[people/ms/u-boot.git] / drivers / net / Kconfig

source "drivers/net/phy/Kconfig"

config DM_ETH
	bool "Enable Driver Model for Ethernet drivers"
	depends on DM
	help
	  Enable driver model for Ethernet.

	  The eth_*() interface will be implemented by the UC_ETH class
	  This is currently implemented in net/eth.c
	  Look in include/net.h for details.

menuconfig NETDEVICES
	bool "Network device support"
	depends on NET
	default y if DM_ETH
	help
	  You must select Y to enable any network device support
	  Generally if you have any networking support this is a given

	  If unsure, say Y

if NETDEVICES

config PHY_GIGE
	bool "Enable GbE PHY status parsing and configuration"
	help
	  Enables support for parsing the status output and for
	  configuring GbE PHYs (affects the inner workings of some
	  commands and miiphyutil.c).

config AG7XXX
	bool "Atheros AG7xxx Ethernet MAC support"
	depends on DM_ETH && ARCH_ATH79
	select PHYLIB
	help
	  This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
	  present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.


config ALTERA_TSE
	bool "Altera Triple-Speed Ethernet MAC support"
	depends on DM_ETH
	select PHYLIB
	help
	  This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
	  Please find details on the "Triple-Speed Ethernet MegaCore Function
	  Resource Center" of Altera.

config BCM_SF2_ETH
	bool "Broadcom SF2 (Starfighter2) Ethernet support"
	select PHYLIB
	help
	  This is an abstract framework which provides a generic interface
	  to MAC and DMA management for multiple Broadcom SoCs such as
	  Cygnus, NSP and bcm28155_ap platforms.

config BCM_SF2_ETH_DEFAULT_PORT
	int "Broadcom SF2 (Starfighter2) Ethernet default port number"
	depends on BCM_SF2_ETH
	default 0
	help
	  Default port number for the Starfighter2 ethernet driver.

config BCM_SF2_ETH_GMAC
	bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
	depends on BCM_SF2_ETH
	help
	  This flag enables the ethernet support for Broadcom platforms with
	  GMAC such as Cygnus. This driver is based on the framework provided
	  by the BCM_SF2_ETH driver.
	  Say Y to any bcmcygnus based platforms.

config DWC_ETH_QOS
	bool "Synopsys DWC Ethernet QOS device support"
	depends on DM_ETH
	select PHYLIB
	help
	  This driver supports the Synopsys Designware Ethernet QOS (Quality
	  Of Service) IP block. The IP supports many options for bus type,
	  clocking/reset structure, and feature list. This driver currently
	  supports the specific configuration used in NVIDIA's Tegra186 chip,
	  but should be extensible to other combinations quite easily.

config E1000
	bool "Intel PRO/1000 Gigabit Ethernet support"
	help
	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
	  adapters.  For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

config E1000_SPI_GENERIC
	bool "Allow access to the Intel 8257x SPI bus"
	depends on E1000
	help
	  Allow generic access to the SPI bus on the Intel 8257x, for
	  example with the "sspi" command.

config E1000_SPI
	bool "Enable SPI bus utility code"
	depends on E1000
	help
	  Utility code for direct access to the SPI bus on Intel 8257x.
	  This does not do anything useful unless you set at least one
	  of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.

config CMD_E1000
	bool "Enable the e1000 command"
	depends on E1000
	help
	  This enables the 'e1000' management command for E1000 devices. When
	  used on devices with SPI support you can reprogram the EEPROM from
	  U-Boot.

config ETH_SANDBOX
	depends on DM_ETH && SANDBOX
	default y
	bool "Sandbox: Mocked Ethernet driver"
	help
	  This driver simply responds with fake ARP replies and ping
	  replies that are used to verify network stack functionality

	  This driver is particularly useful in the test/dm/eth.c tests

config ETH_SANDBOX_RAW
	depends on DM_ETH && SANDBOX
	default y
	bool "Sandbox: Bridge to Linux Raw Sockets"
	help
	  This driver is a bridge from the bottom of the network stack
	  in U-Boot to the RAW AF_PACKET API in Linux. This allows real
	  network traffic to be tested from within sandbox. See
	  board/sandbox/README.sandbox for more details.

config ETH_DESIGNWARE
	bool "Synopsys Designware Ethernet MAC"
	select PHYLIB
	help
	  This MAC is present in SoCs from various vendors. It supports
	  100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
	  provide the PHY (physical media interface).

