projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| fe8c2806 WD |
1 | /* |
| 2 | * MPC8xx Communication Processor Module. | |
| 3 | * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) | |
| 4 | * | |
| 8cba090c | 5 | * (C) Copyright 2000-2006 |
| d4ca31c4 WD |
6 | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| 7 | * | |
| fe8c2806 WD |
8 | * This file contains structures and information for the communication |
| 9 | * processor channels. Some CPM control and status is available | |
| 10 | * throught the MPC8xx internal memory map. See immap.h for details. | |
| 11 | * This file only contains what I need for the moment, not the total | |
| 12 | * CPM capabilities. I (or someone else) will add definitions as they | |
| 13 | * are needed. -- Dan | |
| 14 | * | |
| 15 | * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 | |
| 16 | * bytes of the DP RAM and relocates the I2C parameter area to the | |
| 17 | * IDMA1 space. The remaining DP RAM is available for buffer descriptors | |
| 18 | * or other use. | |
| 19 | */ | |
| 20 | #ifndef __CPM_8XX__ | |
| 21 | #define __CPM_8XX__ | |
| 22 | ||
| 23 | #include <linux/config.h> | |
| 24 | #include <asm/8xx_immap.h> | |
| 25 | ||
| 26 | /* CPM Command register. | |
| 27 | */ | |
| 7c7a23bd WD |
28 | #define CPM_CR_RST ((ushort)0x8000) |
| 29 | #define CPM_CR_OPCODE ((ushort)0x0f00) | |
| 30 | #define CPM_CR_CHAN ((ushort)0x00f0) | |
| 31 | #define CPM_CR_FLG ((ushort)0x0001) | |
| fe8c2806 WD |
32 | |
| 33 | /* Some commands (there are more...later) | |
| 34 | */ | |
| 35 | #define CPM_CR_INIT_TRX ((ushort)0x0000) | |
| 36 | #define CPM_CR_INIT_RX ((ushort)0x0001) | |
| 37 | #define CPM_CR_INIT_TX ((ushort)0x0002) | |
| 38 | #define CPM_CR_HUNT_MODE ((ushort)0x0003) | |
| 39 | #define CPM_CR_STOP_TX ((ushort)0x0004) | |
| 40 | #define CPM_CR_RESTART_TX ((ushort)0x0006) | |
| 41 | #define CPM_CR_SET_GADDR ((ushort)0x0008) | |
| 42 | ||
| 43 | /* Channel numbers. | |
| 44 | */ | |
| 7c7a23bd WD |
45 | #define CPM_CR_CH_SCC1 ((ushort)0x0000) |
| 46 | #define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ | |
| 47 | #define CPM_CR_CH_SCC2 ((ushort)0x0004) | |
| 48 | #define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI/IDMA2/Timers */ | |
| 49 | #define CPM_CR_CH_SCC3 ((ushort)0x0008) | |
| 50 | #define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ | |
| 51 | #define CPM_CR_CH_SCC4 ((ushort)0x000c) | |
| 52 | #define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ | |
| fe8c2806 WD |
53 | |
| 54 | #define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) | |
| 55 | ||
| 56 | /* | |
| 57 | * DPRAM defines and allocation functions | |
| 58 | */ | |
| 59 | ||
| 60 | /* The dual ported RAM is multi-functional. Some areas can be (and are | |
| 61 | * being) used for microcode. There is an area that can only be used | |
| 62 | * as data ram for buffer descriptors, which is all we use right now. | |
| 63 | * Currently the first 512 and last 256 bytes are used for microcode. | |
| 64 | */ | |
| 65 | #ifdef CFG_ALLOC_DPRAM | |
| 66 | ||
| 67 | #define CPM_DATAONLY_BASE ((uint)0x0800) | |
| 68 | #define CPM_DATAONLY_SIZE ((uint)0x0700) | |
| 69 | #define CPM_DP_NOSPACE ((uint)0x7fffffff) | |
| 70 | ||
| 71 | #else | |
| 72 | ||
| 73 | #define CPM_SERIAL_BASE 0x0800 | |
| 74 | #define CPM_I2C_BASE 0x0820 | |
| 75 | #define CPM_SPI_BASE 0x0840 | |
| 76 | #define CPM_FEC_BASE 0x0860 | |
| 79536a6e | 77 | #define CPM_SERIAL2_BASE 0x08E0 |
| fe8c2806 WD |
78 | #define CPM_SCC_BASE 0x0900 |
| 79 | #define CPM_POST_BASE 0x0980 | |
| 281e00a3 | 80 | #define CPM_WLKBD_BASE 0x0a00 |
| fe8c2806 WD |
81 | |
| 82 | #endif | |
| 83 | ||
| ea909b76 | 84 | #ifndef CFG_CPM_POST_WORD_ADDR |
| fe8c2806 | 85 | #define CPM_POST_WORD_ADDR 0x07FC |
| ea909b76 WD |
86 | #else |
| 87 | #define CPM_POST_WORD_ADDR CFG_CPM_POST_WORD_ADDR | |
| 88 | #endif | |
| fe8c2806 | 89 | |
| bdccc4fe WD |
90 | #ifndef CFG_CPM_BOOTCOUNT_ADDR |
| 91 | #define CPM_BOOTCOUNT_ADDR (CPM_POST_WORD_ADDR - 2*sizeof(ulong)) | |
| 92 | #else | |
| 93 | #define CPM_BOOTCOUNT_ADDR CFG_CPM_BOOTCOUNT_ADDR | |
| 94 | #endif | |
| 95 | ||
| fe8c2806 WD |
96 | #define BD_IIC_START ((uint) 0x0400) /* <- please use CPM_I2C_BASE !! */ |
| 97 | ||
| 98 | /* Export the base address of the communication processor registers | |
| 99 | * and dual port ram. | |
| 100 | */ | |
| 101 | extern cpm8xx_t *cpmp; /* Pointer to comm processor */ | |
| 102 | ||
| 103 | /* Buffer descriptors used by many of the CPM protocols. | |
| 104 | */ | |
| 105 | typedef struct cpm_buf_desc { | |
| 106 | ushort cbd_sc; /* Status and Control */ | |
| 107 | ushort cbd_datlen; /* Data length in buffer */ | |
| 108 | uint cbd_bufaddr; /* Buffer address in host memory */ | |
| 109 | } cbd_t; | |
| 110 | ||
| 111 | #define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ | |
| 112 | #define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ | |
| 113 | #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ | |
