]>
Commit | Line | Data |
---|---|---|
f399d4a2 KP |
1 | /* |
2 | * Copyright (c) International Business Machines Corp., 2006 | |
3 | * Copyright (c) Nokia Corporation, 2007 | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License as published by | |
7 | * the Free Software Foundation; either version 2 of the License, or | |
8 | * (at your option) any later version. | |
9 | * | |
10 | * This program is distributed in the hope that it will be useful, | |
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See | |
13 | * the GNU General Public License for more details. | |
14 | * | |
15 | * You should have received a copy of the GNU General Public License | |
16 | * along with this program; if not, write to the Free Software | |
17 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
18 | * | |
19 | * Author: Artem Bityutskiy (Битюцкий Артём), | |
20 | * Frank Haverkamp | |
21 | */ | |
22 | ||
23 | /* | |
24 | * This file includes UBI initialization and building of UBI devices. | |
25 | * | |
26 | * When UBI is initialized, it attaches all the MTD devices specified as the | |
27 | * module load parameters or the kernel boot parameters. If MTD devices were | |
28 | * specified, UBI does not attach any MTD device, but it is possible to do | |
29 | * later using the "UBI control device". | |
30 | * | |
31 | * At the moment we only attach UBI devices by scanning, which will become a | |
32 | * bottleneck when flashes reach certain large size. Then one may improve UBI | |
33 | * and add other methods, although it does not seem to be easy to do. | |
34 | */ | |
35 | ||
36 | #ifdef UBI_LINUX | |
37 | #include <linux/err.h> | |
38 | #include <linux/module.h> | |
39 | #include <linux/moduleparam.h> | |
40 | #include <linux/stringify.h> | |
41 | #include <linux/stat.h> | |
42 | #include <linux/miscdevice.h> | |
43 | #include <linux/log2.h> | |
44 | #include <linux/kthread.h> | |
45 | #endif | |
46 | #include <ubi_uboot.h> | |
47 | #include "ubi.h" | |
48 | ||
60cfe87b SR |
49 | #if (CONFIG_SYS_MALLOC_LEN < (512 << 10)) |
50 | #error Malloc area too small for UBI, increase CONFIG_SYS_MALLOC_LEN to >= 512k | |
51 | #endif | |
52 | ||
f399d4a2 KP |
53 | /* Maximum length of the 'mtd=' parameter */ |
54 | #define MTD_PARAM_LEN_MAX 64 | |
55 | ||
56 | /** | |
57 | * struct mtd_dev_param - MTD device parameter description data structure. | |
58 | * @name: MTD device name or number string | |
59 | * @vid_hdr_offs: VID header offset | |
60 | */ | |
61 | struct mtd_dev_param | |
62 | { | |
63 | char name[MTD_PARAM_LEN_MAX]; | |
64 | int vid_hdr_offs; | |
65 | }; | |
66 | ||
67 | /* Numbers of elements set in the @mtd_dev_param array */ | |
68 | static int mtd_devs = 0; | |
69 | ||
70 | /* MTD devices specification parameters */ | |
71 | static struct mtd_dev_param mtd_dev_param[UBI_MAX_DEVICES]; | |
72 | ||
73 | /* Root UBI "class" object (corresponds to '/<sysfs>/class/ubi/') */ | |
74 | struct class *ubi_class; | |
75 | ||
76 | #ifdef UBI_LINUX | |
77 | /* Slab cache for wear-leveling entries */ | |
78 | struct kmem_cache *ubi_wl_entry_slab; | |
79 | ||
80 | /* UBI control character device */ | |
81 | static struct miscdevice ubi_ctrl_cdev = { | |
82 | .minor = MISC_DYNAMIC_MINOR, | |
83 | .name = "ubi_ctrl", | |
84 | .fops = &ubi_ctrl_cdev_operations, | |
85 | }; | |
86 | #endif | |
87 | ||
88 | /* All UBI devices in system */ | |
89 | struct ubi_device *ubi_devices[UBI_MAX_DEVICES]; | |
90 | ||
91 | #ifdef UBI_LINUX | |
92 | /* Serializes UBI devices creations and removals */ | |
93 | DEFINE_MUTEX(ubi_devices_mutex); | |
94 | ||
95 | /* Protects @ubi_devices and @ubi->ref_count */ | |
96 | static DEFINE_SPINLOCK(ubi_devices_lock); | |
97 | ||
98 | /* "Show" method for files in '/<sysfs>/class/ubi/' */ | |
99 | static ssize_t ubi_version_show(struct class *class, char *buf) | |
100 | { | |
101 | return sprintf(buf, "%d\n", UBI_VERSION); | |
102 | } | |
103 | ||
104 | /* UBI version attribute ('/<sysfs>/class/ubi/version') */ | |
105 | static struct class_attribute ubi_version = | |
106 | __ATTR(version, S_IRUGO, ubi_version_show, NULL); | |
107 | ||
108 | static ssize_t dev_attribute_show(struct device *dev, | |
109 | struct device_attribute *attr, char *buf); | |
110 | ||
111 | /* UBI device attributes (correspond to files in '/<sysfs>/class/ubi/ubiX') */ | |
112 | static struct device_attribute dev_eraseblock_size = | |
113 | __ATTR(eraseblock_size, S_IRUGO, dev_attribute_show, NULL); | |
114 | static struct device_attribute dev_avail_eraseblocks = | |
115 | __ATTR(avail_eraseblocks, S_IRUGO, dev_attribute_show, NULL); | |
116 | static struct device_attribute dev_total_eraseblocks = | |
117 | __ATTR(total_eraseblocks, S_IRUGO, dev_attribute_show, NULL); | |
118 | static struct device_attribute dev_volumes_count = | |
119 | __ATTR(volumes_count, S_IRUGO, dev_attribute_show, NULL); | |
120 | static struct device_attribute dev_max_ec = | |
121 | __ATTR(max_ec, S_IRUGO, dev_attribute_show, NULL); | |
122 | static struct device_attribute dev_reserved_for_bad = | |
123 | __ATTR(reserved_for_bad, S_IRUGO, dev_attribute_show, NULL); | |
124 | static struct device_attribute dev_bad_peb_count = | |
125 | __ATTR(bad_peb_count, S_IRUGO, dev_attribute_show, NULL); | |
126 | static struct device_attribute dev_max_vol_count = | |
127 | __ATTR(max_vol_count, S_IRUGO, dev_attribute_show, NULL); | |
128 | static struct device_attribute dev_min_io_size = | |
129 | __ATTR(min_io_size, S_IRUGO, dev_attribute_show, NULL); | |
