[people/ms/u-boot.git] / drivers / video / sed156x.c

/*
 * (C) Copyright 2003
 *
 * Pantelis Antoniou <panto@intracom.gr>
 * Intracom S.A.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <watchdog.h>

#include <sed156x.h>

/* configure according to the selected display */
#if defined(CONFIG_SED156X_PG12864Q)
#define LCD_WIDTH	128
#define LCD_HEIGHT	64
#define LCD_LINES	64
#define LCD_PAGES	9
#define LCD_COLUMNS	132
#else
#error Unsupported SED156x configuration
#endif

/* include the font data */
#include <video_font.h>

#if VIDEO_FONT_WIDTH != 8 || VIDEO_FONT_HEIGHT != 16
#error Expecting VIDEO_FONT_WIDTH == 8 && VIDEO_FONT_HEIGHT == 16
#endif

#define LCD_BYTE_WIDTH		(LCD_WIDTH / 8)
#define VIDEO_FONT_BYTE_WIDTH	(VIDEO_FONT_WIDTH / 8)

#define LCD_TEXT_WIDTH	(LCD_WIDTH / VIDEO_FONT_WIDTH)
#define LCD_TEXT_HEIGHT (LCD_HEIGHT / VIDEO_FONT_HEIGHT)

#define LCD_BYTE_LINESZ		(LCD_BYTE_WIDTH * VIDEO_FONT_HEIGHT)

const int sed156x_text_width = LCD_TEXT_WIDTH;
const int sed156x_text_height = LCD_TEXT_HEIGHT;

/**************************************************************************************/

#define SED156X_SPI_RXD() (SED156X_SPI_RXD_PORT & SED156X_SPI_RXD_MASK)

#define SED156X_SPI_TXD(x) \
	do { \
		if (x) \
			SED156X_SPI_TXD_PORT |=	 SED156X_SPI_TXD_MASK; \
		else \
			SED156X_SPI_TXD_PORT &= ~SED156X_SPI_TXD_MASK; \
	} while(0)

#define SED156X_SPI_CLK(x) \
	do { \
		if (x) \
			SED156X_SPI_CLK_PORT |=	 SED156X_SPI_CLK_MASK; \
		else \
			SED156X_SPI_CLK_PORT &= ~SED156X_SPI_CLK_MASK; \
	} while(0)

#define SED156X_SPI_CLK_TOGGLE() (SED156X_SPI_CLK_PORT ^= SED156X_SPI_CLK_MASK)

#define SED156X_SPI_BIT_DELAY() /* no delay */

#define SED156X_CS(x) \
	do { \
		if (x) \
			SED156X_CS_PORT |=  SED156X_CS_MASK; \
		else \
			SED156X_CS_PORT &= ~SED156X_CS_MASK; \
	} while(0)

#define SED156X_A0(x) \
	do { \
		if (x) \
			SED156X_A0_PORT |=  SED156X_A0_MASK; \
		else \
			SED156X_A0_PORT &= ~SED156X_A0_MASK; \
	} while(0)

/**************************************************************************************/

/*** LCD Commands ***/

#define LCD_ON		0xAF	/* Display ON					      */
#define LCD_OFF		0xAE	/* Display OFF					      */
#define LCD_LADDR	0x40	/* Display start line set + (6-bit) address	      */
#define LCD_PADDR	0xB0	/* Page address set + (4-bit) page		      */
#define LCD_CADRH	0x10	/* Column address set upper + (4-bit) column hi	      */
#define LCD_CADRL	0x00	/* Column address set lower + (4-bit) column lo	      */
#define LCD_ADC_NRM	0xA0	/* ADC select Normal				      */
#define LCD_ADC_REV	0xA1	/* ADC select Reverse				      */
#define LCD_DSP_NRM	0xA6	/* LCD display Normal				      */
#define LCD_DSP_REV	0xA7	/* LCD display Reverse				      */
#define LCD_DPT_NRM	0xA4	/* Display all points Normal			      */
#define LCD_DPT_ALL	0xA5	/* Display all points ON			      */
#define LCD_BIAS9	0xA2	/* LCD bias set 1/9				      */
#define LCD_BIAS7	0xA3	/* LCD bias set 1/7				      */
#define LCD_CAINC	0xE0	/* Read/modify/write				      */
#define LCD_CAEND	0xEE	/* End						      */
#define LCD_RESET	0xE2	/* Reset					      */
#define LCD_C_NRM	0xC0	/* Common output mode select Normal direction	      */
#define LCD_C_RVS	0xC8	/* Common output mode select Reverse direction	      */
#define LCD_PWRMD	0x28	/* Power control set + (3-bit) mode		      */
#define LCD_RESRT	0x20	/* V5 v. reg. int. resistor ratio set + (3-bit) ratio */
#define LCD_EVSET	0x81	/* Electronic volume mode set + byte = (6-bit) volume */
#define LCD_SIOFF	0xAC	/* Static indicator OFF				      */
#define LCD_SION	0xAD	/* Static indicator ON + byte = (2-bit) mode	      */
#define LCD_NOP		0xE3	/* NOP						      */
#define LCD_TEST	0xF0	/* Test/Test mode reset (Note: *DO NOT USE*)	      */

/*-------------------------------------------------------------------------------
  Compound commands
  -------------------------------------------------------------------------------
  Command	Description			Commands
  ----------	------------------------	-------------------------------------
  POWS_ON	POWER SAVER ON command		LCD_OFF, LCD_D_ALL
  POWS_OFF	POWER SAVER OFF command		LCD_D_NRM
  SLEEPON	SLEEP mode			LCD_SIOFF, POWS_ON
  SLEEPOFF	SLEEP mode cancel		LCD_D_NRM, LCD_SION, LCD_SIS_???
  STDBYON	STAND BY mode			LCD_SION, POWS_ON
  STDBYOFF	STAND BY mode cancel		LCD_D_NRM
  -------------------------------------------------------------------------------*/

