[thirdparty/kernel/stable.git] / drivers / parisc / wax.c

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 *	WAX Device Driver
 *
 *	(c) Copyright 2000 The Puffin Group Inc.
 *
 *	by Helge Deller <deller@gmx.de>
 */

#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/types.h>

#include <asm/io.h>
#include <asm/hardware.h>

#include "gsc.h"

#define WAX_GSC_IRQ	7	/* Hardcoded Interrupt for GSC */

static void wax_choose_irq(struct parisc_device *dev, void *ctrl)
{
	int irq;

	switch (dev->id.sversion) {
		case 0x73:	irq =  1; break; /* i8042 General */
		case 0x8c:	irq =  6; break; /* Serial */
		case 0x90:	irq = 10; break; /* EISA */
		default:	return;		 /* Unknown */
	}

	gsc_asic_assign_irq(ctrl, irq, &dev->irq);

	switch (dev->id.sversion) {
		case 0x73:	irq =  2; break; /* i8042 High-priority */
		case 0x90:	irq =  0; break; /* EISA NMI */
		default:	return;		 /* No secondary IRQ */
	}

	gsc_asic_assign_irq(ctrl, irq, &dev->aux_irq);
}

static void __init
wax_init_irq(struct gsc_asic *wax)
{
	unsigned long base = wax->hpa;

	/* Wax-off */
	gsc_writel(0x00000000, base+OFFSET_IMR);

	/* clear pending interrupts */
	gsc_readl(base+OFFSET_IRR);

	/* We're not really convinced we want to reset the onboard
         * devices. Firmware does it for us...
	 */

	/* Resets */
//	gsc_writel(0xFFFFFFFF, base+0x1000); /* HIL */
//	gsc_writel(0xFFFFFFFF, base+0x2000); /* RS232-B on Wax */
}

static int __init wax_init_chip(struct parisc_device *dev)
{
	struct gsc_asic *wax;
	struct parisc_device *parent;
	struct gsc_irq gsc_irq;
	int ret;

	wax = kzalloc(sizeof(*wax), GFP_KERNEL);
	if (!wax)
		return -ENOMEM;

	wax->name = "wax";
	wax->hpa = dev->hpa.start;

	wax->version = 0;   /* gsc_readb(wax->hpa+WAX_VER); */
	printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa);

	/* Stop wax hissing for a bit */
	wax_init_irq(wax);

	/* the IRQ wax should use */
	dev->irq = gsc_claim_irq(&gsc_irq, WAX_GSC_IRQ);
	if (dev->irq < 0) {
		printk(KERN_ERR "%s(): cannot get GSC irq\n",
				__func__);
		kfree(wax);
		return -EBUSY;
	}

	wax->eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data;

	ret = request_irq(gsc_irq.irq, gsc_asic_intr, 0, "wax", wax);
	if (ret < 0) {
		kfree(wax);
		return ret;
	}

	/* enable IRQ's for devices below WAX */
	gsc_writel(wax->eim, wax->hpa + OFFSET_IAR);

	/* Done init'ing, register this driver */
	ret = gsc_common_setup(dev, wax);
	if (ret) {
		kfree(wax);
		return ret;
	}

	gsc_fixup_irqs(dev, wax, wax_choose_irq);
	/* On 715-class machines, Wax EISA is a sibling of Wax, not a child. */
	parent = parisc_parent(dev);
	if (parent->id.hw_type != HPHW_IOA) {
		gsc_fixup_irqs(parent, wax, wax_choose_irq);
	}

	return ret;
}

static const struct parisc_device_id wax_tbl[] __initconst = {
  	{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008e },
	{ 0, }
};

MODULE_DEVICE_TABLE(parisc, wax_tbl);

