[people/ms/u-boot.git] / drivers / qe / qe.h

/*
 * Copyright (C) 2006 Freescale Semiconductor, Inc.
 *
 * Dave Liu <daveliu@freescale.com>
 * based on source code of Shlomi Gridish
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __QE_H__
#define __QE_H__

#include "common.h"

#define QE_NUM_OF_SNUM	28
#define QE_NUM_OF_BRGS	16
#define UCC_MAX_NUM	8

#define QE_DATAONLY_BASE	0
#define QE_DATAONLY_SIZE	(QE_MURAM_SIZE - QE_DATAONLY_BASE)

/* QE threads SNUM
*/
typedef enum qe_snum_state {
	QE_SNUM_STATE_USED,   /* used */
	QE_SNUM_STATE_FREE    /* free */
} qe_snum_state_e;

typedef struct qe_snum {
	u8		num;   /* snum  */
	qe_snum_state_e	state; /* state */
} qe_snum_t;

/* QE RISC allocation
*/
typedef enum qe_risc_allocation {
	QE_RISC_ALLOCATION_RISC1		= 1,  /* RISC 1 */
	QE_RISC_ALLOCATION_RISC2		= 2,  /* RISC 2 */
	QE_RISC_ALLOCATION_RISC1_AND_RISC2	= 3   /* RISC 1 or RISC 2 */
} qe_risc_allocation_e;

/* QE CECR commands for UCC fast.
*/
#define QE_CR_FLG			0x00010000
#define QE_RESET			0x80000000
#define QE_INIT_TX_RX			0x00000000
#define QE_INIT_RX			0x00000001
#define QE_INIT_TX			0x00000002
#define QE_ENTER_HUNT_MODE		0x00000003
#define QE_STOP_TX			0x00000004
#define QE_GRACEFUL_STOP_TX		0x00000005
#define QE_RESTART_TX			0x00000006
#define QE_SWITCH_COMMAND		0x00000007
#define QE_SET_GROUP_ADDRESS		0x00000008
#define QE_INSERT_CELL			0x00000009
#define QE_ATM_TRANSMIT			0x0000000a
#define QE_CELL_POOL_GET		0x0000000b
#define QE_CELL_POOL_PUT		0x0000000c
#define QE_IMA_HOST_CMD			0x0000000d
#define QE_ATM_MULTI_THREAD_INIT	0x00000011
#define QE_ASSIGN_PAGE			0x00000012
#define QE_START_FLOW_CONTROL		0x00000014
#define QE_STOP_FLOW_CONTROL		0x00000015
#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
#define QE_GRACEFUL_STOP_RX		0x0000001a
#define QE_RESTART_RX			0x0000001b

/* QE CECR Sub Block Code - sub block code of QE command.
*/
#define QE_CR_SUBBLOCK_INVALID		0x00000000
#define QE_CR_SUBBLOCK_USB		0x03200000
#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
#define QE_CR_SUBBLOCK_MCC1		0x03800000
#define QE_CR_SUBBLOCK_MCC2		0x03a00000
#define QE_CR_SUBBLOCK_MCC3		0x03000000
#define QE_CR_SUBBLOCK_IDMA1		0x02800000
#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
#define QE_CR_SUBBLOCK_HPAC		0x01e00000
#define QE_CR_SUBBLOCK_SPI1		0x01400000
#define QE_CR_SUBBLOCK_SPI2		0x01600000
#define QE_CR_SUBBLOCK_RAND		0x01c00000
#define QE_CR_SUBBLOCK_TIMER		0x01e00000
#define QE_CR_SUBBLOCK_GENERAL		0x03c00000

/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
*/
#define QE_CR_PROTOCOL_UNSPECIFIED	0x00 /* For all other protocols */
#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
#define QE_CR_PROTOCOL_ATM_POS		0x0A
#define QE_CR_PROTOCOL_ETHERNET		0x0C
#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
#define QE_CR_PROTOCOL_SHIFT		6