130 | static struct device_attribute dev_bgt_enabled = | |
131 | __ATTR(bgt_enabled, S_IRUGO, dev_attribute_show, NULL); | |
132 | static struct device_attribute dev_mtd_num = | |
133 | __ATTR(mtd_num, S_IRUGO, dev_attribute_show, NULL); | |
134 | #endif | |
135 | ||
136 | /** | |
137 | * ubi_get_device - get UBI device. | |
138 | * @ubi_num: UBI device number | |
139 | * | |
140 | * This function returns UBI device description object for UBI device number | |
141 | * @ubi_num, or %NULL if the device does not exist. This function increases the | |
142 | * device reference count to prevent removal of the device. In other words, the | |
143 | * device cannot be removed if its reference count is not zero. | |
144 | */ | |
145 | struct ubi_device *ubi_get_device(int ubi_num) | |
146 | { | |
147 | struct ubi_device *ubi; | |
148 | ||
149 | spin_lock(&ubi_devices_lock); | |
150 | ubi = ubi_devices[ubi_num]; | |
151 | if (ubi) { | |
152 | ubi_assert(ubi->ref_count >= 0); | |
153 | ubi->ref_count += 1; | |
154 | get_device(&ubi->dev); | |
155 | } | |
156 | spin_unlock(&ubi_devices_lock); | |
157 | ||
158 | return ubi; | |
159 | } | |
160 | ||
161 | /** | |
162 | * ubi_put_device - drop an UBI device reference. | |
163 | * @ubi: UBI device description object | |
164 | */ | |
165 | void ubi_put_device(struct ubi_device *ubi) | |
166 | { | |
167 | spin_lock(&ubi_devices_lock); | |
168 | ubi->ref_count -= 1; | |
169 | put_device(&ubi->dev); | |
170 | spin_unlock(&ubi_devices_lock); | |
171 | } | |
172 | ||
173 | /** | |
174 | * ubi_get_by_major - get UBI device description object by character device | |
175 | * major number. | |
176 | * @major: major number | |
177 | * | |
178 | * This function is similar to 'ubi_get_device()', but it searches the device | |
179 | * by its major number. | |
180 | */ | |
181 | struct ubi_device *ubi_get_by_major(int major) | |
182 | { | |
183 | int i; | |
184 | struct ubi_device *ubi; | |
185 | ||
186 | spin_lock(&ubi_devices_lock); | |
187 | for (i = 0; i < UBI_MAX_DEVICES; i++) { | |
188 | ubi = ubi_devices[i]; | |
189 | if (ubi && MAJOR(ubi->cdev.dev) == major) { | |
190 | ubi_assert(ubi->ref_count >= 0); | |
191 | ubi->ref_count += 1; | |
192 | get_device(&ubi->dev); | |
193 | spin_unlock(&ubi_devices_lock); | |
194 | return ubi; | |
195 | } | |
196 | } | |
197 | spin_unlock(&ubi_devices_lock); | |
198 | ||
199 | return NULL; | |
200 | } | |
201 | ||
202 | /** | |
203 | * ubi_major2num - get UBI device number by character device major number. | |
204 | * @major: major number | |
205 | * | |
206 | * This function searches UBI device number object by its major number. If UBI | |
207 | * device was not found, this function returns -ENODEV, otherwise the UBI device | |
208 | * number is returned. | |
209 | */ | |
210 | int ubi_major2num(int major) | |
211 | { | |
212 | int i, ubi_num = -ENODEV; | |
213 | ||
214 | spin_lock(&ubi_devices_lock); | |
215 | for (i = 0; i < UBI_MAX_DEVICES; i++) { | |
216 | struct ubi_device *ubi = ubi_devices[i]; | |
217 | ||
218 | if (ubi && MAJOR(ubi->cdev.dev) == major) { | |
219 | ubi_num = ubi->ubi_num; | |
220 | break; | |
221 | } | |
222 | } | |
223 | spin_unlock(&ubi_devices_lock); | |
224 | ||
225 | return ubi_num; | |
226 | } | |
227 | ||
228 | #ifdef UBI_LINUX | |
229 | /* "Show" method for files in '/<sysfs>/class/ubi/ubiX/' */ | |
230 | static ssize_t dev_attribute_show(struct device *dev, | |
231 | struct device_attribute *attr, char *buf) | |
232 | { | |
233 | ssize_t ret; | |
234 | struct ubi_device *ubi; | |
235 | ||
236 | /* | |
237 | * The below code looks weird, but it actually makes sense. We get the | |
238 | * UBI device reference from the contained 'struct ubi_device'. But it | |
239 | * is unclear if the device was removed or not yet. Indeed, if the | |
240 | * device was removed before we increased its reference count, | |
241 | * 'ubi_get_device()' will return -ENODEV and we fail. | |
242 | * | |
243 | * Remember, 'struct ubi_device' is freed in the release function, so | |
244 | * we still can use 'ubi->ubi_num'. | |
245 | */ | |
246 | ubi = container_of(dev, struct ubi_device, dev); | |
247 | ubi = ubi_get_device(ubi->ubi_num); | |
248 | if (!ubi) | |
249 | return -ENODEV; | |
250 | ||
251 | if (attr == &dev_eraseblock_size) | |
252 | ret = sprintf(buf, "%d\n", ubi->leb_size); | |
253 | else if (attr == &dev_avail_eraseblocks) | |
254 | ret = sprintf(buf, "%d\n", ubi->avail_pebs); | |
255 | else if (attr == &dev_total_eraseblocks) | |
256 | ret = sprintf(buf, "%d\n", ubi->good_peb_count); | |
257 | else if (attr == &dev_volumes_count) | |
258 | ret = sprintf(buf, "%d\n", ubi->vol_count - UBI_INT_VOL_COUNT); | |
259 | else if (attr == &dev_max_ec) | |
260 | ret = sprintf(buf, "%d\n", ubi->max_ec); | |
261 | else if (attr == &dev_reserved_for_bad) | |
262 | ret = sprintf(buf, "%d\n", ubi->beb_rsvd_pebs); | |
263 | else if (attr == &dev_bad_peb_count) | |
264 | ret = sprintf(buf, "%d\n", ubi->bad_peb_count); | |
265 | else if (attr == &dev_max_vol_count) | |
266 | ret = sprintf(buf, "%d\n", ubi->vtbl_slots); | |
267 | else if (attr == &dev_min_io_size) | |
268 | ret = sprintf(buf, "%d\n", ubi->min_io_size); | |
269 | else if (attr == &dev_bgt_enabled) | |
270 | ret = sprintf(buf, "%d\n", ubi->thread_enabled); | |
271 | else if (attr == &dev_mtd_num) | |
272 | ret = sprintf(buf, "%d\n", ubi->mtd->index); | |
273 | else | |
274 | ret = -EINVAL; | |
275 | ||
276 | ubi_put_device(ubi); | |
277 | return ret; | |
278 | } | |
279 | ||