config ETHOC
	bool "OpenCores 10/100 Mbps Ethernet MAC"
	help
	  This MAC is present in OpenRISC and Xtensa XTFPGA boards.

config FEC_MXC
	bool "FEC Ethernet controller"
	depends on MX5 || MX6
	help
	  This driver supports the 10/100 Fast Ethernet controller for
	  NXP i.MX processors.

config FTMAC100
	bool "Ftmac100 Ethernet Support"
	help
	  This MAC is present in Andestech SoCs.

config MVNETA
	bool "Marvell Armada 385 network interface support"
	depends on ARMADA_XP || ARMADA_38X
	select PHYLIB
	help
	  This driver supports the network interface units in the
	  Marvell ARMADA XP and 38X SoCs

config MVPP2
	bool "Marvell Armada 375/7K/8K network interface support"
	depends on ARMADA_375 || ARMADA_8K
	select PHYLIB
	help
	  This driver supports the network interface units in the
	  Marvell ARMADA 375, 7K and 8K SoCs.

config MACB
	bool "Cadence MACB/GEM Ethernet Interface"
	depends on DM_ETH
	select PHYLIB
	help
	  The Cadence MACB ethernet interface is found on many Atmel
	  AT91 and SAMA5 parts.  This driver also supports the Cadence
	  GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
	  Say Y to include support for the MACB/GEM chip.

config PCH_GBE
	bool "Intel Platform Controller Hub EG20T GMAC driver"
	depends on DM_ETH && DM_PCI
	select PHYLIB
	help
	  This MAC is present in Intel Platform Controller Hub EG20T. It
	  supports 10/100/1000 Mbps operation.

config RGMII
	bool "Enable RGMII"
	help
	  Enable the support of the Reduced Gigabit Media-Independent
	  Interface (RGMII).

config RTL8139
	bool "Realtek 8139 series Ethernet controller driver"
	help
	  This driver supports Realtek 8139 series fast ethernet family of
	  PCI chipsets/adapters.

config RTL8169
	bool "Realtek 8169 series Ethernet controller driver"
	help
	  This driver supports Realtek 8169 series gigabit ethernet family of
	  PCI/PCIe chipsets/adapters.

config SMC911X
	bool "SMSC LAN911x and LAN921x controller driver"

if SMC911X

config SMC911X_BASE
	hex "SMC911X Base Address"
	help
	  Define this to hold the physical address
	  of the device (I/O space)

choice
	prompt "SMC911X bus width"
	default SMC911X_16_BIT

config SMC911X_32_BIT
	bool "Enable 32-bit interface"

config SMC911X_16_BIT
	bool "Enable 16-bit interface"
	help
	  Define this if data bus is 16 bits. If your processor
	  automatically converts one 32 bit word to two 16 bit
	  words you may also try CONFIG_SMC911X_32_BIT.

endchoice
endif #SMC911X

config SUN7I_GMAC
	bool "Enable Allwinner GMAC Ethernet support"
	help
	  Enable the support for Sun7i GMAC Ethernet controller

config SUN7I_GMAC_FORCE_TXERR
	bool "Force PA17 as gmac function"
	depends on SUN7I_GMAC
	help
	  Some ethernet phys needs TXERR control. Since the GMAC
	  doesn't have such signal, setting PA17 as GMAC function
	  makes the pin output low, which enables data transmission.

config SUN4I_EMAC
	bool "Allwinner Sun4i Ethernet MAC support"
	depends on DM_ETH
	select PHYLIB
	help
	  This driver supports the Allwinner based SUN4I Ethernet MAC.

config SUN8I_EMAC
        bool "Allwinner Sun8i Ethernet MAC support"
        depends on DM_ETH
        select PHYLIB
	select PHY_GIGE
        help
          This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
	  It can be found in H3/A64/A83T based SoCs and compatible with both
	  External and Internal PHYs.

config XILINX_AXIEMAC
	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
	select PHYLIB
	select MII
	bool "Xilinx AXI Ethernet"
	help
	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.

config XILINX_EMACLITE
	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
	select PHYLIB
	select MII
	bool "Xilinx Ethernetlite"
	help
	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.

config ZYNQ_GEM
	depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
	select PHYLIB
	bool "Xilinx Ethernet GEM"
	help
	  This MAC is present in Xilinx Zynq and ZynqMP SoCs.