/*** LCD various parameters ***/
#define LCD_PPB		8	/* Pixels per byte (display is B/W, 1 bit per pixel) */

/*** LCD Status byte masks ***/
#define LCD_S_BUSY	0x80	/* Status Read - BUSY mask   */
#define LCD_S_ADC	0x40	/* Status Read - ADC mask    */
#define LCD_S_ONOFF	0x20	/* Status Read - ON/OFF mask */
#define LCD_S_RESET	0x10	/* Status Read - RESET mask  */

/*** LCD commands parameter masks ***/
#define LCD_M_LADDR	0x3F	/* Display start line (6-bit) address mask	     */
#define LCD_M_PADDR	0x0F	/* Page address (4-bit) page mask		     */
#define LCD_M_CADRH	0x0F	/* Column address upper (4-bit) column hi mask	     */
#define LCD_M_CADRL	0x0F	/* Column address lower (4-bit) column lo mask	     */
#define LCD_M_PWRMD	0x07	/* Power control (3-bit) mode mask		     */
#define LCD_M_RESRT	0x07	/* V5 v. reg. int. resistor ratio (3-bit) ratio mask */
#define LCD_M_EVSET	0x3F	/* Electronic volume mode byte (6-bit) volume mask   */
#define LCD_M_SION	0x03	/* Static indicator ON (2-bit) mode mask	     */

/*** LCD Power control cirquits control masks ***/
#define LCD_PWRBSTR	0x04	/* Power control mode - Booster cirquit ON	     */
#define LCD_PWRVREG	0x02	/* Power control mode - Voltage regulator cirquit ON */
#define LCD_PWRVFOL	0x01	/* Power control mode - Voltage follower cirquit ON  */

/*** LCD Static indicator states ***/
#define LCD_SIS_OFF	0x00	/* Static indicator register set - OFF state		 */
#define LCD_SIS_BL	0x01	/* Static indicator register set - 1s blink state	 */
#define LCD_SIS_RBL	0x02	/* Static indicator register set - .5s rapid blink state */
#define LCD_SIS_ON	0x03	/* Static indicator register set - constantly on state	 */

/*** LCD functions special parameters (commands) ***/
#define LCD_PREVP	0x80	/* Page number for moving to previous */
#define LCD_NEXTP	0x81	/* or next page */
#define LCD_ERR_P	0xFF	/* Error in page number */

/*** LCD initialization settings ***/
#define LCD_BIAS	LCD_BIAS9	/* Bias: 1/9		      */
#define LCD_ADCMODE	LCD_ADC_NRM	/* ADC mode: normal	      */
#define LCD_COMDIR	LCD_C_NRM	/* Common output mode: normal */
#define LCD_RRATIO	0		/* Resistor ratio: 0	      */
#define LCD_CNTRST	0x1C		/* electronic volume: 1Ch     */
#define LCD_POWERM	(LCD_PWRBSTR | LCD_PWRVREG | LCD_PWRVFOL)	/* Power mode: All on */

/**************************************************************************************/

static inline unsigned int sed156x_transfer(unsigned int val)
{
	unsigned int rx;
	int b;

	rx = 0; b = 8;
	while (--b >= 0) {
		SED156X_SPI_TXD(val & 0x80);
		val <<= 1;
		SED156X_SPI_CLK_TOGGLE();
		SED156X_SPI_BIT_DELAY();
		rx <<= 1;
		if (SED156X_SPI_RXD())
			rx |= 1;
		SED156X_SPI_CLK_TOGGLE();
		SED156X_SPI_BIT_DELAY();
	}

	return rx;
}

unsigned int sed156x_data_transfer(unsigned int val)
{
	unsigned int rx;

	SED156X_SPI_CLK(1);
	SED156X_CS(0);
	SED156X_A0(1);

	rx = sed156x_transfer(val);

	SED156X_CS(1);

	return rx;
}

void sed156x_data_block_transfer(const u8 *p, int size)
{
	SED156X_SPI_CLK(1);
	SED156X_CS(0);
	SED156X_A0(1);

	while (--size >= 0)
		sed156x_transfer(*p++);

	SED156X_CS(1);
}

unsigned int sed156x_cmd_transfer(unsigned int val)
{
	unsigned int rx;

	SED156X_SPI_CLK(1);
	SED156X_CS(0);
	SED156X_A0(0);

	rx = sed156x_transfer(val);

	SED156X_CS(1);
	SED156X_A0(1);

	return rx;
}

/******************************************************************************/

static u8 hw_screen[LCD_PAGES][LCD_COLUMNS];
static u8 last_hw_screen[LCD_PAGES][LCD_COLUMNS];
static u8 sw_screen[LCD_BYTE_WIDTH * LCD_HEIGHT];

void sed156x_sync(void)
{
	int i, j, last_page;
	u8 *d;
	const u8 *s, *e, *b, *r;
	u8 v0, v1, v2, v3, v4, v5, v6, v7;

	/* copy and rotate sw_screen to hw_screen */
	for (i = 0; i < LCD_HEIGHT / 8; i++) {

		d = &hw_screen[i][0];
		s = &sw_screen[LCD_BYTE_WIDTH * 8 * i + LCD_BYTE_WIDTH - 1];

		for (j = 0; j < LCD_WIDTH / 8; j++) {

			v0 = s[0 * LCD_BYTE_WIDTH];
			v1 = s[1 * LCD_BYTE_WIDTH];
			v2 = s[2 * LCD_BYTE_WIDTH];
			v3 = s[3 * LCD_BYTE_WIDTH];
			v4 = s[4 * LCD_BYTE_WIDTH];
			v5 = s[5 * LCD_BYTE_WIDTH];
			v6 = s[6 * LCD_BYTE_WIDTH];
			v7 = s[7 * LCD_BYTE_WIDTH];