280 | /* Fake "release" method for UBI devices */ | |
281 | static void dev_release(struct device *dev) { } | |
282 | ||
283 | /** | |
284 | * ubi_sysfs_init - initialize sysfs for an UBI device. | |
285 | * @ubi: UBI device description object | |
286 | * | |
287 | * This function returns zero in case of success and a negative error code in | |
288 | * case of failure. | |
289 | */ | |
290 | static int ubi_sysfs_init(struct ubi_device *ubi) | |
291 | { | |
292 | int err; | |
293 | ||
294 | ubi->dev.release = dev_release; | |
295 | ubi->dev.devt = ubi->cdev.dev; | |
296 | ubi->dev.class = ubi_class; | |
297 | sprintf(&ubi->dev.bus_id[0], UBI_NAME_STR"%d", ubi->ubi_num); | |
298 | err = device_register(&ubi->dev); | |
299 | if (err) | |
300 | return err; | |
301 | ||
302 | err = device_create_file(&ubi->dev, &dev_eraseblock_size); | |
303 | if (err) | |
304 | return err; | |
305 | err = device_create_file(&ubi->dev, &dev_avail_eraseblocks); | |
306 | if (err) | |
307 | return err; | |
308 | err = device_create_file(&ubi->dev, &dev_total_eraseblocks); | |
309 | if (err) | |
310 | return err; | |
311 | err = device_create_file(&ubi->dev, &dev_volumes_count); | |
312 | if (err) | |
313 | return err; | |
314 | err = device_create_file(&ubi->dev, &dev_max_ec); | |
315 | if (err) | |
316 | return err; | |
317 | err = device_create_file(&ubi->dev, &dev_reserved_for_bad); | |
318 | if (err) | |
319 | return err; | |
320 | err = device_create_file(&ubi->dev, &dev_bad_peb_count); | |
321 | if (err) | |
322 | return err; | |
323 | err = device_create_file(&ubi->dev, &dev_max_vol_count); | |
324 | if (err) | |
325 | return err; | |
326 | err = device_create_file(&ubi->dev, &dev_min_io_size); | |
327 | if (err) | |
328 | return err; | |
329 | err = device_create_file(&ubi->dev, &dev_bgt_enabled); | |
330 | if (err) | |
331 | return err; | |
332 | err = device_create_file(&ubi->dev, &dev_mtd_num); | |
333 | return err; | |
334 | } | |
335 | ||
336 | /** | |
337 | * ubi_sysfs_close - close sysfs for an UBI device. | |
338 | * @ubi: UBI device description object | |
339 | */ | |
340 | static void ubi_sysfs_close(struct ubi_device *ubi) | |
341 | { | |
342 | device_remove_file(&ubi->dev, &dev_mtd_num); | |
343 | device_remove_file(&ubi->dev, &dev_bgt_enabled); | |
344 | device_remove_file(&ubi->dev, &dev_min_io_size); | |
345 | device_remove_file(&ubi->dev, &dev_max_vol_count); | |
346 | device_remove_file(&ubi->dev, &dev_bad_peb_count); | |
347 | device_remove_file(&ubi->dev, &dev_reserved_for_bad); | |
348 | device_remove_file(&ubi->dev, &dev_max_ec); | |
349 | device_remove_file(&ubi->dev, &dev_volumes_count); | |
350 | device_remove_file(&ubi->dev, &dev_total_eraseblocks); | |
351 | device_remove_file(&ubi->dev, &dev_avail_eraseblocks); | |
352 | device_remove_file(&ubi->dev, &dev_eraseblock_size); | |
353 | device_unregister(&ubi->dev); | |
354 | } | |
355 | #endif | |
356 | ||
357 | /** | |
358 | * kill_volumes - destroy all volumes. | |
359 | * @ubi: UBI device description object | |
360 | */ | |
361 | static void kill_volumes(struct ubi_device *ubi) | |
362 | { | |
363 | int i; | |
364 | ||
365 | for (i = 0; i < ubi->vtbl_slots; i++) | |
366 | if (ubi->volumes[i]) | |
367 | ubi_free_volume(ubi, ubi->volumes[i]); | |
368 | } | |
369 | ||
370 | /** | |
371 | * uif_init - initialize user interfaces for an UBI device. | |
372 | * @ubi: UBI device description object | |
373 | * | |
374 | * This function returns zero in case of success and a negative error code in | |
375 | * case of failure. | |
376 | */ | |
377 | static int uif_init(struct ubi_device *ubi) | |
378 | { | |
379 | int i, err; | |
380 | #ifdef UBI_LINUX | |
381 | dev_t dev; | |
382 | #endif | |
383 | ||
384 | sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num); | |
385 | ||
386 | /* | |
387 | * Major numbers for the UBI character devices are allocated | |
388 | * dynamically. Major numbers of volume character devices are | |
389 | * equivalent to ones of the corresponding UBI character device. Minor | |
390 | * numbers of UBI character devices are 0, while minor numbers of | |
391 | * volume character devices start from 1. Thus, we allocate one major | |
392 | * number and ubi->vtbl_slots + 1 minor numbers. | |
393 | */ | |
394 | err = alloc_chrdev_region(&dev, 0, ubi->vtbl_slots + 1, ubi->ubi_name); | |
395 | if (err) { | |
396 | ubi_err("cannot register UBI character devices"); | |
397 | return err; | |
398 | } | |
399 | ||
400 | ubi_assert(MINOR(dev) == 0); | |
401 | cdev_init(&ubi->cdev, &ubi_cdev_operations); | |
402 | dbg_msg("%s major is %u", ubi->ubi_name, MAJOR(dev)); | |
403 | ubi->cdev.owner = THIS_MODULE; | |
404 | ||
405 | err = cdev_add(&ubi->cdev, dev, 1); | |
406 | if (err) { | |
407 | ubi_err("cannot add character device"); | |
408 | goto out_unreg; | |
409 | } | |
410 | ||
411 | err = ubi_sysfs_init(ubi); | |
412 | if (err) | |
413 | goto out_sysfs; | |
414 | ||
415 | for (i = 0; i < ubi->vtbl_slots; i++) | |
416 | if (ubi->volumes[i]) { | |
417 | err = ubi_add_volume(ubi, ubi->volumes[i]); | |
418 | if (err) { | |
419 | ubi_err("cannot add volume %d", i); | |
420 | goto out_volumes; | |
421 | } | |
422 | } | |
423 | ||
424 | return 0; | |
425 | ||
426 | out_volumes: | |
427 | kill_volumes(ubi); | |
428 | out_sysfs: | |
429 | ubi_sysfs_close(ubi); | |
430 | cdev_del(&ubi->cdev); | |
431 | out_unreg: | |
432 | unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1); | |
433 | ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err); | |
434 | return err; | |