config PIC32_ETH
	bool "Microchip PIC32 Ethernet Support"
	depends on DM_ETH && MACH_PIC32
	select PHYLIB
	help
	  This driver implements 10/100 Mbps Ethernet and MAC layer for
	  Microchip PIC32 microcontrollers.

config GMAC_ROCKCHIP
	bool "Rockchip Synopsys Designware Ethernet MAC"
	depends on DM_ETH && ETH_DESIGNWARE
	help
	  This driver provides Rockchip SoCs network support based on the
	  Synopsys Designware driver.

config RENESAS_RAVB
	bool "Renesas Ethernet AVB MAC"
	depends on DM_ETH && RCAR_GEN3
	select PHYLIB
	help
	  This driver implements support for the Ethernet AVB block in
	  Renesas M3 and H3 SoCs.

config MPC8XX_FEC
	bool "Fast Ethernet Controller on MPC8XX"
	depends on 8xx
	select MII
	help
	  This driver implements support for the Fast Ethernet Controller
	  on MPC8XX

config ETHER_ON_FEC1
	bool "FEC1"
	depends on MPC8XX_FEC
	default y

config FEC1_PHY
	int "FEC1 PHY"
	depends on ETHER_ON_FEC1
	default -1
	help
	  Define to the hardcoded PHY address which corresponds
	  to the given FEC; i. e.
		#define CONFIG_FEC1_PHY 4
	  means that the PHY with address 4 is connected to FEC1

	  When set to -1, means to probe for first available.

config PHY_NORXERR
	bool "PHY_NORXERR"
	depends on ETHER_ON_FEC1
	default n
	help
	  The PHY does not have a RXERR line (RMII only).
	  (so program the FEC to ignore it).

config ETHER_ON_FEC2
	bool "FEC2"
	depends on MPC8XX_FEC && MPC885
	default y

config FEC2_PHY
	int "FEC2 PHY"
	depends on ETHER_ON_FEC2
	default -1
	help
	  Define to the hardcoded PHY address which corresponds
	  to the given FEC; i. e.
		#define CONFIG_FEC1_PHY 4
	  means that the PHY with address 4 is connected to FEC1

	  When set to -1, means to probe for first available.

config FEC2_PHY_NORXERR
	bool "PHY_NORXERR"
	depends on ETHER_ON_FEC2
	default n
	help
	  The PHY does not have a RXERR line (RMII only).
	  (so program the FEC to ignore it).

