[people/ms/u-boot.git] / drivers / pci / pcie_dw_mvebu.c

/*
 * Copyright (C) 2015 Marvell International Ltd.
 *
 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
 *
 * Based on:
 *   - drivers/pci/pcie_imx.c
 *   - drivers/pci/pci_mvebu.c
 *   - drivers/pci/pcie_xilinx.c
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <dm.h>
#include <pci.h>
#include <asm/io.h>
#include <asm-generic/gpio.h>

DECLARE_GLOBAL_DATA_PTR;

/* PCI Config space registers */
#define PCIE_CONFIG_BAR0		0x10
#define PCIE_LINK_STATUS_REG		0x80
#define PCIE_LINK_STATUS_SPEED_OFF	16
#define PCIE_LINK_STATUS_SPEED_MASK	(0xf << PCIE_LINK_STATUS_SPEED_OFF)
#define PCIE_LINK_STATUS_WIDTH_OFF	20
#define PCIE_LINK_STATUS_WIDTH_MASK	(0xf << PCIE_LINK_STATUS_WIDTH_OFF)

/* Resizable bar capability registers */
#define RESIZABLE_BAR_CAP		0x250
#define RESIZABLE_BAR_CTL0		0x254
#define RESIZABLE_BAR_CTL1		0x258

/* iATU registers */
#define PCIE_ATU_VIEWPORT		0x900
#define PCIE_ATU_REGION_INBOUND		(0x1 << 31)
#define PCIE_ATU_REGION_OUTBOUND	(0x0 << 31)
#define PCIE_ATU_REGION_INDEX1		(0x1 << 0)
#define PCIE_ATU_REGION_INDEX0		(0x0 << 0)
#define PCIE_ATU_CR1			0x904
#define PCIE_ATU_TYPE_MEM		(0x0 << 0)
#define PCIE_ATU_TYPE_IO		(0x2 << 0)
#define PCIE_ATU_TYPE_CFG0		(0x4 << 0)
#define PCIE_ATU_TYPE_CFG1		(0x5 << 0)
#define PCIE_ATU_CR2			0x908
#define PCIE_ATU_ENABLE			(0x1 << 31)
#define PCIE_ATU_BAR_MODE_ENABLE	(0x1 << 30)
#define PCIE_ATU_LOWER_BASE		0x90C
#define PCIE_ATU_UPPER_BASE		0x910
#define PCIE_ATU_LIMIT			0x914
#define PCIE_ATU_LOWER_TARGET		0x918
#define PCIE_ATU_BUS(x)			(((x) & 0xff) << 24)
#define PCIE_ATU_DEV(x)			(((x) & 0x1f) << 19)
#define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
#define PCIE_ATU_UPPER_TARGET		0x91C

#define PCIE_LINK_CAPABILITY		0x7C
#define PCIE_LINK_CTL_2			0xA0
#define TARGET_LINK_SPEED_MASK		0xF
#define LINK_SPEED_GEN_1		0x1
#define LINK_SPEED_GEN_2		0x2
#define LINK_SPEED_GEN_3		0x3

#define PCIE_GEN3_RELATED		0x890
#define GEN3_EQU_DISABLE		(1 << 16)
#define GEN3_ZRXDC_NON_COMP		(1 << 0)

#define PCIE_GEN3_EQU_CTRL		0x8A8
#define GEN3_EQU_EVAL_2MS_DISABLE	(1 << 5)

#define PCIE_ROOT_COMPLEX_MODE_MASK	(0xF << 4)

#define PCIE_LINK_UP_TIMEOUT_MS		100

#define PCIE_GLOBAL_CONTROL		0x8000
#define PCIE_APP_LTSSM_EN		(1 << 2)
#define PCIE_DEVICE_TYPE_OFFSET		(4)
#define PCIE_DEVICE_TYPE_MASK		(0xF)
#define PCIE_DEVICE_TYPE_EP		(0x0) /* Endpoint */
#define PCIE_DEVICE_TYPE_LEP		(0x1) /* Legacy endpoint */
#define PCIE_DEVICE_TYPE_RC		(0x4) /* Root complex */

#define PCIE_GLOBAL_STATUS		0x8008
#define PCIE_GLB_STS_RDLH_LINK_UP	(1 << 1)
#define PCIE_GLB_STS_PHY_LINK_UP	(1 << 9)

#define PCIE_ARCACHE_TRC		0x8050
#define PCIE_AWCACHE_TRC		0x8054
#define ARCACHE_SHAREABLE_CACHEABLE	0x3511
#define AWCACHE_SHAREABLE_CACHEABLE	0x5311

#define LINK_SPEED_GEN_1                0x1
#define LINK_SPEED_GEN_2                0x2
#define LINK_SPEED_GEN_3                0x3

/**
 * struct pcie_dw_mvebu - MVEBU DW PCIe controller state
 *
 * @ctrl_base: The base address of the register space
 * @cfg_base: The base address of the configuration space
 * @cfg_size: The size of the configuration space which is needed
 *            as it gets written into the PCIE_ATU_LIMIT register
 * @first_busno: This driver supports multiple PCIe controllers.
 *               first_busno stores the bus number of the PCIe root-port
 *               number which may vary depending on the PCIe setup
 *               (PEX switches etc).
 */
struct pcie_dw_mvebu {
	void *ctrl_base;
	void *cfg_base;
	fdt_size_t cfg_size;
	int first_busno;
};

static int pcie_dw_get_link_speed(const void *regs_base)
{
	return (readl(regs_base + PCIE_LINK_STATUS_REG) &
		PCIE_LINK_STATUS_SPEED_MASK) >> PCIE_LINK_STATUS_SPEED_OFF;
}

static int pcie_dw_get_link_width(const void *regs_base)
{
	return (readl(regs_base + PCIE_LINK_STATUS_REG) &
		PCIE_LINK_STATUS_WIDTH_MASK) >> PCIE_LINK_STATUS_WIDTH_OFF;
}

