]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | #include <linux/types.h> |
2 | #include <linux/mm.h> | |
5a0e3ad6 | 3 | #include <linux/slab.h> |
1da177e4 | 4 | #include <linux/blkdev.h> |
1da177e4 LT |
5 | #include <linux/ioport.h> |
6 | #include <linux/init.h> | |
7 | #include <linux/spinlock.h> | |
8 | #include <linux/interrupt.h> | |
9 | ||
10 | #include <asm/setup.h> | |
11 | #include <asm/page.h> | |
12 | #include <asm/pgtable.h> | |
13 | #include <asm/amigaints.h> | |
14 | #include <asm/amigahw.h> | |
15 | #include <asm/irq.h> | |
16 | ||
17 | #include "scsi.h" | |
18 | #include <scsi/scsi_host.h> | |
19 | #include "wd33c93.h" | |
20 | #include "a3000.h" | |
21 | ||
22 | #include<linux/stat.h> | |
23 | ||
24 | #define DMA(ptr) ((a3000_scsiregs *)((ptr)->base)) | |
25 | #define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) | |
26 | ||
27 | static struct Scsi_Host *a3000_host = NULL; | |
28 | ||
9387edbe AB |
29 | static int a3000_release(struct Scsi_Host *instance); |
30 | ||
7d12e780 | 31 | static irqreturn_t a3000_intr (int irq, void *dummy) |
1da177e4 LT |
32 | { |
33 | unsigned long flags; | |
34 | unsigned int status = DMA(a3000_host)->ISTR; | |
35 | ||
36 | if (!(status & ISTR_INT_P)) | |
37 | return IRQ_NONE; | |
38 | if (status & ISTR_INTS) | |
39 | { | |
40 | spin_lock_irqsave(a3000_host->host_lock, flags); | |
41 | wd33c93_intr (a3000_host); | |
42 | spin_unlock_irqrestore(a3000_host->host_lock, flags); | |
43 | return IRQ_HANDLED; | |
44 | } | |
45 | printk("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status); | |
46 | return IRQ_NONE; | |
47 | } | |
48 | ||
65396410 | 49 | static int dma_setup(struct scsi_cmnd *cmd, int dir_in) |
1da177e4 LT |
50 | { |
51 | unsigned short cntr = CNTR_PDMD | CNTR_INTEN; | |
52 | unsigned long addr = virt_to_bus(cmd->SCp.ptr); | |
53 | ||
54 | /* | |
55 | * if the physical address has the wrong alignment, or if | |
56 | * physical address is bad, or if it is a write and at the | |
57 | * end of a physical memory chunk, then allocate a bounce | |
58 | * buffer | |
59 | */ | |
7b892806 | 60 | if (addr & A3000_XFER_MASK) |
1da177e4 LT |
61 | { |
62 | HDATA(a3000_host)->dma_bounce_len = (cmd->SCp.this_residual + 511) | |
63 | & ~0x1ff; | |
64 | HDATA(a3000_host)->dma_bounce_buffer = | |
65 | kmalloc (HDATA(a3000_host)->dma_bounce_len, GFP_KERNEL); | |
66 | ||
67 | /* can't allocate memory; use PIO */ | |
68 | if (!HDATA(a3000_host)->dma_bounce_buffer) { | |
69 | HDATA(a3000_host)->dma_bounce_len = 0; | |
70 | return 1; | |
71 | } | |
72 | ||
73 | if (!dir_in) { | |
74 | /* copy to bounce buffer for a write */ | |
cc0455fa BH |
75 | memcpy (HDATA(a3000_host)->dma_bounce_buffer, |
76 | cmd->SCp.ptr, cmd->SCp.this_residual); | |
1da177e4 LT |
77 | } |
78 | ||
79 | addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer); | |
80 | } | |
81 | ||
82 | /* setup dma direction */ | |
83 | if (!dir_in) | |
84 | cntr |= CNTR_DDIR; | |
85 | ||
86 | /* remember direction */ | |
87 | HDATA(a3000_host)->dma_dir = dir_in; | |
88 | ||
89 | DMA(a3000_host)->CNTR = cntr; | |
90 | ||
91 | /* setup DMA *physical* address */ | |
92 | DMA(a3000_host)->ACR = addr; | |
93 | ||
94 | if (dir_in) | |
95 | /* invalidate any cache */ | |
96 | cache_clear (addr, cmd->SCp.this_residual); | |
97 | else | |
98 | /* push any dirty cache */ | |
99 | cache_push (addr, cmd->SCp.this_residual); | |
100 | ||
101 | /* start DMA */ | |
102 | mb(); /* make sure setup is completed */ | |
103 | DMA(a3000_host)->ST_DMA = 1; | |
104 | mb(); /* make sure DMA has started before next IO */ | |
105 | ||
106 | /* return success */ | |
107 | return 0; | |
108 | } | |
109 | ||
65396410 HK |
110 | static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, |
111 | int status) | |
1da177e4 LT |
112 | { |
113 | /* disable SCSI interrupts */ | |
114 | unsigned short cntr = CNTR_PDMD; | |
115 | ||
116 | if (!HDATA(instance)->dma_dir) | |
117 | cntr |= CNTR_DDIR; | |
118 | ||
119 | DMA(instance)->CNTR = cntr; | |
120 | mb(); /* make sure CNTR is updated before next IO */ | |
121 | ||
122 | /* flush if we were reading */ | |
123 | if (HDATA(instance)->dma_dir) { | |
124 | DMA(instance)->FLUSH = 1; | |
125 | mb(); /* don't allow prefetch */ | |
126 | while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) | |
127 | barrier(); | |
128 | mb(); /* no IO until FLUSH is done */ | |