			d[0] =	((v7 & 0x01) << 7) |
				((v6 & 0x01) << 6) |
				((v5 & 0x01) << 5) |
				((v4 & 0x01) << 4) |
				((v3 & 0x01) << 3) |
				((v2 & 0x01) << 2) |
				((v1 & 0x01) << 1) |
				 (v0 & 0x01)	   ;

			d[1] =	((v7 & 0x02) << 6) |
				((v6 & 0x02) << 5) |
				((v5 & 0x02) << 4) |
				((v4 & 0x02) << 3) |
				((v3 & 0x02) << 2) |
				((v2 & 0x02) << 1) |
				((v1 & 0x02) << 0) |
				((v0 & 0x02) >> 1) ;

			d[2] =	((v7 & 0x04) << 5) |
				((v6 & 0x04) << 4) |
				((v5 & 0x04) << 3) |
				((v4 & 0x04) << 2) |
				((v3 & 0x04) << 1) |
				 (v2 & 0x04)	   |
				((v1 & 0x04) >> 1) |
				((v0 & 0x04) >> 2) ;

			d[3] =	((v7 & 0x08) << 4) |
				((v6 & 0x08) << 3) |
				((v5 & 0x08) << 2) |
				((v4 & 0x08) << 1) |
				 (v3 & 0x08)	   |
				((v2 & 0x08) >> 1) |
				((v1 & 0x08) >> 2) |
				((v0 & 0x08) >> 3) ;

			d[4] =	((v7 & 0x10) << 3) |
				((v6 & 0x10) << 2) |
				((v5 & 0x10) << 1) |
				 (v4 & 0x10)	   |
				((v3 & 0x10) >> 1) |
				((v2 & 0x10) >> 2) |
				((v1 & 0x10) >> 3) |
				((v0 & 0x10) >> 4) ;

			d[5] =	((v7 & 0x20) << 2) |
				((v6 & 0x20) << 1) |
				 (v5 & 0x20)	   |
				((v4 & 0x20) >> 1) |
				((v3 & 0x20) >> 2) |
				((v2 & 0x20) >> 3) |
				((v1 & 0x20) >> 4) |
				((v0 & 0x20) >> 5) ;

			d[6] =	((v7 & 0x40) << 1) |
				 (v6 & 0x40)	   |
				((v5 & 0x40) >> 1) |
				((v4 & 0x40) >> 2) |
				((v3 & 0x40) >> 3) |
				((v2 & 0x40) >> 4) |
				((v1 & 0x40) >> 5) |
				((v0 & 0x40) >> 6) ;

			d[7] =	 (v7 & 0x80)	   |
				((v6 & 0x80) >> 1) |
				((v5 & 0x80) >> 2) |
				((v4 & 0x80) >> 3) |
				((v3 & 0x80) >> 4) |
				((v2 & 0x80) >> 5) |
				((v1 & 0x80) >> 6) |
				((v0 & 0x80) >> 7) ;

			d += 8;
			s--;
		}
	}

	/* and now output only the differences */
	for (i = 0; i < LCD_PAGES; i++) {

		b = &hw_screen[i][0];
		e = &hw_screen[i][LCD_COLUMNS];

		d = &last_hw_screen[i][0];
		s = b;

		last_page = -1;

		/* update only the differences */
		do {
			while (s < e && *s == *d) {
				s++;
				d++;
			}
			if (s == e)
				break;
			r = s;
			while (s < e && *s != *d)
				*d++ = *s++;

			j = r - b;

			if (i != last_page) {
				sed156x_cmd_transfer(LCD_PADDR | i);
				last_page = i;
			}

			sed156x_cmd_transfer(LCD_CADRH | ((j >> 4) & 0x0F));
			sed156x_cmd_transfer(LCD_CADRL | (j & 0x0F));
			sed156x_data_block_transfer(r, s - r);

		} while (s < e);
	}

/********
	for (i = 0; i < LCD_PAGES; i++) {
		sed156x_cmd_transfer(LCD_PADDR | i);
		sed156x_cmd_transfer(LCD_CADRH | 0);
		sed156x_cmd_transfer(LCD_CADRL | 0);
		sed156x_data_block_transfer(&hw_screen[i][0], LCD_COLUMNS);
	}
	memcpy(last_hw_screen, hw_screen, sizeof(last_hw_screen));
********/
}

void sed156x_clear(void)
{
	memset(sw_screen, 0, sizeof(sw_screen));
}

void sed156x_output_at(int x, int y, const char *str, int size)
{
	int i, j;
	u8 *p;
	const u8 *s;

	if ((unsigned int)y >= LCD_TEXT_HEIGHT || (unsigned int)x >= LCD_TEXT_WIDTH)
		return;

	p = &sw_screen[y * VIDEO_FONT_HEIGHT * LCD_BYTE_WIDTH + x * VIDEO_FONT_BYTE_WIDTH];

	while (--size >= 0) {

		s = &video_fontdata[((int)*str++ & 0xff) * VIDEO_FONT_BYTE_WIDTH * VIDEO_FONT_HEIGHT];
		for (i = 0; i < VIDEO_FONT_HEIGHT; i++) {
			for (j = 0; j < VIDEO_FONT_BYTE_WIDTH; j++)
				*p++ = *s++;
			p += LCD_BYTE_WIDTH - VIDEO_FONT_BYTE_WIDTH;
		}
		p -= (LCD_BYTE_LINESZ - VIDEO_FONT_BYTE_WIDTH);

		if (x >= LCD_TEXT_WIDTH)
			break;
		x++;
	}
}

void sed156x_reverse_at(int x, int y, int size)
{
	int i, j;
	u8 *p;

	if ((unsigned int)y >= LCD_TEXT_HEIGHT || (unsigned int)x >= LCD_TEXT_WIDTH)
		return;