/**
 * set_cfg_address() - Configure the PCIe controller config space access
 *
 * @pcie: Pointer to the PCI controller state
 * @d: PCI device to access
 * @where: Offset in the configuration space
 *
 * Configures the PCIe controller to access the configuration space of
 * a specific PCIe device and returns the address to use for this
 * access.
 *
 * Return: Address that can be used to access the configation space
 *         of the requested device / offset
 */
static uintptr_t set_cfg_address(struct pcie_dw_mvebu *pcie,
				 pci_dev_t d, uint where)
{
	uintptr_t va_address;

	/*
	 * Region #0 is used for Outbound CFG space access.
	 * Direction = Outbound
	 * Region Index = 0
	 */
	writel(0, pcie->ctrl_base + PCIE_ATU_VIEWPORT);

	if (PCI_BUS(d) == (pcie->first_busno + 1))
		/* For local bus, change TLP Type field to 4. */
		writel(PCIE_ATU_TYPE_CFG0, pcie->ctrl_base + PCIE_ATU_CR1);
	else
		/* Otherwise, change TLP Type field to 5. */
		writel(PCIE_ATU_TYPE_CFG1, pcie->ctrl_base + PCIE_ATU_CR1);

	if (PCI_BUS(d) == pcie->first_busno) {
		/* Accessing root port configuration space. */
		va_address = (uintptr_t)pcie->ctrl_base;
	} else {
		d = PCI_MASK_BUS(d) | (PCI_BUS(d) - pcie->first_busno);
		writel(d << 8, pcie->ctrl_base + PCIE_ATU_LOWER_TARGET);
		va_address = (uintptr_t)pcie->cfg_base;
	}

	va_address += where & ~0x3;

	return va_address;
}

/**
 * pcie_dw_addr_valid() - Check for valid bus address
 *
 * @d: The PCI device to access
 * @first_busno: Bus number of the PCIe controller root complex
 *
 * Return 1 (true) if the PCI device can be accessed by this controller.
 *
 * Return: 1 on valid, 0 on invalid
 */
static int pcie_dw_addr_valid(pci_dev_t d, int first_busno)
{
	if ((PCI_BUS(d) == first_busno) && (PCI_DEV(d) > 0))
		return 0;
	if ((PCI_BUS(d) == first_busno + 1) && (PCI_DEV(d) > 0))
		return 0;

	return 1;
}

/**
 * pcie_dw_mvebu_read_config() - Read from configuration space
 *
 * @bus: Pointer to the PCI bus
 * @bdf: Identifies the PCIe device to access
 * @offset: The offset into the device's configuration space
 * @valuep: A pointer at which to store the read value
 * @size: Indicates the size of access to perform
 *
 * Read a value of size @size from offset @offset within the configuration
 * space of the device identified by the bus, device & function numbers in @bdf
 * on the PCI bus @bus.
 *
 * Return: 0 on success
 */
static int pcie_dw_mvebu_read_config(struct udevice *bus, pci_dev_t bdf,
				     uint offset, ulong *valuep,
				     enum pci_size_t size)
{
	struct pcie_dw_mvebu *pcie = dev_get_priv(bus);
	uintptr_t va_address;
	ulong value;

	debug("PCIE CFG read:  (b,d,f)=(%2d,%2d,%2d) ",
	      PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));

	if (!pcie_dw_addr_valid(bdf, pcie->first_busno)) {
		debug("- out of range\n");
		*valuep = pci_get_ff(size);
		return 0;
	}

	va_address = set_cfg_address(pcie, bdf, offset);

	value = readl(va_address);

	debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value);
	*valuep = pci_conv_32_to_size(value, offset, size);

	return 0;
}

/**
 * pcie_dw_mvebu_write_config() - Write to configuration space
 *
 * @bus: Pointer to the PCI bus
 * @bdf: Identifies the PCIe device to access
 * @offset: The offset into the device's configuration space
 * @value: The value to write
 * @size: Indicates the size of access to perform
 *
 * Write the value @value of size @size from offset @offset within the
 * configuration space of the device identified by the bus, device & function
 * numbers in @bdf on the PCI bus @bus.
 *
 * Return: 0 on success
 */
static int pcie_dw_mvebu_write_config(struct udevice *bus, pci_dev_t bdf,
				      uint offset, ulong value,
				      enum pci_size_t size)
{
	struct pcie_dw_mvebu *pcie = dev_get_priv(bus);
	uintptr_t va_address;
	ulong old;

	debug("PCIE CFG write: (b,d,f)=(%2d,%2d,%2d) ",
	      PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
	debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value);

	if (!pcie_dw_addr_valid(bdf, pcie->first_busno)) {
		debug("- out of range\n");
		return 0;
	}

	va_address = set_cfg_address(pcie, bdf, offset);

	old = readl(va_address);
	value = pci_conv_size_to_32(old, value, offset, size);
	writel(value, va_address);

	return 0;
}

/**
 * pcie_dw_configure() - Configure link capabilities and speed
 *
 * @regs_base: A pointer to the PCIe controller registers
 * @cap_speed: The capabilities and speed to configure
 *
 * Configure the link capabilities and speed in the PCIe root complex.
 */
static void pcie_dw_configure(const void *regs_base, u32 cap_speed)
{
	/*
	 * TODO (shadi@marvell.com, sr@denx.de):
	 * Need to read the serdes speed from the dts and according to it
	 * configure the PCIe gen
	 */