/* QE ASSIGN PAGE command
*/
#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT	17

/* Communication Direction.
*/
typedef enum comm_dir {
	COMM_DIR_NONE		= 0,
	COMM_DIR_RX		= 1,
	COMM_DIR_TX		= 2,
	COMM_DIR_RX_AND_TX	= 3
} comm_dir_e;

/* Clocks and BRG's
*/
typedef enum qe_clock {
	QE_CLK_NONE = 0,
	QE_BRG1,     /* Baud Rate Generator  1 */
	QE_BRG2,     /* Baud Rate Generator  2 */
	QE_BRG3,     /* Baud Rate Generator  3 */
	QE_BRG4,     /* Baud Rate Generator  4 */
	QE_BRG5,     /* Baud Rate Generator  5 */
	QE_BRG6,     /* Baud Rate Generator  6 */
	QE_BRG7,     /* Baud Rate Generator  7 */
	QE_BRG8,     /* Baud Rate Generator  8 */
	QE_BRG9,     /* Baud Rate Generator  9 */
	QE_BRG10,    /* Baud Rate Generator 10 */
	QE_BRG11,    /* Baud Rate Generator 11 */
	QE_BRG12,    /* Baud Rate Generator 12 */
	QE_BRG13,    /* Baud Rate Generator 13 */
	QE_BRG14,    /* Baud Rate Generator 14 */
	QE_BRG15,    /* Baud Rate Generator 15 */
	QE_BRG16,    /* Baud Rate Generator 16 */
	QE_CLK1,     /* Clock  1               */
	QE_CLK2,     /* Clock  2               */
	QE_CLK3,     /* Clock  3               */
	QE_CLK4,     /* Clock  4               */
	QE_CLK5,     /* Clock  5               */
	QE_CLK6,     /* Clock  6               */
	QE_CLK7,     /* Clock  7               */
	QE_CLK8,     /* Clock  8               */
	QE_CLK9,     /* Clock  9               */
	QE_CLK10,    /* Clock 10               */
	QE_CLK11,    /* Clock 11               */
	QE_CLK12,    /* Clock 12               */
	QE_CLK13,    /* Clock 13               */
	QE_CLK14,    /* Clock 14               */
	QE_CLK15,    /* Clock 15               */
	QE_CLK16,    /* Clock 16               */
	QE_CLK17,    /* Clock 17               */
	QE_CLK18,    /* Clock 18               */
	QE_CLK19,    /* Clock 19               */
	QE_CLK20,    /* Clock 20               */
	QE_CLK21,    /* Clock 21               */
	QE_CLK22,    /* Clock 22               */
	QE_CLK23,    /* Clock 23               */
	QE_CLK24,    /* Clock 24               */
	QE_CLK_DUMMY
} qe_clock_e;

/* QE CMXGCR register
*/
#define QE_CMXGCR_MII_ENET_MNG_MASK	0x00007000
#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12

/* QE CMXUCR registers
 */
#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F

/* QE BRG configuration register
*/
#define QE_BRGC_ENABLE			0x00010000
#define QE_BRGC_DIVISOR_SHIFT		1
#define QE_BRGC_DIVISOR_MAX		0xFFF
#define QE_BRGC_DIV16			1

/* QE SDMA registers
*/
#define QE_SDSR_BER1			0x02000000
#define QE_SDSR_BER2			0x01000000

#define QE_SDMR_GLB_1_MSK		0x80000000
#define QE_SDMR_ADR_SEL			0x20000000
#define QE_SDMR_BER1_MSK		0x02000000
#define QE_SDMR_BER2_MSK		0x01000000
#define QE_SDMR_EB1_MSK			0x00800000
#define QE_SDMR_ER1_MSK			0x00080000
#define QE_SDMR_ER2_MSK			0x00040000
#define QE_SDMR_CEN_MASK		0x0000E000
#define QE_SDMR_SBER_1			0x00000200
#define QE_SDMR_SBER_2			0x00000200
#define QE_SDMR_EB1_PR_MASK		0x000000C0
#define QE_SDMR_ER1_PR			0x00000008

