[thirdparty/linux.git] / drivers / net / phy / vitesse.c

/*
 * Driver for Vitesse PHYs
 *
 * Author: Kriston Carson
 *
 * Copyright (c) 2005 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>

/* Vitesse Extended Control Register 1 */
#define MII_VSC8244_EXT_CON1           0x17
#define MII_VSC8244_EXTCON1_INIT       0x0000
#define MII_VSC8244_EXTCON1_TX_SKEW_MASK	0x0c00
#define MII_VSC8244_EXTCON1_RX_SKEW_MASK	0x0300
#define MII_VSC8244_EXTCON1_TX_SKEW	0x0800
#define MII_VSC8244_EXTCON1_RX_SKEW	0x0200

/* Vitesse Interrupt Mask Register */
#define MII_VSC8244_IMASK		0x19
#define MII_VSC8244_IMASK_IEN		0x8000
#define MII_VSC8244_IMASK_SPEED		0x4000
#define MII_VSC8244_IMASK_LINK		0x2000
#define MII_VSC8244_IMASK_DUPLEX	0x1000
#define MII_VSC8244_IMASK_MASK		0xf000

#define MII_VSC8221_IMASK_MASK		0xa000

/* Vitesse Interrupt Status Register */
#define MII_VSC8244_ISTAT		0x1a
#define MII_VSC8244_ISTAT_STATUS	0x8000
#define MII_VSC8244_ISTAT_SPEED		0x4000
#define MII_VSC8244_ISTAT_LINK		0x2000
#define MII_VSC8244_ISTAT_DUPLEX	0x1000

/* Vitesse Auxiliary Control/Status Register */
#define MII_VSC8244_AUX_CONSTAT        	0x1c
#define MII_VSC8244_AUXCONSTAT_INIT    	0x0000
#define MII_VSC8244_AUXCONSTAT_DUPLEX  	0x0020
#define MII_VSC8244_AUXCONSTAT_SPEED   	0x0018
#define MII_VSC8244_AUXCONSTAT_GBIT    	0x0010
#define MII_VSC8244_AUXCONSTAT_100     	0x0008

#define MII_VSC8221_AUXCONSTAT_INIT	0x0004 /* need to set this bit? */
#define MII_VSC8221_AUXCONSTAT_RESERVED	0x0004

#define PHY_ID_VSC8244			0x000fc6c0
#define PHY_ID_VSC8221			0x000fc550

MODULE_DESCRIPTION("Vitesse PHY driver");
MODULE_AUTHOR("Kriston Carson");
MODULE_LICENSE("GPL");

static int vsc824x_config_init(struct phy_device *phydev)
{
	int extcon;
	int err;

	err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
			MII_VSC8244_AUXCONSTAT_INIT);
	if (err < 0)
		return err;

	extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);

	if (extcon < 0)
		return err;

	extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
			MII_VSC8244_EXTCON1_RX_SKEW_MASK);

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
		extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
				MII_VSC8244_EXTCON1_RX_SKEW);

	err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);

	return err;
}

static int vsc824x_ack_interrupt(struct phy_device *phydev)
{
	int err = 0;
	
	/*
	 * Don't bother to ACK the interrupts if interrupts
	 * are disabled.  The 824x cannot clear the interrupts
	 * if they are disabled.
	 */
	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
		err = phy_read(phydev, MII_VSC8244_ISTAT);

	return (err < 0) ? err : 0;
}

static int vsc82xx_config_intr(struct phy_device *phydev)
{
	int err;

	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
		err = phy_write(phydev, MII_VSC8244_IMASK,
			phydev->drv->phy_id == PHY_ID_VSC8244 ?
				MII_VSC8244_IMASK_MASK :
				MII_VSC8221_IMASK_MASK);
	else {
		/*
		 * The Vitesse PHY cannot clear the interrupt
		 * once it has disabled them, so we clear them first
		 */
		err = phy_read(phydev, MII_VSC8244_ISTAT);

		if (err < 0)
			return err;

		err = phy_write(phydev, MII_VSC8244_IMASK, 0);
	}

	return err;
}

/* Vitesse 824x */
static struct phy_driver vsc8244_driver = {
	.phy_id		= PHY_ID_VSC8244,
	.name		= "Vitesse VSC8244",
	.phy_id_mask	= 0x000fffc0,
	.features	= PHY_GBIT_FEATURES,
	.flags		= PHY_HAS_INTERRUPT,
	.config_init	= &vsc824x_config_init,
	.config_aneg	= &genphy_config_aneg,
	.read_status	= &genphy_read_status,
	.ack_interrupt	= &vsc824x_ack_interrupt,
	.config_intr	= &vsc82xx_config_intr,
	.driver 	= { .owner = THIS_MODULE,},
};

static int vsc8221_config_init(struct phy_device *phydev)
{
	int err;

	err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
			MII_VSC8221_AUXCONSTAT_INIT);
	return err;