endif # NETDEVICES
Commit	Line	Data
af2cbfd6 A	1	source "drivers/net/phy/Kconfig"
af2cbfd6 A	2
05c3e68f JH	3	config DM_ETH
	4	bool "Enable Driver Model for Ethernet drivers"
	5	depends on DM
	6	help
	7	Enable driver model for Ethernet.
	8
	9	The eth_*() interface will be implemented by the UC_ETH class
	10	This is currently implemented in net/eth.c
	11	Look in include/net.h for details.
3ea143ab JH	12
	13	menuconfig NETDEVICES
	14	bool "Network device support"
	15	depends on NET
ef0f2f57	16	default y if DM_ETH
3ea143ab JH	17	help
	18	You must select Y to enable any network device support
	19	Generally if you have any networking support this is a given
	20
	21	If unsure, say Y
	22
	23	if NETDEVICES
	24
449ea2cd PT	25	config PHY_GIGE
	26	bool "Enable GbE PHY status parsing and configuration"
	27	help
	28	Enables support for parsing the status output and for
	29	configuring GbE PHYs (affects the inner workings of some
	30	commands and miiphyutil.c).
	31
e40095f6 MV	32	config AG7XXX
	33	bool "Atheros AG7xxx Ethernet MAC support"
	34	depends on DM_ETH && ARCH_ATH79
	35	select PHYLIB
	36	help
	37	This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
	38	present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
	39
	40
96fa1e43 TC	41	config ALTERA_TSE
	42	bool "Altera Triple-Speed Ethernet MAC support"
	43	depends on DM_ETH
	44	select PHYLIB
	45	help
	46	This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
	47	Please find details on the "Triple-Speed Ethernet MegaCore Function
	48	Resource Center" of Altera.
	49
c89782dc SV	50	config BCM_SF2_ETH
	51	bool "Broadcom SF2 (Starfighter2) Ethernet support"
	52	select PHYLIB
	53	help
	54	This is an abstract framework which provides a generic interface
	55	to MAC and DMA management for multiple Broadcom SoCs such as
	56	Cygnus, NSP and bcm28155_ap platforms.
	57
	58	config BCM_SF2_ETH_DEFAULT_PORT
	59	int "Broadcom SF2 (Starfighter2) Ethernet default port number"
	60	depends on BCM_SF2_ETH
	61	default 0
	62	help
	63	Default port number for the Starfighter2 ethernet driver.
	64
	65	config BCM_SF2_ETH_GMAC
	66	bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
	67	depends on BCM_SF2_ETH
	68	help
	69	This flag enables the ethernet support for Broadcom platforms with
	70	GMAC such as Cygnus. This driver is based on the framework provided
	71	by the BCM_SF2_ETH driver.
	72	Say Y to any bcmcygnus based platforms.
	73
ba4dfef1 SW	74	config DWC_ETH_QOS
	75	bool "Synopsys DWC Ethernet QOS device support"
	76	depends on DM_ETH
	77	select PHYLIB
	78	help
	79	This driver supports the Synopsys Designware Ethernet QOS (Quality
	80	Of Service) IP block. The IP supports many options for bus type,
	81	clocking/reset structure, and feature list. This driver currently
	82	supports the specific configuration used in NVIDIA's Tegra186 chip,
	83	but should be extensible to other combinations quite easily.
	84
c294ac5c SG	85	config E1000
	86	bool "Intel PRO/1000 Gigabit Ethernet support"
	87	help
	88	This driver supports Intel(R) PRO/1000 gigabit ethernet family of
	89	adapters. For more information on how to identify your adapter, go
	90	to the Adapter & Driver ID Guide at:
	91
	92	<http://support.intel.com/support/network/adapter/pro100/21397.htm>
	93
	94	config E1000_SPI_GENERIC
	95	bool "Allow access to the Intel 8257x SPI bus"
	96	depends on E1000
	97	help
	98	Allow generic access to the SPI bus on the Intel 8257x, for
	99	example with the "sspi" command.
	100
	101	config E1000_SPI
	102	bool "Enable SPI bus utility code"
	103	depends on E1000
	104	help
	105	Utility code for direct access to the SPI bus on Intel 8257x.
	106	This does not do anything useful unless you set at least one
	107	of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
	108
	109	config CMD_E1000
	110	bool "Enable the e1000 command"
	111	depends on E1000
	112	help
	113	This enables the 'e1000' management command for E1000 devices. When
	114	used on devices with SPI support you can reprogram the EEPROM from
	115	U-Boot.
	116
3ea143ab JH	117	config ETH_SANDBOX
	118	depends on DM_ETH && SANDBOX