	/* Set link to GEN 3 */
	clrsetbits_le32(regs_base + PCIE_LINK_CTL_2,
			TARGET_LINK_SPEED_MASK, cap_speed);
	clrsetbits_le32(regs_base + PCIE_LINK_CAPABILITY,
			TARGET_LINK_SPEED_MASK, cap_speed);
	setbits_le32(regs_base + PCIE_GEN3_EQU_CTRL, GEN3_EQU_EVAL_2MS_DISABLE);
}

/**
 * is_link_up() - Return the link state
 *
 * @regs_base: A pointer to the PCIe controller registers
 *
 * Return: 1 (true) for active line and 0 (false) for no link
 */
static int is_link_up(const void *regs_base)
{
	u32 mask = PCIE_GLB_STS_RDLH_LINK_UP | PCIE_GLB_STS_PHY_LINK_UP;
	u32 reg;

	reg = readl(regs_base + PCIE_GLOBAL_STATUS);
	if ((reg & mask) == mask)
		return 1;

	return 0;
}

/**
 * wait_link_up() - Wait for the link to come up
 *
 * @regs_base: A pointer to the PCIe controller registers
 *
 * Return: 1 (true) for active line and 0 (false) for no link (timeout)
 */
static int wait_link_up(const void *regs_base)
{
	unsigned long timeout;

	timeout = get_timer(0) + PCIE_LINK_UP_TIMEOUT_MS;
	while (!is_link_up(regs_base)) {
		if (get_timer(0) > timeout)
			return 0;
	};

	return 1;
}

/**
 * pcie_dw_mvebu_pcie_link_up() - Configure the PCIe root port
 *
 * @regs_base: A pointer to the PCIe controller registers
 * @cap_speed: The capabilities and speed to configure
 *
 * Configure the PCIe controller root complex depending on the
 * requested link capabilities and speed.
 *
 * Return: 1 (true) for active line and 0 (false) for no link
 */
static int pcie_dw_mvebu_pcie_link_up(const void *regs_base, u32 cap_speed)
{
	if (!is_link_up(regs_base)) {
		/* Disable LTSSM state machine to enable configuration */
		clrbits_le32(regs_base + PCIE_GLOBAL_CONTROL,
			     PCIE_APP_LTSSM_EN);
	}

	clrsetbits_le32(regs_base + PCIE_GLOBAL_CONTROL,
			PCIE_DEVICE_TYPE_MASK << PCIE_DEVICE_TYPE_OFFSET,
			PCIE_DEVICE_TYPE_RC << PCIE_DEVICE_TYPE_OFFSET);

	/* Set the PCIe master AXI attributes */
	writel(ARCACHE_SHAREABLE_CACHEABLE, regs_base + PCIE_ARCACHE_TRC);
	writel(AWCACHE_SHAREABLE_CACHEABLE, regs_base + PCIE_AWCACHE_TRC);

	/* DW pre link configurations */
	pcie_dw_configure(regs_base, cap_speed);

	if (!is_link_up(regs_base)) {
		/* Configuration done. Start LTSSM */
		setbits_le32(regs_base + PCIE_GLOBAL_CONTROL,
			     PCIE_APP_LTSSM_EN);
	}

	/* Check that link was established */
	if (!wait_link_up(regs_base))
		return 0;

	/*
	 * Link can be established in Gen 1. still need to wait
	 * till MAC nagaotiation is completed
	 */
	udelay(100);

	return 1;
}

/**
 * pcie_dw_regions_setup() - iATU region setup
 *
 * @pcie: Pointer to the PCI controller state
 *
 * Configure the iATU regions in the PCIe controller for outbound access.
 */
static void pcie_dw_regions_setup(struct pcie_dw_mvebu *pcie)
{
	/*
	 * Region #0 is used for Outbound CFG space access.
	 * Direction = Outbound
	 * Region Index = 0
	 */
	writel(0, pcie->ctrl_base + PCIE_ATU_VIEWPORT);

	writel((u32)(uintptr_t)pcie->cfg_base, pcie->ctrl_base
	       + PCIE_ATU_LOWER_BASE);
	writel(0, pcie->ctrl_base + PCIE_ATU_UPPER_BASE);
	writel((u32)(uintptr_t)pcie->cfg_base + pcie->cfg_size,
	       pcie->ctrl_base + PCIE_ATU_LIMIT);

	writel(0, pcie->ctrl_base + PCIE_ATU_LOWER_TARGET);
	writel(0, pcie->ctrl_base + PCIE_ATU_UPPER_TARGET);
	writel(PCIE_ATU_TYPE_CFG0, pcie->ctrl_base + PCIE_ATU_CR1);
	writel(PCIE_ATU_ENABLE, pcie->ctrl_base + PCIE_ATU_CR2);
}

/**
 * pcie_dw_set_host_bars() - Configure the host BARs
 *
 * @regs_base: A pointer to the PCIe controller registers
 *
 * Configure the host BARs of the PCIe controller root port so that
 * PCI(e) devices may access the system memory.
 */
static void pcie_dw_set_host_bars(const void *regs_base)
{
	u32 size = gd->ram_size;
	u64 max_size;
	u32 reg;
	u32 bar0;

	/* Verify the maximal BAR size */
	reg = readl(regs_base + RESIZABLE_BAR_CAP);
	max_size = 1ULL << (5 + (reg + (1 << 4)));

	if (size > max_size) {
		size = max_size;
		printf("Warning: PCIe BARs can't map all DRAM space\n");
	}

