[people/ms/u-boot.git] / drivers / thermal / imx_thermal.c

/*
 * (C) Copyright 2014 Freescale Semiconductor, Inc.
 * Author: Nitin Garg <nitin.garg@freescale.com>
 *             Ye Li <Ye.Li@freescale.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <config.h>
#include <common.h>
#include <div64.h>
#include <fuse.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <dm.h>
#include <errno.h>
#include <malloc.h>
#include <thermal.h>
#include <imx_thermal.h>

/* board will busyloop until this many degrees C below CPU max temperature */
#define TEMPERATURE_HOT_DELTA   5 /* CPU maxT - 5C */
#define FACTOR0			10000000
#define FACTOR1			15976
#define FACTOR2			4297157
#define MEASURE_FREQ		327
#define TEMPERATURE_MIN         -40
#define TEMPERATURE_HOT         85
#define TEMPERATURE_MAX         125

#define TEMPSENSE0_TEMP_CNT_SHIFT	8
#define TEMPSENSE0_TEMP_CNT_MASK	(0xfff << TEMPSENSE0_TEMP_CNT_SHIFT)
#define TEMPSENSE0_FINISHED		(1 << 2)
#define TEMPSENSE0_MEASURE_TEMP		(1 << 1)
#define TEMPSENSE0_POWER_DOWN		(1 << 0)
#define MISC0_REFTOP_SELBIASOFF		(1 << 3)
#define TEMPSENSE1_MEASURE_FREQ		0xffff

struct thermal_data {
	unsigned int fuse;
	int critical;
	int minc;
	int maxc;
};

#if defined(CONFIG_MX6)
static int read_cpu_temperature(struct udevice *dev)
{
	int temperature;
	unsigned int reg, n_meas;
	const struct imx_thermal_plat *pdata = dev_get_platdata(dev);
	struct anatop_regs *anatop = (struct anatop_regs *)pdata->regs;
	struct thermal_data *priv = dev_get_priv(dev);
	u32 fuse = priv->fuse;
	int t1, n1;
	u32 c1, c2;
	u64 temp64;

	/*
	 * Sensor data layout:
	 *   [31:20] - sensor value @ 25C
	 * We use universal formula now and only need sensor value @ 25C
	 * slope = 0.4297157 - (0.0015976 * 25C fuse)
	 */
	n1 = fuse >> 20;
	t1 = 25; /* t1 always 25C */

	/*
	 * Derived from linear interpolation:
	 * slope = 0.4297157 - (0.0015976 * 25C fuse)
	 * slope = (FACTOR2 - FACTOR1 * n1) / FACTOR0
	 * (Nmeas - n1) / (Tmeas - t1) = slope
	 * We want to reduce this down to the minimum computation necessary
	 * for each temperature read.  Also, we want Tmeas in millicelsius
	 * and we don't want to lose precision from integer division. So...
	 * Tmeas = (Nmeas - n1) / slope + t1
	 * milli_Tmeas = 1000 * (Nmeas - n1) / slope + 1000 * t1
	 * milli_Tmeas = -1000 * (n1 - Nmeas) / slope + 1000 * t1
	 * Let constant c1 = (-1000 / slope)
	 * milli_Tmeas = (n1 - Nmeas) * c1 + 1000 * t1
	 * Let constant c2 = n1 *c1 + 1000 * t1
	 * milli_Tmeas = c2 - Nmeas * c1
	 */
	temp64 = FACTOR0;
	temp64 *= 1000;
	do_div(temp64, FACTOR1 * n1 - FACTOR2);
	c1 = temp64;
	c2 = n1 * c1 + 1000 * t1;

	/*
	 * now we only use single measure, every time we read
	 * the temperature, we will power on/down anadig thermal
	 * module
	 */
	writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_clr);
	writel(MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);

	/* setup measure freq */
	reg = readl(&anatop->tempsense1);
	reg &= ~TEMPSENSE1_MEASURE_FREQ;
	reg |= MEASURE_FREQ;
	writel(reg, &anatop->tempsense1);

	/* start the measurement process */
	writel(TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_clr);
	writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
	writel(TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_set);

	/* make sure that the latest temp is valid */
	while ((readl(&anatop->tempsense0) &
		TEMPSENSE0_FINISHED) == 0)
		udelay(10000);