	119	default y
	120	bool "Sandbox: Mocked Ethernet driver"
	121	help
	122	This driver simply responds with fake ARP replies and ping
	123	replies that are used to verify network stack functionality
	124
	125	This driver is particularly useful in the test/dm/eth.c tests
	126
a346ca79 JH	127	config ETH_SANDBOX_RAW
	128	depends on DM_ETH && SANDBOX
	129	default y
	130	bool "Sandbox: Bridge to Linux Raw Sockets"
	131	help
	132	This driver is a bridge from the bottom of the network stack
	133	in U-Boot to the RAW AF_PACKET API in Linux. This allows real
	134	network traffic to be tested from within sandbox. See
	135	board/sandbox/README.sandbox for more details.
	136
ef48f6dd SG	137	config ETH_DESIGNWARE
ef48f6dd SG	138	bool "Synopsys Designware Ethernet MAC"
25af71c4	139	select PHYLIB
ef48f6dd SG	140	help
	141	This MAC is present in SoCs from various vendors. It supports
	142	100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
	143	provide the PHY (physical media interface).
	144
f0727120 MF	145	config ETHOC
	146	bool "OpenCores 10/100 Mbps Ethernet MAC"
	147	help
	148	This MAC is present in OpenRISC and Xtensa XTFPGA boards.
	149
97d29ca3 JT	150	config FEC_MXC
97d29ca3 JT	151	bool "FEC Ethernet controller"
98d62e61	152	depends on MX5 \|\| MX6
97d29ca3 JT	153	help
	154	This driver supports the 10/100 Fast Ethernet controller for
	155	NXP i.MX processors.
	156
8dc1b17f TR	157	config FTMAC100
	158	bool "Ftmac100 Ethernet Support"
	159	help
	160	This MAC is present in Andestech SoCs.
	161
7654f62f CP	162	config MVNETA
	163	bool "Marvell Armada 385 network interface support"
	164	depends on ARMADA_XP \|\| ARMADA_38X
	165	select PHYLIB
	166	help
	167	This driver supports the network interface units in the
	168	Marvell ARMADA XP and 38X SoCs
	169
99d4c6d3	170	config MVPP2
e7935c47 SR	171	bool "Marvell Armada 375/7K/8K network interface support"
e7935c47 SR	172	depends on ARMADA_375 \|\| ARMADA_8K
99d4c6d3 SR	173	select PHYLIB
	174	help
	175	This driver supports the network interface units in the
e7935c47	176	Marvell ARMADA 375, 7K and 8K SoCs.
99d4c6d3	177
ebcb40a5 WY	178	config MACB
	179	bool "Cadence MACB/GEM Ethernet Interface"
	180	depends on DM_ETH
	181	select PHYLIB
	182	help
	183	The Cadence MACB ethernet interface is found on many Atmel
	184	AT91 and SAMA5 parts. This driver also supports the Cadence
	185	GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
	186	Say Y to include support for the MACB/GEM chip.
	187
b68fe152 BM	188	config PCH_GBE
	189	bool "Intel Platform Controller Hub EG20T GMAC driver"
	190	depends on DM_ETH && DM_PCI
	191	select PHYLIB
	192	help
	193	This MAC is present in Intel Platform Controller Hub EG20T. It
	194	supports 10/100/1000 Mbps operation.
	195
751b0be0 MJ	196	config RGMII
	197	bool "Enable RGMII"
	198	help
	199	Enable the support of the Reduced Gigabit Media-Independent
	200	Interface (RGMII).
	201
86e9dc86 BM	202	config RTL8139
	203	bool "Realtek 8139 series Ethernet controller driver"
	204	help
	205	This driver supports Realtek 8139 series fast ethernet family of
	206	PCI chipsets/adapters.
	207
0764f24a BM	208	config RTL8169
	209	bool "Realtek 8169 series Ethernet controller driver"
	210	help
	211	This driver supports Realtek 8169 series gigabit ethernet family of
	212	PCI/PCIe chipsets/adapters.
	213
8daec2d9 AF	214	config SMC911X
	215	bool "SMSC LAN911x and LAN921x controller driver"
	216
	217	if SMC911X
	218
	219	config SMC911X_BASE
	220	hex "SMC911X Base Address"
	221	help
	222	Define this to hold the physical address
	223	of the device (I/O space)
	224
	225	choice
	226	prompt "SMC911X bus width"
	227	default SMC911X_16_BIT
	228
	229	config SMC911X_32_BIT
	230	bool "Enable 32-bit interface"
	231
	232	config SMC911X_16_BIT
	233	bool "Enable 16-bit interface"
	234	help
	235	Define this if data bus is 16 bits. If your processor
	236	automatically converts one 32 bit word to two 16 bit
	237	words you may also try CONFIG_SMC911X_32_BIT.
	238
	239	endchoice
	240	endif #SMC911X
	241
4d43d065 MJ	242	config SUN7I_GMAC
	243	bool "Enable Allwinner GMAC Ethernet support"