	p = &sw_screen[y * VIDEO_FONT_HEIGHT * LCD_BYTE_WIDTH + x * VIDEO_FONT_BYTE_WIDTH];

	while (--size >= 0) {

		for (i = 0; i < VIDEO_FONT_HEIGHT; i++) {
			for (j = 0; j < VIDEO_FONT_BYTE_WIDTH; j++, p++)
				*p = ~*p;
			p += LCD_BYTE_WIDTH - VIDEO_FONT_BYTE_WIDTH;
		}
		p -= (LCD_BYTE_LINESZ - VIDEO_FONT_BYTE_WIDTH);

		if (x >= LCD_TEXT_WIDTH)
			break;
		x++;
	}
}

void sed156x_scroll_line(void)
{
	memmove(&sw_screen[0],
			&sw_screen[LCD_BYTE_LINESZ],
			LCD_BYTE_WIDTH * (LCD_HEIGHT - VIDEO_FONT_HEIGHT));
}

void sed156x_scroll(int dx, int dy)
{
	u8 *p1 = NULL, *p2 = NULL, *p3 = NULL;	/* pacify gcc */
	int adx, ady, i, sz;

	adx = dx > 0 ? dx : -dx;
	ady = dy > 0 ? dy : -dy;

	/* overscroll? erase everything */
	if (adx >= LCD_TEXT_WIDTH || ady >= LCD_TEXT_HEIGHT) {
		memset(sw_screen, 0, sizeof(sw_screen));
		return;
	}

	sz = LCD_BYTE_LINESZ * ady;
	if (dy > 0) {
		p1 = &sw_screen[0];
		p2 = &sw_screen[sz];
		p3 = &sw_screen[LCD_BYTE_WIDTH * LCD_HEIGHT - sz];
	} else if (dy < 0) {
		p1 = &sw_screen[sz];
		p2 = &sw_screen[0];
		p3 = &sw_screen[0];
	}

	if (ady > 0) {
		memmove(p1, p2, LCD_BYTE_WIDTH * LCD_HEIGHT - sz);
		memset(p3, 0, sz);
	}

	sz = VIDEO_FONT_BYTE_WIDTH * adx;
	if (dx > 0) {
		p1 = &sw_screen[0];
		p2 = &sw_screen[0] + sz;
		p3 = &sw_screen[0] + LCD_BYTE_WIDTH - sz;
	} else if (dx < 0) {
		p1 = &sw_screen[0] + sz;
		p2 = &sw_screen[0];
		p3 = &sw_screen[0];
	}

	/* xscroll */
	if (adx > 0) {
		for (i = 0; i < LCD_HEIGHT; i++) {
			memmove(p1, p2, LCD_BYTE_WIDTH - sz);
			memset(p3, 0, sz);
			p1 += LCD_BYTE_WIDTH;
			p2 += LCD_BYTE_WIDTH;
			p3 += LCD_BYTE_WIDTH;
		}
	}
}

void sed156x_init(void)
{
	int i;

	SED156X_CS(1);
	SED156X_A0(1);

	/* Send initialization commands to the LCD */
	sed156x_cmd_transfer(LCD_OFF);			/* Turn display OFF	  */
	sed156x_cmd_transfer(LCD_BIAS);			/* set the LCD Bias,	  */
	sed156x_cmd_transfer(LCD_ADCMODE);		/* ADC mode,		  */
	sed156x_cmd_transfer(LCD_COMDIR);		/* common output mode,	  */
	sed156x_cmd_transfer(LCD_RESRT | LCD_RRATIO);	/* resistor ratio,	  */
	sed156x_cmd_transfer(LCD_EVSET);		/* electronic volume,	  */
	sed156x_cmd_transfer(LCD_CNTRST);
	sed156x_cmd_transfer(LCD_PWRMD | LCD_POWERM);	/* and power mode	  */
	sed156x_cmd_transfer(LCD_PADDR | 0);		/* cursor home		  */
	sed156x_cmd_transfer(LCD_CADRH | 0);
	sed156x_cmd_transfer(LCD_CADRL | 0);
	sed156x_cmd_transfer(LCD_LADDR | 0);		/* and display start line */
	sed156x_cmd_transfer(LCD_DSP_NRM);		/* LCD display Normal	  */

	/* clear everything */
	memset(sw_screen, 0, sizeof(sw_screen));
	memset(hw_screen, 0, sizeof(hw_screen));
	memset(last_hw_screen, 0, sizeof(last_hw_screen));

	for (i = 0; i < LCD_PAGES; i++) {
		sed156x_cmd_transfer(LCD_PADDR | i);
		sed156x_cmd_transfer(LCD_CADRH | 0);
		sed156x_cmd_transfer(LCD_CADRL | 0);
		sed156x_data_block_transfer(&hw_screen[i][0], LCD_COLUMNS);
	}

