[thirdparty/kernel/stable.git] / drivers / memory / Kconfig

#
# Memory devices
#

menuconfig MEMORY
	bool "Memory Controller drivers"

if MEMORY

config ARM_PL172_MPMC
	tristate "ARM PL172 MPMC driver"
	depends on ARM_AMBA && OF
	help
	  This selects the ARM PrimeCell PL172 MultiPort Memory Controller.
	  If you have an embedded system with an AMBA bus and a PL172
	  controller, say Y or M here.

config ATMEL_SDRAMC
	bool "Atmel (Multi-port DDR-)SDRAM Controller"
	default y
	depends on ARCH_AT91 && OF
	help
	  This driver is for Atmel SDRAM Controller or Atmel Multi-port
	  DDR-SDRAM Controller available on Atmel AT91SAM9 and SAMA5 SoCs.
	  Starting with the at91sam9g45, this controller supports SDR, DDR and
	  LP-DDR memories.

config ATMEL_EBI
	bool "Atmel EBI driver"
	default y
	depends on ARCH_AT91 && OF
	select MFD_SYSCON
	select MFD_ATMEL_SMC
	help
	  Driver for Atmel EBI controller.
	  Used to configure the EBI (external bus interface) when the device-
	  tree is used. This bus supports NANDs, external ethernet controller,
	  SRAMs, ATA devices, etc.

config TI_AEMIF
	tristate "Texas Instruments AEMIF driver"
	depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF
	help
	  This driver is for the AEMIF module available in Texas Instruments
	  SoCs. AEMIF stands for Asynchronous External Memory Interface and
	  is intended to provide a glue-less interface to a variety of
	  asynchronuous memory devices like ASRAM, NOR and NAND memory. A total
	  of 256M bytes of any of these memories can be accessed at a given
	  time via four chip selects with 64M byte access per chip select.

config TI_EMIF
	tristate "Texas Instruments EMIF driver"
	depends on ARCH_OMAP2PLUS
	select DDR
	help
	  This driver is for the EMIF module available in Texas Instruments
	  SoCs. EMIF is an SDRAM controller that, based on its revision,
	  supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
	  This driver takes care of only LPDDR2 memories presently. The
	  functions of the driver includes re-configuring AC timing
	  parameters and other settings during frequency, voltage and
	  temperature changes

config OMAP_GPMC
	bool
	select GPIOLIB
	help
	  This driver is for the General Purpose Memory Controller (GPMC)
	  present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
	  interfacing to a variety of asynchronous as well as synchronous
	  memory drives like NOR, NAND, OneNAND, SRAM.

config OMAP_GPMC_DEBUG
	bool "Enable GPMC debug output and skip reset of GPMC during init"
	depends on OMAP_GPMC
	help
	  Enables verbose debugging mostly to decode the bootloader provided
	  timings. To preserve the bootloader provided timings, the reset
	  of GPMC is skipped during init. Enable this during development to
	  configure devices connected to the GPMC bus.

	  NOTE: In addition to matching the register setup with the bootloader
	  you also need to match the GPMC FCLK frequency used by the
	  bootloader or else the GPMC timings won't be identical with the
	  bootloader timings.

config TI_EMIF_SRAM
	tristate "Texas Instruments EMIF SRAM driver"
	depends on (SOC_AM33XX || SOC_AM43XX) && SRAM
	help
	  This driver is for the EMIF module available on Texas Instruments
	  AM33XX and AM43XX SoCs and is required for PM. Certain parts of
	  the EMIF PM code must run from on-chip SRAM late in the suspend
	  sequence so this driver provides several relocatable PM functions
	  for the SoC PM code to use.

config MVEBU_DEVBUS
	bool "Marvell EBU Device Bus Controller"
	default y
	depends on PLAT_ORION && OF
	help
	  This driver is for the Device Bus controller available in some
	  Marvell EBU SoCs such as Discovery (mv78xx0), Orion (88f5xxx) and
	  Armada 370 and Armada XP. This controller allows to handle flash
	  devices such as NOR, NAND, SRAM, and FPGA.

config FSL_CORENET_CF
	tristate "Freescale CoreNet Error Reporting"
	depends on FSL_SOC_BOOKE
	help
	  Say Y for reporting of errors from the Freescale CoreNet
	  Coherency Fabric.  Errors reported include accesses to
	  physical addresses that mapped by no local access window
	  (LAW) or an invalid LAW, as well as bad cache state that
	  represents a coherency violation.

