
238 | ||
5fad16b5 | 239 | static const struct usb_device_id igorplugusb_table[] = { |
b1c97193 SY |
240 | /* Igor Plug USB (Atmel's Manufact. ID) */ |
241 | { USB_DEVICE(0x03eb, 0x0002) }, | |
242 | /* Fit PC2 Infrared Adapter */ | |
243 | { USB_DEVICE(0x03eb, 0x21fe) }, | |
244 | /* Terminating entry */ | |
245 | { } | |
246 | }; | |
247 | ||
248 | static struct usb_driver igorplugusb_driver = { | |
249 | .name = DRIVER_NAME, | |
250 | .probe = igorplugusb_probe, | |
251 | .disconnect = igorplugusb_disconnect, | |
252 | .id_table = igorplugusb_table | |
253 | }; | |
254 | ||
255 | module_usb_driver(igorplugusb_driver); | |
256 | ||
257 | MODULE_DESCRIPTION(DRIVER_DESC); | |
258 | MODULE_AUTHOR("Sean Young <sean@mess.org>"); | |
259 | MODULE_LICENSE("GPL"); | |
260 | MODULE_DEVICE_TABLE(usb, igorplugusb_table); |