	/* read temperature count */
	reg = readl(&anatop->tempsense0);
	n_meas = (reg & TEMPSENSE0_TEMP_CNT_MASK)
		>> TEMPSENSE0_TEMP_CNT_SHIFT;
	writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);

	/* milli_Tmeas = c2 - Nmeas * c1 */
	temperature = (long)(c2 - n_meas * c1)/1000;

	/* power down anatop thermal sensor */
	writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_set);
	writel(MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_clr);

	return temperature;
}
#elif defined(CONFIG_MX7)
static int read_cpu_temperature(struct udevice *dev)
{
	unsigned int reg, tmp;
	unsigned int raw_25c, te1;
	int temperature;
	unsigned int *priv = dev_get_priv(dev);
	u32 fuse = *priv;
	struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *)
						 ANATOP_BASE_ADDR;
	/*
	 * fuse data layout:
	 * [31:21] sensor value @ 25C
	 * [20:18] hot temperature value
	 * [17:9] sensor value of room
	 * [8:0] sensor value of hot
	 */

	raw_25c = fuse >> 21;
	if (raw_25c == 0)
		raw_25c = 25;

	te1 = (fuse >> 9) & 0x1ff;

	/*
	 * now we only use single measure, every time we read
	 * the temperature, we will power on/down anadig thermal
	 * module
	 */
	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_MASK, &ccm_anatop->tempsense1_clr);
	writel(PMU_REF_REFTOP_SELFBIASOFF_MASK, &ccm_anatop->ref_set);

	/* write measure freq */
	reg = readl(&ccm_anatop->tempsense1);
	reg &= ~TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_MASK;
	reg |= TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ(MEASURE_FREQ);
	writel(reg, &ccm_anatop->tempsense1);

	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_MASK, &ccm_anatop->tempsense1_clr);
	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK, &ccm_anatop->tempsense1_clr);
	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_MASK, &ccm_anatop->tempsense1_set);

	if (soc_rev() >= CHIP_REV_1_1) {
		while ((readl(&ccm_anatop->tempsense1) &
		       TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK) == 0)
			;
		reg = readl(&ccm_anatop->tempsense1);
		tmp = (reg & TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_MASK)
		       >> TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_SHIFT;
	} else {
		/*
		 * Since we can not rely on finish bit, use 10ms
		 * delay to get temperature. From RM, 17us is
		 * enough to get data, but to gurantee to get
		 * the data, delay 10ms here.
		 */
		udelay(10000);
		reg = readl(&ccm_anatop->tempsense1);
		tmp = (reg & TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_MASK)
		       >> TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_SHIFT;
	}

	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK, &ccm_anatop->tempsense1_clr);

	/* power down anatop thermal sensor */
	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_MASK, &ccm_anatop->tempsense1_set);
	writel(PMU_REF_REFTOP_SELFBIASOFF_MASK, &ccm_anatop->ref_clr);

	/* Single point */
	temperature = tmp - (te1 - raw_25c);

	return temperature;
}
#endif

int imx_thermal_get_temp(struct udevice *dev, int *temp)
{
	struct thermal_data *priv = dev_get_priv(dev);
	int cpu_tmp = 0;

	cpu_tmp = read_cpu_temperature(dev);

	while (cpu_tmp >= priv->critical) {
		printf("CPU Temperature (%dC) too close to max (%dC)",
		       cpu_tmp, priv->maxc);
		puts(" waiting...\n");
		udelay(5000000);
		cpu_tmp = read_cpu_temperature(dev);
	}

	*temp = cpu_tmp;

	return 0;
}

static const struct dm_thermal_ops imx_thermal_ops = {
	.get_temp	= imx_thermal_get_temp,
};

static int imx_thermal_probe(struct udevice *dev)
{
	unsigned int fuse = ~0;

	const struct imx_thermal_plat *pdata = dev_get_platdata(dev);
	struct thermal_data *priv = dev_get_priv(dev);

	/* Read Temperature calibration data fuse */
	fuse_read(pdata->fuse_bank, pdata->fuse_word, &fuse);

	if (is_soc_type(MXC_SOC_MX6)) {
		/* Check for valid fuse */
		if (fuse == 0 || fuse == ~0) {
			debug("CPU:   Thermal invalid data, fuse: 0x%x\n",
				fuse);
			return -EPERM;
		}
	} else if (is_soc_type(MXC_SOC_MX7)) {
		/* No Calibration data in FUSE? */
		if ((fuse & 0x3ffff) == 0)
			return -EPERM;
		/* We do not support 105C TE2 */
		if (((fuse & 0x1c0000) >> 18) == 0x6)
			return -EPERM;
	}