	/* Set the BAR base and size towards DDR */
	bar0 = CONFIG_SYS_SDRAM_BASE & ~0xf;
	bar0 |= PCI_BASE_ADDRESS_MEM_TYPE_32;
	writel(CONFIG_SYS_SDRAM_BASE, regs_base + PCIE_CONFIG_BAR0);

	reg = ((size >> 20) - 1) << 12;
	writel(size, regs_base + RESIZABLE_BAR_CTL0);
}

/**
 * pcie_dw_mvebu_probe() - Probe the PCIe bus for active link
 *
 * @dev: A pointer to the device being operated on
 *
 * Probe for an active link on the PCIe bus and configure the controller
 * to enable this port.
 *
 * Return: 0 on success, else -ENODEV
 */
static int pcie_dw_mvebu_probe(struct udevice *dev)
{
	struct pcie_dw_mvebu *pcie = dev_get_priv(dev);
	struct udevice *ctlr = pci_get_controller(dev);
	struct pci_controller *hose = dev_get_uclass_priv(ctlr);
#ifdef CONFIG_DM_GPIO
	struct gpio_desc reset_gpio;

	gpio_request_by_name(dev, "marvell,reset-gpio", 0, &reset_gpio,
			     GPIOD_IS_OUT);
	/*
	 * Issue reset to add-in card trough the dedicated GPIO.
	 * Some boards are connecting the card reset pin to common system
	 * reset wire and others are using separate GPIO port.
	 * In the last case we have to release a reset of the addon card
	 * using this GPIO.
	 */
	if (dm_gpio_is_valid(&reset_gpio)) {
		dm_gpio_set_value(&reset_gpio, 1);
		mdelay(200);
	}
#else
	debug("PCIE Reset on GPIO support is missing\n");
#endif /* CONFIG_DM_GPIO */

	pcie->first_busno = dev->seq;

	/* Don't register host if link is down */
	if (!pcie_dw_mvebu_pcie_link_up(pcie->ctrl_base, LINK_SPEED_GEN_3)) {
		printf("PCIE-%d: Link down\n", dev->seq);
	} else {
		printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev->seq,
		       pcie_dw_get_link_speed(pcie->ctrl_base),
		       pcie_dw_get_link_width(pcie->ctrl_base),
		       hose->first_busno);
	}

	pcie_dw_regions_setup(pcie);

	/* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */
	clrsetbits_le32(pcie->ctrl_base + PCI_CLASS_REVISION,
			0xffff << 16, PCI_CLASS_BRIDGE_PCI << 16);

	pcie_dw_set_host_bars(pcie->ctrl_base);

	return 0;
}

/**
 * pcie_dw_mvebu_ofdata_to_platdata() - Translate from DT to device state
 *
 * @dev: A pointer to the device being operated on
 *
 * Translate relevant data from the device tree pertaining to device @dev into
 * state that the driver will later make use of. This state is stored in the
 * device's private data structure.
 *
 * Return: 0 on success, else -EINVAL
 */
static int pcie_dw_mvebu_ofdata_to_platdata(struct udevice *dev)
{
	struct pcie_dw_mvebu *pcie = dev_get_priv(dev);

	/* Get the controller base address */
	pcie->ctrl_base = (void *)devfdt_get_addr_index(dev, 0);
	if ((fdt_addr_t)pcie->ctrl_base == FDT_ADDR_T_NONE)
		return -EINVAL;

	/* Get the config space base address and size */
	pcie->cfg_base = (void *)devfdt_get_addr_size_index(dev, 1,
							 &pcie->cfg_size);
	if ((fdt_addr_t)pcie->cfg_base == FDT_ADDR_T_NONE)
		return -EINVAL;

	return 0;
}

static const struct dm_pci_ops pcie_dw_mvebu_ops = {
	.read_config	= pcie_dw_mvebu_read_config,
	.write_config	= pcie_dw_mvebu_write_config,
};

static const struct udevice_id pcie_dw_mvebu_ids[] = {
	{ .compatible = "marvell,armada8k-pcie" },
	{ }
};

