[people/ms/u-boot.git] / drivers / net / Kconfig

source "drivers/net/phy/Kconfig"

config DM_ETH
	bool "Enable Driver Model for Ethernet drivers"
	depends on DM
	help
	  Enable driver model for Ethernet.

	  The eth_*() interface will be implemented by the UC_ETH class
	  This is currently implemented in net/eth.c
	  Look in include/net.h for details.

menuconfig NETDEVICES
	bool "Network device support"
	depends on NET
	default y if DM_ETH
	help
	  You must select Y to enable any network device support
	  Generally if you have any networking support this is a given

	  If unsure, say Y

if NETDEVICES

config PHY_GIGE
	bool "Enable GbE PHY status parsing and configuration"
	help
	  Enables support for parsing the status output and for
	  configuring GbE PHYs (affects the inner workings of some
	  commands and miiphyutil.c).

config AG7XXX
	bool "Atheros AG7xxx Ethernet MAC support"
	depends on DM_ETH && ARCH_ATH79
	select PHYLIB
	help
	  This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
	  present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.


config ALTERA_TSE
	bool "Altera Triple-Speed Ethernet MAC support"
	depends on DM_ETH
	select PHYLIB
	help
	  This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
	  Please find details on the "Triple-Speed Ethernet MegaCore Function
	  Resource Center" of Altera.

config BCM_SF2_ETH
	bool "Broadcom SF2 (Starfighter2) Ethernet support"
	select PHYLIB
	help
	  This is an abstract framework which provides a generic interface
	  to MAC and DMA management for multiple Broadcom SoCs such as
	  Cygnus, NSP and bcm28155_ap platforms.

config BCM_SF2_ETH_DEFAULT_PORT
	int "Broadcom SF2 (Starfighter2) Ethernet default port number"
	depends on BCM_SF2_ETH
	default 0
	help
	  Default port number for the Starfighter2 ethernet driver.

config BCM_SF2_ETH_GMAC
	bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
	depends on BCM_SF2_ETH
	help
	  This flag enables the ethernet support for Broadcom platforms with
	  GMAC such as Cygnus. This driver is based on the framework provided
	  by the BCM_SF2_ETH driver.
	  Say Y to any bcmcygnus based platforms.

config DWC_ETH_QOS
	bool "Synopsys DWC Ethernet QOS device support"
	depends on DM_ETH
	select PHYLIB
	help
	  This driver supports the Synopsys Designware Ethernet QOS (Quality
	  Of Service) IP block. The IP supports many options for bus type,
	  clocking/reset structure, and feature list. This driver currently
	  supports the specific configuration used in NVIDIA's Tegra186 chip,
	  but should be extensible to other combinations quite easily.

config E1000
	bool "Intel PRO/1000 Gigabit Ethernet support"
	help
	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
	  adapters.  For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

config E1000_SPI_GENERIC
	bool "Allow access to the Intel 8257x SPI bus"
	depends on E1000
	help
	  Allow generic access to the SPI bus on the Intel 8257x, for
	  example with the "sspi" command.

config E1000_SPI
	bool "Enable SPI bus utility code"
	depends on E1000
	help
	  Utility code for direct access to the SPI bus on Intel 8257x.
	  This does not do anything useful unless you set at least one
	  of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.

config CMD_E1000
	bool "Enable the e1000 command"
	depends on E1000
	help
	  This enables the 'e1000' management command for E1000 devices. When
	  used on devices with SPI support you can reprogram the EEPROM from
	  U-Boot.

config ETH_SANDBOX
	depends on DM_ETH && SANDBOX
	default y
	bool "Sandbox: Mocked Ethernet driver"
	help
	  This driver simply responds with fake ARP replies and ping
	  replies that are used to verify network stack functionality

	  This driver is particularly useful in the test/dm/eth.c tests

config ETH_SANDBOX_RAW
	depends on DM_ETH && SANDBOX
	default y
	bool "Sandbox: Bridge to Linux Raw Sockets"
	help
	  This driver is a bridge from the bottom of the network stack
	  in U-Boot to the RAW AF_PACKET API in Linux. This allows real
	  network traffic to be tested from within sandbox. See
	  board/sandbox/README.sandbox for more details.