	/* Perhaps we should set EXT_CON1 based on the interface?
	   Options are 802.3Z SerDes or SGMII */
}

/* Vitesse 8221 */
static struct phy_driver vsc8221_driver = {
	.phy_id		= PHY_ID_VSC8221,
	.phy_id_mask	= 0x000ffff0,
	.name		= "Vitesse VSC8221",
	.features	= PHY_GBIT_FEATURES,
	.flags		= PHY_HAS_INTERRUPT,
	.config_init	= &vsc8221_config_init,
	.config_aneg	= &genphy_config_aneg,
	.read_status	= &genphy_read_status,
	.ack_interrupt	= &vsc824x_ack_interrupt,
	.config_intr	= &vsc82xx_config_intr,
	.driver 	= { .owner = THIS_MODULE,},
};

static int __init vsc82xx_init(void)
{
	int err;

	err = phy_driver_register(&vsc8244_driver);
	if (err < 0)
		return err;
	err = phy_driver_register(&vsc8221_driver);
	if (err < 0)
		phy_driver_unregister(&vsc8244_driver);
	return err;
}

static void __exit vsc82xx_exit(void)
{
	phy_driver_unregister(&vsc8244_driver);
	phy_driver_unregister(&vsc8221_driver);
}

module_init(vsc82xx_init);
module_exit(vsc82xx_exit);
Commit	Line	Data
ef82a306 JL	1	/*
	2	* Driver for Vitesse PHYs
	3	*
	4	* Author: Kriston Carson
	5	*
	6	* Copyright (c) 2005 Freescale Semiconductor, Inc.
	7	*
	8	* This program is free software; you can redistribute it and/or modify it
	9	* under the terms of the GNU General Public License as published by the
	10	* Free Software Foundation; either version 2 of the License, or (at your
	11	* option) any later version.
	12	*
	13	*/
	14
ef82a306 JL	15	#include <linux/kernel.h>
	16	#include <linux/module.h>
	17	#include <linux/mii.h>
	18	#include <linux/ethtool.h>
	19	#include <linux/phy.h>
	20
	21	/* Vitesse Extended Control Register 1 */
	22	#define MII_VSC8244_EXT_CON1 0x17
	23	#define MII_VSC8244_EXTCON1_INIT 0x0000
af2d940d AF	24	#define MII_VSC8244_EXTCON1_TX_SKEW_MASK 0x0c00
	25	#define MII_VSC8244_EXTCON1_RX_SKEW_MASK 0x0300
	26	#define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
	27	#define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
ef82a306 JL	28
	29	/* Vitesse Interrupt Mask Register */
	30	#define MII_VSC8244_IMASK 0x19
	31	#define MII_VSC8244_IMASK_IEN 0x8000
	32	#define MII_VSC8244_IMASK_SPEED 0x4000
	33	#define MII_VSC8244_IMASK_LINK 0x2000
	34	#define MII_VSC8244_IMASK_DUPLEX 0x1000
	35	#define MII_VSC8244_IMASK_MASK 0xf000
	36
11c6dd2c TP	37	#define MII_VSC8221_IMASK_MASK 0xa000
11c6dd2c TP	38
ef82a306 JL	39	/* Vitesse Interrupt Status Register */
	40	#define MII_VSC8244_ISTAT 0x1a
	41	#define MII_VSC8244_ISTAT_STATUS 0x8000
	42	#define MII_VSC8244_ISTAT_SPEED 0x4000
	43	#define MII_VSC8244_ISTAT_LINK 0x2000
	44	#define MII_VSC8244_ISTAT_DUPLEX 0x1000
	45
	46	/* Vitesse Auxiliary Control/Status Register */
	47	#define MII_VSC8244_AUX_CONSTAT 0x1c
af2d940d	48	#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
ef82a306 JL	49	#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
	50	#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
	51	#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
	52	#define MII_VSC8244_AUXCONSTAT_100 0x0008
	53
11c6dd2c TP	54	#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */
	55	#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
	56
	57	#define PHY_ID_VSC8244 0x000fc6c0
	58	#define PHY_ID_VSC8221 0x000fc550
	59
ef82a306 JL	60	MODULE_DESCRIPTION("Vitesse PHY driver");
	61	MODULE_AUTHOR("Kriston Carson");
	62	MODULE_LICENSE("GPL");
	63
	64	static int vsc824x_config_init(struct phy_device *phydev)
	65	{
af2d940d	66	int extcon;
ef82a306 JL	67	int err;
	68
	69	err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
	70	MII_VSC8244_AUXCONSTAT_INIT);
	71	if (err < 0)
	72	return err;
	73