config FSL_IFC
	bool
	depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
	depends on HAS_IOMEM

config JZ4780_NEMC
	bool "Ingenic JZ4780 SoC NEMC driver"
	default y
	depends on MACH_JZ4780 || COMPILE_TEST
	depends on HAS_IOMEM && OF
	help
	  This driver is for the NAND/External Memory Controller (NEMC) in
	  the Ingenic JZ4780. This controller is used to handle external
	  memory devices such as NAND and SRAM.

config MTK_SMI
	bool
	depends on ARCH_MEDIATEK || COMPILE_TEST
	help
	  This driver is for the Memory Controller module in MediaTek SoCs,
	  mainly help enable/disable iommu and control the power domain and
	  clocks for each local arbiter.

config DA8XX_DDRCTL
	bool "Texas Instruments da8xx DDR2/mDDR driver"
	depends on ARCH_DAVINCI_DA8XX
	help
	  This driver is for the DDR2/mDDR Memory Controller present on
	  Texas Instruments da8xx SoCs. It's used to tweak various memory
	  controller configuration options.

config PL353_SMC
	tristate "ARM PL35X Static Memory Controller(SMC) driver"
	default y
	depends on ARM
	depends on ARM_AMBA
	help
	  This driver is for the ARM PL351/PL353 Static Memory
	  Controller(SMC) module.

source "drivers/memory/samsung/Kconfig"
source "drivers/memory/tegra/Kconfig"