	/* set critical cooling temp */
	get_cpu_temp_grade(&priv->minc, &priv->maxc);
	priv->critical = priv->maxc - TEMPERATURE_HOT_DELTA;
	priv->fuse = fuse;

	enable_thermal_clk();

	return 0;
}

U_BOOT_DRIVER(imx_thermal) = {
	.name	= "imx_thermal",
	.id	= UCLASS_THERMAL,
	.ops	= &imx_thermal_ops,
	.probe	= imx_thermal_probe,
	.priv_auto_alloc_size = sizeof(struct thermal_data),
	.flags  = DM_FLAG_PRE_RELOC,
};
Commit	Line	Data
e3568d2e YL	1	/*
	2	* (C) Copyright 2014 Freescale Semiconductor, Inc.
	3	* Author: Nitin Garg <nitin.garg@freescale.com>
	4	* Ye Li <Ye.Li@freescale.com>
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#include <config.h>
	10	#include <common.h>
	11	#include <div64.h>
	12	#include <fuse.h>
	13	#include <asm/io.h>
	14	#include <asm/arch/clock.h>
a91db954	15	#include <asm/arch/sys_proto.h>
e3568d2e YL	16	#include <dm.h>
	17	#include <errno.h>
	18	#include <malloc.h>
	19	#include <thermal.h>
	20	#include <imx_thermal.h>
	21
be56de6f TH	22	/* board will busyloop until this many degrees C below CPU max temperature */
be56de6f TH	23	#define TEMPERATURE_HOT_DELTA 5 /* CPU maxT - 5C */
e3568d2e YL	24	#define FACTOR0 10000000
	25	#define FACTOR1 15976
	26	#define FACTOR2 4297157
	27	#define MEASURE_FREQ 327
d1aa6f2d AA	28	#define TEMPERATURE_MIN -40
	29	#define TEMPERATURE_HOT 85
	30	#define TEMPERATURE_MAX 125
e3568d2e YL	31
	32	#define TEMPSENSE0_TEMP_CNT_SHIFT 8
	33	#define TEMPSENSE0_TEMP_CNT_MASK (0xfff << TEMPSENSE0_TEMP_CNT_SHIFT)
	34	#define TEMPSENSE0_FINISHED (1 << 2)
	35	#define TEMPSENSE0_MEASURE_TEMP (1 << 1)
	36	#define TEMPSENSE0_POWER_DOWN (1 << 0)
	37	#define MISC0_REFTOP_SELBIASOFF (1 << 3)
	38	#define TEMPSENSE1_MEASURE_FREQ 0xffff
	39
a91db954 TH	40	struct thermal_data {
a91db954 TH	41	unsigned int fuse;
be56de6f	42	int critical;
a91db954 TH	43	int minc;
	44	int maxc;
	45	};
	46
d1aa6f2d AA	47	#if defined(CONFIG_MX6)
d1aa6f2d AA	48	static int read_cpu_temperature(struct udevice *dev)
e3568d2e YL	49	{
	50	int temperature;
	51	unsigned int reg, n_meas;
	52	const struct imx_thermal_plat *pdata = dev_get_platdata(dev);
	53	struct anatop_regs anatop = (struct anatop_regs )pdata->regs;
a91db954 TH	54	struct thermal_data *priv = dev_get_priv(dev);
a91db954 TH	55	u32 fuse = priv->fuse;
e3568d2e YL	56	int t1, n1;
	57	u32 c1, c2;
	58	u64 temp64;
	59
	60	/*
	61	* Sensor data layout:
	62	* [31:20] - sensor value @ 25C
	63	* We use universal formula now and only need sensor value @ 25C
	64	* slope = 0.4297157 - (0.0015976 * 25C fuse)
	65	*/
	66	n1 = fuse >> 20;
	67	t1 = 25; /* t1 always 25C */
	68
	69	/*
	70	* Derived from linear interpolation:
	71	* slope = 0.4297157 - (0.0015976 * 25C fuse)
	72	* slope = (FACTOR2 - FACTOR1 * n1) / FACTOR0
	73	* (Nmeas - n1) / (Tmeas - t1) = slope
	74	* We want to reduce this down to the minimum computation necessary
	75	* for each temperature read. Also, we want Tmeas in millicelsius
	76	* and we don't want to lose precision from integer division. So...
	77	* Tmeas = (Nmeas - n1) / slope + t1
	78	* milli_Tmeas = 1000 * (Nmeas - n1) / slope + 1000 * t1
	79	* milli_Tmeas = -1000 * (n1 - Nmeas) / slope + 1000 * t1
	80	* Let constant c1 = (-1000 / slope)
	81	* milli_Tmeas = (n1 - Nmeas) * c1 + 1000 * t1
	82	* Let constant c2 = n1 c1 + 1000 t1
	83	* milli_Tmeas = c2 - Nmeas * c1