	sed156x_clear();
	sed156x_sync();
	sed156x_cmd_transfer(LCD_ON);			/* Turn display ON	  */
}
Commit	Line	Data
5a8c51cd WD	1	/*
	2	* (C) Copyright 2003
	3	*
	4	* Pantelis Antoniou <panto@intracom.gr>
	5	* Intracom S.A.
	6	*
3765b3e7	7	* SPDX-License-Identifier: GPL-2.0+
5a8c51cd WD	8	*/
	9
	10	#include <common.h>
	11	#include <watchdog.h>
	12
	13	#include <sed156x.h>
	14
5a8c51cd WD	15	/* configure according to the selected display */
	16	#if defined(CONFIG_SED156X_PG12864Q)
	17	#define LCD_WIDTH 128
	18	#define LCD_HEIGHT 64
	19	#define LCD_LINES 64
	20	#define LCD_PAGES 9
	21	#define LCD_COLUMNS 132
	22	#else
	23	#error Unsupported SED156x configuration
	24	#endif
	25
	26	/* include the font data */
	27	#include <video_font.h>
	28
	29	#if VIDEO_FONT_WIDTH != 8 \|\| VIDEO_FONT_HEIGHT != 16
	30	#error Expecting VIDEO_FONT_WIDTH == 8 && VIDEO_FONT_HEIGHT == 16
	31	#endif
	32
	33	#define LCD_BYTE_WIDTH (LCD_WIDTH / 8)
	34	#define VIDEO_FONT_BYTE_WIDTH (VIDEO_FONT_WIDTH / 8)
	35
	36	#define LCD_TEXT_WIDTH (LCD_WIDTH / VIDEO_FONT_WIDTH)
	37	#define LCD_TEXT_HEIGHT (LCD_HEIGHT / VIDEO_FONT_HEIGHT)
	38
	39	#define LCD_BYTE_LINESZ (LCD_BYTE_WIDTH * VIDEO_FONT_HEIGHT)
	40
	41	const int sed156x_text_width = LCD_TEXT_WIDTH;
	42	const int sed156x_text_height = LCD_TEXT_HEIGHT;
	43
	44	/**************************************************************************************/
	45
	46	#define SED156X_SPI_RXD() (SED156X_SPI_RXD_PORT & SED156X_SPI_RXD_MASK)
	47
	48	#define SED156X_SPI_TXD(x) \
	49	do { \
	50	if (x) \
	51	SED156X_SPI_TXD_PORT \|= SED156X_SPI_TXD_MASK; \
	52	else \
	53	SED156X_SPI_TXD_PORT &= ~SED156X_SPI_TXD_MASK; \
	54	} while(0)
	55
	56	#define SED156X_SPI_CLK(x) \
	57	do { \
	58	if (x) \
	59	SED156X_SPI_CLK_PORT \|= SED156X_SPI_CLK_MASK; \
	60	else \
	61	SED156X_SPI_CLK_PORT &= ~SED156X_SPI_CLK_MASK; \
	62	} while(0)
	63
	64	#define SED156X_SPI_CLK_TOGGLE() (SED156X_SPI_CLK_PORT ^= SED156X_SPI_CLK_MASK)
	65
	66	#define SED156X_SPI_BIT_DELAY() /* no delay */
	67
	68	#define SED156X_CS(x) \
	69	do { \
	70	if (x) \
	71	SED156X_CS_PORT \|= SED156X_CS_MASK; \
	72	else \
	73	SED156X_CS_PORT &= ~SED156X_CS_MASK; \
	74	} while(0)
	75
	76	#define SED156X_A0(x) \
	77	do { \
	78	if (x) \
79	SED156X_A0_PORT \|= SED156X_A0_MASK; \
80	else \
81	SED156X_A0_PORT &= ~SED156X_A0_MASK; \
82	} while(0)
83
84	/**************************************************************************************/
85
86	/* LCD Commands */
87
88	#define LCD_ON 0xAF /* Display ON */
89	#define LCD_OFF 0xAE /* Display OFF */
90	#define LCD_LADDR 0x40 /* Display start line set + (6-bit) address */
91	#define LCD_PADDR 0xB0 /* Page address set + (4-bit) page */
92	#define LCD_CADRH 0x10 /* Column address set upper + (4-bit) column hi */
93	#define LCD_CADRL 0x00 /* Column address set lower + (4-bit) column lo */
94	#define LCD_ADC_NRM 0xA0 /* ADC select Normal */
95	#define LCD_ADC_REV 0xA1 /* ADC select Reverse */
96	#define LCD_DSP_NRM 0xA6 /* LCD display Normal */
97	#define LCD_DSP_REV 0xA7 /* LCD display Reverse */
98	#define LCD_DPT_NRM 0xA4 /* Display all points Normal */
99	#define LCD_DPT_ALL 0xA5 /* Display all points ON */
100	#define LCD_BIAS9 0xA2 /* LCD bias set 1/9 */
101	#define LCD_BIAS7 0xA3 /* LCD bias set 1/7 */
102	#define LCD_CAINC 0xE0 /* Read/modify/write */
103	#define LCD_CAEND 0xEE /* End */
104	#define LCD_RESET 0xE2 /* Reset */
105	#define LCD_C_NRM 0xC0 /* Common output mode select Normal direction */
106	#define LCD_C_RVS 0xC8 /* Common output mode select Reverse direction */
107	#define LCD_PWRMD 0x28 /* Power control set + (3-bit) mode */
108	#define LCD_RESRT 0x20 /* V5 v. reg. int. resistor ratio set + (3-bit) ratio */
109	#define LCD_EVSET 0x81 /* Electronic volume mode set + byte = (6-bit) volume */
110	#define LCD_SIOFF 0xAC /* Static indicator OFF */
111	#define LCD_SION 0xAD /* Static indicator ON + byte = (2-bit) mode */
112	#define LCD_NOP 0xE3 /* NOP */
113	#define LCD_TEST 0xF0 /* Test/Test mode reset (Note: DO NOT USE) */
114