| 114 | #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ | |
| 115 | #define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */ | |
| 116 | #define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ | |
| 117 | #define BD_SC_CM ((ushort)0x0200) /* Continous mode */ | |
| 118 | #define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */ | |
| 119 | #define BD_SC_P ((ushort)0x0100) /* xmt preamble */ | |
| 120 | #define BD_SC_BR ((ushort)0x0020) /* Break received */ | |
| 121 | #define BD_SC_FR ((ushort)0x0010) /* Framing error */ | |
| 122 | #define BD_SC_PR ((ushort)0x0008) /* Parity error */ | |
| 123 | #define BD_SC_OV ((ushort)0x0002) /* Overrun */ | |
| 124 | #define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */ | |
| 125 | ||
| 126 | /* Parameter RAM offsets. | |
| 127 | */ | |
| 128 | #define PROFF_SCC1 ((uint)0x0000) | |
| 129 | #define PROFF_IIC ((uint)0x0080) | |
| 130 | #define PROFF_SCC2 ((uint)0x0100) | |
| 131 | #define PROFF_SPI ((uint)0x0180) | |
| 132 | #define PROFF_SCC3 ((uint)0x0200) | |
| 133 | #define PROFF_SMC1 ((uint)0x0280) | |
| 134 | #define PROFF_SCC4 ((uint)0x0300) | |
| 135 | #define PROFF_SMC2 ((uint)0x0380) | |
| 136 | ||
| 137 | /* Define enough so I can at least use the serial port as a UART. | |
| 138 | * The MBX uses SMC1 as the host serial port. | |
| 139 | */ | |
| 140 | typedef struct smc_uart { | |
| 141 | ushort smc_rbase; /* Rx Buffer descriptor base address */ | |
| 142 | ushort smc_tbase; /* Tx Buffer descriptor base address */ | |
| 143 | u_char smc_rfcr; /* Rx function code */ | |
| 144 | u_char smc_tfcr; /* Tx function code */ | |
| 145 | ushort smc_mrblr; /* Max receive buffer length */ | |
| 146 | uint smc_rstate; /* Internal */ | |
| 147 | uint smc_idp; /* Internal */ | |
| 148 | ushort smc_rbptr; /* Internal */ | |
| 149 | ushort smc_ibc; /* Internal */ | |
| 150 | uint smc_rxtmp; /* Internal */ | |
| 151 | uint smc_tstate; /* Internal */ | |
| 152 | uint smc_tdp; /* Internal */ | |
| 153 | ushort smc_tbptr; /* Internal */ | |
| 154 | ushort smc_tbc; /* Internal */ | |
| 155 | uint smc_txtmp; /* Internal */ | |
| 156 | ushort smc_maxidl; /* Maximum idle characters */ | |
| 157 | ushort smc_tmpidl; /* Temporary idle counter */ | |
| 158 | ushort smc_brklen; /* Last received break length */ | |
| 159 | ushort smc_brkec; /* rcv'd break condition counter */ | |
| 160 | ushort smc_brkcr; /* xmt break count register */ | |
| 161 | ushort smc_rmask; /* Temporary bit mask */ | |
| 162 | } smc_uart_t; | |
| 163 | ||
| 164 | /* Function code bits. | |
| 165 | */ | |
| 166 | #define SMC_EB ((u_char)0x10) /* Set big endian byte order */ | |
| 167 | ||
| 168 | /* SMC uart mode register. | |
| 169 | */ | |
| 170 | #define SMCMR_REN ((ushort)0x0001) | |
| 171 | #define SMCMR_TEN ((ushort)0x0002) | |
| 172 | #define SMCMR_DM ((ushort)0x000c) | |
| 173 | #define SMCMR_SM_GCI ((ushort)0x0000) | |
| 174 | #define SMCMR_SM_UART ((ushort)0x0020) | |
| 175 | #define SMCMR_SM_TRANS ((ushort)0x0030) | |
| 176 | #define SMCMR_SM_MASK ((ushort)0x0030) | |
| 177 | #define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ | |
| 178 | #define SMCMR_REVD SMCMR_PM_EVEN | |
| 179 | #define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ | |
| 180 | #define SMCMR_BS SMCMR_PEN | |
| 181 | #define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ | |
| 182 | #define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ | |
| 183 | #define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) | |
| 184 | ||
| 185 | /* SMC2 as Centronics parallel printer. It is half duplex, in that | |
| 186 | * it can only receive or transmit. The parameter ram values for | |
| 187 | * each direction are either unique or properly overlap, so we can | |
| 188 | * include them in one structure. | |
| 189 | */ | |
| 190 | typedef struct smc_centronics { | |
| 191 | ushort scent_rbase; | |
| 192 | ushort scent_tbase; | |
| 193 | u_char scent_cfcr; | |
| 194 | u_char scent_smask; | |
| 195 | ushort scent_mrblr; | |
| 196 | uint scent_rstate; | |
| 197 | uint scent_r_ptr; | |
| 198 | ushort scent_rbptr; | |
| 199 | ushort scent_r_cnt; | |
| 200 | uint scent_rtemp; | |
| 201 | uint scent_tstate; | |
| 202 | uint scent_t_ptr; | |
| 203 | ushort scent_tbptr; | |
| 204 | ushort scent_t_cnt; | |
| 205 | uint scent_ttemp; | |
| 206 | ushort scent_max_sl; | |
| 207 | ushort scent_sl_cnt; | |
| 208 | ushort scent_character1; | |
| 209 | ushort scent_character2; | |
| 210 | ushort scent_character3; | |
| 211 | ushort scent_character4; | |
| 212 | ushort scent_character5; | |
| 213 | ushort scent_character6; | |
| 214 | ushort scent_character7; | |
| 215 | ushort scent_character8; | |
| 216 | ushort scent_rccm; | |
| 217 | ushort scent_rccr; | |
| 218 | } smc_cent_t; | |
| 219 | ||
| 220 | /* Centronics Status Mask Register. | |
| 221 | */ | |
| 222 | #define SMC_CENT_F ((u_char)0x08) | |
| 223 | #define SMC_CENT_PE ((u_char)0x04) | |