config ETH_DESIGNWARE
	bool "Synopsys Designware Ethernet MAC"
	select PHYLIB
	help
	  This MAC is present in SoCs from various vendors. It supports
	  100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
	  provide the PHY (physical media interface).

config ETHOC
	bool "OpenCores 10/100 Mbps Ethernet MAC"
	help
	  This MAC is present in OpenRISC and Xtensa XTFPGA boards.

config FEC_MXC
	bool "FEC Ethernet controller"
	depends on MX5 || MX6
	help
	  This driver supports the 10/100 Fast Ethernet controller for
	  NXP i.MX processors.

config FTMAC100
	bool "Ftmac100 Ethernet Support"
	help
	  This MAC is present in Andestech SoCs.

config MVNETA
	bool "Marvell Armada XP/385/3700 network interface support"
	depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
	select PHYLIB
	help
	  This driver supports the network interface units in the
	  Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs

config MVPP2
	bool "Marvell Armada 375/7K/8K network interface support"
	depends on ARMADA_375 || ARMADA_8K
	select PHYLIB
	help
	  This driver supports the network interface units in the
	  Marvell ARMADA 375, 7K and 8K SoCs.

config MACB
	bool "Cadence MACB/GEM Ethernet Interface"
	depends on DM_ETH
	select PHYLIB
	help
	  The Cadence MACB ethernet interface is found on many Atmel
	  AT91 and SAMA5 parts.  This driver also supports the Cadence
	  GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
	  Say Y to include support for the MACB/GEM chip.

config MACB_ZYNQ
	bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
	depends on MACB
	help
	  The Cadence MACB ethernet interface was used on Zynq platform.
	  Say Y to enable support for the MACB/GEM in Zynq chip.

config PCH_GBE
	bool "Intel Platform Controller Hub EG20T GMAC driver"
	depends on DM_ETH && DM_PCI
	select PHYLIB
	help
	  This MAC is present in Intel Platform Controller Hub EG20T. It
	  supports 10/100/1000 Mbps operation.

config RGMII
	bool "Enable RGMII"
	help
	  Enable the support of the Reduced Gigabit Media-Independent
	  Interface (RGMII).

config RTL8139
	bool "Realtek 8139 series Ethernet controller driver"
	help
	  This driver supports Realtek 8139 series fast ethernet family of
	  PCI chipsets/adapters.

config RTL8169
	bool "Realtek 8169 series Ethernet controller driver"
	help
	  This driver supports Realtek 8169 series gigabit ethernet family of
	  PCI/PCIe chipsets/adapters.

config SMC911X
	bool "SMSC LAN911x and LAN921x controller driver"

if SMC911X

config SMC911X_BASE
	hex "SMC911X Base Address"
	help
	  Define this to hold the physical address
	  of the device (I/O space)

choice
	prompt "SMC911X bus width"
	default SMC911X_16_BIT

config SMC911X_32_BIT
	bool "Enable 32-bit interface"

config SMC911X_16_BIT
	bool "Enable 16-bit interface"
	help
	  Define this if data bus is 16 bits. If your processor
	  automatically converts one 32 bit word to two 16 bit
	  words you may also try CONFIG_SMC911X_32_BIT.

endchoice
endif #SMC911X

config SUN7I_GMAC
	bool "Enable Allwinner GMAC Ethernet support"
	help
	  Enable the support for Sun7i GMAC Ethernet controller

config SUN7I_GMAC_FORCE_TXERR
	bool "Force PA17 as gmac function"
	depends on SUN7I_GMAC
	help
	  Some ethernet phys needs TXERR control. Since the GMAC
	  doesn't have such signal, setting PA17 as GMAC function
	  makes the pin output low, which enables data transmission.

config SUN4I_EMAC
	bool "Allwinner Sun4i Ethernet MAC support"
	depends on DM_ETH
	select PHYLIB
	help
	  This driver supports the Allwinner based SUN4I Ethernet MAC.

config SUN8I_EMAC
        bool "Allwinner Sun8i Ethernet MAC support"
        depends on DM_ETH
        select PHYLIB
	select PHY_GIGE
        help
          This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
	  It can be found in H3/A64/A83T based SoCs and compatible with both
	  External and Internal PHYs.