#define QE_SDMR_CEN_SHIFT		13
#define QE_SDMR_EB1_PR_SHIFT		6

#define QE_SDTM_MSNUM_SHIFT		24

#define QE_SDEBCR_BA_MASK		0x01FFFFFF

/* Communication Processor */
#define QE_CP_CERCR_MEE		0x8000	/* Multi-user RAM ECC enable */
#define QE_CP_CERCR_IEE		0x4000	/* Instruction RAM ECC enable */
#define QE_CP_CERCR_CIR		0x0800	/* Common instruction RAM */

/* I-RAM */
#define QE_IRAM_IADD_AIE	0x80000000	/* Auto Increment Enable */
#define QE_IRAM_IADD_BADDR	0x00080000	/* Base Address */

/* Structure that defines QE firmware binary files.
 *
 * See doc/README.qe_firmware for a description of these fields.
 */
struct qe_firmware {
	struct qe_header {
		u32 length;  /* Length of the entire structure, in bytes */
		u8 magic[3];    /* Set to { 'Q', 'E', 'F' } */
		u8 version;     /* Version of this layout. First ver is '1' */
	} header;
	u8 id[62];      /* Null-terminated identifier string */
	u8 split;	/* 0 = shared I-RAM, 1 = split I-RAM */
	u8 count;       /* Number of microcode[] structures */
	struct {
		u16 model;   	/* The SOC model  */
		u8 major;       	/* The SOC revision major */
		u8 minor;       	/* The SOC revision minor */
	} __attribute__ ((packed)) soc;
	u8 padding[4];			/* Reserved, for alignment */
	u64 extended_modes;		/* Extended modes */
	u32 vtraps[8];		/* Virtual trap addresses */
	u8 reserved[4];			/* Reserved, for future expansion */
	struct qe_microcode {
		u8 id[32];      	/* Null-terminated identifier */
		u32 traps[16];       /* Trap addresses, 0 == ignore */
		u32 eccr;    	/* The value for the ECCR register */
		u32 iram_offset;     /* Offset into I-RAM for the code */
		u32 count;   	/* Number of 32-bit words of the code */
		u32 code_offset;     /* Offset of the actual microcode */
		u8 major;       	/* The microcode version major */
		u8 minor;       	/* The microcode version minor */
		u8 revision;		/* The microcode version revision */
		u8 padding;		/* Reserved, for alignment */
		u8 reserved[4];		/* Reserved, for future expansion */
	} __attribute__ ((packed)) microcode[1];
	/* All microcode binaries should be located here */
	/* CRC32 should be located here, after the microcode binaries */
} __attribute__ ((packed));

struct qe_firmware_info {
	char id[64];		/* Firmware name */
	u32 vtraps[8];		/* Virtual trap addresses */
	u64 extended_modes;	/* Extended modes */
};

void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign);
void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data);
uint qe_muram_alloc(uint size, uint align);
void *qe_muram_addr(uint offset);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
void qe_init(uint qe_base);
void qe_reset(void);
void qe_assign_page(uint snum, uint para_ram_base);
int qe_set_brg(uint brg, uint rate);
int qe_set_mii_clk_src(int ucc_num);
int qe_upload_firmware(const struct qe_firmware *firmware);
struct qe_firmware_info *qe_get_firmware_info(void);
void ft_qe_setup(void *blob);

