]>
Commit | Line | Data |
---|---|---|
78961a57 | 1 | /* |
ca632f55 | 2 | * Driver for LM70EVAL-LLP board for the LM70 sensor |
78961a57 KB |
3 | * |
4 | * Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
78961a57 KB |
15 | */ |
16 | ||
22de54a9 SM |
17 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
18 | ||
78961a57 KB |
19 | #include <linux/init.h> |
20 | #include <linux/module.h> | |
21 | #include <linux/kernel.h> | |
22 | #include <linux/delay.h> | |
23 | #include <linux/device.h> | |
24 | #include <linux/parport.h> | |
25 | #include <linux/sysfs.h> | |
26 | #include <linux/workqueue.h> | |
27 | ||
78961a57 KB |
28 | #include <linux/spi/spi.h> |
29 | #include <linux/spi/spi_bitbang.h> | |
30 | ||
78961a57 KB |
31 | /* |
32 | * The LM70 communicates with a host processor using a 3-wire variant of | |
33 | * the SPI/Microwire bus interface. This driver specifically supports an | |
34 | * NS LM70 LLP Evaluation Board, interfacing to a PC using its parallel | |
35 | * port to bitbang an SPI-parport bridge. Accordingly, this is an SPI | |
36 | * master controller driver. The hwmon/lm70 driver is a "SPI protocol | |
37 | * driver", layered on top of this one and usable without the lm70llp. | |
38 | * | |
2b730051 | 39 | * Datasheet and Schematic: |
78961a57 KB |
40 | * The LM70 is a temperature sensor chip from National Semiconductor; its |
41 | * datasheet is available at http://www.national.com/pf/LM/LM70.html | |
2b730051 KB |
42 | * The schematic for this particular board (the LM70EVAL-LLP) is |
43 | * available (on page 4) here: | |
44 | * http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf | |
78961a57 KB |
45 | * |
46 | * Also see Documentation/spi/spi-lm70llp. The SPI<->parport code here is | |
47 | * (heavily) based on spi-butterfly by David Brownell. | |
48 | * | |
49 | * The LM70 LLP connects to the PC parallel port in the following manner: | |
50 | * | |
51 | * Parallel LM70 LLP | |
52 | * Port Direction JP2 Header | |
53 | * ----------- --------- ------------ | |
54 | * D0 2 - - | |
55 | * D1 3 --> V+ 5 | |
56 | * D2 4 --> V+ 5 | |
57 | * D3 5 --> V+ 5 | |
58 | * D4 6 --> V+ 5 | |
59 | * D5 7 --> nCS 8 | |
60 | * D6 8 --> SCLK 3 | |
61 | * D7 9 --> SI/O 5 | |
62 | * GND 25 - GND 7 | |
63 | * Select 13 <-- SI/O 1 | |
64 | * | |
65 | * Note that parport pin 13 actually gets inverted by the transistor | |
66 | * arrangement which lets either the parport or the LM70 drive the | |
2b730051 | 67 | * SI/SO signal (see the schematic for details). |
78961a57 KB |
68 | */ |
69 | ||
70 | #define DRVNAME "spi-lm70llp" | |
71 | ||
72 | #define lm70_INIT 0xBE | |
73 | #define SIO 0x10 | |
74 | #define nCS 0x20 | |
75 | #define SCLK 0x40 | |
76 | ||
77 | /*-------------------------------------------------------------------------*/ | |
78 | ||
79 | struct spi_lm70llp { | |
80 | struct spi_bitbang bitbang; | |
81 | struct parport *port; | |
82 | struct pardevice *pd; | |
83 | struct spi_device *spidev_lm70; | |
84 | struct spi_board_info info; | |
49dce689 | 85 | //struct device *dev; |
78961a57 KB |
86 | }; |
87 | ||
88 | /* REVISIT : ugly global ; provides "exclusive open" facility */ | |
89 | static struct spi_lm70llp *lm70llp; | |
90 | ||
78961a57 KB |
91 | /*-------------------------------------------------------------------*/ |
92 | ||
93 | static inline struct spi_lm70llp *spidev_to_pp(struct spi_device *spi) | |
94 | { | |
95 | return spi->controller_data; | |
96 | } | |
97 | ||
98 | /*---------------------- LM70 LLP eval board-specific inlines follow */ | |
99 | ||
100 | /* NOTE: we don't actually need to reread the output values, since they'll | |
101 | * still be what we wrote before. Plus, going through parport builds in | |
102 | * a ~1ms/operation delay; these SPI transfers could easily be faster. | |
103 | */ | |
104 | ||
105 | static inline void deassertCS(struct spi_lm70llp *pp) | |
106 | { | |
107 | u8 data = parport_read_data(pp->port); | |
2b730051 KB |
108 | |
109 | data &= ~0x80; /* pull D7/SI-out low while de-asserted */ | |
78961a57 KB |