| 224 | #define SMC_CENT_S ((u_char)0x02) | |
| 225 | ||
| 226 | /* SMC Event and Mask register. | |
| 227 | */ | |
| 228 | #define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ | |
| 229 | #define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ | |
| 230 | #define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ | |
| 231 | #define SMCM_BSY ((unsigned char)0x04) | |
| 232 | #define SMCM_TX ((unsigned char)0x02) | |
| 233 | #define SMCM_RX ((unsigned char)0x01) | |
| 234 | ||
| 235 | /* Baud rate generators. | |
| 236 | */ | |
| 237 | #define CPM_BRG_RST ((uint)0x00020000) | |
| 238 | #define CPM_BRG_EN ((uint)0x00010000) | |
| 239 | #define CPM_BRG_EXTC_INT ((uint)0x00000000) | |
| 240 | #define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) | |
| 241 | #define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) | |
| 242 | #define CPM_BRG_ATB ((uint)0x00002000) | |
| 243 | #define CPM_BRG_CD_MASK ((uint)0x00001ffe) | |
| 244 | #define CPM_BRG_DIV16 ((uint)0x00000001) | |
| 245 | ||
| 246 | /* SI Clock Route Register | |
| 247 | */ | |
| 248 | #define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000) | |
| 249 | #define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000) | |
| 250 | #define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800) | |
| 251 | #define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100) | |
| 252 | #define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000) | |
| 253 | #define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000) | |
| 254 | #define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000) | |
| 255 | #define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000) | |
| 256 | ||
| 257 | /* SCCs. | |
| 258 | */ | |
| 259 | #define SCC_GSMRH_IRP ((uint)0x00040000) | |
| 260 | #define SCC_GSMRH_GDE ((uint)0x00010000) | |
| 261 | #define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) | |
| 262 | #define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) | |
| 263 | #define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) | |
| 264 | #define SCC_GSMRH_REVD ((uint)0x00002000) | |
| 265 | #define SCC_GSMRH_TRX ((uint)0x00001000) | |
| 266 | #define SCC_GSMRH_TTX ((uint)0x00000800) | |
| 267 | #define SCC_GSMRH_CDP ((uint)0x00000400) | |
| 268 | #define SCC_GSMRH_CTSP ((uint)0x00000200) | |
| 269 | #define SCC_GSMRH_CDS ((uint)0x00000100) | |
| 270 | #define SCC_GSMRH_CTSS ((uint)0x00000080) | |
| 271 | #define SCC_GSMRH_TFL ((uint)0x00000040) | |
| 272 | #define SCC_GSMRH_RFW ((uint)0x00000020) | |
| 273 | #define SCC_GSMRH_TXSY ((uint)0x00000010) | |
| 274 | #define SCC_GSMRH_SYNL16 ((uint)0x0000000c) | |
| 275 | #define SCC_GSMRH_SYNL8 ((uint)0x00000008) | |
| 276 | #define SCC_GSMRH_SYNL4 ((uint)0x00000004) | |
| 277 | #define SCC_GSMRH_RTSM ((uint)0x00000002) | |
| 278 | #define SCC_GSMRH_RSYN ((uint)0x00000001) | |
| 279 | ||
| 280 | #define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ | |
| 281 | #define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) | |
| 282 | #define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) | |
| 283 | #define SCC_GSMRL_EDGE_POS ((uint)0x20000000) | |
| 284 | #define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) | |
| 285 | #define SCC_GSMRL_TCI ((uint)0x10000000) | |
| 286 | #define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) | |
| 287 | #define SCC_GSMRL_TSNC_4 ((uint)0x08000000) | |
| 288 | #define SCC_GSMRL_TSNC_14 ((uint)0x04000000) | |
| 289 | #define SCC_GSMRL_TSNC_INF ((uint)0x00000000) | |
| 290 | #define SCC_GSMRL_RINV ((uint)0x02000000) | |
| 291 | #define SCC_GSMRL_TINV ((uint)0x01000000) | |
| 292 | #define SCC_GSMRL_TPL_128 ((uint)0x00c00000) | |
| 293 | #define SCC_GSMRL_TPL_64 ((uint)0x00a00000) | |
| 294 | #define SCC_GSMRL_TPL_48 ((uint)0x00800000) | |
| 295 | #define SCC_GSMRL_TPL_32 ((uint)0x00600000) | |
| 296 | #define SCC_GSMRL_TPL_16 ((uint)0x00400000) | |
| 297 | #define SCC_GSMRL_TPL_8 ((uint)0x00200000) | |
| 298 | #define SCC_GSMRL_TPL_NONE ((uint)0x00000000) | |
| 299 | #define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) | |
| 300 | #define SCC_GSMRL_TPP_01 ((uint)0x00100000) | |
| 301 | #define SCC_GSMRL_TPP_10 ((uint)0x00080000) | |
| 302 | #define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) | |
| 303 | #define SCC_GSMRL_TEND ((uint)0x00040000) | |
| 304 | #define SCC_GSMRL_TDCR_32 ((uint)0x00030000) | |
| 305 | #define SCC_GSMRL_TDCR_16 ((uint)0x00020000) | |
| 306 | #define SCC_GSMRL_TDCR_8 ((uint)0x00010000) | |
| 307 | #define SCC_GSMRL_TDCR_1 ((uint)0x00000000) | |
| 308 | #define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) | |
| 309 | #define SCC_GSMRL_RDCR_16 ((uint)0x00008000) | |
| 310 | #define SCC_GSMRL_RDCR_8 ((uint)0x00004000) | |
| 311 | #define SCC_GSMRL_RDCR_1 ((uint)0x00000000) | |
| 312 | #define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) | |
| 313 | #define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) | |