endif
Commit	Line	Data
7ec94453 A	1	#
	2	# Memory devices
	3	#
	4
	5	menuconfig MEMORY
	6	bool "Memory Controller drivers"
	7
	8	if MEMORY
	9
17c50b70 JE	10	config ARM_PL172_MPMC
	11	tristate "ARM PL172 MPMC driver"
	12	depends on ARM_AMBA && OF
	13	help
	14	This selects the ARM PrimeCell PL172 MultiPort Memory Controller.
	15	If you have an embedded system with an AMBA bus and a PL172
	16	controller, say Y or M here.
	17
e81b6abe AB	18	config ATMEL_SDRAMC
	19	bool "Atmel (Multi-port DDR-)SDRAM Controller"
	20	default y
	21	depends on ARCH_AT91 && OF
	22	help
	23	This driver is for Atmel SDRAM Controller or Atmel Multi-port
	24	DDR-SDRAM Controller available on Atmel AT91SAM9 and SAMA5 SoCs.
	25	Starting with the at91sam9g45, this controller supports SDR, DDR and
	26	LP-DDR memories.
	27
6a4ec4cd BB	28	config ATMEL_EBI
	29	bool "Atmel EBI driver"
	30	default y
	31	depends on ARCH_AT91 && OF
	32	select MFD_SYSCON
8eb8c7d8	33	select MFD_ATMEL_SMC
6a4ec4cd BB	34	help
	35	Driver for Atmel EBI controller.
	36	Used to configure the EBI (external bus interface) when the device-
	37	tree is used. This bus supports NANDs, external ethernet controller,
	38	SRAMs, ATA devices, etc.
	39
5a7c8154 IK	40	config TI_AEMIF
	41	tristate "Texas Instruments AEMIF driver"
	42	depends on (ARCH_DAVINCI \|\| ARCH_KEYSTONE) && OF
	43	help
	44	This driver is for the AEMIF module available in Texas Instruments
	45	SoCs. AEMIF stands for Asynchronous External Memory Interface and
	46	is intended to provide a glue-less interface to a variety of
	47	asynchronuous memory devices like ASRAM, NOR and NAND memory. A total
	48	of 256M bytes of any of these memories can be accessed at a given
	49	time via four chip selects with 64M byte access per chip select.
	50
7ec94453 A	51	config TI_EMIF
7ec94453 A	52	tristate "Texas Instruments EMIF driver"
18e9a971	53	depends on ARCH_OMAP2PLUS
7ec94453 A	54	select DDR
	55	help
	56	This driver is for the EMIF module available in Texas Instruments
	57	SoCs. EMIF is an SDRAM controller that, based on its revision,
	58	supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
	59	This driver takes care of only LPDDR2 memories presently. The
	60	functions of the driver includes re-configuring AC timing
	61	parameters and other settings during frequency, voltage and
	62	temperature changes
	63
18640193 TL	64	config OMAP_GPMC
18640193 TL	65	bool
d2d00862	66	select GPIOLIB
18640193 TL	67	help
	68	This driver is for the General Purpose Memory Controller (GPMC)
	69	present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
	70	interfacing to a variety of asynchronous as well as synchronous
	71	memory drives like NOR, NAND, OneNAND, SRAM.
	72
63aa945b	73	config OMAP_GPMC_DEBUG
be59b619	74	bool "Enable GPMC debug output and skip reset of GPMC during init"
63aa945b TL	75	depends on OMAP_GPMC
	76	help
	77	Enables verbose debugging mostly to decode the bootloader provided
be59b619 TL	78	timings. To preserve the bootloader provided timings, the reset
	79	of GPMC is skipped during init. Enable this during development to
	80	configure devices connected to the GPMC bus.
	81
	82	NOTE: In addition to matching the register setup with the bootloader
	83	you also need to match the GPMC FCLK frequency used by the
	84	bootloader or else the GPMC timings won't be identical with the
	85	bootloader timings.
63aa945b	86
8428e5ad DG	87	config TI_EMIF_SRAM
	88	tristate "Texas Instruments EMIF SRAM driver"
	89	depends on (SOC_AM33XX \|\| SOC_AM43XX) && SRAM
	90	help
	91	This driver is for the EMIF module available on Texas Instruments
	92	AM33XX and AM43XX SoCs and is required for PM. Certain parts of
	93	the EMIF PM code must run from on-chip SRAM late in the suspend
	94	sequence so this driver provides several relocatable PM functions
	95	for the SoC PM code to use.
	96
3edad321 EG	97	config MVEBU_DEVBUS
	98	bool "Marvell EBU Device Bus Controller"
	99	default y
	100	depends on PLAT_ORION && OF
	101	help
	102	This driver is for the Device Bus controller available in some
	103	Marvell EBU SoCs such as Discovery (mv78xx0), Orion (88f5xxx) and
	104	Armada 370 and Armada XP. This controller allows to handle flash
	105	devices such as NOR, NAND, SRAM, and FPGA.
	106
54afbec0 SW	107	config FSL_CORENET_CF
	108	tristate "Freescale CoreNet Error Reporting"
	109	depends on FSL_SOC_BOOKE
	110	help
	111	Say Y for reporting of errors from the Freescale CoreNet
	112	Coherency Fabric. Errors reported include accesses to
	113	physical addresses that mapped by no local access window
	114	(LAW) or an invalid LAW, as well as bad cache state that
	115	represents a coherency violation.
	116
42d87b18 PG	117	config FSL_IFC
42d87b18 PG	118	bool
b30a2bd4 BB	119	depends on FSL_SOC \|\| ARCH_LAYERSCAPE \|\| SOC_LS1021A \|\| COMPILE_TEST
b30a2bd4 BB	120	depends on HAS_IOMEM
42d87b18	121
911a8882 AS	122	config JZ4780_NEMC
	123	bool "Ingenic JZ4780 SoC NEMC driver"
	124	default y
ab99e110	125	depends on MACH_JZ4780 \|\| COMPILE_TEST
16909c81	126	depends on HAS_IOMEM && OF
911a8882 AS	127	help
	128	This driver is for the NAND/External Memory Controller (NEMC) in
	129	the Ingenic JZ4780. This controller is used to handle external
	130	memory devices such as NAND and SRAM.
	131
cc8bbe1a YW	132	config MTK_SMI
	133	bool
	134	depends on ARCH_MEDIATEK \|\| COMPILE_TEST
	135	help
	136	This driver is for the Memory Controller module in MediaTek SoCs,
	137	mainly help enable/disable iommu and control the power domain and
	138	clocks for each local arbiter.
	139
62a8a739 BG	140	config DA8XX_DDRCTL
	141	bool "Texas Instruments da8xx DDR2/mDDR driver"
	142	depends on ARCH_DAVINCI_DA8XX
	143	help
	144	This driver is for the DDR2/mDDR Memory Controller present on
	145	Texas Instruments da8xx SoCs. It's used to tweak various memory
	146	controller configuration options.
	147
fee10bd2 NSR	148	config PL353_SMC
	149	tristate "ARM PL35X Static Memory Controller(SMC) driver"
	150	default y
	151	depends on ARM
	152	depends on ARM_AMBA
	153	help
	154	This driver is for the ARM PL351/PL353 Static Memory
	155	Controller(SMC) module.
	156
a8aabb91	157	source "drivers/memory/samsung/Kconfig"
89184651 TR	158	source "drivers/memory/tegra/Kconfig"
89184651 TR	159
7ec94453	160	endif