config SH_ETHER
	bool "Renesas SH Ethernet MAC"
	select PHYLIB
	help
	  This driver supports the Ethernet for Renesas SH and ARM SoCs.

config XILINX_AXIEMAC
	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
	select PHYLIB
	select MII
	bool "Xilinx AXI Ethernet"
	help
	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.

config XILINX_EMACLITE
	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
	select PHYLIB
	select MII
	bool "Xilinx Ethernetlite"
	help
	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.

config ZYNQ_GEM
	depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
	select PHYLIB
	bool "Xilinx Ethernet GEM"
	help
	  This MAC is present in Xilinx Zynq and ZynqMP SoCs.

config PIC32_ETH
	bool "Microchip PIC32 Ethernet Support"
	depends on DM_ETH && MACH_PIC32
	select PHYLIB
	help
	  This driver implements 10/100 Mbps Ethernet and MAC layer for
	  Microchip PIC32 microcontrollers.

config GMAC_ROCKCHIP
	bool "Rockchip Synopsys Designware Ethernet MAC"
	depends on DM_ETH && ETH_DESIGNWARE
	help
	  This driver provides Rockchip SoCs network support based on the
	  Synopsys Designware driver.

config RENESAS_RAVB
	bool "Renesas Ethernet AVB MAC"
	depends on DM_ETH && RCAR_GEN3
	select PHYLIB
	help
	  This driver implements support for the Ethernet AVB block in
	  Renesas M3 and H3 SoCs.

config MPC8XX_FEC
	bool "Fast Ethernet Controller on MPC8XX"
	depends on 8xx
	select MII
	help
	  This driver implements support for the Fast Ethernet Controller
	  on MPC8XX

config ETHER_ON_FEC1
	bool "FEC1"
	depends on MPC8XX_FEC
	default y

config FEC1_PHY
	int "FEC1 PHY"
	depends on ETHER_ON_FEC1
	default -1
	help
	  Define to the hardcoded PHY address which corresponds
	  to the given FEC; i. e.
		#define CONFIG_FEC1_PHY 4
	  means that the PHY with address 4 is connected to FEC1

	  When set to -1, means to probe for first available.

config PHY_NORXERR
	bool "PHY_NORXERR"
	depends on ETHER_ON_FEC1
	default n
	help
	  The PHY does not have a RXERR line (RMII only).
	  (so program the FEC to ignore it).

config ETHER_ON_FEC2
	bool "FEC2"
	depends on MPC8XX_FEC && MPC885
	default y

config FEC2_PHY
	int "FEC2 PHY"
	depends on ETHER_ON_FEC2
	default -1
	help
	  Define to the hardcoded PHY address which corresponds
	  to the given FEC; i. e.
		#define CONFIG_FEC1_PHY 4
	  means that the PHY with address 4 is connected to FEC1

	  When set to -1, means to probe for first available.

config FEC2_PHY_NORXERR
	bool "PHY_NORXERR"
	depends on ETHER_ON_FEC2
	default n
	help
	  The PHY does not have a RXERR line (RMII only).
	  (so program the FEC to ignore it).

config SYS_DPAA_QBMAN
	bool "Device tree fixup for QBMan on freescale SOCs"
	depends on (ARM || PPC) && !SPL_BUILD
	default y if ARCH_B4860 || \
		     ARCH_B4420 || \
		     ARCH_P1023 || \
		     ARCH_P2041 || \
		     ARCH_T1023 || \
		     ARCH_T1024 || \
		     ARCH_T1040 || \
		     ARCH_T1042 || \
		     ARCH_T2080 || \
		     ARCH_T2081 || \
		     ARCH_T4240 || \
		     ARCH_T4160 || \
		     ARCH_P4080 || \
		     ARCH_P3041 || \
		     ARCH_P5040 || \
		     ARCH_P5020 || \
		     ARCH_LS1043A || \
		     ARCH_LS1046A
	help
	  QBman fixups to allow deep sleep in DPAA 1 SOCs