| 314 | #define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) | |
| 315 | #define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) | |
| 316 | #define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) | |
| 317 | #define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) | |
| 318 | #define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) | |
| 319 | #define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) | |
| 320 | #define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) | |
| 321 | #define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) | |
| 322 | #define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ | |
| 323 | #define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) | |
| 324 | #define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) | |
| 325 | #define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) | |
| 326 | #define SCC_GSMRL_ENR ((uint)0x00000020) | |
| 327 | #define SCC_GSMRL_ENT ((uint)0x00000010) | |
| 328 | #define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) | |
| 329 | #define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) | |
| 330 | #define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) | |
| 331 | #define SCC_GSMRL_MODE_V14 ((uint)0x00000007) | |
| 332 | #define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) | |
| 333 | #define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) | |
| 334 | #define SCC_GSMRL_MODE_UART ((uint)0x00000004) | |
| 335 | #define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) | |
| 336 | #define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) | |
| 337 | #define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) | |
| 338 | ||
| 339 | #define SCC_TODR_TOD ((ushort)0x8000) | |
| 340 | ||
| 341 | /* SCC Event and Mask register. | |
| 342 | */ | |
| 343 | #define SCCM_TXE ((unsigned char)0x10) | |
| 344 | #define SCCM_BSY ((unsigned char)0x04) | |
| 345 | #define SCCM_TX ((unsigned char)0x02) | |
| 346 | #define SCCM_RX ((unsigned char)0x01) | |
| 347 | ||
| 348 | typedef struct scc_param { | |
| 349 | ushort scc_rbase; /* Rx Buffer descriptor base address */ | |
| 350 | ushort scc_tbase; /* Tx Buffer descriptor base address */ | |
| 351 | u_char scc_rfcr; /* Rx function code */ | |
| 352 | u_char scc_tfcr; /* Tx function code */ | |
| 353 | ushort scc_mrblr; /* Max receive buffer length */ | |
| 354 | uint scc_rstate; /* Internal */ | |
| 355 | uint scc_idp; /* Internal */ | |
| 356 | ushort scc_rbptr; /* Internal */ | |
| 357 | ushort scc_ibc; /* Internal */ | |
| 358 | uint scc_rxtmp; /* Internal */ | |
| 359 | uint scc_tstate; /* Internal */ | |
| 360 | uint scc_tdp; /* Internal */ | |
| 361 | ushort scc_tbptr; /* Internal */ | |
| 362 | ushort scc_tbc; /* Internal */ | |
| 363 | uint scc_txtmp; /* Internal */ | |
| 364 | uint scc_rcrc; /* Internal */ | |
| 365 | uint scc_tcrc; /* Internal */ | |
| 366 | } sccp_t; | |
| 367 | ||
| 368 | /* Function code bits. | |
| 369 | */ | |
| 370 | #define SCC_EB ((u_char)0x10) /* Set big endian byte order */ | |
| 371 | ||
| 372 | /* CPM Ethernet through SCCx. | |
| 373 | */ | |
| 374 | typedef struct scc_enet { | |
| 375 | sccp_t sen_genscc; | |
| 376 | uint sen_cpres; /* Preset CRC */ | |
| 377 | uint sen_cmask; /* Constant mask for CRC */ | |
| 378 | uint sen_crcec; /* CRC Error counter */ | |
| 379 | uint sen_alec; /* alignment error counter */ | |
| 380 | uint sen_disfc; /* discard frame counter */ | |
| 381 | ushort sen_pads; /* Tx short frame pad character */ | |
| 382 | ushort sen_retlim; /* Retry limit threshold */ | |
| 383 | ushort sen_retcnt; /* Retry limit counter */ | |
| 384 | ushort sen_maxflr; /* maximum frame length register */ | |
| 385 | ushort sen_minflr; /* minimum frame length register */ | |
| 386 | ushort sen_maxd1; /* maximum DMA1 length */ | |
| 387 | ushort sen_maxd2; /* maximum DMA2 length */ | |
| 388 | ushort sen_maxd; /* Rx max DMA */ | |
| 389 | ushort sen_dmacnt; /* Rx DMA counter */ | |
| 390 | ushort sen_maxb; /* Max BD byte count */ | |
| 391 | ushort sen_gaddr1; /* Group address filter */ | |
| 392 | ushort sen_gaddr2; | |
| 393 | ushort sen_gaddr3; | |
| 394 | ushort sen_gaddr4; | |
| 395 | uint sen_tbuf0data0; /* Save area 0 - current frame */ | |
| 396 | uint sen_tbuf0data1; /* Save area 1 - current frame */ | |
| 397 | uint sen_tbuf0rba; /* Internal */ | |
| 398 | uint sen_tbuf0crc; /* Internal */ | |
| 399 | ushort sen_tbuf0bcnt; /* Internal */ | |
| 400 | ushort sen_paddrh; /* physical address (MSB) */ | |
| 401 | ushort sen_paddrm; | |
| 402 | ushort sen_paddrl; /* physical address (LSB) */ | |
| 403 | ushort sen_pper; /* persistence */ | |
| 404 | ushort sen_rfbdptr; /* Rx first BD pointer */ | |
| 405 | ushort sen_tfbdptr; /* Tx first BD pointer */ | |
| 406 | ushort sen_tlbdptr; /* Tx last BD pointer */ | |
| 407 | uint sen_tbuf1data0; /* Save area 0 - current frame */ | |
| 408 | uint sen_tbuf1data1; /* Save area 1 - current frame */ | |
| 409 | uint sen_tbuf1rba; /* Internal */ | |