115	/*-------------------------------------------------------------------------------
116	Compound commands
117	-------------------------------------------------------------------------------
118	Command Description Commands
119	---------- ------------------------ -------------------------------------
120	POWS_ON POWER SAVER ON command LCD_OFF, LCD_D_ALL
121	POWS_OFF POWER SAVER OFF command LCD_D_NRM
122	SLEEPON SLEEP mode LCD_SIOFF, POWS_ON
123	SLEEPOFF SLEEP mode cancel LCD_D_NRM, LCD_SION, LCD_SIS_???
124	STDBYON STAND BY mode LCD_SION, POWS_ON
125	STDBYOFF STAND BY mode cancel LCD_D_NRM
126	-------------------------------------------------------------------------------*/
127
128	/* LCD various parameters */
129	#define LCD_PPB 8 /* Pixels per byte (display is B/W, 1 bit per pixel) */
130
131	/* LCD Status byte masks */
132	#define LCD_S_BUSY 0x80 /* Status Read - BUSY mask */
133	#define LCD_S_ADC 0x40 /* Status Read - ADC mask */
134	#define LCD_S_ONOFF 0x20 /* Status Read - ON/OFF mask */
135	#define LCD_S_RESET 0x10 /* Status Read - RESET mask */
136
137	/* LCD commands parameter masks */
138	#define LCD_M_LADDR 0x3F /* Display start line (6-bit) address mask */
139	#define LCD_M_PADDR 0x0F /* Page address (4-bit) page mask */
140	#define LCD_M_CADRH 0x0F /* Column address upper (4-bit) column hi mask */
141	#define LCD_M_CADRL 0x0F /* Column address lower (4-bit) column lo mask */
142	#define LCD_M_PWRMD 0x07 /* Power control (3-bit) mode mask */
143	#define LCD_M_RESRT 0x07 /* V5 v. reg. int. resistor ratio (3-bit) ratio mask */
144	#define LCD_M_EVSET 0x3F /* Electronic volume mode byte (6-bit) volume mask */
145	#define LCD_M_SION 0x03 /* Static indicator ON (2-bit) mode mask */
146
147	/* LCD Power control cirquits control masks */
148	#define LCD_PWRBSTR 0x04 /* Power control mode - Booster cirquit ON */
149	#define LCD_PWRVREG 0x02 /* Power control mode - Voltage regulator cirquit ON */
150	#define LCD_PWRVFOL 0x01 /* Power control mode - Voltage follower cirquit ON */
151
152	/* LCD Static indicator states */
153	#define LCD_SIS_OFF 0x00 /* Static indicator register set - OFF state */
154	#define LCD_SIS_BL 0x01 /* Static indicator register set - 1s blink state */
155	#define LCD_SIS_RBL 0x02 /* Static indicator register set - .5s rapid blink state */
156	#define LCD_SIS_ON 0x03 /* Static indicator register set - constantly on state */
157
158	/* LCD functions special parameters (commands) */
159	#define LCD_PREVP 0x80 /* Page number for moving to previous */
160	#define LCD_NEXTP 0x81 /* or next page */
161	#define LCD_ERR_P 0xFF /* Error in page number */
162
163	/* LCD initialization settings */
164	#define LCD_BIAS LCD_BIAS9 /* Bias: 1/9 */
165	#define LCD_ADCMODE LCD_ADC_NRM /* ADC mode: normal */
166	#define LCD_COMDIR LCD_C_NRM /* Common output mode: normal */
167	#define LCD_RRATIO 0 /* Resistor ratio: 0 */
168	#define LCD_CNTRST 0x1C /* electronic volume: 1Ch */
169	#define LCD_POWERM (LCD_PWRBSTR \| LCD_PWRVREG \| LCD_PWRVFOL) /* Power mode: All on */
170
171	/**************************************************************************************/
172
173	static inline unsigned int sed156x_transfer(unsigned int val)
174	{
175	unsigned int rx;
176	int b;
177
178	rx = 0; b = 8;
179	while (--b >= 0) {
180	SED156X_SPI_TXD(val & 0x80);
181	val <<= 1;
182	SED156X_SPI_CLK_TOGGLE();
183	SED156X_SPI_BIT_DELAY();
184	rx <<= 1;
185	if (SED156X_SPI_RXD())
186	rx \|= 1;
187	SED156X_SPI_CLK_TOGGLE();
188	SED156X_SPI_BIT_DELAY();
189	}
190
191	return rx;
192	}
193
194	unsigned int sed156x_data_transfer(unsigned int val)
195	{
196	unsigned int rx;
197
198	SED156X_SPI_CLK(1);
199	SED156X_CS(0);
200	SED156X_A0(1);
201
202	rx = sed156x_transfer(val);
203
204	SED156X_CS(1);
205
206	return rx;
207	}
208
209	void sed156x_data_block_transfer(const u8 *p, int size)
210	{
211	SED156X_SPI_CLK(1);
212	SED156X_CS(0);
213	SED156X_A0(1);
214
215	while (--size >= 0)
216	sed156x_transfer(*p++);
217
218	SED156X_CS(1);
219	}
220
221	unsigned int sed156x_cmd_transfer(unsigned int val)
222	{
223	unsigned int rx;