435 | } | |
436 | ||
437 | /** | |
438 | * uif_close - close user interfaces for an UBI device. | |
439 | * @ubi: UBI device description object | |
440 | */ | |
441 | static void uif_close(struct ubi_device *ubi) | |
442 | { | |
443 | kill_volumes(ubi); | |
444 | ubi_sysfs_close(ubi); | |
445 | cdev_del(&ubi->cdev); | |
446 | unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1); | |
447 | } | |
448 | ||
449 | /** | |
450 | * attach_by_scanning - attach an MTD device using scanning method. | |
451 | * @ubi: UBI device descriptor | |
452 | * | |
453 | * This function returns zero in case of success and a negative error code in | |
454 | * case of failure. | |
455 | * | |
456 | * Note, currently this is the only method to attach UBI devices. Hopefully in | |
457 | * the future we'll have more scalable attaching methods and avoid full media | |
458 | * scanning. But even in this case scanning will be needed as a fall-back | |
459 | * attaching method if there are some on-flash table corruptions. | |
460 | */ | |
461 | static int attach_by_scanning(struct ubi_device *ubi) | |
462 | { | |
463 | int err; | |
464 | struct ubi_scan_info *si; | |
465 | ||
466 | si = ubi_scan(ubi); | |
467 | if (IS_ERR(si)) | |
468 | return PTR_ERR(si); | |
469 | ||
470 | ubi->bad_peb_count = si->bad_peb_count; | |
471 | ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count; | |
472 | ubi->max_ec = si->max_ec; | |
473 | ubi->mean_ec = si->mean_ec; | |
474 | ||
475 | err = ubi_read_volume_table(ubi, si); | |
476 | if (err) | |
477 | goto out_si; | |
478 | ||
f399d4a2 KP |
479 | err = ubi_eba_init_scan(ubi, si); |
480 | if (err) | |
76c1637e | 481 | goto out_vtbl; |
f399d4a2 | 482 | |
d6389465 HB |
483 | err = ubi_wl_init_scan(ubi, si); |
484 | if (err) | |
76c1637e | 485 | goto out_eba; |
d6389465 | 486 | |
f399d4a2 KP |
487 | ubi_scan_destroy_si(si); |
488 | return 0; | |
489 | ||
76c1637e JH |
490 | out_eba: |
491 | ubi_eba_close(ubi); | |
f399d4a2 KP |
492 | out_vtbl: |
493 | vfree(ubi->vtbl); | |
494 | out_si: | |
495 | ubi_scan_destroy_si(si); | |
496 | return err; | |
497 | } | |
498 | ||
499 | /** | |
500 | * io_init - initialize I/O unit for a given UBI device. | |
501 | * @ubi: UBI device description object | |
502 | * | |
503 | * If @ubi->vid_hdr_offset or @ubi->leb_start is zero, default offsets are | |
504 | * assumed: | |
505 | * o EC header is always at offset zero - this cannot be changed; | |
506 | * o VID header starts just after the EC header at the closest address | |
507 | * aligned to @io->hdrs_min_io_size; | |
508 | * o data starts just after the VID header at the closest address aligned to | |
509 | * @io->min_io_size | |
510 | * | |
511 | * This function returns zero in case of success and a negative error code in | |
512 | * case of failure. | |
513 | */ | |
514 | static int io_init(struct ubi_device *ubi) | |
515 | { | |
516 | if (ubi->mtd->numeraseregions != 0) { | |
517 | /* | |
518 | * Some flashes have several erase regions. Different regions | |
519 | * may have different eraseblock size and other | |
520 | * characteristics. It looks like mostly multi-region flashes | |
521 | * have one "main" region and one or more small regions to | |
522 | * store boot loader code or boot parameters or whatever. I | |
523 | * guess we should just pick the largest region. But this is | |
524 | * not implemented. | |
525 | */ | |
526 | ubi_err("multiple regions, not implemented"); | |
527 | return -EINVAL; | |
528 | } | |
529 | ||
530 | if (ubi->vid_hdr_offset < 0) | |
531 | return -EINVAL; | |
532 | ||
533 | /* | |
534 | * Note, in this implementation we support MTD devices with 0x7FFFFFFF | |
535 | * physical eraseblocks maximum. | |
536 | */ | |
537 | ||
538 | ubi->peb_size = ubi->mtd->erasesize; | |
d318d0c4 | 539 | ubi->peb_count = mtd_div_by_eb(ubi->mtd->size, ubi->mtd); |
f399d4a2 KP |
540 | ubi->flash_size = ubi->mtd->size; |
541 | ||
dfe64e2c | 542 | if (mtd_can_have_bb(ubi->mtd)) |
f399d4a2 KP |
543 | ubi->bad_allowed = 1; |
544 | ||
545 | ubi->min_io_size = ubi->mtd->writesize; | |
546 | ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft; | |
547 | ||
548 | /* | |
549 | * Make sure minimal I/O unit is power of 2. Note, there is no | |
550 | * fundamental reason for this assumption. It is just an optimization | |
551 | * which allows us to avoid costly division operations. | |
552 | */ | |
553 | if (!is_power_of_2(ubi->min_io_size)) { | |
554 | ubi_err("min. I/O unit (%d) is not power of 2", | |
555 | ubi->min_io_size); | |
556 | return -EINVAL; | |
557 | } | |
558 | ||
559 | ubi_assert(ubi->hdrs_min_io_size > 0); | |
560 | ubi_assert(ubi->hdrs_min_io_size <= ubi->min_io_size); | |
561 | ubi_assert(ubi->min_io_size % ubi->hdrs_min_io_size == 0); | |
562 | ||
563 | /* Calculate default aligned sizes of EC and VID headers */ | |
564 | ubi->ec_hdr_alsize = ALIGN(UBI_EC_HDR_SIZE, ubi->hdrs_min_io_size); | |
565 | ubi->vid_hdr_alsize = ALIGN(UBI_VID_HDR_SIZE, ubi->hdrs_min_io_size); | |
566 | ||
567 | dbg_msg("min_io_size %d", ubi->min_io_size); | |
568 | dbg_msg("hdrs_min_io_size %d", ubi->hdrs_min_io_size); | |
569 | dbg_msg("ec_hdr_alsize %d", ubi->ec_hdr_alsize); | |
570 | dbg_msg("vid_hdr_alsize %d", ubi->vid_hdr_alsize); | |
571 | ||
572 | if (ubi->vid_hdr_offset == 0) | |
573 | /* Default offset */ | |
574 | ubi->vid_hdr_offset = ubi->vid_hdr_aloffset = | |
575 | ubi->ec_hdr_alsize; | |
576 | else { | |
577 | ubi->vid_hdr_aloffset = ubi->vid_hdr_offset & | |
578 | ~(ubi->hdrs_min_io_size - 1); | |
