]> git.ipfire.org Git - people/ms/u-boot.git/blame - drivers/pwm/Kconfig
udoo_neo: Remove mmcautodetect option
[people/ms/u-boot.git] / drivers / pwm / Kconfig
CommitLineData
fc760cb8
SG
1config DM_PWM
2 bool "Enable support for pulse-width modulation devices (PWM)"
3 depends on DM
4 help
5 A pulse-width modulator emits a pulse of varying width and provides
6 control over the duty cycle (high and low time) of the signal. This
7 is often used to control a voltage level. The more time the PWM
8 spends in the 'high' state, the higher the voltage. The PWM's
9 frequency/period can be controlled along with the proportion of that
10 time that the signal is high.
0e23fd81 11
5c2dd4cd
SG
12config PWM_EXYNOS
13 bool "Enable support for the Exynos PWM"
14 depends on DM_PWM
15 help
16 This PWM is found on Samsung Exynos 5250 and other Samsung SoCs. It
17 supports a programmable period and duty cycle. A 32-bit counter is
18 used. It provides 5 channels which can be independently
19 programmed. Channel 4 (the last) is normally used as a timer.
20
0e23fd81
SG
21config PWM_ROCKCHIP
22 bool "Enable support for the Rockchip PWM"
23 depends on DM_PWM
24 help
25 This PWM is found on RK3288 and other Rockchip SoCs. It supports a
26 programmable period and duty cycle. A 32-bit counter is used.
27 Various options provided in the hardware (such as capture mode and
28 continuous/single-shot) are not supported by the driver.
41fa035c
SG
29
30config PWM_TEGRA
31 bool "Enable support for the Tegra PWM"
91c08afe 32 depends on DM_PWM
41fa035c
SG
33 help
34 This PWM is found on Tegra 20 and other Nvidia SoCs. It supports
35 four channels with a programmable period and duty cycle. Only a
36 32KHz clock is supported by the driver but the duty cycle is
37 configurable.