| 410 | uint sen_tbuf1crc; /* Internal */ | |
| 411 | ushort sen_tbuf1bcnt; /* Internal */ | |
| 412 | ushort sen_txlen; /* Tx Frame length counter */ | |
| 413 | ushort sen_iaddr1; /* Individual address filter */ | |
| 414 | ushort sen_iaddr2; | |
| 415 | ushort sen_iaddr3; | |
| 416 | ushort sen_iaddr4; | |
| 417 | ushort sen_boffcnt; /* Backoff counter */ | |
| 418 | ||
| 419 | /* NOTE: Some versions of the manual have the following items | |
| 420 | * incorrectly documented. Below is the proper order. | |
| 421 | */ | |
| 422 | ushort sen_taddrh; /* temp address (MSB) */ | |
| 423 | ushort sen_taddrm; | |
| 424 | ushort sen_taddrl; /* temp address (LSB) */ | |
| 425 | } scc_enet_t; | |
| 426 | ||
| 427 | /********************************************************************** | |
| 428 | * | |
| 429 | * Board specific configuration settings. | |
| 430 | * | |
| 431 | * Please note that we use the presence of a #define SCC_ENET and/or | |
| 432 | * #define FEC_ENET to enable the SCC resp. FEC ethernet drivers. | |
| 433 | **********************************************************************/ | |
| 434 | ||
| 435 | ||
| 436 | /*** ADS *************************************************************/ | |
| 437 | ||
| 438 | #if defined(CONFIG_MPC860) && defined(CONFIG_ADS) | |
| 439 | /* This ENET stuff is for the MPC860ADS with ethernet on SCC1. | |
| 440 | */ | |
| 441 | ||
| 442 | #define PROFF_ENET PROFF_SCC1 | |
| 443 | #define CPM_CR_ENET CPM_CR_CH_SCC1 | |
| 444 | #define SCC_ENET 0 | |
| 445 | ||
| 446 | #define PA_ENET_RXD ((ushort)0x0001) | |
| 447 | #define PA_ENET_TXD ((ushort)0x0002) | |
| 448 | #define PA_ENET_TCLK ((ushort)0x0100) | |
| 449 | #define PA_ENET_RCLK ((ushort)0x0200) | |
| 450 | ||
| 451 | #define PB_ENET_TENA ((uint)0x00001000) | |
| 452 | ||
| 453 | #define PC_ENET_CLSN ((ushort)0x0010) | |
| 454 | #define PC_ENET_RENA ((ushort)0x0020) | |
| 455 | ||
| 456 | #define SICR_ENET_MASK ((uint)0x000000ff) | |
| 457 | #define SICR_ENET_CLKRT ((uint)0x0000002c) | |
| 458 | ||
| 459 | /* 68160 PHY control */ | |
| 460 | ||
| 461 | #define PC_ENET_ETHLOOP ((ushort)0x0800) | |
| 462 | #define PC_ENET_TPFLDL ((ushort)0x0400) | |
| 463 | #define PC_ENET_TPSQEL ((ushort)0x0200) | |
| 464 | ||
| 465 | #endif /* MPC860ADS */ | |
| 466 | ||
| 467 | /*** AMX860 **********************************************/ | |
| 468 | ||
| 469 | #if defined(CONFIG_AMX860) | |
| 470 | ||
| 471 | /* This ENET stuff is for the AMX860 with ethernet on SCC1. | |
| 472 | */ | |
| 473 | ||
| 474 | #define PROFF_ENET PROFF_SCC1 | |
| 475 | #define CPM_CR_ENET CPM_CR_CH_SCC1 | |
| 476 | #define SCC_ENET 0 | |
| 477 | ||
| 478 | #define PA_ENET_RXD ((ushort)0x0001) | |
| 479 | #define PA_ENET_TXD ((ushort)0x0002) | |
| 480 | #define PA_ENET_TCLK ((ushort)0x0400) | |
| 481 | #define PA_ENET_RCLK ((ushort)0x0800) | |
| 482 | ||
| 483 | #define PB_ENET_TENA ((uint)0x00001000) | |
| 484 | ||
| 485 | #define PC_ENET_CLSN ((ushort)0x0010) | |
| 486 | #define PC_ENET_RENA ((ushort)0x0020) | |
| 487 | ||
| 488 | #define SICR_ENET_MASK ((uint)0x000000ff) | |
| 489 | #define SICR_ENET_CLKRT ((uint)0x0000003e) | |
| 490 | ||
| 491 | /* 68160 PHY control */ | |
| 492 | ||
| 493 | #define PB_ENET_ETHLOOP ((uint)0x00020000) | |
| 494 | #define PB_ENET_TPFLDL ((uint)0x00010000) | |
| 495 | #define PB_ENET_TPSQEL ((uint)0x00008000) | |
| 496 | #define PD_ENET_ETH_EN ((ushort)0x0004) | |
| 497 | ||
| 498 | #endif /* CONFIG_AMX860 */ | |
| 499 | ||
| 500 | /*** BSEIP **********************************************************/ | |
| 501 | ||
| 502 | #ifdef CONFIG_BSEIP | |
| 503 | /* This ENET stuff is for the MPC823 with ethernet on SCC2. | |
| 504 | * This is unique to the BSE ip-Engine board. | |
| 505 | */ | |
| 506 | #define PROFF_ENET PROFF_SCC2 | |
| 507 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 508 | #define SCC_ENET 1 | |
| 509 | #define PA_ENET_RXD ((ushort)0x0004) | |
| 510 | #define PA_ENET_TXD ((ushort)0x0008) | |
| 511 | #define PA_ENET_TCLK ((ushort)0x0100) | |
| 512 | #define PA_ENET_RCLK ((ushort)0x0200) | |
| 513 | #define PB_ENET_TENA ((uint)0x00002000) | |
| 514 | #define PC_ENET_CLSN ((ushort)0x0040) | |
| 515 | #define PC_ENET_RENA ((ushort)0x0080) | |
| 516 | ||
| 517 | /* BSE uses port B and C bits for PHY control also. | |
| 518 | */ | |
| 519 | #define PB_BSE_POWERUP ((uint)0x00000004) | |
| 520 | #define PB_BSE_FDXDIS ((uint)0x00008000) | |
| 521 | #define PC_BSE_LOOPBACK ((ushort)0x0800) | |
| 522 | ||
| 523 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 524 | #define SICR_ENET_CLKRT ((uint)0x00002c00) | |
| 525 | #endif /* CONFIG_BSEIP */ | |
| 526 | ||
| 527 | /*** BSEIP **********************************************************/ | |
| 528 | ||
| 529 | #ifdef CONFIG_FLAGADM | |
| 530 | /* Enet configuration for the FLAGADM */ | |
| 531 | /* Enet on SCC2 */ | |
| 532 | ||
| 533 | #define PROFF_ENET PROFF_SCC2 | |
| 534 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 535 | #define SCC_ENET 1 | |