579 | ubi->vid_hdr_shift = ubi->vid_hdr_offset - | |
580 | ubi->vid_hdr_aloffset; | |
581 | } | |
582 | ||
583 | /* Similar for the data offset */ | |
584 | ubi->leb_start = ubi->vid_hdr_offset + UBI_EC_HDR_SIZE; | |
585 | ubi->leb_start = ALIGN(ubi->leb_start, ubi->min_io_size); | |
586 | ||
587 | dbg_msg("vid_hdr_offset %d", ubi->vid_hdr_offset); | |
588 | dbg_msg("vid_hdr_aloffset %d", ubi->vid_hdr_aloffset); | |
589 | dbg_msg("vid_hdr_shift %d", ubi->vid_hdr_shift); | |
590 | dbg_msg("leb_start %d", ubi->leb_start); | |
591 | ||
592 | /* The shift must be aligned to 32-bit boundary */ | |
593 | if (ubi->vid_hdr_shift % 4) { | |
594 | ubi_err("unaligned VID header shift %d", | |
595 | ubi->vid_hdr_shift); | |
596 | return -EINVAL; | |
597 | } | |
598 | ||
599 | /* Check sanity */ | |
600 | if (ubi->vid_hdr_offset < UBI_EC_HDR_SIZE || | |
601 | ubi->leb_start < ubi->vid_hdr_offset + UBI_VID_HDR_SIZE || | |
602 | ubi->leb_start > ubi->peb_size - UBI_VID_HDR_SIZE || | |
603 | ubi->leb_start & (ubi->min_io_size - 1)) { | |
604 | ubi_err("bad VID header (%d) or data offsets (%d)", | |
605 | ubi->vid_hdr_offset, ubi->leb_start); | |
606 | return -EINVAL; | |
607 | } | |
608 | ||
609 | /* | |
610 | * It may happen that EC and VID headers are situated in one minimal | |
611 | * I/O unit. In this case we can only accept this UBI image in | |
612 | * read-only mode. | |
613 | */ | |
614 | if (ubi->vid_hdr_offset + UBI_VID_HDR_SIZE <= ubi->hdrs_min_io_size) { | |
615 | ubi_warn("EC and VID headers are in the same minimal I/O unit, " | |
616 | "switch to read-only mode"); | |
617 | ubi->ro_mode = 1; | |
618 | } | |
619 | ||
620 | ubi->leb_size = ubi->peb_size - ubi->leb_start; | |
621 | ||
622 | if (!(ubi->mtd->flags & MTD_WRITEABLE)) { | |
623 | ubi_msg("MTD device %d is write-protected, attach in " | |
624 | "read-only mode", ubi->mtd->index); | |
625 | ubi->ro_mode = 1; | |
626 | } | |
627 | ||
628 | ubi_msg("physical eraseblock size: %d bytes (%d KiB)", | |
629 | ubi->peb_size, ubi->peb_size >> 10); | |
630 | ubi_msg("logical eraseblock size: %d bytes", ubi->leb_size); | |
631 | ubi_msg("smallest flash I/O unit: %d", ubi->min_io_size); | |
632 | if (ubi->hdrs_min_io_size != ubi->min_io_size) | |
633 | ubi_msg("sub-page size: %d", | |
634 | ubi->hdrs_min_io_size); | |
635 | ubi_msg("VID header offset: %d (aligned %d)", | |
636 | ubi->vid_hdr_offset, ubi->vid_hdr_aloffset); | |
637 | ubi_msg("data offset: %d", ubi->leb_start); | |
638 | ||
639 | /* | |
640 | * Note, ideally, we have to initialize ubi->bad_peb_count here. But | |
641 | * unfortunately, MTD does not provide this information. We should loop | |
642 | * over all physical eraseblocks and invoke mtd->block_is_bad() for | |
643 | * each physical eraseblock. So, we skip ubi->bad_peb_count | |
644 | * uninitialized and initialize it after scanning. | |
645 | */ | |
646 | ||
647 | return 0; | |
648 | } | |
649 | ||
650 | /** | |
651 | * autoresize - re-size the volume which has the "auto-resize" flag set. | |
652 | * @ubi: UBI device description object | |
653 | * @vol_id: ID of the volume to re-size | |
654 | * | |
655 | * This function re-sizes the volume marked by the @UBI_VTBL_AUTORESIZE_FLG in | |
656 | * the volume table to the largest possible size. See comments in ubi-header.h | |
657 | * for more description of the flag. Returns zero in case of success and a | |
658 | * negative error code in case of failure. | |
659 | */ | |
660 | static int autoresize(struct ubi_device *ubi, int vol_id) | |
661 | { | |
662 | struct ubi_volume_desc desc; | |
663 | struct ubi_volume *vol = ubi->volumes[vol_id]; | |
664 | int err, old_reserved_pebs = vol->reserved_pebs; | |
665 | ||
666 | /* | |
667 | * Clear the auto-resize flag in the volume in-memory copy of the | |
668 | * volume table, and 'ubi_resize_volume()' will propogate this change | |
669 | * to the flash. | |
670 | */ | |
671 | ubi->vtbl[vol_id].flags &= ~UBI_VTBL_AUTORESIZE_FLG; | |
672 | ||
673 | if (ubi->avail_pebs == 0) { | |
674 | struct ubi_vtbl_record vtbl_rec; | |
675 | ||
676 | /* | |
677 | * No avalilable PEBs to re-size the volume, clear the flag on | |
678 | * flash and exit. | |
679 | */ | |
680 | memcpy(&vtbl_rec, &ubi->vtbl[vol_id], | |
681 | sizeof(struct ubi_vtbl_record)); | |
682 | err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec); | |
683 | if (err) | |
684 | ubi_err("cannot clean auto-resize flag for volume %d", | |
685 | vol_id); | |
686 | } else { | |
687 | desc.vol = vol; | |
688 | err = ubi_resize_volume(&desc, | |
689 | old_reserved_pebs + ubi->avail_pebs); | |
690 | if (err) | |
691 | ubi_err("cannot auto-resize volume %d", vol_id); | |
692 | } | |
693 | ||
694 | if (err) | |
695 | return err; | |
696 | ||
697 | ubi_msg("volume %d (\"%s\") re-sized from %d to %d LEBs", vol_id, | |
698 | vol->name, old_reserved_pebs, vol->reserved_pebs); | |
699 | return 0; | |
700 | } | |
701 | ||
702 | /** | |
703 | * ubi_attach_mtd_dev - attach an MTD device. | |
704 | * @mtd_dev: MTD device description object | |
705 | * @ubi_num: number to assign to the new UBI device | |
706 | * @vid_hdr_offset: VID header offset | |
707 | * | |
708 | * This function attaches MTD device @mtd_dev to UBI and assign @ubi_num number | |
709 | * to the newly created UBI device, unless @ubi_num is %UBI_DEV_NUM_AUTO, in | |
710 | * which case this function finds a vacant device nubert and assings it | |
711 | * automatically. Returns the new UBI device number in case of success and a | |
