[people/ms/u-boot.git] / drivers / net / Kconfig

source "drivers/net/phy/Kconfig"

config DM_ETH
	bool "Enable Driver Model for Ethernet drivers"
	depends on DM
	help
	  Enable driver model for Ethernet.

	  The eth_*() interface will be implemented by the UC_ETH class
	  This is currently implemented in net/eth.c
	  Look in include/net.h for details.

menuconfig NETDEVICES
	bool "Network device support"
	depends on NET
	default y if DM_ETH
	help
	  You must select Y to enable any network device support
	  Generally if you have any networking support this is a given

	  If unsure, say Y

if NETDEVICES

config PHY_GIGE
	bool "Enable GbE PHY status parsing and configuration"
	help
	  Enables support for parsing the status output and for
	  configuring GbE PHYs (affects the inner workings of some
	  commands and miiphyutil.c).

config AG7XXX
	bool "Atheros AG7xxx Ethernet MAC support"
	depends on DM_ETH && ARCH_ATH79
	select PHYLIB
	help
	  This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
	  present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.


config ALTERA_TSE
	bool "Altera Triple-Speed Ethernet MAC support"
	depends on DM_ETH
	select PHYLIB
	help
	  This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
	  Please find details on the "Triple-Speed Ethernet MegaCore Function
	  Resource Center" of Altera.

config DWC_ETH_QOS
	bool "Synopsys DWC Ethernet QOS device support"
	depends on DM_ETH
	select PHYLIB
	help
	  This driver supports the Synopsys Designware Ethernet QOS (Quality
	  Of Service) IP block. The IP supports many options for bus type,
	  clocking/reset structure, and feature list. This driver currently
	  supports the specific configuration used in NVIDIA's Tegra186 chip,
	  but should be extensible to other combinations quite easily.

config E1000
	bool "Intel PRO/1000 Gigabit Ethernet support"
	help
	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
	  adapters.  For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

config E1000_SPI_GENERIC
	bool "Allow access to the Intel 8257x SPI bus"
	depends on E1000
	help
	  Allow generic access to the SPI bus on the Intel 8257x, for
	  example with the "sspi" command.

config E1000_SPI
	bool "Enable SPI bus utility code"
	depends on E1000
	help
	  Utility code for direct access to the SPI bus on Intel 8257x.
	  This does not do anything useful unless you set at least one
	  of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.

config CMD_E1000
	bool "Enable the e1000 command"
	depends on E1000
	help
	  This enables the 'e1000' management command for E1000 devices. When
	  used on devices with SPI support you can reprogram the EEPROM from
	  U-Boot.

config ETH_SANDBOX
	depends on DM_ETH && SANDBOX
	default y
	bool "Sandbox: Mocked Ethernet driver"
	help
	  This driver simply responds with fake ARP replies and ping
	  replies that are used to verify network stack functionality

	  This driver is particularly useful in the test/dm/eth.c tests

config ETH_SANDBOX_RAW
	depends on DM_ETH && SANDBOX
	default y
	bool "Sandbox: Bridge to Linux Raw Sockets"
	help
	  This driver is a bridge from the bottom of the network stack
	  in U-Boot to the RAW AF_PACKET API in Linux. This allows real
	  network traffic to be tested from within sandbox. See
	  board/sandbox/README.sandbox for more details.

config ETH_DESIGNWARE
	bool "Synopsys Designware Ethernet MAC"
	select PHYLIB
	help
	  This MAC is present in SoCs from various vendors. It supports
	  100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
	  provide the PHY (physical media interface).

config ETHOC
	bool "OpenCores 10/100 Mbps Ethernet MAC"
	help
	  This MAC is present in OpenRISC and Xtensa XTFPGA boards.

config FEC_MXC
	bool "FEC Ethernet controller"
	depends on MX5 || MX6
	help
	  This driver supports the 10/100 Fast Ethernet controller for
	  NXP i.MX processors.

config FTMAC100
	bool "Ftmac100 Ethernet Support"
	help
	  This MAC is present in Andestech SoCs.

config MVPP2
	bool "Marvell Armada 375/7K/8K network interface support"
	depends on ARMADA_375 || ARMADA_8K
	select PHYLIB
	help
	  This driver supports the network interface units in the
	  Marvell ARMADA 375, 7K and 8K SoCs.