110 | parport_write_data(pp->port, data | nCS); |
111 | } | |
112 | ||
113 | static inline void assertCS(struct spi_lm70llp *pp) | |
114 | { | |
115 | u8 data = parport_read_data(pp->port); | |
2b730051 KB |
116 | |
117 | data |= 0x80; /* pull D7/SI-out high so lm70 drives SO-in */ | |
78961a57 KB |
118 | parport_write_data(pp->port, data & ~nCS); |
119 | } | |
120 | ||
121 | static inline void clkHigh(struct spi_lm70llp *pp) | |
122 | { | |
123 | u8 data = parport_read_data(pp->port); | |
832329d7 | 124 | |
78961a57 KB |
125 | parport_write_data(pp->port, data | SCLK); |
126 | } | |
127 | ||
128 | static inline void clkLow(struct spi_lm70llp *pp) | |
129 | { | |
130 | u8 data = parport_read_data(pp->port); | |
832329d7 | 131 | |
78961a57 KB |
132 | parport_write_data(pp->port, data & ~SCLK); |
133 | } | |
134 | ||
135 | /*------------------------- SPI-LM70-specific inlines ----------------------*/ | |
136 | ||
137 | static inline void spidelay(unsigned d) | |
138 | { | |
139 | udelay(d); | |
140 | } | |
141 | ||
142 | static inline void setsck(struct spi_device *s, int is_on) | |
143 | { | |
144 | struct spi_lm70llp *pp = spidev_to_pp(s); | |
145 | ||
146 | if (is_on) | |
147 | clkHigh(pp); | |
148 | else | |
149 | clkLow(pp); | |
150 | } | |
151 | ||
152 | static inline void setmosi(struct spi_device *s, int is_on) | |
153 | { | |
154 | /* FIXME update D7 ... this way we can put the chip | |
155 | * into shutdown mode and read the manufacturer ID, | |
156 | * but we can't put it back into operational mode. | |
157 | */ | |
158 | } | |
159 | ||
160 | /* | |
161 | * getmiso: | |
162 | * Why do we return 0 when the SIO line is high and vice-versa? | |
163 | * The fact is, the lm70 eval board from NS (which this driver drives), | |
164 | * is wired in just such a way : when the lm70's SIO goes high, a transistor | |
165 | * switches it to low reflecting this on the parport (pin 13), and vice-versa. | |
166 | */ | |
167 | static inline int getmiso(struct spi_device *s) | |
168 | { | |
169 | struct spi_lm70llp *pp = spidev_to_pp(s); | |
832329d7 | 170 | |
74bdced4 | 171 | return ((SIO == (parport_read_status(pp->port) & SIO)) ? 0 : 1); |
78961a57 | 172 | } |
832329d7 | 173 | |
78961a57 KB |
174 | /*--------------------------------------------------------------------*/ |
175 | ||
ca632f55 | 176 | #include "spi-bitbang-txrx.h" |
78961a57 KB |
177 | |
178 | static void lm70_chipselect(struct spi_device *spi, int value) | |
179 | { | |
180 | struct spi_lm70llp *pp = spidev_to_pp(spi); | |
181 | ||
182 | if (value) | |
183 | assertCS(pp); | |
184 | else | |
185 | deassertCS(pp); | |
186 | } | |
187 | ||
188 | /* | |
189 | * Our actual bitbanger routine. | |
190 | */ | |
304d3436 LB |
191 | static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits, |
192 | unsigned flags) | |
78961a57 | 193 | { |
304d3436 | 194 | return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits); |
78961a57 KB |
195 | } |
196 | ||
197 | static void spi_lm70llp_attach(struct parport *p) | |
198 | { | |
199 | struct pardevice *pd; | |
200 | struct spi_lm70llp *pp; | |
201 | struct spi_master *master; | |
202 | int status; | |
2baed30c | 203 | struct pardev_cb lm70llp_cb; |
78961a57 KB |
204 | |
205 | if (lm70llp) { | |
22de54a9 | 206 | pr_warn("spi_lm70llp instance already loaded. Aborting.\n"); |
78961a57 KB |
207 | return; |
208 | } | |
209 | ||
210 | /* TODO: this just _assumes_ a lm70 is there ... no probe; | |
211 | * the lm70 driver could verify it, reading the manf ID. | |
212 | */ | |
213 | ||
214 | master = spi_alloc_master(p->physport->dev, sizeof *pp); | |
215 | if (!master) { | |
216 | status = -ENOMEM; | |
217 | goto out_fail; | |
218 | } | |
219 | pp = spi_master_get_devdata(master); | |
220 | ||
78961a57 KB |
221 | /* |
222 | * SPI and bitbang hookup. | |
223 | */ | |
94c69f76 | 224 | pp->bitbang.master = master; |
78961a57 KB |
225 | pp->bitbang.chipselect = lm70_chipselect; |
226 | pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx; | |
227 | pp->bitbang.flags = SPI_3WIRE; | |
228 | ||
229 | /* | |