712 | * negative error code in case of failure. | |
713 | * | |
714 | * Note, the invocations of this function has to be serialized by the | |
715 | * @ubi_devices_mutex. | |
716 | */ | |
717 | int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) | |
718 | { | |
719 | struct ubi_device *ubi; | |
720 | int i, err; | |
721 | ||
722 | /* | |
723 | * Check if we already have the same MTD device attached. | |
724 | * | |
725 | * Note, this function assumes that UBI devices creations and deletions | |
726 | * are serialized, so it does not take the &ubi_devices_lock. | |
727 | */ | |
728 | for (i = 0; i < UBI_MAX_DEVICES; i++) { | |
729 | ubi = ubi_devices[i]; | |
730 | if (ubi && mtd->index == ubi->mtd->index) { | |
731 | dbg_err("mtd%d is already attached to ubi%d", | |
732 | mtd->index, i); | |
733 | return -EEXIST; | |
734 | } | |
735 | } | |
736 | ||
737 | /* | |
738 | * Make sure this MTD device is not emulated on top of an UBI volume | |
739 | * already. Well, generally this recursion works fine, but there are | |
740 | * different problems like the UBI module takes a reference to itself | |
741 | * by attaching (and thus, opening) the emulated MTD device. This | |
742 | * results in inability to unload the module. And in general it makes | |
743 | * no sense to attach emulated MTD devices, so we prohibit this. | |
744 | */ | |
745 | if (mtd->type == MTD_UBIVOLUME) { | |
746 | ubi_err("refuse attaching mtd%d - it is already emulated on " | |
747 | "top of UBI", mtd->index); | |
748 | return -EINVAL; | |
749 | } | |
750 | ||
751 | if (ubi_num == UBI_DEV_NUM_AUTO) { | |
752 | /* Search for an empty slot in the @ubi_devices array */ | |
753 | for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++) | |
754 | if (!ubi_devices[ubi_num]) | |
755 | break; | |
756 | if (ubi_num == UBI_MAX_DEVICES) { | |
757 | dbg_err("only %d UBI devices may be created", UBI_MAX_DEVICES); | |
758 | return -ENFILE; | |
759 | } | |
760 | } else { | |
761 | if (ubi_num >= UBI_MAX_DEVICES) | |
762 | return -EINVAL; | |
763 | ||
764 | /* Make sure ubi_num is not busy */ | |
765 | if (ubi_devices[ubi_num]) { | |
766 | dbg_err("ubi%d already exists", ubi_num); | |
767 | return -EEXIST; | |
768 | } | |
769 | } | |
770 | ||
771 | ubi = kzalloc(sizeof(struct ubi_device), GFP_KERNEL); | |
772 | if (!ubi) | |
773 | return -ENOMEM; | |
774 | ||
775 | ubi->mtd = mtd; | |
776 | ubi->ubi_num = ubi_num; | |
777 | ubi->vid_hdr_offset = vid_hdr_offset; | |
778 | ubi->autoresize_vol_id = -1; | |
779 | ||
780 | mutex_init(&ubi->buf_mutex); | |
781 | mutex_init(&ubi->ckvol_mutex); | |
782 | mutex_init(&ubi->volumes_mutex); | |
783 | spin_lock_init(&ubi->volumes_lock); | |
784 | ||
785 | ubi_msg("attaching mtd%d to ubi%d", mtd->index, ubi_num); | |
786 | ||
787 | err = io_init(ubi); | |
788 | if (err) | |
789 | goto out_free; | |
790 | ||
81732935 | 791 | err = -ENOMEM; |
f399d4a2 KP |
792 | ubi->peb_buf1 = vmalloc(ubi->peb_size); |
793 | if (!ubi->peb_buf1) | |
794 | goto out_free; | |
795 | ||
796 | ubi->peb_buf2 = vmalloc(ubi->peb_size); | |
797 | if (!ubi->peb_buf2) | |
81732935 | 798 | goto out_free; |
f399d4a2 KP |
799 | |
800 | #ifdef CONFIG_MTD_UBI_DEBUG | |
801 | mutex_init(&ubi->dbg_buf_mutex); | |
802 | ubi->dbg_peb_buf = vmalloc(ubi->peb_size); | |
803 | if (!ubi->dbg_peb_buf) | |
81732935 | 804 | goto out_free; |
f399d4a2 KP |
805 | #endif |
806 | ||
807 | err = attach_by_scanning(ubi); | |
808 | if (err) { | |
809 | dbg_err("failed to attach by scanning, error %d", err); | |
810 | goto out_free; | |
811 | } | |
812 | ||
813 | if (ubi->autoresize_vol_id != -1) { | |
814 | err = autoresize(ubi, ubi->autoresize_vol_id); | |
815 | if (err) | |
816 | goto out_detach; | |
817 | } | |
818 | ||
819 | err = uif_init(ubi); | |
820 | if (err) | |
821 | goto out_detach; | |
822 | ||
823 | ubi->bgt_thread = kthread_create(ubi_thread, ubi, ubi->bgt_name); | |
824 | if (IS_ERR(ubi->bgt_thread)) { | |
825 | err = PTR_ERR(ubi->bgt_thread); | |
826 | ubi_err("cannot spawn \"%s\", error %d", ubi->bgt_name, | |
827 | err); | |
828 | goto out_uif; | |
829 | } | |
830 | ||
831 | ubi_msg("attached mtd%d to ubi%d", mtd->index, ubi_num); | |
832 | ubi_msg("MTD device name: \"%s\"", mtd->name); | |
833 | ubi_msg("MTD device size: %llu MiB", ubi->flash_size >> 20); | |
834 | ubi_msg("number of good PEBs: %d", ubi->good_peb_count); | |
835 | ubi_msg("number of bad PEBs: %d", ubi->bad_peb_count); | |
836 | ubi_msg("max. allowed volumes: %d", ubi->vtbl_slots); | |
837 | ubi_msg("wear-leveling threshold: %d", CONFIG_MTD_UBI_WL_THRESHOLD); | |
838 | ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT); | |
839 | ubi_msg("number of user volumes: %d", | |
840 | ubi->vol_count - UBI_INT_VOL_COUNT); | |
841 | ubi_msg("available PEBs: %d", ubi->avail_pebs); | |
842 | ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs); | |
843 | ubi_msg("number of PEBs reserved for bad PEB handling: %d", | |
844 | ubi->beb_rsvd_pebs); | |
845 | ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec); | |
846 | ||
847 | /* Enable the background thread */ | |
848 | if (!DBG_DISABLE_BGT) { | |
849 | ubi->thread_enabled = 1; | |
850 | wake_up_process(ubi->bgt_thread); | |
851 | } | |
852 | ||
853 | ubi_devices[ubi_num] = ubi; | |
854 | return ubi_num; | |
855 | ||
856 | out_uif: | |
857 | uif_close(ubi); | |
858 | out_detach: | |
859 | ubi_eba_close(ubi); | |
860 | ubi_wl_close(ubi); | |
861 | vfree(ubi->vtbl); | |
862 | out_free: | |
863 | vfree(ubi->peb_buf1); | |
864 | vfree(ubi->peb_buf2); | |