config MACB
	bool "Cadence MACB/GEM Ethernet Interface"
	depends on DM_ETH
	select PHYLIB
	help
	  The Cadence MACB ethernet interface is found on many Atmel
	  AT91 and SAMA5 parts.  This driver also supports the Cadence
	  GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
	  Say Y to include support for the MACB/GEM chip.

config PCH_GBE
	bool "Intel Platform Controller Hub EG20T GMAC driver"
	depends on DM_ETH && DM_PCI
	select PHYLIB
	help
	  This MAC is present in Intel Platform Controller Hub EG20T. It
	  supports 10/100/1000 Mbps operation.

config RGMII
	bool "Enable RGMII"
	help
	  Enable the support of the Reduced Gigabit Media-Independent
	  Interface (RGMII).

config RTL8139
	bool "Realtek 8139 series Ethernet controller driver"
	help
	  This driver supports Realtek 8139 series fast ethernet family of
	  PCI chipsets/adapters.

config RTL8169
	bool "Realtek 8169 series Ethernet controller driver"
	help
	  This driver supports Realtek 8169 series gigabit ethernet family of
	  PCI/PCIe chipsets/adapters.

config SUN7I_GMAC
	bool "Enable Allwinner GMAC Ethernet support"
	help
	  Enable the support for Sun7i GMAC Ethernet controller

config SUN4I_EMAC
	bool "Allwinner Sun4i Ethernet MAC support"
	depends on DM_ETH
	help
	  This driver supports the Allwinner based SUN4I Ethernet MAC.

config SUN8I_EMAC
        bool "Allwinner Sun8i Ethernet MAC support"
        depends on DM_ETH
        select PHYLIB
	select PHY_GIGE
        help
          This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
	  It can be found in H3/A64/A83T based SoCs and compatible with both
	  External and Internal PHYs.

config XILINX_AXIEMAC
	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
	select PHYLIB
	select MII
	bool "Xilinx AXI Ethernet"
	help
	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.

config XILINX_EMACLITE
	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
	select PHYLIB
	select MII
	bool "Xilinx Ethernetlite"
	help
	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.

config ZYNQ_GEM
	depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
	select PHYLIB
	bool "Xilinx Ethernet GEM"
	help
	  This MAC is present in Xilinx Zynq and ZynqMP SoCs.

config PIC32_ETH
	bool "Microchip PIC32 Ethernet Support"
	depends on DM_ETH && MACH_PIC32
	select PHYLIB
	help
	  This driver implements 10/100 Mbps Ethernet and MAC layer for
	  Microchip PIC32 microcontrollers.

config GMAC_ROCKCHIP
	bool "Rockchip Synopsys Designware Ethernet MAC"
	depends on DM_ETH && ETH_DESIGNWARE
	help
	  This driver provides Rockchip SoCs network support based on the
	  Synopsys Designware driver.

config RENESAS_RAVB
	bool "Renesas Ethernet AVB MAC"
	depends on DM_ETH && RCAR_GEN3
	select PHYLIB
	help
	  This driver implements support for the Ethernet AVB block in
	  Renesas M3 and H3 SoCs.

config MPC8XX_FEC
	bool "Fast Ethernet Controller on MPC8XX"
	depends on 8xx
	select MII
	help
	  This driver implements support for the Fast Ethernet Controller
	  on MPC8XX

config ETHER_ON_FEC1
	bool "FEC1"
	depends on MPC8XX_FEC
	default y

config FEC1_PHY
	int "FEC1 PHY"
	depends on ETHER_ON_FEC1
	default -1
	help
	  Define to the hardcoded PHY address which corresponds
	  to the given FEC; i. e.
		#define CONFIG_FEC1_PHY 4
	  means that the PHY with address 4 is connected to FEC1

	  When set to -1, means to probe for first available.

config PHY_NORXERR
	bool "PHY_NORXERR"
	depends on ETHER_ON_FEC1
	default n
	help
	  The PHY does not have a RXERR line (RMII only).
	  (so program the FEC to ignore it).