	84	*/
	85	temp64 = FACTOR0;
	86	temp64 *= 1000;
	87	do_div(temp64, FACTOR1 * n1 - FACTOR2);
	88	c1 = temp64;
	89	c2 = n1 * c1 + 1000 * t1;
	90
	91	/*
	92	* now we only use single measure, every time we read
	93	* the temperature, we will power on/down anadig thermal
	94	* module
	95	*/
	96	writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_clr);
	97	writel(MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
	98
	99	/* setup measure freq */
	100	reg = readl(&anatop->tempsense1);
	101	reg &= ~TEMPSENSE1_MEASURE_FREQ;
	102	reg \|= MEASURE_FREQ;
	103	writel(reg, &anatop->tempsense1);
	104
	105	/* start the measurement process */
	106	writel(TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_clr);
	107	writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
	108	writel(TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_set);
	109
	110	/* make sure that the latest temp is valid */
	111	while ((readl(&anatop->tempsense0) &
	112	TEMPSENSE0_FINISHED) == 0)
	113	udelay(10000);
	114
	115	/* read temperature count */
	116	reg = readl(&anatop->tempsense0);
	117	n_meas = (reg & TEMPSENSE0_TEMP_CNT_MASK)
	118	>> TEMPSENSE0_TEMP_CNT_SHIFT;
	119	writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
120
121	/* milli_Tmeas = c2 - Nmeas * c1 */
42564025	122	temperature = (long)(c2 - n_meas * c1)/1000;
e3568d2e YL	123
	124	/* power down anatop thermal sensor */
	125	writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_set);
	126	writel(MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_clr);
	127
	128	return temperature;
	129	}
d1aa6f2d AA	130	#elif defined(CONFIG_MX7)
	131	static int read_cpu_temperature(struct udevice *dev)
	132	{
fcbe8c56	133	unsigned int reg, tmp;
d1aa6f2d AA	134	unsigned int raw_25c, te1;
	135	int temperature;
	136	unsigned int *priv = dev_get_priv(dev);
	137	u32 fuse = *priv;
	138	struct mxc_ccm_anatop_reg ccm_anatop = (struct mxc_ccm_anatop_reg )
	139	ANATOP_BASE_ADDR;
	140	/*
	141	* fuse data layout:
	142	* [31:21] sensor value @ 25C
	143	* [20:18] hot temperature value
	144	* [17:9] sensor value of room
	145	* [8:0] sensor value of hot
	146	*/
	147
	148	raw_25c = fuse >> 21;
	149	if (raw_25c == 0)
	150	raw_25c = 25;
	151
	152	te1 = (fuse >> 9) & 0x1ff;
	153
	154	/*
	155	* now we only use single measure, every time we read
	156	* the temperature, we will power on/down anadig thermal
	157	* module
	158	*/
	159	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_MASK, &ccm_anatop->tempsense1_clr);
	160	writel(PMU_REF_REFTOP_SELFBIASOFF_MASK, &ccm_anatop->ref_set);
	161
	162	/* write measure freq */
	163	reg = readl(&ccm_anatop->tempsense1);
	164	reg &= ~TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_MASK;
	165	reg \|= TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ(MEASURE_FREQ);
	166	writel(reg, &ccm_anatop->tempsense1);
	167
	168	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_MASK, &ccm_anatop->tempsense1_clr);
	169	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK, &ccm_anatop->tempsense1_clr);
	170	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_MASK, &ccm_anatop->tempsense1_set);
	171
fcbe8c56 PF	172	if (soc_rev() >= CHIP_REV_1_1) {
	173	while ((readl(&ccm_anatop->tempsense1) &
	174	TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK) == 0)