struct parisc_driver wax_driver __refdata = {
	.name =		"wax",
	.id_table =	wax_tbl,
	.probe =	wax_init_chip,
};
Commit	Line	Data
2874c5fd	1	// SPDX-License-Identifier: GPL-2.0-or-later
1da177e4 LT	2	/*
	3	* WAX Device Driver
	4	*
	5	* (c) Copyright 2000 The Puffin Group Inc.
	6	*
1da177e4 LT	7	* by Helge Deller <deller@gmx.de>
	8	*/
	9
	10	#include <linux/errno.h>
	11	#include <linux/init.h>
	12	#include <linux/interrupt.h>
	13	#include <linux/ioport.h>
	14	#include <linux/slab.h>
	15	#include <linux/module.h>
	16	#include <linux/types.h>
	17
	18	#include <asm/io.h>
	19	#include <asm/hardware.h>
	20
	21	#include "gsc.h"
	22
	23	#define WAX_GSC_IRQ 7 /* Hardcoded Interrupt for GSC */
	24
	25	static void wax_choose_irq(struct parisc_device dev, void ctrl)
	26	{
	27	int irq;
	28
	29	switch (dev->id.sversion) {
	30	case 0x73: irq = 1; break; /* i8042 General */
	31	case 0x8c: irq = 6; break; /* Serial */
	32	case 0x90: irq = 10; break; /* EISA */
	33	default: return; /* Unknown */
	34	}
	35
	36	gsc_asic_assign_irq(ctrl, irq, &dev->irq);
	37
	38	switch (dev->id.sversion) {
	39	case 0x73: irq = 2; break; /* i8042 High-priority */
	40	case 0x90: irq = 0; break; /* EISA NMI */
	41	default: return; /* No secondary IRQ */
	42	}
	43
	44	gsc_asic_assign_irq(ctrl, irq, &dev->aux_irq);
	45	}
	46
	47	static void __init
	48	wax_init_irq(struct gsc_asic *wax)
	49	{
	50	unsigned long base = wax->hpa;
	51
	52	/* Wax-off */
	53	gsc_writel(0x00000000, base+OFFSET_IMR);
	54
	55	/* clear pending interrupts */
	56	gsc_readl(base+OFFSET_IRR);
	57
	58	/* We're not really convinced we want to reset the onboard
	59	* devices. Firmware does it for us...
	60	*/
	61
	62	/* Resets */
	63	// gsc_writel(0xFFFFFFFF, base+0x1000); /* HIL */
	64	// gsc_writel(0xFFFFFFFF, base+0x2000); /* RS232-B on Wax */
	65	}
	66
df8e5bc6	67	static int __init wax_init_chip(struct parisc_device *dev)
1da177e4 LT	68	{
	69	struct gsc_asic *wax;
	70	struct parisc_device *parent;
	71	struct gsc_irq gsc_irq;
	72	int ret;
	73
cb6fc18e	74	wax = kzalloc(sizeof(*wax), GFP_KERNEL);
1da177e4 LT	75	if (!wax)
	76	return -ENOMEM;
	77
	78	wax->name = "wax";
53f01bba	79	wax->hpa = dev->hpa.start;
1da177e4 LT	80
	81	wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */
	82	printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa);
	83
	84	/* Stop wax hissing for a bit */
	85	wax_init_irq(wax);
	86
	87	/* the IRQ wax should use */
	88	dev->irq = gsc_claim_irq(&gsc_irq, WAX_GSC_IRQ);
	89	if (dev->irq < 0) {
	90	printk(KERN_ERR "%s(): cannot get GSC irq\n",
a8043ecb	91	__func__);
1da177e4 LT	92	kfree(wax);
	93	return -EBUSY;
	94	}
	95
	96	wax->eim = ((u32) gsc_irq.txn_addr) \| gsc_irq.txn_data;
	97
	98	ret = request_irq(gsc_irq.irq, gsc_asic_intr, 0, "wax", wax);
	99	if (ret < 0) {
	100	kfree(wax);
	101	return ret;
	102	}
	103
	104	/* enable IRQ's for devices below WAX */
	105	gsc_writel(wax->eim, wax->hpa + OFFSET_IAR);
	106
	107	/* Done init'ing, register this driver */
	108	ret = gsc_common_setup(dev, wax);
	109	if (ret) {
	110	kfree(wax);
	111	return ret;
	112	}
	113
	114	gsc_fixup_irqs(dev, wax, wax_choose_irq);
	115	/* On 715-class machines, Wax EISA is a sibling of Wax, not a child. */
	116	parent = parisc_parent(dev);
	117	if (parent->id.hw_type != HPHW_IOA) {
	118	gsc_fixup_irqs(parent, wax, wax_choose_irq);
	119	}
	120
	121	return ret;
	122	}
	123
cfe4fbfb	124	static const struct parisc_device_id wax_tbl[] __initconst = {
1da177e4 LT	125	{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008e },
	126	{ 0, }
	127	};
	128
	129	MODULE_DEVICE_TABLE(parisc, wax_tbl);
	130
cfe4fbfb	131	struct parisc_driver wax_driver __refdata = {
1da177e4 LT	132	.name = "wax",
	133	.id_table = wax_tbl,
	134	.probe = wax_init_chip,
	135	};