config ETHER_ON_FEC2
	bool "FEC2"
	depends on MPC8XX_FEC && MPC885
	default y

config FEC2_PHY
	int "FEC2 PHY"
	depends on ETHER_ON_FEC2
	default -1
	help
	  Define to the hardcoded PHY address which corresponds
	  to the given FEC; i. e.
		#define CONFIG_FEC1_PHY 4
	  means that the PHY with address 4 is connected to FEC1

	  When set to -1, means to probe for first available.

config FEC2_PHY_NORXERR
	bool "PHY_NORXERR"
	depends on ETHER_ON_FEC2
	default n
	help
	  The PHY does not have a RXERR line (RMII only).
	  (so program the FEC to ignore it).

endif # NETDEVICES
Commit	Line	Data
af2cbfd6 A	1	source "drivers/net/phy/Kconfig"
af2cbfd6 A	2
05c3e68f JH	3	config DM_ETH
	4	bool "Enable Driver Model for Ethernet drivers"
	5	depends on DM
	6	help
	7	Enable driver model for Ethernet.
	8
	9	The eth_*() interface will be implemented by the UC_ETH class
	10	This is currently implemented in net/eth.c
	11	Look in include/net.h for details.
3ea143ab JH	12
	13	menuconfig NETDEVICES
	14	bool "Network device support"
	15	depends on NET
ef0f2f57	16	default y if DM_ETH
3ea143ab JH	17	help
	18	You must select Y to enable any network device support
	19	Generally if you have any networking support this is a given
	20
	21	If unsure, say Y
	22
	23	if NETDEVICES
	24
449ea2cd PT	25	config PHY_GIGE
	26	bool "Enable GbE PHY status parsing and configuration"
	27	help
	28	Enables support for parsing the status output and for
	29	configuring GbE PHYs (affects the inner workings of some
	30	commands and miiphyutil.c).
	31
e40095f6 MV	32	config AG7XXX
	33	bool "Atheros AG7xxx Ethernet MAC support"
	34	depends on DM_ETH && ARCH_ATH79
	35	select PHYLIB
	36	help
	37	This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
	38	present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
	39
	40
96fa1e43 TC	41	config ALTERA_TSE
	42	bool "Altera Triple-Speed Ethernet MAC support"
	43	depends on DM_ETH
	44	select PHYLIB
	45	help
	46	This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
	47	Please find details on the "Triple-Speed Ethernet MegaCore Function
	48	Resource Center" of Altera.
	49
ba4dfef1 SW	50	config DWC_ETH_QOS
	51	bool "Synopsys DWC Ethernet QOS device support"
	52	depends on DM_ETH
	53	select PHYLIB
	54	help
	55	This driver supports the Synopsys Designware Ethernet QOS (Quality
	56	Of Service) IP block. The IP supports many options for bus type,
	57	clocking/reset structure, and feature list. This driver currently
	58	supports the specific configuration used in NVIDIA's Tegra186 chip,
	59	but should be extensible to other combinations quite easily.
	60
c294ac5c SG	61	config E1000
	62	bool "Intel PRO/1000 Gigabit Ethernet support"
	63	help
	64	This driver supports Intel(R) PRO/1000 gigabit ethernet family of
	65	adapters. For more information on how to identify your adapter, go
	66	to the Adapter & Driver ID Guide at:
	67
	68	<http://support.intel.com/support/network/adapter/pro100/21397.htm>
	69
	70	config E1000_SPI_GENERIC
	71	bool "Allow access to the Intel 8257x SPI bus"
	72	depends on E1000
	73	help
	74	Allow generic access to the SPI bus on the Intel 8257x, for
	75	example with the "sspi" command.
	76
	77	config E1000_SPI
	78	bool "Enable SPI bus utility code"
	79	depends on E1000
	80	help
	81	Utility code for direct access to the SPI bus on Intel 8257x.
	82	This does not do anything useful unless you set at least one
	83	of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
	84
	85	config CMD_E1000
	86	bool "Enable the e1000 command"
	87	depends on E1000
	88	help