endif # NETDEVICES
Commit	Line	Data
af2cbfd6 A	1	source "drivers/net/phy/Kconfig"
af2cbfd6 A	2
05c3e68f JH	3	config DM_ETH
	4	bool "Enable Driver Model for Ethernet drivers"
	5	depends on DM
	6	help
	7	Enable driver model for Ethernet.
	8
	9	The eth_*() interface will be implemented by the UC_ETH class
	10	This is currently implemented in net/eth.c
	11	Look in include/net.h for details.
3ea143ab JH	12
	13	menuconfig NETDEVICES
	14	bool "Network device support"
	15	depends on NET
ef0f2f57	16	default y if DM_ETH
3ea143ab JH	17	help
	18	You must select Y to enable any network device support
	19	Generally if you have any networking support this is a given
	20
	21	If unsure, say Y
	22
	23	if NETDEVICES
	24
449ea2cd PT	25	config PHY_GIGE
	26	bool "Enable GbE PHY status parsing and configuration"
	27	help
	28	Enables support for parsing the status output and for
	29	configuring GbE PHYs (affects the inner workings of some
	30	commands and miiphyutil.c).
	31
e40095f6 MV	32	config AG7XXX
	33	bool "Atheros AG7xxx Ethernet MAC support"
	34	depends on DM_ETH && ARCH_ATH79
	35	select PHYLIB
	36	help
	37	This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
	38	present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
	39
	40
96fa1e43 TC	41	config ALTERA_TSE
	42	bool "Altera Triple-Speed Ethernet MAC support"
	43	depends on DM_ETH
	44	select PHYLIB
	45	help
	46	This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
	47	Please find details on the "Triple-Speed Ethernet MegaCore Function
	48	Resource Center" of Altera.
	49
c89782dc SV	50	config BCM_SF2_ETH
	51	bool "Broadcom SF2 (Starfighter2) Ethernet support"
	52	select PHYLIB
	53	help
	54	This is an abstract framework which provides a generic interface
	55	to MAC and DMA management for multiple Broadcom SoCs such as
	56	Cygnus, NSP and bcm28155_ap platforms.
	57
	58	config BCM_SF2_ETH_DEFAULT_PORT
	59	int "Broadcom SF2 (Starfighter2) Ethernet default port number"
	60	depends on BCM_SF2_ETH
	61	default 0
	62	help
	63	Default port number for the Starfighter2 ethernet driver.
	64
	65	config BCM_SF2_ETH_GMAC
	66	bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
	67	depends on BCM_SF2_ETH
	68	help
	69	This flag enables the ethernet support for Broadcom platforms with
	70	GMAC such as Cygnus. This driver is based on the framework provided
	71	by the BCM_SF2_ETH driver.
	72	Say Y to any bcmcygnus based platforms.
	73
ba4dfef1 SW	74	config DWC_ETH_QOS
	75	bool "Synopsys DWC Ethernet QOS device support"
	76	depends on DM_ETH
	77	select PHYLIB
	78	help
	79	This driver supports the Synopsys Designware Ethernet QOS (Quality
	80	Of Service) IP block. The IP supports many options for bus type,
	81	clocking/reset structure, and feature list. This driver currently
	82	supports the specific configuration used in NVIDIA's Tegra186 chip,
	83	but should be extensible to other combinations quite easily.
	84
c294ac5c SG	85	config E1000
	86	bool "Intel PRO/1000 Gigabit Ethernet support"
	87	help
	88	This driver supports Intel(R) PRO/1000 gigabit ethernet family of
	89	adapters. For more information on how to identify your adapter, go
	90	to the Adapter & Driver ID Guide at:
	91
	92	<http://support.intel.com/support/network/adapter/pro100/21397.htm>
	93
	94	config E1000_SPI_GENERIC
	95	bool "Allow access to the Intel 8257x SPI bus"
	96	depends on E1000