| 7c7a23bd WD |
536 | #define PA_ENET_RXD ((ushort)0x0004) |
| 537 | #define PA_ENET_TXD ((ushort)0x0008) | |
| fe8c2806 WD |
538 | #define PA_ENET_TCLK ((ushort)0x0100) |
| 539 | #define PA_ENET_RCLK ((ushort)0x0400) | |
| 540 | #define PB_ENET_TENA ((uint)0x00002000) | |
| 541 | #define PC_ENET_CLSN ((ushort)0x0040) | |
| 542 | #define PC_ENET_RENA ((ushort)0x0080) | |
| 543 | ||
| 544 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 545 | #define SICR_ENET_CLKRT ((uint)0x00003400) | |
| 546 | #endif /* CONFIG_FLAGADM */ | |
| 547 | ||
| 548 | /*** C2MON **********************************************************/ | |
| 549 | ||
| 550 | #ifdef CONFIG_C2MON | |
| 551 | ||
| 552 | # ifndef CONFIG_FEC_ENET /* use SCC for 10Mbps Ethernet */ | |
| 553 | # error "Ethernet on SCC not supported on C2MON Board!" | |
| 554 | # else /* Use FEC for Fast Ethernet */ | |
| 555 | ||
| 556 | #undef SCC_ENET | |
| 557 | #define FEC_ENET | |
| 558 | ||
| 559 | #define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ | |
| 560 | #define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ | |
| 561 | #define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ | |
| 562 | #define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ | |
| 563 | #define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ | |
| 564 | #define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ | |
| 565 | #define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ | |
| 566 | #define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ | |
| 567 | #define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ | |
| 568 | #define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ | |
| 569 | #define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ | |
| 570 | #define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ | |
| 571 | #define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ | |
| 572 | ||
| 573 | #define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ | |
| 574 | ||
| 575 | # endif /* CONFIG_FEC_ENET */ | |
| 576 | #endif /* CONFIG_C2MON */ | |
| 577 | ||
| 578 | /*********************************************************************/ | |
| 579 | ||
| 580 | ||
| 581 | /*** CCM and PCU E ***********************************************/ | |
| 582 | ||
| 583 | /* The PCU E and CCM use the FEC on a MPC860T for Ethernet */ | |
| 584 | ||
| 585 | #if defined (CONFIG_PCU_E) || defined(CONFIG_CCM) | |
| 586 | ||
| 587 | #define FEC_ENET /* use FEC for EThernet */ | |
| 588 | #undef SCC_ENET | |
| 589 | ||
| 590 | #define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ | |
| 591 | #define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ | |
| 592 | #define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ | |
| 593 | #define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ | |
| 594 | #define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ | |
| 595 | #define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ | |
| 596 | #define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ | |
| 597 | #define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ | |
| 598 | #define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ | |
| 599 | #define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ | |
| 600 | #define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ | |
| 601 | #define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ | |
| 602 | #define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ | |
| 603 | ||
| 604 | #define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ | |
| 605 | ||
| 606 | #endif /* CONFIG_PCU_E, CONFIG_CCM */ | |
| 607 | ||
| 3bac3513 WD |
608 | /*** ELPT860 *********************************************************/ |
| 609 | ||
| 610 | #ifdef CONFIG_ELPT860 | |
| 611 | /* Bits in parallel I/O port registers that have to be set/cleared | |
| 612 | * to configure the pins for SCC1 use. | |
| 613 | */ | |
| 614 | # define PROFF_ENET PROFF_SCC1 | |
| 615 | # define CPM_CR_ENET CPM_CR_CH_SCC1 | |
| 616 | # define SCC_ENET 0 | |
| 617 | ||
| 618 | # define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */ | |
| 619 | # define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */ | |
| 620 | # define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ | |
| 621 | # define PA_ENET_TCLK ((ushort)0x0200) /* PA 6 */ | |
| 622 | ||
| 623 | # define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */ | |
| 624 | # define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */ | |
| 625 | # define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */ | |
| 626 | ||
| 627 | /* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK1) to | |
| 628 | * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. | |
| 629 | */ | |
| 630 | # define SICR_ENET_MASK ((uint)0x000000FF) | |
| 631 | # define SICR_ENET_CLKRT ((uint)0x00000025) | |
| 632 | #endif /* CONFIG_ELPT860 */ | |
| 633 | ||
| fe8c2806 WD |