	89	This enables the 'e1000' management command for E1000 devices. When
	90	used on devices with SPI support you can reprogram the EEPROM from
	91	U-Boot.
	92
3ea143ab JH	93	config ETH_SANDBOX
	94	depends on DM_ETH && SANDBOX
	95	default y
	96	bool "Sandbox: Mocked Ethernet driver"
	97	help
	98	This driver simply responds with fake ARP replies and ping
	99	replies that are used to verify network stack functionality
	100
	101	This driver is particularly useful in the test/dm/eth.c tests
	102
a346ca79 JH	103	config ETH_SANDBOX_RAW
	104	depends on DM_ETH && SANDBOX
	105	default y
	106	bool "Sandbox: Bridge to Linux Raw Sockets"
	107	help
	108	This driver is a bridge from the bottom of the network stack
	109	in U-Boot to the RAW AF_PACKET API in Linux. This allows real
	110	network traffic to be tested from within sandbox. See
	111	board/sandbox/README.sandbox for more details.
	112
ef48f6dd SG	113	config ETH_DESIGNWARE
ef48f6dd SG	114	bool "Synopsys Designware Ethernet MAC"
25af71c4	115	select PHYLIB
ef48f6dd SG	116	help
	117	This MAC is present in SoCs from various vendors. It supports
	118	100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
	119	provide the PHY (physical media interface).
	120
f0727120 MF	121	config ETHOC
	122	bool "OpenCores 10/100 Mbps Ethernet MAC"
	123	help
	124	This MAC is present in OpenRISC and Xtensa XTFPGA boards.
	125
97d29ca3 JT	126	config FEC_MXC
97d29ca3 JT	127	bool "FEC Ethernet controller"
98d62e61	128	depends on MX5 \|\| MX6
97d29ca3 JT	129	help
	130	This driver supports the 10/100 Fast Ethernet controller for
	131	NXP i.MX processors.
	132
8dc1b17f TR	133	config FTMAC100
	134	bool "Ftmac100 Ethernet Support"
	135	help
	136	This MAC is present in Andestech SoCs.
	137
99d4c6d3	138	config MVPP2
e7935c47 SR	139	bool "Marvell Armada 375/7K/8K network interface support"
e7935c47 SR	140	depends on ARMADA_375 \|\| ARMADA_8K
99d4c6d3 SR	141	select PHYLIB
	142	help
	143	This driver supports the network interface units in the
e7935c47	144	Marvell ARMADA 375, 7K and 8K SoCs.
99d4c6d3	145
ebcb40a5 WY	146	config MACB
	147	bool "Cadence MACB/GEM Ethernet Interface"
	148	depends on DM_ETH
	149	select PHYLIB
	150	help
	151	The Cadence MACB ethernet interface is found on many Atmel
	152	AT91 and SAMA5 parts. This driver also supports the Cadence
	153	GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
	154	Say Y to include support for the MACB/GEM chip.
	155
b68fe152 BM	156	config PCH_GBE
	157	bool "Intel Platform Controller Hub EG20T GMAC driver"
	158	depends on DM_ETH && DM_PCI
	159	select PHYLIB
	160	help
	161	This MAC is present in Intel Platform Controller Hub EG20T. It
	162	supports 10/100/1000 Mbps operation.
	163
751b0be0 MJ	164	config RGMII
	165	bool "Enable RGMII"
	166	help
	167	Enable the support of the Reduced Gigabit Media-Independent
	168	Interface (RGMII).
	169
86e9dc86 BM	170	config RTL8139
	171	bool "Realtek 8139 series Ethernet controller driver"
	172	help
	173	This driver supports Realtek 8139 series fast ethernet family of
	174	PCI chipsets/adapters.
	175
0764f24a BM	176	config RTL8169
	177	bool "Realtek 8169 series Ethernet controller driver"
	178	help
	179	This driver supports Realtek 8169 series gigabit ethernet family of
	180	PCI/PCIe chipsets/adapters.
	181
4d43d065 MJ	182	config SUN7I_GMAC
	183	bool "Enable Allwinner GMAC Ethernet support"
	184	help
	185	Enable the support for Sun7i GMAC Ethernet controller
	186
abc3e4df MJ	187	config SUN4I_EMAC
	188	bool "Allwinner Sun4i Ethernet MAC support"
	189	depends on DM_ETH