865 | #ifdef CONFIG_MTD_UBI_DEBUG | |
866 | vfree(ubi->dbg_peb_buf); | |
867 | #endif | |
868 | kfree(ubi); | |
869 | return err; | |
870 | } | |
871 | ||
872 | /** | |
873 | * ubi_detach_mtd_dev - detach an MTD device. | |
874 | * @ubi_num: UBI device number to detach from | |
875 | * @anyway: detach MTD even if device reference count is not zero | |
876 | * | |
877 | * This function destroys an UBI device number @ubi_num and detaches the | |
878 | * underlying MTD device. Returns zero in case of success and %-EBUSY if the | |
879 | * UBI device is busy and cannot be destroyed, and %-EINVAL if it does not | |
880 | * exist. | |
881 | * | |
882 | * Note, the invocations of this function has to be serialized by the | |
883 | * @ubi_devices_mutex. | |
884 | */ | |
885 | int ubi_detach_mtd_dev(int ubi_num, int anyway) | |
886 | { | |
887 | struct ubi_device *ubi; | |
888 | ||
889 | if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES) | |
890 | return -EINVAL; | |
891 | ||
892 | spin_lock(&ubi_devices_lock); | |
893 | ubi = ubi_devices[ubi_num]; | |
894 | if (!ubi) { | |
895 | spin_unlock(&ubi_devices_lock); | |
896 | return -EINVAL; | |
897 | } | |
898 | ||
899 | if (ubi->ref_count) { | |
900 | if (!anyway) { | |
901 | spin_unlock(&ubi_devices_lock); | |
902 | return -EBUSY; | |
903 | } | |
904 | /* This may only happen if there is a bug */ | |
905 | ubi_err("%s reference count %d, destroy anyway", | |
906 | ubi->ubi_name, ubi->ref_count); | |
907 | } | |
908 | ubi_devices[ubi_num] = NULL; | |
909 | spin_unlock(&ubi_devices_lock); | |
910 | ||
911 | ubi_assert(ubi_num == ubi->ubi_num); | |
912 | dbg_msg("detaching mtd%d from ubi%d", ubi->mtd->index, ubi_num); | |
913 | ||
914 | /* | |
915 | * Before freeing anything, we have to stop the background thread to | |
916 | * prevent it from doing anything on this device while we are freeing. | |
917 | */ | |
918 | if (ubi->bgt_thread) | |
919 | kthread_stop(ubi->bgt_thread); | |
920 | ||
921 | uif_close(ubi); | |
922 | ubi_eba_close(ubi); | |
923 | ubi_wl_close(ubi); | |
924 | vfree(ubi->vtbl); | |
925 | put_mtd_device(ubi->mtd); | |
926 | vfree(ubi->peb_buf1); | |
927 | vfree(ubi->peb_buf2); | |
928 | #ifdef CONFIG_MTD_UBI_DEBUG | |
929 | vfree(ubi->dbg_peb_buf); | |
930 | #endif | |
931 | ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num); | |
932 | kfree(ubi); | |
933 | return 0; | |
934 | } | |
935 | ||
936 | /** | |
937 | * find_mtd_device - open an MTD device by its name or number. | |
938 | * @mtd_dev: name or number of the device | |
939 | * | |
940 | * This function tries to open and MTD device described by @mtd_dev string, | |
941 | * which is first treated as an ASCII number, and if it is not true, it is | |
942 | * treated as MTD device name. Returns MTD device description object in case of | |
943 | * success and a negative error code in case of failure. | |
944 | */ | |
945 | static struct mtd_info * __init open_mtd_device(const char *mtd_dev) | |
946 | { | |
947 | struct mtd_info *mtd; | |
948 | int mtd_num; | |
949 | char *endp; | |
950 | ||
951 | mtd_num = simple_strtoul(mtd_dev, &endp, 0); | |
952 | if (*endp != '\0' || mtd_dev == endp) { | |
953 | /* | |
954 | * This does not look like an ASCII integer, probably this is | |
955 | * MTD device name. | |
956 | */ | |
957 | mtd = get_mtd_device_nm(mtd_dev); | |
958 | } else | |
959 | mtd = get_mtd_device(NULL, mtd_num); | |
960 | ||
961 | return mtd; | |
962 | } | |
963 | ||
964 | int __init ubi_init(void) | |
965 | { | |
966 | int err, i, k; | |
967 | ||
968 | /* Ensure that EC and VID headers have correct size */ | |
969 | BUILD_BUG_ON(sizeof(struct ubi_ec_hdr) != 64); | |
970 | BUILD_BUG_ON(sizeof(struct ubi_vid_hdr) != 64); | |
971 | ||
972 | if (mtd_devs > UBI_MAX_DEVICES) { | |
973 | ubi_err("too many MTD devices, maximum is %d", UBI_MAX_DEVICES); | |
974 | return -EINVAL; | |
975 | } | |
976 | ||
977 | /* Create base sysfs directory and sysfs files */ | |
978 | ubi_class = class_create(THIS_MODULE, UBI_NAME_STR); | |
979 | if (IS_ERR(ubi_class)) { | |
980 | err = PTR_ERR(ubi_class); | |
981 | ubi_err("cannot create UBI class"); | |
982 | goto out; | |
983 | } | |
984 | ||
985 | err = class_create_file(ubi_class, &ubi_version); | |
986 | if (err) { | |
987 | ubi_err("cannot create sysfs file"); | |
988 | goto out_class; | |
989 | } | |
990 | ||
991 | err = misc_register(&ubi_ctrl_cdev); | |
992 | if (err) { | |
993 | ubi_err("cannot register device"); | |
994 | goto out_version; | |
995 | } | |
996 | ||
997 | #ifdef UBI_LINUX | |
998 | ubi_wl_entry_slab = kmem_cache_create("ubi_wl_entry_slab", | |
999 | sizeof(struct ubi_wl_entry), | |
1000 | 0, 0, NULL); | |
1001 | if (!ubi_wl_entry_slab) | |
1002 | goto out_dev_unreg; | |
1003 | #endif | |
1004 | ||
1005 | /* Attach MTD devices */ | |
1006 | for (i = 0; i < mtd_devs; i++) { | |
1007 | struct mtd_dev_param *p = &mtd_dev_param[i]; | |
1008 | struct mtd_info *mtd; | |
1009 | ||
1010 | cond_resched(); | |
1011 | ||
1012 | mtd = open_mtd_device(p->name); | |
1013 | if (IS_ERR(mtd)) { | |
1014 | err = PTR_ERR(mtd); | |
1015 | goto out_detach; | |
1016 | } | |
1017 | ||
1018 | mutex_lock(&ubi_devices_mutex); | |
1019 | err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, | |
1020 | p->vid_hdr_offs); | |
1021 | mutex_unlock(&ubi_devices_mutex); | |
1022 | if (err < 0) { | |
1023 | put_mtd_device(mtd); | |
1024 | ubi_err("cannot attach mtd%d", mtd->index); | |
1025 | goto out_detach; | |
1026 | } | |
1027 | } | |
1028 | ||