634 | /*** ESTEEM 192E **************************************************/ |
| 635 | #ifdef CONFIG_ESTEEM192E | |
| 636 | /* ESTEEM192E | |
| 637 | * This ENET stuff is for the MPC850 with ethernet on SCC2. This | |
| 638 | * is very similar to the RPX-Lite configuration. | |
| 639 | * Note TENA , LOOPBACK , FDPLEX_DIS on Port B. | |
| 640 | */ | |
| 641 | ||
| 642 | #define PROFF_ENET PROFF_SCC2 | |
| 643 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 644 | #define SCC_ENET 1 | |
| 645 | ||
| 646 | #define PA_ENET_RXD ((ushort)0x0004) | |
| 647 | #define PA_ENET_TXD ((ushort)0x0008) | |
| 648 | #define PA_ENET_TCLK ((ushort)0x0200) | |
| 649 | #define PA_ENET_RCLK ((ushort)0x0800) | |
| 650 | #define PB_ENET_TENA ((uint)0x00002000) | |
| 651 | #define PC_ENET_CLSN ((ushort)0x0040) | |
| 652 | #define PC_ENET_RENA ((ushort)0x0080) | |
| 653 | ||
| 654 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 655 | #define SICR_ENET_CLKRT ((uint)0x00003d00) | |
| 656 | ||
| 657 | #define PB_ENET_LOOPBACK ((uint)0x00004000) | |
| 658 | #define PB_ENET_FDPLEX_DIS ((uint)0x00008000) | |
| 659 | ||
| 660 | #endif | |
| 661 | ||
| 662 | /*** FADS823 ********************************************************/ | |
| 663 | ||
| 664 | #if defined(CONFIG_MPC823FADS) && defined(CONFIG_FADS) | |
| 665 | /* This ENET stuff is for the MPC823FADS with ethernet on SCC2. | |
| 666 | */ | |
| 667 | #ifdef CONFIG_SCC2_ENET | |
| 668 | #define PROFF_ENET PROFF_SCC2 | |
| 669 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 670 | #define SCC_ENET 1 | |
| 671 | #define CPMVEC_ENET CPMVEC_SCC2 | |
| 672 | #endif | |
| 673 | ||
| 674 | #ifdef CONFIG_SCC1_ENET | |
| 675 | #define PROFF_ENET PROFF_SCC1 | |
| 676 | #define CPM_CR_ENET CPM_CR_CH_SCC1 | |
| 677 | #define SCC_ENET 0 | |
| 678 | #define CPMVEC_ENET CPMVEC_SCC1 | |
| 679 | #endif | |
| 680 | ||
| 681 | #define PA_ENET_RXD ((ushort)0x0004) | |
| 682 | #define PA_ENET_TXD ((ushort)0x0008) | |
| 683 | #define PA_ENET_TCLK ((ushort)0x0400) | |
| 684 | #define PA_ENET_RCLK ((ushort)0x0200) | |
| 685 | ||
| 686 | #define PB_ENET_TENA ((uint)0x00002000) | |
| 687 | ||
| 688 | #define PC_ENET_CLSN ((ushort)0x0040) | |
| 689 | #define PC_ENET_RENA ((ushort)0x0080) | |
| 690 | ||
| 691 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 692 | #define SICR_ENET_CLKRT ((uint)0x00002e00) | |
| 693 | ||
| 694 | #endif /* CONFIG_FADS823FADS */ | |
| 695 | ||
| 696 | /*** FADS850SAR ********************************************************/ | |
| 697 | ||
| 698 | #if defined(CONFIG_MPC850SAR) && defined(CONFIG_FADS) | |
| 699 | /* This ENET stuff is for the MPC850SAR with ethernet on SCC2. Some of | |
| 700 | * this may be unique to the FADS850SAR configuration. | |
| 701 | * Note TENA is on Port B. | |
| 702 | */ | |
| 703 | #define PROFF_ENET PROFF_SCC2 | |
| 704 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 705 | #define SCC_ENET 1 | |
| 706 | #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ | |
| 707 | #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ | |
| 708 | #define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ | |
| 709 | #define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */ | |
| 710 | #define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ | |
| 711 | #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ | |
| 712 | #define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ | |
| 713 | ||
| 714 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 715 | #define SICR_ENET_CLKRT ((uint)0x00002f00) /* RCLK-CLK2, TCLK-CLK4 */ | |
| 716 | #endif /* CONFIG_FADS850SAR */ | |
| 717 | ||
| 718 | /*** FADS860T********************************************************/ | |
| 719 | ||
| 180d3f74 WD |
720 | #if defined(CONFIG_FADS) && defined(CONFIG_MPC86x) |
| 721 | /* | |
| 722 | * This ENET stuff is for the MPC86xFADS/MPC8xxADS with ethernet on SCC1. | |
| fe8c2806 | 723 | */ |
| fe8c2806 | 724 | #ifdef CONFIG_SCC1_ENET |
| 180d3f74 | 725 | |
| fe8c2806 | 726 | #define SCC_ENET 0 |
| 180d3f74 | 727 | |
| fe8c2806 WD |
728 | #define PROFF_ENET PROFF_SCC1 |
| 729 | #define CPM_CR_ENET CPM_CR_CH_SCC1 | |
| 730 | ||
| 731 | #define PA_ENET_RXD ((ushort)0x0001) | |
| 732 | #define PA_ENET_TXD ((ushort)0x0002) | |
| 733 | #define PA_ENET_TCLK ((ushort)0x0100) | |
| 734 | #define PA_ENET_RCLK ((ushort)0x0200) | |
| 735 | ||
| 736 | #define PB_ENET_TENA ((uint)0x00001000) | |
| 737 | ||
| 738 | #define PC_ENET_CLSN ((ushort)0x0010) | |
| 739 | #define PC_ENET_RENA ((ushort)0x0020) | |
| 740 | ||
| 741 | #define SICR_ENET_MASK ((uint)0x000000ff) | |
| 742 | #define SICR_ENET_CLKRT ((uint)0x0000002c) | |
| 743 | ||
| 180d3f74 WD |
744 | #endif /* CONFIG_SCC1_ETHERNET */ |
| 745 | ||
| 746 | /* | |
| 1114257c WD |
747 | * This ENET stuff is for the MPC860TFADS/MPC86xADS/MPC885ADS |
| 748 | * with ethernet on FEC. | |
| fe8c2806 WD |
749 | */ |
| 750 | ||
| 751 | #ifdef CONFIG_FEC_ENET | |
| 180d3f74 WD |
752 | #define FEC_ENET /* Use FEC for Ethernet */ |