	97	help
	98	Allow generic access to the SPI bus on the Intel 8257x, for
	99	example with the "sspi" command.
	100
	101	config E1000_SPI
	102	bool "Enable SPI bus utility code"
	103	depends on E1000
	104	help
	105	Utility code for direct access to the SPI bus on Intel 8257x.
	106	This does not do anything useful unless you set at least one
	107	of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
	108
	109	config CMD_E1000
	110	bool "Enable the e1000 command"
	111	depends on E1000
	112	help
	113	This enables the 'e1000' management command for E1000 devices. When
	114	used on devices with SPI support you can reprogram the EEPROM from
	115	U-Boot.
	116
3ea143ab JH	117	config ETH_SANDBOX
	118	depends on DM_ETH && SANDBOX
	119	default y
	120	bool "Sandbox: Mocked Ethernet driver"
	121	help
	122	This driver simply responds with fake ARP replies and ping
	123	replies that are used to verify network stack functionality
	124
	125	This driver is particularly useful in the test/dm/eth.c tests
	126
a346ca79 JH	127	config ETH_SANDBOX_RAW
	128	depends on DM_ETH && SANDBOX
	129	default y
	130	bool "Sandbox: Bridge to Linux Raw Sockets"
	131	help
	132	This driver is a bridge from the bottom of the network stack
	133	in U-Boot to the RAW AF_PACKET API in Linux. This allows real
	134	network traffic to be tested from within sandbox. See
	135	board/sandbox/README.sandbox for more details.
	136
ef48f6dd SG	137	config ETH_DESIGNWARE
ef48f6dd SG	138	bool "Synopsys Designware Ethernet MAC"
25af71c4	139	select PHYLIB
ef48f6dd SG	140	help
	141	This MAC is present in SoCs from various vendors. It supports
	142	100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
	143	provide the PHY (physical media interface).
	144
f0727120 MF	145	config ETHOC
	146	bool "OpenCores 10/100 Mbps Ethernet MAC"
	147	help
	148	This MAC is present in OpenRISC and Xtensa XTFPGA boards.
	149
97d29ca3 JT	150	config FEC_MXC
97d29ca3 JT	151	bool "FEC Ethernet controller"
98d62e61	152	depends on MX5 \|\| MX6
97d29ca3 JT	153	help
	154	This driver supports the 10/100 Fast Ethernet controller for
	155	NXP i.MX processors.
	156
8dc1b17f TR	157	config FTMAC100
	158	bool "Ftmac100 Ethernet Support"
	159	help
	160	This MAC is present in Andestech SoCs.
	161
7654f62f	162	config MVNETA
e7ab2ccd MR	163	bool "Marvell Armada XP/385/3700 network interface support"
e7ab2ccd MR	164	depends on ARMADA_XP \|\| ARMADA_38X \|\| ARMADA_3700
7654f62f CP	165	select PHYLIB
	166	help
	167	This driver supports the network interface units in the
e7ab2ccd	168	Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
7654f62f	169
99d4c6d3	170	config MVPP2
e7935c47 SR	171	bool "Marvell Armada 375/7K/8K network interface support"
e7935c47 SR	172	depends on ARMADA_375 \|\| ARMADA_8K
99d4c6d3 SR	173	select PHYLIB
	174	help
	175	This driver supports the network interface units in the
e7935c47	176	Marvell ARMADA 375, 7K and 8K SoCs.
99d4c6d3	177
ebcb40a5 WY	178	config MACB
	179	bool "Cadence MACB/GEM Ethernet Interface"
	180	depends on DM_ETH
	181	select PHYLIB
	182	help
	183	The Cadence MACB ethernet interface is found on many Atmel
	184	AT91 and SAMA5 parts. This driver also supports the Cadence
	185	GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
	186	Say Y to include support for the MACB/GEM chip.
	187
4bf56913 WL	188	config MACB_ZYNQ