#endif /* __QE_H__ */
Commit	Line	Data
7737d5c6 DL	1	/*
	2	* Copyright (C) 2006 Freescale Semiconductor, Inc.
	3	*
	4	* Dave Liu <daveliu@freescale.com>
	5	* based on source code of Shlomi Gridish
	6	*
	7	* This program is free software; you can redistribute it and/or
	8	* modify it under the terms of the GNU General Public License as
	9	* published by the Free Software Foundation; either version 2 of
	10	* the License, or (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	20	* MA 02111-1307 USA
	21	*/
	22
	23	#ifndef __QE_H__
	24	#define __QE_H__
	25
	26	#include "common.h"
	27
	28	#define QE_NUM_OF_SNUM 28
	29	#define QE_NUM_OF_BRGS 16
	30	#define UCC_MAX_NUM 8
	31
ff9658d7	32	#define QE_DATAONLY_BASE 0
24c3aca3	33	#define QE_DATAONLY_SIZE (QE_MURAM_SIZE - QE_DATAONLY_BASE)
7737d5c6 DL	34
	35	/* QE threads SNUM
	36	*/
	37	typedef enum qe_snum_state {
	38	QE_SNUM_STATE_USED, /* used */
	39	QE_SNUM_STATE_FREE /* free */
	40	} qe_snum_state_e;
	41
	42	typedef struct qe_snum {
	43	u8 num; /* snum */
	44	qe_snum_state_e state; /* state */
	45	} qe_snum_t;
	46
	47	/* QE RISC allocation
	48	*/
	49	typedef enum qe_risc_allocation {
	50	QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
	51	QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
	52	QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* RISC 1 or RISC 2 */
	53	} qe_risc_allocation_e;
	54
	55	/* QE CECR commands for UCC fast.
	56	*/
	57	#define QE_CR_FLG 0x00010000
	58	#define QE_RESET 0x80000000
	59	#define QE_INIT_TX_RX 0x00000000
	60	#define QE_INIT_RX 0x00000001
	61	#define QE_INIT_TX 0x00000002
	62	#define QE_ENTER_HUNT_MODE 0x00000003
	63	#define QE_STOP_TX 0x00000004
	64	#define QE_GRACEFUL_STOP_TX 0x00000005
	65	#define QE_RESTART_TX 0x00000006
	66	#define QE_SWITCH_COMMAND 0x00000007
	67	#define QE_SET_GROUP_ADDRESS 0x00000008
	68	#define QE_INSERT_CELL 0x00000009
	69	#define QE_ATM_TRANSMIT 0x0000000a
	70	#define QE_CELL_POOL_GET 0x0000000b
	71	#define QE_CELL_POOL_PUT 0x0000000c
	72	#define QE_IMA_HOST_CMD 0x0000000d
	73	#define QE_ATM_MULTI_THREAD_INIT 0x00000011
	74	#define QE_ASSIGN_PAGE 0x00000012
	75	#define QE_START_FLOW_CONTROL 0x00000014
	76	#define QE_STOP_FLOW_CONTROL 0x00000015
	77	#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
	78	#define QE_GRACEFUL_STOP_RX 0x0000001a
	79	#define QE_RESTART_RX 0x0000001b
	80
	81	/* QE CECR Sub Block Code - sub block code of QE command.
	82	*/
	83	#define QE_CR_SUBBLOCK_INVALID 0x00000000
	84	#define QE_CR_SUBBLOCK_USB 0x03200000
	85	#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
	86	#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
	87	#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
	88	#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
	89	#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
	90	#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
	91	#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
	92	#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
	93	#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
	94	#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
	95	#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
	96	#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
	97	#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
98	#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
99	#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
100	#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
101	#define QE_CR_SUBBLOCK_MCC1 0x03800000