U_BOOT_DRIVER(pcie_dw_mvebu) = {
	.name			= "pcie_dw_mvebu",
	.id			= UCLASS_PCI,
	.of_match		= pcie_dw_mvebu_ids,
	.ops			= &pcie_dw_mvebu_ops,
	.ofdata_to_platdata	= pcie_dw_mvebu_ofdata_to_platdata,
	.probe			= pcie_dw_mvebu_probe,
	.priv_auto_alloc_size	= sizeof(struct pcie_dw_mvebu),
};
Commit	Line	Data
182ba1a7 SA	1	/*
	2	* Copyright (C) 2015 Marvell International Ltd.
	3	*
	4	* Copyright (C) 2016 Stefan Roese <sr@denx.de>
	5	*
	6	* Based on:
	7	* - drivers/pci/pcie_imx.c
	8	* - drivers/pci/pci_mvebu.c
	9	* - drivers/pci/pcie_xilinx.c
	10	*
	11	* SPDX-License-Identifier: GPL-2.0+
	12	*/
	13
	14	#include <common.h>
	15	#include <dm.h>
	16	#include <pci.h>
	17	#include <asm/io.h>
130b53ec	18	#include <asm-generic/gpio.h>
182ba1a7 SA	19
	20	DECLARE_GLOBAL_DATA_PTR;
	21
	22	/* PCI Config space registers */
	23	#define PCIE_CONFIG_BAR0 0x10
	24	#define PCIE_LINK_STATUS_REG 0x80
	25	#define PCIE_LINK_STATUS_SPEED_OFF 16
	26	#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF)
	27	#define PCIE_LINK_STATUS_WIDTH_OFF 20
	28	#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF)
	29
	30	/* Resizable bar capability registers */
	31	#define RESIZABLE_BAR_CAP 0x250
	32	#define RESIZABLE_BAR_CTL0 0x254
	33	#define RESIZABLE_BAR_CTL1 0x258
	34
	35	/* iATU registers */
	36	#define PCIE_ATU_VIEWPORT 0x900
	37	#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
	38	#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
	39	#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
	40	#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
	41	#define PCIE_ATU_CR1 0x904
	42	#define PCIE_ATU_TYPE_MEM (0x0 << 0)
	43	#define PCIE_ATU_TYPE_IO (0x2 << 0)
	44	#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
	45	#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
	46	#define PCIE_ATU_CR2 0x908
	47	#define PCIE_ATU_ENABLE (0x1 << 31)
	48	#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
	49	#define PCIE_ATU_LOWER_BASE 0x90C
	50	#define PCIE_ATU_UPPER_BASE 0x910
	51	#define PCIE_ATU_LIMIT 0x914
	52	#define PCIE_ATU_LOWER_TARGET 0x918
	53	#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
	54	#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
	55	#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
	56	#define PCIE_ATU_UPPER_TARGET 0x91C
	57
	58	#define PCIE_LINK_CAPABILITY 0x7C
	59	#define PCIE_LINK_CTL_2 0xA0
	60	#define TARGET_LINK_SPEED_MASK 0xF
	61	#define LINK_SPEED_GEN_1 0x1
	62	#define LINK_SPEED_GEN_2 0x2
	63	#define LINK_SPEED_GEN_3 0x3
	64
	65	#define PCIE_GEN3_RELATED 0x890
	66	#define GEN3_EQU_DISABLE (1 << 16)
	67	#define GEN3_ZRXDC_NON_COMP (1 << 0)
	68
	69	#define PCIE_GEN3_EQU_CTRL 0x8A8
	70	#define GEN3_EQU_EVAL_2MS_DISABLE (1 << 5)
	71
	72	#define PCIE_ROOT_COMPLEX_MODE_MASK (0xF << 4)
	73
	74	#define PCIE_LINK_UP_TIMEOUT_MS 100
	75
	76	#define PCIE_GLOBAL_CONTROL 0x8000
	77	#define PCIE_APP_LTSSM_EN (1 << 2)
	78	#define PCIE_DEVICE_TYPE_OFFSET (4)
	79	#define PCIE_DEVICE_TYPE_MASK (0xF)
	80	#define PCIE_DEVICE_TYPE_EP (0x0) /* Endpoint */
	81	#define PCIE_DEVICE_TYPE_LEP (0x1) /* Legacy endpoint */
	82	#define PCIE_DEVICE_TYPE_RC (0x4) /* Root complex */
83
84	#define PCIE_GLOBAL_STATUS 0x8008
85	#define PCIE_GLB_STS_RDLH_LINK_UP (1 << 1)
86	#define PCIE_GLB_STS_PHY_LINK_UP (1 << 9)
87
88	#define PCIE_ARCACHE_TRC 0x8050
89	#define PCIE_AWCACHE_TRC 0x8054
90	#define ARCACHE_SHAREABLE_CACHEABLE 0x3511
91	#define AWCACHE_SHAREABLE_CACHEABLE 0x5311
92
93	#define LINK_SPEED_GEN_1 0x1
94	#define LINK_SPEED_GEN_2 0x2
95	#define LINK_SPEED_GEN_3 0x3
96
97	/**
98	* struct pcie_dw_mvebu - MVEBU DW PCIe controller state
99	*
100	* @ctrl_base: The base address of the register space
101	* @cfg_base: The base address of the configuration space
102	* @cfg_size: The size of the configuration space which is needed
103	* as it gets written into the PCIE_ATU_LIMIT register
104	* @first_busno: This driver supports multiple PCIe controllers.
105	* first_busno stores the bus number of the PCIe root-port
106	* number which may vary depending on the PCIe setup
107	* (PEX switches etc).
108	*/
109	struct pcie_dw_mvebu {
110	void *ctrl_base;
111	void *cfg_base;
112	fdt_size_t cfg_size;
113	int first_busno;
114	};
115
116	static int pcie_dw_get_link_speed(const void *regs_base)
117	{
118	return (readl(regs_base + PCIE_LINK_STATUS_REG) &
119	PCIE_LINK_STATUS_SPEED_MASK) >> PCIE_LINK_STATUS_SPEED_OFF;
120	}
121
122	static int pcie_dw_get_link_width(const void *regs_base)
123	{
124	return (readl(regs_base + PCIE_LINK_STATUS_REG) &