	175	;
	176	reg = readl(&ccm_anatop->tempsense1);
	177	tmp = (reg & TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_MASK)
	178	>> TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_SHIFT;
	179	} else {
d1aa6f2d	180	/*
fcbe8c56 PF	181	* Since we can not rely on finish bit, use 10ms
	182	* delay to get temperature. From RM, 17us is
	183	* enough to get data, but to gurantee to get
	184	* the data, delay 10ms here.
d1aa6f2d	185	*/
fcbe8c56	186	udelay(10000);
d1aa6f2d AA	187	reg = readl(&ccm_anatop->tempsense1);
	188	tmp = (reg & TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_MASK)
	189	>> TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_SHIFT;
fcbe8c56	190	}
d1aa6f2d AA	191
	192	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK, &ccm_anatop->tempsense1_clr);
	193
	194	/* power down anatop thermal sensor */
	195	writel(TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_MASK, &ccm_anatop->tempsense1_set);
	196	writel(PMU_REF_REFTOP_SELFBIASOFF_MASK, &ccm_anatop->ref_clr);
	197
	198	/* Single point */
	199	temperature = tmp - (te1 - raw_25c);
	200
	201	return temperature;
	202	}
	203	#endif
e3568d2e YL	204
	205	int imx_thermal_get_temp(struct udevice dev, int temp)
	206	{
a91db954	207	struct thermal_data *priv = dev_get_priv(dev);
e3568d2e YL	208	int cpu_tmp = 0;
e3568d2e YL	209
d1aa6f2d AA	210	cpu_tmp = read_cpu_temperature(dev);
d1aa6f2d AA	211
3b7ad216 TH	212	while (cpu_tmp >= priv->critical) {
	213	printf("CPU Temperature (%dC) too close to max (%dC)",
	214	cpu_tmp, priv->maxc);
	215	puts(" waiting...\n");
	216	udelay(5000000);
d1aa6f2d	217	cpu_tmp = read_cpu_temperature(dev);
e3568d2e YL	218	}
	219
	220	*temp = cpu_tmp;
	221
	222	return 0;
	223	}
	224
	225	static const struct dm_thermal_ops imx_thermal_ops = {
	226	.get_temp = imx_thermal_get_temp,
	227	};
	228
	229	static int imx_thermal_probe(struct udevice *dev)
	230	{
	231	unsigned int fuse = ~0;
	232
	233	const struct imx_thermal_plat *pdata = dev_get_platdata(dev);
a91db954	234	struct thermal_data *priv = dev_get_priv(dev);
e3568d2e YL	235
	236	/* Read Temperature calibration data fuse */
	237	fuse_read(pdata->fuse_bank, pdata->fuse_word, &fuse);
	238
1368f993 AA	239	if (is_soc_type(MXC_SOC_MX6)) {
	240	/* Check for valid fuse */
	241	if (fuse == 0 \|\| fuse == ~0) {
c8434cca	242	debug("CPU: Thermal invalid data, fuse: 0x%x\n",
d1aa6f2d	243	fuse);
1368f993 AA	244	return -EPERM;
1368f993 AA	245	}
d1aa6f2d AA	246	} else if (is_soc_type(MXC_SOC_MX7)) {
	247	/* No Calibration data in FUSE? */
	248	if ((fuse & 0x3ffff) == 0)
	249	return -EPERM;
	250	/* We do not support 105C TE2 */
	251	if (((fuse & 0x1c0000) >> 18) == 0x6)
	252	return -EPERM;
e3568d2e YL	253	}
e3568d2e YL	254
be56de6f	255	/* set critical cooling temp */
a91db954	256	get_cpu_temp_grade(&priv->minc, &priv->maxc);
be56de6f	257	priv->critical = priv->maxc - TEMPERATURE_HOT_DELTA;
a91db954	258	priv->fuse = fuse;
e3568d2e YL	259
	260	enable_thermal_clk();
	261
	262	return 0;
	263	}
	264
	265	U_BOOT_DRIVER(imx_thermal) = {
	266	.name = "imx_thermal",
	267	.id = UCLASS_THERMAL,
	268	.ops = &imx_thermal_ops,
	269	.probe = imx_thermal_probe,
a91db954	270	.priv_auto_alloc_size = sizeof(struct thermal_data),
e3568d2e YL	271	.flags = DM_FLAG_PRE_RELOC,
e3568d2e YL	272	};