	190	help
	191	This driver supports the Allwinner based SUN4I Ethernet MAC.
	192
a29710c5 AST	193	config SUN8I_EMAC
	194	bool "Allwinner Sun8i Ethernet MAC support"
	195	depends on DM_ETH
	196	select PHYLIB
449ea2cd	197	select PHY_GIGE
a29710c5 AST	198	help
	199	This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
	200	It can be found in H3/A64/A83T based SoCs and compatible with both
7131d2d0	201	External and Internal PHYs.
a29710c5	202
338a5f2b MS	203	config XILINX_AXIEMAC
	204	depends on DM_ETH && (MICROBLAZE \|\| ARCH_ZYNQ \|\| ARCH_ZYNQMP)
	205	select PHYLIB
	206	select MII
	207	bool "Xilinx AXI Ethernet"
	208	help
	209	This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
	210
3229c869	211	config XILINX_EMACLITE
2f1f05f4	212	depends on DM_ETH && (MICROBLAZE \|\| ARCH_ZYNQ \|\| ARCH_ZYNQMP \|\| MIPS)
3229c869 MS	213	select PHYLIB
	214	select MII
	215	bool "Xilinx Ethernetlite"
	216	help
	217	This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
	218
596e5782 MS	219	config ZYNQ_GEM
596e5782 MS	220	depends on DM_ETH && (ARCH_ZYNQ \|\| ARCH_ZYNQMP)
7bccc75a	221	select PHYLIB
596e5782 MS	222	bool "Xilinx Ethernet GEM"
596e5782 MS	223	help
c9428107	224	This MAC is present in Xilinx Zynq and ZynqMP SoCs.
596e5782	225
23e7578c PCM	226	config PIC32_ETH
	227	bool "Microchip PIC32 Ethernet Support"
	228	depends on DM_ETH && MACH_PIC32
	229	select PHYLIB
	230	help
	231	This driver implements 10/100 Mbps Ethernet and MAC layer for
	232	Microchip PIC32 microcontrollers.
	233
0125bcf0 SS	234	config GMAC_ROCKCHIP
	235	bool "Rockchip Synopsys Designware Ethernet MAC"
	236	depends on DM_ETH && ETH_DESIGNWARE
	237	help
	238	This driver provides Rockchip SoCs network support based on the
	239	Synopsys Designware driver.
	240
8ae51b6f MV	241	config RENESAS_RAVB
	242	bool "Renesas Ethernet AVB MAC"
	243	depends on DM_ETH && RCAR_GEN3
	244	select PHYLIB
	245	help
	246	This driver implements support for the Ethernet AVB block in
	247	Renesas M3 and H3 SoCs.
	248
fad51ac3 CL	249	config MPC8XX_FEC
	250	bool "Fast Ethernet Controller on MPC8XX"
	251	depends on 8xx
	252	select MII
	253	help
	254	This driver implements support for the Fast Ethernet Controller
	255	on MPC8XX
	256
	257	config ETHER_ON_FEC1
	258	bool "FEC1"
	259	depends on MPC8XX_FEC
	260	default y
	261
	262	config FEC1_PHY
	263	int "FEC1 PHY"
	264	depends on ETHER_ON_FEC1
	265	default -1
	266	help
	267	Define to the hardcoded PHY address which corresponds
	268	to the given FEC; i. e.
	269	#define CONFIG_FEC1_PHY 4
	270	means that the PHY with address 4 is connected to FEC1
	271
	272	When set to -1, means to probe for first available.
	273
	274	config PHY_NORXERR
	275	bool "PHY_NORXERR"
	276	depends on ETHER_ON_FEC1
	277	default n
	278	help
	279	The PHY does not have a RXERR line (RMII only).
	280	(so program the FEC to ignore it).
	281
	282	config ETHER_ON_FEC2
	283	bool "FEC2"
	284	depends on MPC8XX_FEC && MPC885
	285	default y
	286
	287	config FEC2_PHY
	288	int "FEC2 PHY"
	289	depends on ETHER_ON_FEC2
	290	default -1
	291	help
	292	Define to the hardcoded PHY address which corresponds
	293	to the given FEC; i. e.
	294	#define CONFIG_FEC1_PHY 4
	295	means that the PHY with address 4 is connected to FEC1
	296
	297	When set to -1, means to probe for first available.
	298
	299	config FEC2_PHY_NORXERR
	300	bool "PHY_NORXERR"
	301	depends on ETHER_ON_FEC2
	302	default n
	303	help
	304	The PHY does not have a RXERR line (RMII only).
	305	(so program the FEC to ignore it).
	306
3ea143ab	307	endif # NETDEVICES