1029 | return 0; | |
1030 | ||
1031 | out_detach: | |
1032 | for (k = 0; k < i; k++) | |
1033 | if (ubi_devices[k]) { | |
1034 | mutex_lock(&ubi_devices_mutex); | |
1035 | ubi_detach_mtd_dev(ubi_devices[k]->ubi_num, 1); | |
1036 | mutex_unlock(&ubi_devices_mutex); | |
1037 | } | |
1038 | #ifdef UBI_LINUX | |
1039 | kmem_cache_destroy(ubi_wl_entry_slab); | |
1040 | out_dev_unreg: | |
1041 | #endif | |
1042 | misc_deregister(&ubi_ctrl_cdev); | |
1043 | out_version: | |
1044 | class_remove_file(ubi_class, &ubi_version); | |
1045 | out_class: | |
1046 | class_destroy(ubi_class); | |
1047 | out: | |
86af10ca | 1048 | mtd_devs = 0; |
f399d4a2 KP |
1049 | ubi_err("UBI error: cannot initialize UBI, error %d", err); |
1050 | return err; | |
1051 | } | |
1052 | module_init(ubi_init); | |
1053 | ||
1054 | void __exit ubi_exit(void) | |
1055 | { | |
1056 | int i; | |
1057 | ||
1058 | for (i = 0; i < UBI_MAX_DEVICES; i++) | |
1059 | if (ubi_devices[i]) { | |
1060 | mutex_lock(&ubi_devices_mutex); | |
1061 | ubi_detach_mtd_dev(ubi_devices[i]->ubi_num, 1); | |
1062 | mutex_unlock(&ubi_devices_mutex); | |
1063 | } | |
1064 | kmem_cache_destroy(ubi_wl_entry_slab); | |
1065 | misc_deregister(&ubi_ctrl_cdev); | |
1066 | class_remove_file(ubi_class, &ubi_version); | |
1067 | class_destroy(ubi_class); | |
2ee951ba | 1068 | mtd_devs = 0; |
f399d4a2 KP |
1069 | } |
1070 | module_exit(ubi_exit); | |
1071 | ||
1072 | /** | |
1073 | * bytes_str_to_int - convert a string representing number of bytes to an | |
1074 | * integer. | |
1075 | * @str: the string to convert | |
1076 | * | |
1077 | * This function returns positive resulting integer in case of success and a | |
1078 | * negative error code in case of failure. | |
1079 | */ | |
1080 | static int __init bytes_str_to_int(const char *str) | |
1081 | { | |
1082 | char *endp; | |
1083 | unsigned long result; | |
1084 | ||
1085 | result = simple_strtoul(str, &endp, 0); | |
1086 | if (str == endp || result < 0) { | |
1087 | printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n", | |
1088 | str); | |
1089 | return -EINVAL; | |
1090 | } | |
1091 | ||
1092 | switch (*endp) { | |
1093 | case 'G': | |
1094 | result *= 1024; | |
1095 | case 'M': | |
1096 | result *= 1024; | |
1097 | case 'K': | |
1098 | result *= 1024; | |
1099 | if (endp[1] == 'i' && endp[2] == 'B') | |
1100 | endp += 2; | |
1101 | case '\0': | |
1102 | break; | |
1103 | default: | |
1104 | printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n", | |
1105 | str); | |
1106 | return -EINVAL; | |
1107 | } | |
1108 | ||
1109 | return result; | |
1110 | } | |
1111 | ||
1112 | /** | |
1113 | * ubi_mtd_param_parse - parse the 'mtd=' UBI parameter. | |
1114 | * @val: the parameter value to parse | |
1115 | * @kp: not used | |
1116 | * | |
1117 | * This function returns zero in case of success and a negative error code in | |
1118 | * case of error. | |
1119 | */ | |
1120 | int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp) | |
1121 | { | |
1122 | int i, len; | |
1123 | struct mtd_dev_param *p; | |
1124 | char buf[MTD_PARAM_LEN_MAX]; | |
1125 | char *pbuf = &buf[0]; | |
1126 | char *tokens[2] = {NULL, NULL}; | |
1127 | ||
1128 | if (!val) | |
1129 | return -EINVAL; | |
1130 | ||
1131 | if (mtd_devs == UBI_MAX_DEVICES) { | |
1132 | printk(KERN_ERR "UBI error: too many parameters, max. is %d\n", | |
1133 | UBI_MAX_DEVICES); | |
1134 | return -EINVAL; | |
1135 | } | |
1136 | ||
1137 | len = strnlen(val, MTD_PARAM_LEN_MAX); | |
1138 | if (len == MTD_PARAM_LEN_MAX) { | |
1139 | printk(KERN_ERR "UBI error: parameter \"%s\" is too long, " | |
1140 | "max. is %d\n", val, MTD_PARAM_LEN_MAX); | |
1141 | return -EINVAL; | |
1142 | } | |
1143 | ||
1144 | if (len == 0) { | |
1145 | printk(KERN_WARNING "UBI warning: empty 'mtd=' parameter - " | |
1146 | "ignored\n"); | |
1147 | return 0; | |
1148 | } | |
1149 | ||
1150 | strcpy(buf, val); | |
1151 | ||
1152 | /* Get rid of the final newline */ | |
1153 | if (buf[len - 1] == '\n') | |
1154 | buf[len - 1] = '\0'; | |
1155 | ||
1156 | for (i = 0; i < 2; i++) | |
1157 | tokens[i] = strsep(&pbuf, ","); | |
1158 | ||
1159 | if (pbuf) { | |
1160 | printk(KERN_ERR "UBI error: too many arguments at \"%s\"\n", | |
1161 | val); | |
1162 | return -EINVAL; | |
1163 | } | |
1164 | ||
1165 | p = &mtd_dev_param[mtd_devs]; | |
1166 | strcpy(&p->name[0], tokens[0]); | |
1167 | ||
1168 | if (tokens[1]) | |
1169 | p->vid_hdr_offs = bytes_str_to_int(tokens[1]); | |
1170 | ||
1171 | if (p->vid_hdr_offs < 0) | |
1172 | return p->vid_hdr_offs; | |
1173 | ||
1174 | mtd_devs += 1; | |
1175 | return 0; | |
1176 | } | |
1177 | ||
1178 | module_param_call(mtd, ubi_mtd_param_parse, NULL, NULL, 000); | |
1179 | MODULE_PARM_DESC(mtd, "MTD devices to attach. Parameter format: " | |
1180 | "mtd=<name|num>[,<vid_hdr_offs>].\n" | |
1181 | "Multiple \"mtd\" parameters may be specified.\n" | |
1182 | "MTD devices may be specified by their number or name.\n" | |
1183 | "Optional \"vid_hdr_offs\" parameter specifies UBI VID " | |
1184 | "header position and data starting position to be used " | |
1185 | "by UBI.\n" | |
1186 | "Example: mtd=content,1984 mtd=4 - attach MTD device" | |
1187 | "with name \"content\" using VID header offset 1984, and " | |
1188 | "MTD device number 4 with default VID header offset."); | |
1189 | ||
1190 | MODULE_VERSION(__stringify(UBI_VERSION)); | |
1191 | MODULE_DESCRIPTION("UBI - Unsorted Block Images"); | |
1192 | MODULE_AUTHOR("Artem Bityutskiy"); | |
1193 | MODULE_LICENSE("GPL"); |