102	#define QE_CR_SUBBLOCK_MCC2 0x03a00000
103	#define QE_CR_SUBBLOCK_MCC3 0x03000000
104	#define QE_CR_SUBBLOCK_IDMA1 0x02800000
105	#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
106	#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
107	#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
108	#define QE_CR_SUBBLOCK_HPAC 0x01e00000
109	#define QE_CR_SUBBLOCK_SPI1 0x01400000
110	#define QE_CR_SUBBLOCK_SPI2 0x01600000
111	#define QE_CR_SUBBLOCK_RAND 0x01c00000
112	#define QE_CR_SUBBLOCK_TIMER 0x01e00000
113	#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
114
115	/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
116	*/
117	#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
118	#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
119	#define QE_CR_PROTOCOL_ATM_POS 0x0A
120	#define QE_CR_PROTOCOL_ETHERNET 0x0C
121	#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
122	#define QE_CR_PROTOCOL_SHIFT 6
123
124	/* QE ASSIGN PAGE command
125	*/
126	#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT 17
127
128	/* Communication Direction.
129	*/
130	typedef enum comm_dir {
131	COMM_DIR_NONE = 0,
132	COMM_DIR_RX = 1,
133	COMM_DIR_TX = 2,
134	COMM_DIR_RX_AND_TX = 3
135	} comm_dir_e;
136
137	/* Clocks and BRG's
138	*/
139	typedef enum qe_clock {
140	QE_CLK_NONE = 0,
141	QE_BRG1, /* Baud Rate Generator 1 */
142	QE_BRG2, /* Baud Rate Generator 2 */
143	QE_BRG3, /* Baud Rate Generator 3 */
144	QE_BRG4, /* Baud Rate Generator 4 */
145	QE_BRG5, /* Baud Rate Generator 5 */
146	QE_BRG6, /* Baud Rate Generator 6 */
147	QE_BRG7, /* Baud Rate Generator 7 */
148	QE_BRG8, /* Baud Rate Generator 8 */
149	QE_BRG9, /* Baud Rate Generator 9 */
150	QE_BRG10, /* Baud Rate Generator 10 */
151	QE_BRG11, /* Baud Rate Generator 11 */
152	QE_BRG12, /* Baud Rate Generator 12 */
153	QE_BRG13, /* Baud Rate Generator 13 */
154	QE_BRG14, /* Baud Rate Generator 14 */
155	QE_BRG15, /* Baud Rate Generator 15 */
156	QE_BRG16, /* Baud Rate Generator 16 */
157	QE_CLK1, /* Clock 1 */
158	QE_CLK2, /* Clock 2 */
159	QE_CLK3, /* Clock 3 */
160	QE_CLK4, /* Clock 4 */
161	QE_CLK5, /* Clock 5 */
162	QE_CLK6, /* Clock 6 */
163	QE_CLK7, /* Clock 7 */
164	QE_CLK8, /* Clock 8 */
165	QE_CLK9, /* Clock 9 */
166	QE_CLK10, /* Clock 10 */
167	QE_CLK11, /* Clock 11 */
168	QE_CLK12, /* Clock 12 */
169	QE_CLK13, /* Clock 13 */
170	QE_CLK14, /* Clock 14 */
171	QE_CLK15, /* Clock 15 */
172	QE_CLK16, /* Clock 16 */
173	QE_CLK17, /* Clock 17 */
174	QE_CLK18, /* Clock 18 */
175	QE_CLK19, /* Clock 19 */
176	QE_CLK20, /* Clock 20 */
177	QE_CLK21, /* Clock 21 */
178	QE_CLK22, /* Clock 22 */
179	QE_CLK23, /* Clock 23 */
180	QE_CLK24, /* Clock 24 */
181	QE_CLK_DUMMY
182	} qe_clock_e;
183
184	/* QE CMXGCR register
185	*/
186	#define QE_CMXGCR_MII_ENET_MNG_MASK 0x00007000
187	#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
188
189	/* QE CMXUCR registers
190	*/
191	#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
192
193	/* QE BRG configuration register
194	*/
195	#define QE_BRGC_ENABLE 0x00010000
196	#define QE_BRGC_DIVISOR_SHIFT 1
197	#define QE_BRGC_DIVISOR_MAX 0xFFF
198	#define QE_BRGC_DIV16 1
199
200	/* QE SDMA registers
201	*/
202	#define QE_SDSR_BER1 0x02000000
203	#define QE_SDSR_BER2 0x01000000
204
205	#define QE_SDMR_GLB_1_MSK 0x80000000
206	#define QE_SDMR_ADR_SEL 0x20000000
207	#define QE_SDMR_BER1_MSK 0x02000000
208	#define QE_SDMR_BER2_MSK 0x01000000
209	#define QE_SDMR_EB1_MSK 0x00800000
210	#define QE_SDMR_ER1_MSK 0x00080000
