]>
Commit | Line | Data |
---|---|---|
8e585f02 TL |
1 | /* |
2 | * (C) Copyright 2004, Freescale, Inc | |
3 | * TsiChung Liew, Tsi-Chung.Liew@freescale.com. | |
4 | * | |
5 | * See file CREDITS for list of people who contributed to this | |
6 | * project. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License as | |
10 | * published by the Free Software Foundation; either version 2 of | |
11 | * the License, or (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
21 | * MA 02111-1307 USA | |
22 | * | |
23 | */ | |
24 | ||
25 | /* | |
26 | * Minimal serial functions needed to use one of the uart ports | |
27 | * as serial console interface. | |
28 | */ | |
29 | ||
30 | #include <common.h> | |
31 | #include <asm/mcfuart.h> | |
32 | ||
33 | DECLARE_GLOBAL_DATA_PTR; | |
34 | ||
35 | #ifdef CONFIG_MCFSERIAL | |
36 | int serial_init(void) | |
37 | { | |
38 | volatile uart_t *uart; | |
39 | u32 counter; | |
40 | ||
41 | uart = (volatile uart_t *)(CFG_UART_BASE); | |
42 | ||
43 | /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ | |
44 | uart->ucr = UART_UCR_RESET_RX; | |
45 | uart->ucr = UART_UCR_RESET_TX; | |
46 | uart->ucr = UART_UCR_RESET_ERROR; | |
47 | uart->ucr = UART_UCR_RESET_MR; | |
48 | __asm__("nop"); | |
49 | ||
50 | uart->uimr = 0; | |
51 | ||
52 | /* write to CSR: RX/TX baud rate from timers */ | |
53 | uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK); | |
54 | ||
55 | uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE); | |
56 | uart->umr = UART_UMR_SB_STOP_BITS_1; | |
57 | ||
58 | /* Setting up BaudRate */ | |
59 | counter = (u32) (gd->bus_clk / (gd->baudrate)); | |
60 | counter >>= 5; | |
61 | ||
62 | /* write to CTUR: divide counter upper byte */ | |
63 | uart->ubg1 = (u8) ((counter & 0xff00) >> 8); | |
64 | /* write to CTLR: divide counter lower byte */ | |
65 | uart->ubg2 = (u8) (counter & 0x00ff); | |
66 | ||
67 | uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED); | |
68 | ||
69 | return (0); | |
70 | } | |
71 | ||
72 | void serial_putc(const char c) | |
73 | { | |
74 | volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); | |
75 | ||
76 | if (c == '\n') | |
77 | serial_putc('\r'); | |
78 | ||
79 | /* Wait for last character to go. */ | |
80 | while (!(uart->usr & UART_USR_TXRDY)) ; | |
81 | ||
82 | uart->utb = c; | |
83 | } | |
84 | ||
85 | void serial_puts(const char *s) | |
86 | { | |
87 | while (*s) { | |
88 | serial_putc(*s++); | |
89 | } | |
90 | } | |
91 | ||
92 | int serial_getc(void) | |
93 | { | |
94 | volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); | |
95 | ||
96 | /* Wait for a character to arrive. */ | |
97 | while (!(uart->usr & UART_USR_RXRDY)) ; | |
98 | return uart->urb; | |
99 | } | |
100 | ||
101 | int serial_tstc(void) | |
102 | { | |
103 | volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); | |
104 | ||
105 | return (uart->usr & UART_USR_RXRDY); | |
106 | } | |
107 | ||
108 | void serial_setbrg(void) | |
109 | { | |
110 | volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); | |
111 | u32 counter; | |
112 | ||
113 | counter = ((gd->bus_clk / gd->baudrate)) >> 5; | |
114 | counter++; | |
115 | ||
116 | /* write to CTUR: divide counter upper byte */ | |
117 | uart->ubg1 = ((counter & 0xff00) >> 8); | |
118 | /* write to CTLR: divide counter lower byte */ | |
119 | uart->ubg2 = (counter & 0x00ff); | |
120 | ||
121 | uart->ucr = UART_UCR_RESET_RX; | |
122 | uart->ucr = UART_UCR_RESET_TX; | |
123 | ||
124 | uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; | |
125 | } | |
126 | #endif /* CONFIG_MCFSERIAL */ |