	189	bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
	190	depends on MACB
	191	help
	192	The Cadence MACB ethernet interface was used on Zynq platform.
	193	Say Y to enable support for the MACB/GEM in Zynq chip.
	194
b68fe152 BM	195	config PCH_GBE
	196	bool "Intel Platform Controller Hub EG20T GMAC driver"
	197	depends on DM_ETH && DM_PCI
	198	select PHYLIB
	199	help
	200	This MAC is present in Intel Platform Controller Hub EG20T. It
	201	supports 10/100/1000 Mbps operation.
	202
751b0be0 MJ	203	config RGMII
	204	bool "Enable RGMII"
	205	help
	206	Enable the support of the Reduced Gigabit Media-Independent
	207	Interface (RGMII).
	208
86e9dc86 BM	209	config RTL8139
	210	bool "Realtek 8139 series Ethernet controller driver"
	211	help
	212	This driver supports Realtek 8139 series fast ethernet family of
	213	PCI chipsets/adapters.
	214
0764f24a BM	215	config RTL8169
	216	bool "Realtek 8169 series Ethernet controller driver"
	217	help
	218	This driver supports Realtek 8169 series gigabit ethernet family of
	219	PCI/PCIe chipsets/adapters.
	220
8daec2d9 AF	221	config SMC911X
	222	bool "SMSC LAN911x and LAN921x controller driver"
	223
	224	if SMC911X
	225
	226	config SMC911X_BASE
	227	hex "SMC911X Base Address"
	228	help
	229	Define this to hold the physical address
	230	of the device (I/O space)
	231
	232	choice
	233	prompt "SMC911X bus width"
	234	default SMC911X_16_BIT
	235
	236	config SMC911X_32_BIT
	237	bool "Enable 32-bit interface"
	238
	239	config SMC911X_16_BIT
	240	bool "Enable 16-bit interface"
	241	help
	242	Define this if data bus is 16 bits. If your processor
	243	automatically converts one 32 bit word to two 16 bit
	244	words you may also try CONFIG_SMC911X_32_BIT.
	245
	246	endchoice
	247	endif #SMC911X
	248
4d43d065 MJ	249	config SUN7I_GMAC
	250	bool "Enable Allwinner GMAC Ethernet support"
	251	help
	252	Enable the support for Sun7i GMAC Ethernet controller
	253
aba39249 SM	254	config SUN7I_GMAC_FORCE_TXERR
	255	bool "Force PA17 as gmac function"
	256	depends on SUN7I_GMAC
	257	help
	258	Some ethernet phys needs TXERR control. Since the GMAC
	259	doesn't have such signal, setting PA17 as GMAC function
	260	makes the pin output low, which enables data transmission.
	261
abc3e4df MJ	262	config SUN4I_EMAC
	263	bool "Allwinner Sun4i Ethernet MAC support"
	264	depends on DM_ETH
6270a3f0	265	select PHYLIB
abc3e4df MJ	266	help
	267	This driver supports the Allwinner based SUN4I Ethernet MAC.
	268
a29710c5 AST	269	config SUN8I_EMAC
	270	bool "Allwinner Sun8i Ethernet MAC support"
	271	depends on DM_ETH
	272	select PHYLIB
449ea2cd	273	select PHY_GIGE
a29710c5 AST	274	help
	275	This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
	276	It can be found in H3/A64/A83T based SoCs and compatible with both
7131d2d0	277	External and Internal PHYs.
a29710c5	278
dcd18eaf NI	279	config SH_ETHER
	280	bool "Renesas SH Ethernet MAC"
	281	select PHYLIB
	282	help
	283	This driver supports the Ethernet for Renesas SH and ARM SoCs.
	284
338a5f2b MS	285	config XILINX_AXIEMAC
	286	depends on DM_ETH && (MICROBLAZE \|\| ARCH_ZYNQ \|\| ARCH_ZYNQMP)
	287	select PHYLIB
	288	select MII
	289	bool "Xilinx AXI Ethernet"
	290	help
	291	This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
	292
3229c869	293	config XILINX_EMACLITE
2f1f05f4	294	depends on DM_ETH && (MICROBLAZE \|\| ARCH_ZYNQ \|\| ARCH_ZYNQMP \|\| MIPS)