230 | * Parport hookup | |
231 | */ | |
232 | pp->port = p; | |
2baed30c SM |
233 | memset(&lm70llp_cb, 0, sizeof(lm70llp_cb)); |
234 | lm70llp_cb.private = pp; | |
235 | lm70llp_cb.flags = PARPORT_FLAG_EXCL; | |
236 | pd = parport_register_dev_model(p, DRVNAME, &lm70llp_cb, 0); | |
237 | ||
78961a57 KB |
238 | if (!pd) { |
239 | status = -ENOMEM; | |
240 | goto out_free_master; | |
241 | } | |
242 | pp->pd = pd; | |
243 | ||
244 | status = parport_claim(pd); | |
245 | if (status < 0) | |
246 | goto out_parport_unreg; | |
247 | ||
248 | /* | |
249 | * Start SPI ... | |
250 | */ | |
251 | status = spi_bitbang_start(&pp->bitbang); | |
252 | if (status < 0) { | |
46c52c28 SM |
253 | dev_warn(&pd->dev, "spi_bitbang_start failed with status %d\n", |
254 | status); | |
78961a57 KB |
255 | goto out_off_and_release; |
256 | } | |
257 | ||
258 | /* | |
259 | * The modalias name MUST match the device_driver name | |
260 | * for the bus glue code to match and subsequently bind them. | |
261 | * We are binding to the generic drivers/hwmon/lm70.c device | |
262 | * driver. | |
263 | */ | |
264 | strcpy(pp->info.modalias, "lm70"); | |
265 | pp->info.max_speed_hz = 6 * 1000 * 1000; | |
266 | pp->info.chip_select = 0; | |
267 | pp->info.mode = SPI_3WIRE | SPI_MODE_0; | |
268 | ||
269 | /* power up the chip, and let the LM70 control SI/SO */ | |
270 | parport_write_data(pp->port, lm70_INIT); | |
271 | ||
272 | /* Enable access to our primary data structure via | |
273 | * the board info's (void *)controller_data. | |
274 | */ | |
275 | pp->info.controller_data = pp; | |
276 | pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info); | |
277 | if (pp->spidev_lm70) | |
278 | dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n", | |
44dc0fdd | 279 | dev_name(&pp->spidev_lm70->dev)); |
78961a57 | 280 | else { |
46c52c28 | 281 | dev_warn(&pd->dev, "spi_new_device failed\n"); |
78961a57 KB |
282 | status = -ENODEV; |
283 | goto out_bitbang_stop; | |
284 | } | |
2b730051 | 285 | pp->spidev_lm70->bits_per_word = 8; |
78961a57 KB |
286 | |
287 | lm70llp = pp; | |
78961a57 KB |
288 | return; |
289 | ||
290 | out_bitbang_stop: | |
291 | spi_bitbang_stop(&pp->bitbang); | |
292 | out_off_and_release: | |
293 | /* power down */ | |
294 | parport_write_data(pp->port, 0); | |
295 | mdelay(10); | |
296 | parport_release(pp->pd); | |
297 | out_parport_unreg: | |
298 | parport_unregister_device(pd); | |
299 | out_free_master: | |
25fb1a46 | 300 | spi_master_put(master); |
78961a57 | 301 | out_fail: |
22de54a9 | 302 | pr_info("spi_lm70llp probe fail, status %d\n", status); |
78961a57 KB |
303 | } |
304 | ||
305 | static void spi_lm70llp_detach(struct parport *p) | |
306 | { | |
307 | struct spi_lm70llp *pp; | |
308 | ||
309 | if (!lm70llp || lm70llp->port != p) | |
310 | return; | |
311 | ||
312 | pp = lm70llp; | |
313 | spi_bitbang_stop(&pp->bitbang); | |
314 | ||
315 | /* power down */ | |
316 | parport_write_data(pp->port, 0); | |
78961a57 KB |
317 | |
318 | parport_release(pp->pd); | |
319 | parport_unregister_device(pp->pd); | |
320 | ||
25fb1a46 | 321 | spi_master_put(pp->bitbang.master); |
78961a57 KB |
322 | |
323 | lm70llp = NULL; | |
324 | } | |
325 | ||
78961a57 KB |
326 | static struct parport_driver spi_lm70llp_drv = { |
327 | .name = DRVNAME, | |
2baed30c | 328 | .match_port = spi_lm70llp_attach, |
78961a57 | 329 | .detach = spi_lm70llp_detach, |
2baed30c | 330 | .devmodel = true, |
78961a57 KB |
331 | }; |
332 | ||
333 | static int __init init_spi_lm70llp(void) | |
334 | { | |
335 | return parport_register_driver(&spi_lm70llp_drv); | |
336 | } | |
337 | module_init(init_spi_lm70llp); | |
338 | ||
339 | static void __exit cleanup_spi_lm70llp(void) | |
340 | { | |
341 | parport_unregister_driver(&spi_lm70llp_drv); | |
342 | } | |
343 | module_exit(cleanup_spi_lm70llp); | |
344 | ||
345 | MODULE_AUTHOR("Kaiwan N Billimoria <kaiwan@designergraphix.com>"); | |
346 | MODULE_DESCRIPTION( | |
347 | "Parport adapter for the National Semiconductor LM70 LLP eval board"); | |
348 | MODULE_LICENSE("GPL"); |