129 | } | |
130 | ||
131 | /* clear a possible interrupt */ | |
132 | /* I think that this CINT is only necessary if you are | |
133 | * using the terminal count features. HM 7 Mar 1994 | |
134 | */ | |
135 | DMA(instance)->CINT = 1; | |
136 | ||
137 | /* stop DMA */ | |
138 | DMA(instance)->SP_DMA = 1; | |
139 | mb(); /* make sure DMA is stopped before next IO */ | |
140 | ||
141 | /* restore the CONTROL bits (minus the direction flag) */ | |
142 | DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; | |
143 | mb(); /* make sure CNTR is updated before next IO */ | |
144 | ||
145 | /* copy from a bounce buffer, if necessary */ | |
146 | if (status && HDATA(instance)->dma_bounce_buffer) { | |
cc0455fa | 147 | if (SCpnt) { |
1da177e4 LT |
148 | if (HDATA(instance)->dma_dir && SCpnt) |
149 | memcpy (SCpnt->SCp.ptr, | |
150 | HDATA(instance)->dma_bounce_buffer, | |
151 | SCpnt->SCp.this_residual); | |
152 | kfree (HDATA(instance)->dma_bounce_buffer); | |
153 | HDATA(instance)->dma_bounce_buffer = NULL; | |
154 | HDATA(instance)->dma_bounce_len = 0; | |
155 | } else { | |
1da177e4 LT |
156 | kfree (HDATA(instance)->dma_bounce_buffer); |
157 | HDATA(instance)->dma_bounce_buffer = NULL; | |
158 | HDATA(instance)->dma_bounce_len = 0; | |
159 | } | |
160 | } | |
161 | } | |
162 | ||
9387edbe | 163 | static int __init a3000_detect(struct scsi_host_template *tpnt) |
1da177e4 LT |
164 | { |
165 | wd33c93_regs regs; | |
166 | ||
167 | if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI)) | |
168 | return 0; | |
169 | if (!request_mem_region(0xDD0000, 256, "wd33c93")) | |
170 | return 0; | |
171 | ||
172 | tpnt->proc_name = "A3000"; | |
173 | tpnt->proc_info = &wd33c93_proc_info; | |
174 | ||
175 | a3000_host = scsi_register (tpnt, sizeof(struct WD33C93_hostdata)); | |
176 | if (a3000_host == NULL) | |
177 | goto fail_register; | |
178 | ||
179 | a3000_host->base = ZTWO_VADDR(0xDD0000); | |
180 | a3000_host->irq = IRQ_AMIGA_PORTS; | |
181 | DMA(a3000_host)->DAWR = DAWR_A3000; | |
182 | regs.SASR = &(DMA(a3000_host)->SASR); | |
183 | regs.SCMD = &(DMA(a3000_host)->SCMD); | |
be3cb3d8 TB |
184 | HDATA(a3000_host)->no_sync = 0xff; |
185 | HDATA(a3000_host)->fast = 0; | |
186 | HDATA(a3000_host)->dma_mode = CTRL_DMA; | |
1da177e4 | 187 | wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15); |
1d6f359a | 188 | if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI", |
1da177e4 LT |
189 | a3000_intr)) |
190 | goto fail_irq; | |
191 | DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN; | |
192 | ||
193 | return 1; | |
194 | ||
195 | fail_irq: | |
196 | wd33c93_release(); | |
197 | scsi_unregister(a3000_host); | |
198 | fail_register: | |
199 | release_mem_region(0xDD0000, 256); | |
200 | return 0; | |
201 | } | |
202 | ||
65396410 | 203 | static int a3000_bus_reset(struct scsi_cmnd *cmd) |
1da177e4 LT |
204 | { |
205 | /* FIXME perform bus-specific reset */ | |
df0ae249 JG |
206 | |
207 | /* FIXME 2: kill this entire function, which should | |
208 | cause mid-layer to call wd33c93_host_reset anyway? */ | |
68b3aa7c JG |
209 | |
210 | spin_lock_irq(cmd->device->host->host_lock); | |
1da177e4 | 211 | wd33c93_host_reset(cmd); |
68b3aa7c JG |
212 | spin_unlock_irq(cmd->device->host->host_lock); |
213 | ||
1da177e4 LT |
214 | return SUCCESS; |
215 | } | |
216 | ||
217 | #define HOSTS_C | |
218 | ||
d0be4a7d | 219 | static struct scsi_host_template driver_template = { |
1da177e4 LT |
220 | .proc_name = "A3000", |
221 | .name = "Amiga 3000 built-in SCSI", | |
222 | .detect = a3000_detect, | |
223 | .release = a3000_release, | |
224 | .queuecommand = wd33c93_queuecommand, | |
225 | .eh_abort_handler = wd33c93_abort, | |
226 | .eh_bus_reset_handler = a3000_bus_reset, | |
227 | .eh_host_reset_handler = wd33c93_host_reset, | |
228 | .can_queue = CAN_QUEUE, | |
229 | .this_id = 7, | |
230 | .sg_tablesize = SG_ALL, | |
231 | .cmd_per_lun = CMD_PER_LUN, | |
232 | .use_clustering = ENABLE_CLUSTERING | |
233 | }; | |
234 | ||
235 | ||
236 | #include "scsi_module.c" | |
237 | ||
9387edbe | 238 | static int a3000_release(struct Scsi_Host *instance) |
1da177e4 LT |
239 | { |
240 | wd33c93_release(); | |
241 | DMA(instance)->CNTR = 0; | |
242 | release_mem_region(0xDD0000, 256); | |
243 | free_irq(IRQ_AMIGA_PORTS, a3000_intr); | |
244 | return 1; | |
245 | } | |
246 | ||
247 | MODULE_LICENSE("GPL"); |