224
225	SED156X_SPI_CLK(1);
226	SED156X_CS(0);
227	SED156X_A0(0);
228
229	rx = sed156x_transfer(val);
230
231	SED156X_CS(1);
232	SED156X_A0(1);
233
234	return rx;
235	}
236
237	/******************************************************************************/
238
239	static u8 hw_screen[LCD_PAGES][LCD_COLUMNS];
240	static u8 last_hw_screen[LCD_PAGES][LCD_COLUMNS];
241	static u8 sw_screen[LCD_BYTE_WIDTH * LCD_HEIGHT];
242
243	void sed156x_sync(void)
244	{
245	int i, j, last_page;
246	u8 *d;
247	const u8 s, e, b, r;
248	u8 v0, v1, v2, v3, v4, v5, v6, v7;
249
250	/* copy and rotate sw_screen to hw_screen */
251	for (i = 0; i < LCD_HEIGHT / 8; i++) {
252
253	d = &hw_screen[i][0];
254	s = &sw_screen[LCD_BYTE_WIDTH * 8 * i + LCD_BYTE_WIDTH - 1];
255
256	for (j = 0; j < LCD_WIDTH / 8; j++) {
257
258	v0 = s[0 * LCD_BYTE_WIDTH];
259	v1 = s[1 * LCD_BYTE_WIDTH];
260	v2 = s[2 * LCD_BYTE_WIDTH];
261	v3 = s[3 * LCD_BYTE_WIDTH];
262	v4 = s[4 * LCD_BYTE_WIDTH];
263	v5 = s[5 * LCD_BYTE_WIDTH];
264	v6 = s[6 * LCD_BYTE_WIDTH];
265	v7 = s[7 * LCD_BYTE_WIDTH];
266
267	d[0] = ((v7 & 0x01) << 7) \|
268	((v6 & 0x01) << 6) \|
269	((v5 & 0x01) << 5) \|
270	((v4 & 0x01) << 4) \|
271	((v3 & 0x01) << 3) \|
272	((v2 & 0x01) << 2) \|
273	((v1 & 0x01) << 1) \|
274	(v0 & 0x01) ;
275
276	d[1] = ((v7 & 0x02) << 6) \|
277	((v6 & 0x02) << 5) \|
278	((v5 & 0x02) << 4) \|
279	((v4 & 0x02) << 3) \|
280	((v3 & 0x02) << 2) \|
281	((v2 & 0x02) << 1) \|
282	((v1 & 0x02) << 0) \|
283	((v0 & 0x02) >> 1) ;
284
285	d[2] = ((v7 & 0x04) << 5) \|
286	((v6 & 0x04) << 4) \|
287	((v5 & 0x04) << 3) \|
288	((v4 & 0x04) << 2) \|
289	((v3 & 0x04) << 1) \|
290	(v2 & 0x04) \|
291	((v1 & 0x04) >> 1) \|
292	((v0 & 0x04) >> 2) ;
293
294	d[3] = ((v7 & 0x08) << 4) \|
295	((v6 & 0x08) << 3) \|
296	((v5 & 0x08) << 2) \|
297	((v4 & 0x08) << 1) \|
298	(v3 & 0x08) \|
299	((v2 & 0x08) >> 1) \|
300	((v1 & 0x08) >> 2) \|
301	((v0 & 0x08) >> 3) ;
302
303	d[4] = ((v7 & 0x10) << 3) \|
304	((v6 & 0x10) << 2) \|
305	((v5 & 0x10) << 1) \|
306	(v4 & 0x10) \|
307	((v3 & 0x10) >> 1) \|
308	((v2 & 0x10) >> 2) \|
309	((v1 & 0x10) >> 3) \|
310	((v0 & 0x10) >> 4) ;
311
312	d[5] = ((v7 & 0x20) << 2) \|
313	((v6 & 0x20) << 1) \|
314	(v5 & 0x20) \|
315	((v4 & 0x20) >> 1) \|
316	((v3 & 0x20) >> 2) \|
317	((v2 & 0x20) >> 3) \|
318	((v1 & 0x20) >> 4) \|
319	((v0 & 0x20) >> 5) ;
320
321	d[6] = ((v7 & 0x40) << 1) \|
322	(v6 & 0x40) \|
323	((v5 & 0x40) >> 1) \|
324	((v4 & 0x40) >> 2) \|
325	((v3 & 0x40) >> 3) \|
326	((v2 & 0x40) >> 4) \|
327	((v1 & 0x40) >> 5) \|
328	((v0 & 0x40) >> 6) ;
329
330	d[7] = (v7 & 0x80) \|
331	((v6 & 0x80) >> 1) \|
332	((v5 & 0x80) >> 2) \|
333	((v4 & 0x80) >> 3) \|
334	((v3 & 0x80) >> 4) \|
335	((v2 & 0x80) >> 5) \|
336	((v1 & 0x80) >> 6) \|
337	((v0 & 0x80) >> 7) ;
338
339	d += 8;
340	s--;
341	}
342	}
343
344	/* and now output only the differences */
345	for (i = 0; i < LCD_PAGES; i++) {
346
347	b = &hw_screen[i][0];
348	e = &hw_screen[i][LCD_COLUMNS];
349
350	d = &last_hw_screen[i][0];
351	s = b;
352
353	last_page = -1;
354
355	/* update only the differences */
356	do {
357	while (s < e && s == d) {
358	s++;
359	d++;
360	}
361	if (s == e)
362	break;
363	r = s;
364	while (s < e && s != d)
365	d++ = s++;
366
367	j = r - b;
368
369	if (i != last_page) {
370	sed156x_cmd_transfer(LCD_PADDR \| i);
371	last_page = i;
372	}
373
374	sed156x_cmd_transfer(LCD_CADRH \| ((j >> 4) & 0x0F));
375	sed156x_cmd_transfer(LCD_CADRL \| (j & 0x0F));
376	sed156x_data_block_transfer(r, s - r);
377
378	} while (s < e);
379	}
380
381	/********
382	for (i = 0; i < LCD_PAGES; i++) {
383	sed156x_cmd_transfer(LCD_PADDR \| i);
384	sed156x_cmd_transfer(LCD_CADRH \| 0);
385	sed156x_cmd_transfer(LCD_CADRL \| 0);
386	sed156x_data_block_transfer(&hw_screen[i][0], LCD_COLUMNS);
387	}
388	memcpy(last_hw_screen, hw_screen, sizeof(last_hw_screen));
389	********/
390	}
391
392	void sed156x_clear(void)
393	{
394	memset(sw_screen, 0, sizeof(sw_screen));
395	}
396
397	void sed156x_output_at(int x, int y, const char *str, int size)
398	{
399	int i, j;
400	u8 *p;