	244	help
	245	Enable the support for Sun7i GMAC Ethernet controller
	246
aba39249 SM	247	config SUN7I_GMAC_FORCE_TXERR
	248	bool "Force PA17 as gmac function"
	249	depends on SUN7I_GMAC
	250	help
	251	Some ethernet phys needs TXERR control. Since the GMAC
	252	doesn't have such signal, setting PA17 as GMAC function
	253	makes the pin output low, which enables data transmission.
	254
abc3e4df MJ	255	config SUN4I_EMAC
	256	bool "Allwinner Sun4i Ethernet MAC support"
	257	depends on DM_ETH
6270a3f0	258	select PHYLIB
abc3e4df MJ	259	help
	260	This driver supports the Allwinner based SUN4I Ethernet MAC.
	261
a29710c5 AST	262	config SUN8I_EMAC
	263	bool "Allwinner Sun8i Ethernet MAC support"
	264	depends on DM_ETH
	265	select PHYLIB
449ea2cd	266	select PHY_GIGE
a29710c5 AST	267	help
	268	This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
	269	It can be found in H3/A64/A83T based SoCs and compatible with both
7131d2d0	270	External and Internal PHYs.
a29710c5	271
338a5f2b MS	272	config XILINX_AXIEMAC
	273	depends on DM_ETH && (MICROBLAZE \|\| ARCH_ZYNQ \|\| ARCH_ZYNQMP)
	274	select PHYLIB
	275	select MII
	276	bool "Xilinx AXI Ethernet"
	277	help
	278	This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
	279
3229c869	280	config XILINX_EMACLITE
2f1f05f4	281	depends on DM_ETH && (MICROBLAZE \|\| ARCH_ZYNQ \|\| ARCH_ZYNQMP \|\| MIPS)
3229c869 MS	282	select PHYLIB
	283	select MII
	284	bool "Xilinx Ethernetlite"
	285	help
	286	This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
	287
596e5782 MS	288	config ZYNQ_GEM
596e5782 MS	289	depends on DM_ETH && (ARCH_ZYNQ \|\| ARCH_ZYNQMP)
7bccc75a	290	select PHYLIB
596e5782 MS	291	bool "Xilinx Ethernet GEM"
596e5782 MS	292	help
c9428107	293	This MAC is present in Xilinx Zynq and ZynqMP SoCs.
596e5782	294
23e7578c PCM	295	config PIC32_ETH
	296	bool "Microchip PIC32 Ethernet Support"
	297	depends on DM_ETH && MACH_PIC32
	298	select PHYLIB
	299	help
	300	This driver implements 10/100 Mbps Ethernet and MAC layer for
	301	Microchip PIC32 microcontrollers.
	302
0125bcf0 SS	303	config GMAC_ROCKCHIP
	304	bool "Rockchip Synopsys Designware Ethernet MAC"
	305	depends on DM_ETH && ETH_DESIGNWARE
	306	help
	307	This driver provides Rockchip SoCs network support based on the
	308	Synopsys Designware driver.
	309
8ae51b6f MV	310	config RENESAS_RAVB
	311	bool "Renesas Ethernet AVB MAC"
	312	depends on DM_ETH && RCAR_GEN3
	313	select PHYLIB
	314	help
	315	This driver implements support for the Ethernet AVB block in
	316	Renesas M3 and H3 SoCs.
	317
fad51ac3 CL	318	config MPC8XX_FEC
	319	bool "Fast Ethernet Controller on MPC8XX"
	320	depends on 8xx
	321	select MII
	322	help
	323	This driver implements support for the Fast Ethernet Controller
	324	on MPC8XX
	325
	326	config ETHER_ON_FEC1
	327	bool "FEC1"
	328	depends on MPC8XX_FEC
	329	default y
	330
	331	config FEC1_PHY
	332	int "FEC1 PHY"
	333	depends on ETHER_ON_FEC1
	334	default -1
	335	help
	336	Define to the hardcoded PHY address which corresponds
	337	to the given FEC; i. e.
	338	#define CONFIG_FEC1_PHY 4
	339	means that the PHY with address 4 is connected to FEC1
	340
	341	When set to -1, means to probe for first available.
	342
	343	config PHY_NORXERR
	344	bool "PHY_NORXERR"
	345	depends on ETHER_ON_FEC1
	346	default n
	347	help
	348	The PHY does not have a RXERR line (RMII only).
	349	(so program the FEC to ignore it).
	350
	351	config ETHER_ON_FEC2
	352	bool "FEC2"
	353	depends on MPC8XX_FEC && MPC885
	354	default y
	355
	356	config FEC2_PHY
	357	int "FEC2 PHY"
	358	depends on ETHER_ON_FEC2
	359	default -1
	360	help
	361	Define to the hardcoded PHY address which corresponds
	362	to the given FEC; i. e.
	363	#define CONFIG_FEC1_PHY 4
	364	means that the PHY with address 4 is connected to FEC1
	365
	366	When set to -1, means to probe for first available.
	367
	368	config FEC2_PHY_NORXERR
	369	bool "PHY_NORXERR"
	370	depends on ETHER_ON_FEC2
	371	default n
	372	help
	373	The PHY does not have a RXERR line (RMII only).
	374	(so program the FEC to ignore it).
	375
3ea143ab	376	endif # NETDEVICES