3229c869 MS	295	select PHYLIB
	296	select MII
	297	bool "Xilinx Ethernetlite"
	298	help
	299	This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
	300
596e5782 MS	301	config ZYNQ_GEM
596e5782 MS	302	depends on DM_ETH && (ARCH_ZYNQ \|\| ARCH_ZYNQMP)
7bccc75a	303	select PHYLIB
596e5782 MS	304	bool "Xilinx Ethernet GEM"
596e5782 MS	305	help
c9428107	306	This MAC is present in Xilinx Zynq and ZynqMP SoCs.
596e5782	307
23e7578c PCM	308	config PIC32_ETH
	309	bool "Microchip PIC32 Ethernet Support"
	310	depends on DM_ETH && MACH_PIC32
	311	select PHYLIB
	312	help
	313	This driver implements 10/100 Mbps Ethernet and MAC layer for
	314	Microchip PIC32 microcontrollers.
	315
0125bcf0 SS	316	config GMAC_ROCKCHIP
	317	bool "Rockchip Synopsys Designware Ethernet MAC"
	318	depends on DM_ETH && ETH_DESIGNWARE
	319	help
	320	This driver provides Rockchip SoCs network support based on the
	321	Synopsys Designware driver.
	322
8ae51b6f MV	323	config RENESAS_RAVB
	324	bool "Renesas Ethernet AVB MAC"
	325	depends on DM_ETH && RCAR_GEN3
	326	select PHYLIB
	327	help
	328	This driver implements support for the Ethernet AVB block in
	329	Renesas M3 and H3 SoCs.
	330
fad51ac3 CL	331	config MPC8XX_FEC
	332	bool "Fast Ethernet Controller on MPC8XX"
	333	depends on 8xx
	334	select MII
	335	help
	336	This driver implements support for the Fast Ethernet Controller
	337	on MPC8XX
	338
	339	config ETHER_ON_FEC1
	340	bool "FEC1"
	341	depends on MPC8XX_FEC
	342	default y
	343
	344	config FEC1_PHY
	345	int "FEC1 PHY"
	346	depends on ETHER_ON_FEC1
	347	default -1
	348	help
	349	Define to the hardcoded PHY address which corresponds
	350	to the given FEC; i. e.
	351	#define CONFIG_FEC1_PHY 4
	352	means that the PHY with address 4 is connected to FEC1
	353
	354	When set to -1, means to probe for first available.
	355
	356	config PHY_NORXERR
	357	bool "PHY_NORXERR"
	358	depends on ETHER_ON_FEC1
	359	default n
	360	help
	361	The PHY does not have a RXERR line (RMII only).
	362	(so program the FEC to ignore it).
	363
	364	config ETHER_ON_FEC2
	365	bool "FEC2"
	366	depends on MPC8XX_FEC && MPC885
	367	default y
	368
	369	config FEC2_PHY
	370	int "FEC2 PHY"
	371	depends on ETHER_ON_FEC2
	372	default -1
	373	help
	374	Define to the hardcoded PHY address which corresponds
	375	to the given FEC; i. e.
	376	#define CONFIG_FEC1_PHY 4
	377	means that the PHY with address 4 is connected to FEC1
	378
	379	When set to -1, means to probe for first available.
	380
	381	config FEC2_PHY_NORXERR
	382	bool "PHY_NORXERR"
	383	depends on ETHER_ON_FEC2
	384	default n
	385	help
	386	The PHY does not have a RXERR line (RMII only).
	387	(so program the FEC to ignore it).
	388
541d5766 AM	389	config SYS_DPAA_QBMAN
	390	bool "Device tree fixup for QBMan on freescale SOCs"
	391	depends on (ARM \|\| PPC) && !SPL_BUILD
	392	default y if ARCH_B4860 \|\| \
	393	ARCH_B4420 \|\| \
	394	ARCH_P1023 \|\| \
	395	ARCH_P2041 \|\| \
	396	ARCH_T1023 \|\| \
	397	ARCH_T1024 \|\| \
	398	ARCH_T1040 \|\| \
	399	ARCH_T1042 \|\| \
	400	ARCH_T2080 \|\| \
	401	ARCH_T2081 \|\| \
	402	ARCH_T4240 \|\| \
	403	ARCH_T4160 \|\| \
	404	ARCH_P4080 \|\| \
	405	ARCH_P3041 \|\| \
	406	ARCH_P5040 \|\| \
	407	ARCH_P5020 \|\| \
	408	ARCH_LS1043A \|\| \
	409	ARCH_LS1046A
	410	help
	411	QBman fixups to allow deep sleep in DPAA 1 SOCs
	412
3ea143ab	413	endif # NETDEVICES