125	PCIE_LINK_STATUS_WIDTH_MASK) >> PCIE_LINK_STATUS_WIDTH_OFF;
126	}
127
128	/**
129	* set_cfg_address() - Configure the PCIe controller config space access
130	*
131	* @pcie: Pointer to the PCI controller state
132	* @d: PCI device to access
133	* @where: Offset in the configuration space
134	*
135	* Configures the PCIe controller to access the configuration space of
136	* a specific PCIe device and returns the address to use for this
137	* access.
138	*
139	* Return: Address that can be used to access the configation space
140	* of the requested device / offset
141	*/
142	static uintptr_t set_cfg_address(struct pcie_dw_mvebu *pcie,
143	pci_dev_t d, uint where)
144	{
145	uintptr_t va_address;
146
147	/*
148	* Region #0 is used for Outbound CFG space access.
149	* Direction = Outbound
150	* Region Index = 0
151	*/
152	writel(0, pcie->ctrl_base + PCIE_ATU_VIEWPORT);
153
154	if (PCI_BUS(d) == (pcie->first_busno + 1))
155	/* For local bus, change TLP Type field to 4. */
156	writel(PCIE_ATU_TYPE_CFG0, pcie->ctrl_base + PCIE_ATU_CR1);
157	else
158	/* Otherwise, change TLP Type field to 5. */
159	writel(PCIE_ATU_TYPE_CFG1, pcie->ctrl_base + PCIE_ATU_CR1);
160
161	if (PCI_BUS(d) == pcie->first_busno) {
162	/* Accessing root port configuration space. */
163	va_address = (uintptr_t)pcie->ctrl_base;
164	} else {
3977dcd5	165	d = PCI_MASK_BUS(d) \| (PCI_BUS(d) - pcie->first_busno);
182ba1a7 SA	166	writel(d << 8, pcie->ctrl_base + PCIE_ATU_LOWER_TARGET);
	167	va_address = (uintptr_t)pcie->cfg_base;
	168	}
	169
	170	va_address += where & ~0x3;
	171
	172	return va_address;
	173	}
	174
	175	/**
	176	* pcie_dw_addr_valid() - Check for valid bus address
	177	*
	178	* @d: The PCI device to access
	179	* @first_busno: Bus number of the PCIe controller root complex
	180	*
	181	* Return 1 (true) if the PCI device can be accessed by this controller.
	182	*
	183	* Return: 1 on valid, 0 on invalid
	184	*/
	185	static int pcie_dw_addr_valid(pci_dev_t d, int first_busno)
	186	{
	187	if ((PCI_BUS(d) == first_busno) && (PCI_DEV(d) > 0))
	188	return 0;
	189	if ((PCI_BUS(d) == first_busno + 1) && (PCI_DEV(d) > 0))
	190	return 0;
	191
	192	return 1;
	193	}
	194
	195	/**
	196	* pcie_dw_mvebu_read_config() - Read from configuration space
	197	*
	198	* @bus: Pointer to the PCI bus
	199	* @bdf: Identifies the PCIe device to access
	200	* @offset: The offset into the device's configuration space
	201	* @valuep: A pointer at which to store the read value
	202	* @size: Indicates the size of access to perform
	203	*
	204	* Read a value of size @size from offset @offset within the configuration
	205	* space of the device identified by the bus, device & function numbers in @bdf
	206	* on the PCI bus @bus.
	207	*
	208	* Return: 0 on success
	209	*/
	210	static int pcie_dw_mvebu_read_config(struct udevice *bus, pci_dev_t bdf,
	211	uint offset, ulong *valuep,
	212	enum pci_size_t size)
	213	{
	214	struct pcie_dw_mvebu *pcie = dev_get_priv(bus);
	215	uintptr_t va_address;
	216	ulong value;
	217
	218	debug("PCIE CFG read: (b,d,f)=(%2d,%2d,%2d) ",
	219	PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
	220
	221	if (!pcie_dw_addr_valid(bdf, pcie->first_busno)) {
	222	debug("- out of range\n");
	223	*valuep = pci_get_ff(size);
	224	return 0;
	225	}
	226
	227	va_address = set_cfg_address(pcie, bdf, offset);
	228
	229	value = readl(va_address);
230
231	debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value);
232	*valuep = pci_conv_32_to_size(value, offset, size);
233
234	return 0;
235	}
236
237	/**
238	* pcie_dw_mvebu_write_config() - Write to configuration space
239	*
240	* @bus: Pointer to the PCI bus
241	* @bdf: Identifies the PCIe device to access
242	* @offset: The offset into the device's configuration space
243	* @value: The value to write
244	* @size: Indicates the size of access to perform
245	*
246	* Write the value @value of size @size from offset @offset within the
247	* configuration space of the device identified by the bus, device & function
248	* numbers in @bdf on the PCI bus @bus.
249	*
250	* Return: 0 on success
251	*/
252	static int pcie_dw_mvebu_write_config(struct udevice *bus, pci_dev_t bdf,
253	uint offset, ulong value,
254	enum pci_size_t size)
255	{
256	struct pcie_dw_mvebu *pcie = dev_get_priv(bus);
257	uintptr_t va_address;
258	ulong old;
259
260	debug("PCIE CFG write: (b,d,f)=(%2d,%2d,%2d) ",
261	PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
262	debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value);
263
264	if (!pcie_dw_addr_valid(bdf, pcie->first_busno)) {