af2d940d AF	74	extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
	75
	76	if (extcon < 0)
	77	return err;
	78
	79	extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK \|
	80	MII_VSC8244_EXTCON1_RX_SKEW_MASK);
	81
	82	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
	83	extcon \|= (MII_VSC8244_EXTCON1_TX_SKEW \|
	84	MII_VSC8244_EXTCON1_RX_SKEW);
	85
	86	err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
	87
ef82a306 JL	88	return err;
	89	}
	90
	91	static int vsc824x_ack_interrupt(struct phy_device *phydev)
	92	{
1d5e83aa AF	93	int err = 0;
	94
	95	/*
	96	* Don't bother to ACK the interrupts if interrupts
	97	* are disabled. The 824x cannot clear the interrupts
	98	* if they are disabled.
	99	*/
	100	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
	101	err = phy_read(phydev, MII_VSC8244_ISTAT);
ef82a306 JL	102
	103	return (err < 0) ? err : 0;
	104	}
	105
11c6dd2c	106	static int vsc82xx_config_intr(struct phy_device *phydev)
ef82a306 JL	107	{
	108	int err;
	109
	110	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
	111	err = phy_write(phydev, MII_VSC8244_IMASK,
11c6dd2c TP	112	phydev->drv->phy_id == PHY_ID_VSC8244 ?
	113	MII_VSC8244_IMASK_MASK :
	114	MII_VSC8221_IMASK_MASK);
1d5e83aa AF	115	else {
	116	/*
	117	* The Vitesse PHY cannot clear the interrupt
	118	* once it has disabled them, so we clear them first
	119	*/
	120	err = phy_read(phydev, MII_VSC8244_ISTAT);
	121
52cb1c2b	122	if (err < 0)
1d5e83aa AF	123	return err;
1d5e83aa AF	124
ef82a306	125	err = phy_write(phydev, MII_VSC8244_IMASK, 0);
1d5e83aa AF	126	}
1d5e83aa AF	127
ef82a306 JL	128	return err;
	129	}
	130
	131	/* Vitesse 824x */
	132	static struct phy_driver vsc8244_driver = {
11c6dd2c	133	.phy_id = PHY_ID_VSC8244,
ef82a306 JL	134	.name = "Vitesse VSC8244",
	135	.phy_id_mask = 0x000fffc0,
	136	.features = PHY_GBIT_FEATURES,
	137	.flags = PHY_HAS_INTERRUPT,
	138	.config_init = &vsc824x_config_init,
	139	.config_aneg = &genphy_config_aneg,
	140	.read_status = &genphy_read_status,
	141	.ack_interrupt = &vsc824x_ack_interrupt,
11c6dd2c	142	.config_intr = &vsc82xx_config_intr,
ef82a306 JL	143	.driver = { .owner = THIS_MODULE,},
	144	};
	145
11c6dd2c	146	static int vsc8221_config_init(struct phy_device *phydev)
ef82a306	147	{
11c6dd2c TP	148	int err;
	149
	150	err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
	151	MII_VSC8221_AUXCONSTAT_INIT);
	152	return err;
	153
	154	/* Perhaps we should set EXT_CON1 based on the interface?
	155	Options are 802.3Z SerDes or SGMII */
	156	}
	157
	158	/* Vitesse 8221 */
	159	static struct phy_driver vsc8221_driver = {
	160	.phy_id = PHY_ID_VSC8221,
	161	.phy_id_mask = 0x000ffff0,
	162	.name = "Vitesse VSC8221",
	163	.features = PHY_GBIT_FEATURES,
	164	.flags = PHY_HAS_INTERRUPT,
	165	.config_init = &vsc8221_config_init,
	166	.config_aneg = &genphy_config_aneg,
	167	.read_status = &genphy_read_status,
	168	.ack_interrupt = &vsc824x_ack_interrupt,
	169	.config_intr = &vsc82xx_config_intr,
	170	.driver = { .owner = THIS_MODULE,},
	171	};
	172
	173	static int __init vsc82xx_init(void)
	174	{
	175	int err;
	176
	177	err = phy_driver_register(&vsc8244_driver);
	178	if (err < 0)
	179	return err;
	180	err = phy_driver_register(&vsc8221_driver);
	181	if (err < 0)
	182	phy_driver_unregister(&vsc8244_driver);
	183	return err;
ef82a306 JL	184	}
ef82a306 JL	185
11c6dd2c	186	static void __exit vsc82xx_exit(void)
ef82a306 JL	187	{
ef82a306 JL	188	phy_driver_unregister(&vsc8244_driver);
11c6dd2c	189	phy_driver_unregister(&vsc8221_driver);
ef82a306 JL	190	}
ef82a306 JL	191
11c6dd2c TP	192	module_init(vsc82xx_init);
11c6dd2c TP	193	module_exit(vsc82xx_exit);