211	#define QE_SDMR_ER2_MSK 0x00040000
212	#define QE_SDMR_CEN_MASK 0x0000E000
213	#define QE_SDMR_SBER_1 0x00000200
214	#define QE_SDMR_SBER_2 0x00000200
215	#define QE_SDMR_EB1_PR_MASK 0x000000C0
216	#define QE_SDMR_ER1_PR 0x00000008
217
218	#define QE_SDMR_CEN_SHIFT 13
219	#define QE_SDMR_EB1_PR_SHIFT 6
220
221	#define QE_SDTM_MSNUM_SHIFT 24
222
223	#define QE_SDEBCR_BA_MASK 0x01FFFFFF
224
b8ec2385 TT	225	/* Communication Processor */
	226	#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */
	227	#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */
	228	#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */
	229
	230	/* I-RAM */
	231	#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
	232	#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
	233
	234	/* Structure that defines QE firmware binary files.
	235	*
	236	* See doc/README.qe_firmware for a description of these fields.
	237	*/
	238	struct qe_firmware {
	239	struct qe_header {
	240	u32 length; /* Length of the entire structure, in bytes */
	241	u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */
	242	u8 version; /* Version of this layout. First ver is '1' */
	243	} header;
	244	u8 id[62]; /* Null-terminated identifier string */
	245	u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
	246	u8 count; /* Number of microcode[] structures */
	247	struct {
	248	u16 model; /* The SOC model */
	249	u8 major; /* The SOC revision major */
	250	u8 minor; /* The SOC revision minor */
	251	} __attribute__ ((packed)) soc;
	252	u8 padding[4]; /* Reserved, for alignment */
	253	u64 extended_modes; /* Extended modes */
	254	u32 vtraps[8]; /* Virtual trap addresses */
	255	u8 reserved[4]; /* Reserved, for future expansion */
	256	struct qe_microcode {
	257	u8 id[32]; /* Null-terminated identifier */
	258	u32 traps[16]; /* Trap addresses, 0 == ignore */
	259	u32 eccr; /* The value for the ECCR register */
	260	u32 iram_offset; /* Offset into I-RAM for the code */
	261	u32 count; /* Number of 32-bit words of the code */
	262	u32 code_offset; /* Offset of the actual microcode */
	263	u8 major; /* The microcode version major */
	264	u8 minor; /* The microcode version minor */
	265	u8 revision; /* The microcode version revision */
	266	u8 padding; /* Reserved, for alignment */
	267	u8 reserved[4]; /* Reserved, for future expansion */
	268	} __attribute__ ((packed)) microcode[1];
	269	/* All microcode binaries should be located here */
	270	/* CRC32 should be located here, after the microcode binaries */
	271	} __attribute__ ((packed));
	272
	273	struct qe_firmware_info {
	274	char id[64]; /* Firmware name */
	275	u32 vtraps[8]; /* Virtual trap addresses */
	276	u64 extended_modes; /* Extended modes */
	277	};
	278
7737d5c6 DL	279	void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign);
	280	void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data);
	281	uint qe_muram_alloc(uint size, uint align);
	282	void *qe_muram_addr(uint offset);
	283	int qe_get_snum(void);
	284	void qe_put_snum(u8 snum);
	285	void qe_init(uint qe_base);
	286	void qe_reset(void);
	287	void qe_assign_page(uint snum, uint para_ram_base);
	288	int qe_set_brg(uint brg, uint rate);
	289	int qe_set_mii_clk_src(int ucc_num);
b8ec2385 TT	290	int qe_upload_firmware(const struct qe_firmware *firmware);
b8ec2385 TT	291	struct qe_firmware_info *qe_get_firmware_info(void);
ed2cf548	292	void ft_qe_setup(void *blob);
7737d5c6 DL	293
7737d5c6 DL	294	#endif /* __QE_H__ */