265	debug("- out of range\n");
266	return 0;
267	}
268
269	va_address = set_cfg_address(pcie, bdf, offset);
270
271	old = readl(va_address);
272	value = pci_conv_size_to_32(old, value, offset, size);
273	writel(value, va_address);
274
275	return 0;
276	}
277
278	/**
279	* pcie_dw_configure() - Configure link capabilities and speed
280	*
281	* @regs_base: A pointer to the PCIe controller registers
282	* @cap_speed: The capabilities and speed to configure
283	*
284	* Configure the link capabilities and speed in the PCIe root complex.
285	*/
286	static void pcie_dw_configure(const void *regs_base, u32 cap_speed)
287	{
288	/*
289	* TODO (shadi@marvell.com, sr@denx.de):
290	* Need to read the serdes speed from the dts and according to it
291	* configure the PCIe gen
292	*/
293
294	/* Set link to GEN 3 */
295	clrsetbits_le32(regs_base + PCIE_LINK_CTL_2,
296	TARGET_LINK_SPEED_MASK, cap_speed);
297	clrsetbits_le32(regs_base + PCIE_LINK_CAPABILITY,
298	TARGET_LINK_SPEED_MASK, cap_speed);
299	setbits_le32(regs_base + PCIE_GEN3_EQU_CTRL, GEN3_EQU_EVAL_2MS_DISABLE);
300	}
301
302	/**
303	* is_link_up() - Return the link state
304	*
305	* @regs_base: A pointer to the PCIe controller registers
306	*
307	* Return: 1 (true) for active line and 0 (false) for no link
308	*/
309	static int is_link_up(const void *regs_base)
310	{
311	u32 mask = PCIE_GLB_STS_RDLH_LINK_UP \| PCIE_GLB_STS_PHY_LINK_UP;
312	u32 reg;
313
314	reg = readl(regs_base + PCIE_GLOBAL_STATUS);
315	if ((reg & mask) == mask)
316	return 1;
317
318	return 0;
319	}
320
321	/**
322	* wait_link_up() - Wait for the link to come up
323	*
324	* @regs_base: A pointer to the PCIe controller registers
325	*
326	* Return: 1 (true) for active line and 0 (false) for no link (timeout)
327	*/
328	static int wait_link_up(const void *regs_base)
329	{
330	unsigned long timeout;
331
332	timeout = get_timer(0) + PCIE_LINK_UP_TIMEOUT_MS;
333	while (!is_link_up(regs_base)) {
334	if (get_timer(0) > timeout)
335	return 0;
336	};
337
338	return 1;
339	}
340
341	/**
342	* pcie_dw_mvebu_pcie_link_up() - Configure the PCIe root port
343	*
344	* @regs_base: A pointer to the PCIe controller registers
345	* @cap_speed: The capabilities and speed to configure
346	*
347	* Configure the PCIe controller root complex depending on the
348	* requested link capabilities and speed.
349	*
350	* Return: 1 (true) for active line and 0 (false) for no link
351	*/
352	static int pcie_dw_mvebu_pcie_link_up(const void *regs_base, u32 cap_speed)
353	{
354	if (!is_link_up(regs_base)) {
355	/* Disable LTSSM state machine to enable configuration */
356	clrbits_le32(regs_base + PCIE_GLOBAL_CONTROL,
357	PCIE_APP_LTSSM_EN);
358	}
359
360	clrsetbits_le32(regs_base + PCIE_GLOBAL_CONTROL,
361	PCIE_DEVICE_TYPE_MASK << PCIE_DEVICE_TYPE_OFFSET,
362	PCIE_DEVICE_TYPE_RC << PCIE_DEVICE_TYPE_OFFSET);
363
364	/* Set the PCIe master AXI attributes */
365	writel(ARCACHE_SHAREABLE_CACHEABLE, regs_base + PCIE_ARCACHE_TRC);
366	writel(AWCACHE_SHAREABLE_CACHEABLE, regs_base + PCIE_AWCACHE_TRC);
367
368	/* DW pre link configurations */
369	pcie_dw_configure(regs_base, cap_speed);
370
371	if (!is_link_up(regs_base)) {
372	/* Configuration done. Start LTSSM */
373	setbits_le32(regs_base + PCIE_GLOBAL_CONTROL,
374	PCIE_APP_LTSSM_EN);
375	}
376
377	/* Check that link was established */
378	if (!wait_link_up(regs_base))
379	return 0;
380
381	/*
382	* Link can be established in Gen 1. still need to wait
383	* till MAC nagaotiation is completed
384	*/
385	udelay(100);
386
387	return 1;
388	}
389
390	/**
391	* pcie_dw_regions_setup() - iATU region setup
392	*
393	* @pcie: Pointer to the PCI controller state
394	*
395	* Configure the iATU regions in the PCIe controller for outbound access.
396	*/
397	static void pcie_dw_regions_setup(struct pcie_dw_mvebu *pcie)
398	{
399	/*
400	* Region #0 is used for Outbound CFG space access.
401	* Direction = Outbound
402	* Region Index = 0
403	*/
404	writel(0, pcie->ctrl_base + PCIE_ATU_VIEWPORT);
405
406	writel((u32)(uintptr_t)pcie->cfg_base, pcie->ctrl_base
407	+ PCIE_ATU_LOWER_BASE);
408	writel(0, pcie->ctrl_base + PCIE_ATU_UPPER_BASE);
409	writel((u32)(uintptr_t)pcie->cfg_base + pcie->cfg_size,
410	pcie->ctrl_base + PCIE_ATU_LIMIT);
411
412	writel(0, pcie->ctrl_base + PCIE_ATU_LOWER_TARGET);
413	writel(0, pcie->ctrl_base + PCIE_ATU_UPPER_TARGET);
414	writel(PCIE_ATU_TYPE_CFG0, pcie->ctrl_base + PCIE_ATU_CR1);
415	writel(PCIE_ATU_ENABLE, pcie->ctrl_base + PCIE_ATU_CR2);
416	}
417
418	/**
419	* pcie_dw_set_host_bars() - Configure the host BARs