401	const u8 *s;
402
403	if ((unsigned int)y >= LCD_TEXT_HEIGHT \|\| (unsigned int)x >= LCD_TEXT_WIDTH)
404	return;
405
406	p = &sw_screen[y * VIDEO_FONT_HEIGHT * LCD_BYTE_WIDTH + x * VIDEO_FONT_BYTE_WIDTH];
407
408	while (--size >= 0) {
409
410	s = &video_fontdata[((int)str++ & 0xff) VIDEO_FONT_BYTE_WIDTH * VIDEO_FONT_HEIGHT];
411	for (i = 0; i < VIDEO_FONT_HEIGHT; i++) {
412	for (j = 0; j < VIDEO_FONT_BYTE_WIDTH; j++)
413	p++ = s++;
414	p += LCD_BYTE_WIDTH - VIDEO_FONT_BYTE_WIDTH;
415	}
416	p -= (LCD_BYTE_LINESZ - VIDEO_FONT_BYTE_WIDTH);
417
418	if (x >= LCD_TEXT_WIDTH)
419	break;
420	x++;
421	}
422	}
423
424	void sed156x_reverse_at(int x, int y, int size)
425	{
426	int i, j;
427	u8 *p;
428
429	if ((unsigned int)y >= LCD_TEXT_HEIGHT \|\| (unsigned int)x >= LCD_TEXT_WIDTH)
430	return;
431
432	p = &sw_screen[y * VIDEO_FONT_HEIGHT * LCD_BYTE_WIDTH + x * VIDEO_FONT_BYTE_WIDTH];
433
434	while (--size >= 0) {
435
436	for (i = 0; i < VIDEO_FONT_HEIGHT; i++) {
437	for (j = 0; j < VIDEO_FONT_BYTE_WIDTH; j++, p++)
438	p = ~p;
439	p += LCD_BYTE_WIDTH - VIDEO_FONT_BYTE_WIDTH;
440	}
441	p -= (LCD_BYTE_LINESZ - VIDEO_FONT_BYTE_WIDTH);
442
443	if (x >= LCD_TEXT_WIDTH)
444	break;
445	x++;
446	}
447	}
448
449	void sed156x_scroll_line(void)
450	{
451	memmove(&sw_screen[0],
452	&sw_screen[LCD_BYTE_LINESZ],
453	LCD_BYTE_WIDTH * (LCD_HEIGHT - VIDEO_FONT_HEIGHT));
454	}
455
456	void sed156x_scroll(int dx, int dy)
457	{
458	u8 p1 = NULL, p2 = NULL, p3 = NULL; / pacify gcc */
459	int adx, ady, i, sz;
460
461	adx = dx > 0 ? dx : -dx;
462	ady = dy > 0 ? dy : -dy;
463
464	/* overscroll? erase everything */
465	if (adx >= LCD_TEXT_WIDTH \|\| ady >= LCD_TEXT_HEIGHT) {
466	memset(sw_screen, 0, sizeof(sw_screen));
467	return;
468	}
469
470	sz = LCD_BYTE_LINESZ * ady;
471	if (dy > 0) {
472	p1 = &sw_screen[0];
473	p2 = &sw_screen[sz];
474	p3 = &sw_screen[LCD_BYTE_WIDTH * LCD_HEIGHT - sz];
475	} else if (dy < 0) {
476	p1 = &sw_screen[sz];
477	p2 = &sw_screen[0];
478	p3 = &sw_screen[0];
479	}
480
481	if (ady > 0) {
482	memmove(p1, p2, LCD_BYTE_WIDTH * LCD_HEIGHT - sz);
483	memset(p3, 0, sz);
484	}
485
486	sz = VIDEO_FONT_BYTE_WIDTH * adx;
487	if (dx > 0) {
488	p1 = &sw_screen[0];
489	p2 = &sw_screen[0] + sz;
490	p3 = &sw_screen[0] + LCD_BYTE_WIDTH - sz;
491	} else if (dx < 0) {
492	p1 = &sw_screen[0] + sz;
493	p2 = &sw_screen[0];
494	p3 = &sw_screen[0];
495	}
496
497	/* xscroll */
498	if (adx > 0) {
499	for (i = 0; i < LCD_HEIGHT; i++) {
500	memmove(p1, p2, LCD_BYTE_WIDTH - sz);
501	memset(p3, 0, sz);
502	p1 += LCD_BYTE_WIDTH;
503	p2 += LCD_BYTE_WIDTH;
504	p3 += LCD_BYTE_WIDTH;
505	}
506	}
507	}
508
509	void sed156x_init(void)
510	{
511	int i;
512
513	SED156X_CS(1);
514	SED156X_A0(1);
515
516	/* Send initialization commands to the LCD */
517	sed156x_cmd_transfer(LCD_OFF); /* Turn display OFF */
518	sed156x_cmd_transfer(LCD_BIAS); /* set the LCD Bias, */
519	sed156x_cmd_transfer(LCD_ADCMODE); /* ADC mode, */
520	sed156x_cmd_transfer(LCD_COMDIR); /* common output mode, */
521	sed156x_cmd_transfer(LCD_RESRT \| LCD_RRATIO); /* resistor ratio, */
522	sed156x_cmd_transfer(LCD_EVSET); /* electronic volume, */
523	sed156x_cmd_transfer(LCD_CNTRST);
524	sed156x_cmd_transfer(LCD_PWRMD \| LCD_POWERM); /* and power mode */
525	sed156x_cmd_transfer(LCD_PADDR \| 0); /* cursor home */
526	sed156x_cmd_transfer(LCD_CADRH \| 0);
527	sed156x_cmd_transfer(LCD_CADRL \| 0);
528	sed156x_cmd_transfer(LCD_LADDR \| 0); /* and display start line */
529	sed156x_cmd_transfer(LCD_DSP_NRM); /* LCD display Normal */
530
531	/* clear everything */
532	memset(sw_screen, 0, sizeof(sw_screen));
533	memset(hw_screen, 0, sizeof(hw_screen));
534	memset(last_hw_screen, 0, sizeof(last_hw_screen));
535
536	for (i = 0; i < LCD_PAGES; i++) {
537	sed156x_cmd_transfer(LCD_PADDR \| i);
538	sed156x_cmd_transfer(LCD_CADRH \| 0);
539	sed156x_cmd_transfer(LCD_CADRL \| 0);
540	sed156x_data_block_transfer(&hw_screen[i][0], LCD_COLUMNS);
541	}
542
543	sed156x_clear();
544	sed156x_sync();
545	sed156x_cmd_transfer(LCD_ON); /* Turn display ON */
546	}