420	*
421	* @regs_base: A pointer to the PCIe controller registers
422	*
423	* Configure the host BARs of the PCIe controller root port so that
424	* PCI(e) devices may access the system memory.
425	*/
426	static void pcie_dw_set_host_bars(const void *regs_base)
427	{
428	u32 size = gd->ram_size;
429	u64 max_size;
430	u32 reg;
431	u32 bar0;
432
433	/* Verify the maximal BAR size */
434	reg = readl(regs_base + RESIZABLE_BAR_CAP);
435	max_size = 1ULL << (5 + (reg + (1 << 4)));
436
437	if (size > max_size) {
438	size = max_size;
439	printf("Warning: PCIe BARs can't map all DRAM space\n");
440	}
441
442	/* Set the BAR base and size towards DDR */
443	bar0 = CONFIG_SYS_SDRAM_BASE & ~0xf;
444	bar0 \|= PCI_BASE_ADDRESS_MEM_TYPE_32;
445	writel(CONFIG_SYS_SDRAM_BASE, regs_base + PCIE_CONFIG_BAR0);
446
447	reg = ((size >> 20) - 1) << 12;
448	writel(size, regs_base + RESIZABLE_BAR_CTL0);
449	}
450
451	/**
452	* pcie_dw_mvebu_probe() - Probe the PCIe bus for active link
453	*
454	* @dev: A pointer to the device being operated on
455	*
456	* Probe for an active link on the PCIe bus and configure the controller
457	* to enable this port.
458	*
459	* Return: 0 on success, else -ENODEV
460	*/
461	static int pcie_dw_mvebu_probe(struct udevice *dev)
462	{
463	struct pcie_dw_mvebu *pcie = dev_get_priv(dev);
464	struct udevice *ctlr = pci_get_controller(dev);
465	struct pci_controller *hose = dev_get_uclass_priv(ctlr);
130b53ec KP	466	#ifdef CONFIG_DM_GPIO
	467	struct gpio_desc reset_gpio;
	468
	469	gpio_request_by_name(dev, "marvell,reset-gpio", 0, &reset_gpio,
	470	GPIOD_IS_OUT);
	471	/*
	472	* Issue reset to add-in card trough the dedicated GPIO.
	473	* Some boards are connecting the card reset pin to common system
	474	* reset wire and others are using separate GPIO port.
	475	* In the last case we have to release a reset of the addon card
	476	* using this GPIO.
	477	*/
	478	if (dm_gpio_is_valid(&reset_gpio)) {
	479	dm_gpio_set_value(&reset_gpio, 1);
	480	mdelay(200);
	481	}
	482	#else
	483	debug("PCIE Reset on GPIO support is missing\n");
	484	#endif /* CONFIG_DM_GPIO */
182ba1a7 SA	485
	486	pcie->first_busno = dev->seq;
	487
	488	/* Don't register host if link is down */
	489	if (!pcie_dw_mvebu_pcie_link_up(pcie->ctrl_base, LINK_SPEED_GEN_3)) {
	490	printf("PCIE-%d: Link down\n", dev->seq);
3f75e0ce KP	491	} else {
	492	printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev->seq,
	493	pcie_dw_get_link_speed(pcie->ctrl_base),
	494	pcie_dw_get_link_width(pcie->ctrl_base),
	495	hose->first_busno);
182ba1a7 SA	496	}
182ba1a7 SA	497
182ba1a7 SA	498	pcie_dw_regions_setup(pcie);
	499
	500	/* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */
	501	clrsetbits_le32(pcie->ctrl_base + PCI_CLASS_REVISION,
	502	0xffff << 16, PCI_CLASS_BRIDGE_PCI << 16);
	503
	504	pcie_dw_set_host_bars(pcie->ctrl_base);
	505
	506	return 0;
	507	}
	508
	509	/**
	510	* pcie_dw_mvebu_ofdata_to_platdata() - Translate from DT to device state
	511	*
	512	* @dev: A pointer to the device being operated on
	513	*
	514	* Translate relevant data from the device tree pertaining to device @dev into
	515	* state that the driver will later make use of. This state is stored in the
	516	* device's private data structure.
	517	*
	518	* Return: 0 on success, else -EINVAL
	519	*/
	520	static int pcie_dw_mvebu_ofdata_to_platdata(struct udevice *dev)
	521	{
	522	struct pcie_dw_mvebu *pcie = dev_get_priv(dev);
	523
	524	/* Get the controller base address */
a821c4af	525	pcie->ctrl_base = (void *)devfdt_get_addr_index(dev, 0);
182ba1a7 SA	526	if ((fdt_addr_t)pcie->ctrl_base == FDT_ADDR_T_NONE)
	527	return -EINVAL;
	528
	529	/* Get the config space base address and size */
a821c4af	530	pcie->cfg_base = (void *)devfdt_get_addr_size_index(dev, 1,
182ba1a7 SA	531	&pcie->cfg_size);
	532	if ((fdt_addr_t)pcie->cfg_base == FDT_ADDR_T_NONE)
	533	return -EINVAL;
	534
	535	return 0;
	536	}
	537
	538	static const struct dm_pci_ops pcie_dw_mvebu_ops = {
	539	.read_config = pcie_dw_mvebu_read_config,
	540	.write_config = pcie_dw_mvebu_write_config,
	541	};
	542
	543	static const struct udevice_id pcie_dw_mvebu_ids[] = {
	544	{ .compatible = "marvell,armada8k-pcie" },
	545	{ }
	546	};
	547
	548	U_BOOT_DRIVER(pcie_dw_mvebu) = {
	549	.name = "pcie_dw_mvebu",
	550	.id = UCLASS_PCI,
	551	.of_match = pcie_dw_mvebu_ids,
	552	.ops = &pcie_dw_mvebu_ops,
	553	.ofdata_to_platdata = pcie_dw_mvebu_ofdata_to_platdata,
	554	.probe = pcie_dw_mvebu_probe,
	555	.priv_auto_alloc_size = sizeof(struct pcie_dw_mvebu),
	556	};