| 753 | #endif /* CONFIG_FEC_ENET */ | |
| fe8c2806 | 754 | |
| 180d3f74 | 755 | #endif /* CONFIG_FADS && CONFIG_MPC86x */ |
| fe8c2806 | 756 | |
| 384ae025 | 757 | /*** FPS850L, FPS860L ************************************************/ |
| fe8c2806 | 758 | |
| 384ae025 | 759 | #if defined(CONFIG_FPS850L) || defined(CONFIG_FPS860L) |
| fe8c2806 | 760 | /* Bits in parallel I/O port registers that have to be set/cleared |
| 384ae025 | 761 | * to configure the pins for SCC2 use. |
| fe8c2806 WD |
762 | */ |
| 763 | #define PROFF_ENET PROFF_SCC2 | |
| 764 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 765 | #define SCC_ENET 1 | |
| 766 | #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ | |
| 767 | #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ | |
| 768 | #define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ | |
| 769 | #define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ | |
| 770 | ||
| 771 | #define PC_ENET_TENA ((ushort)0x0002) /* PC 14 */ | |
| 772 | #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ | |
| 773 | #define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ | |
| 774 | ||
| 775 | /* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to | |
| 776 | * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. | |
| 777 | */ | |
| 778 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 779 | #define SICR_ENET_CLKRT ((uint)0x00002600) | |
| 384ae025 | 780 | #endif /* CONFIG_FPS850L, CONFIG_FPS860L */ |
| fe8c2806 WD |
781 | |
| 782 | /*** GEN860T **********************************************************/ | |
| 783 | #if defined(CONFIG_GEN860T) | |
| 784 | #undef SCC_ENET | |
| 785 | #define FEC_ENET | |
| 786 | ||
| 787 | #define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ | |
| 788 | #define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ | |
| 789 | #define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ | |
| 790 | #define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ | |
| 791 | #define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ | |
| 792 | #define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ | |
| 793 | #define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ | |
| 794 | #define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ | |
| 795 | #define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ | |
| 796 | #define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ | |
| 797 | #define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ | |
| 798 | #define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ | |
| 799 | #define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ | |
| 800 | #define PD_MII_MASK ((ushort)0x1FFF) /* PD 3-15 */ | |
| 801 | #endif /* CONFIG_GEN860T */ | |
| 802 | ||
| 803 | /*** GENIETV ********************************************************/ | |
| 804 | ||
| 805 | #if defined(CONFIG_GENIETV) | |
| 806 | /* Ethernet is only on SCC2 */ | |
| 807 | ||
| 808 | #define CONFIG_SCC2_ENET | |
| 809 | #define PROFF_ENET PROFF_SCC2 | |
| 810 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 811 | #define SCC_ENET 1 | |
| 812 | #define CPMVEC_ENET CPMVEC_SCC2 | |
| 813 | ||
| 814 | #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ | |
| 815 | #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ | |
| 816 | #define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ | |
| 817 | #define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ | |
| 818 | ||
| 819 | #define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ | |
| 820 | ||
| 821 | #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ | |
| 822 | #define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ | |
| 823 | ||
| 824 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 825 | #define SICR_ENET_CLKRT ((uint)0x00002e00) | |
| 826 | ||
| 827 | #endif /* CONFIG_GENIETV */ | |
| 828 | ||
| 829 | /*** GTH ******************************************************/ | |
| 830 | ||
| 831 | #ifdef CONFIG_GTH | |
| 832 | #ifdef CONFIG_FEC_ENET | |
| 833 | #define FEC_ENET /* use FEC for EThernet */ | |
| 834 | #endif /* CONFIG_FEC_ETHERNET */ | |
| 835 | ||
| 836 | /* This ENET stuff is for GTH 10 Mbit ( SCC ) */ | |
| 837 | #define PROFF_ENET PROFF_SCC1 | |
| 838 | #define CPM_CR_ENET CPM_CR_CH_SCC1 | |
| 839 | #define SCC_ENET 0 | |
| 840 | ||
| 841 | #define PA_ENET_RXD ((ushort)0x0001) /* PA15 */ | |
| 842 | #define PA_ENET_TXD ((ushort)0x0002) /* PA14 */ | |
| 843 | #define PA_ENET_TCLK ((ushort)0x0800) /* PA4 */ | |
| 844 | #define PA_ENET_RCLK ((ushort)0x0400) /* PA5 */ | |
| 845 | ||
| 846 | #define PB_ENET_TENA ((uint)0x00001000) /* PB19 */ | |
| 847 | ||
| 848 | #define PC_ENET_CLSN ((ushort)0x0010) /* PC11 */ | |
| 849 | #define PC_ENET_RENA ((ushort)0x0020) /* PC10 */ | |
| 850 | ||
| 851 | /* NOTE. This is reset for 10Mbit port only */ | |
| 852 | #define PC_ENET_RESET ((ushort)0x0100) /* PC 7 */ | |
| 853 | ||
| 854 | #define SICR_ENET_MASK ((uint)0x000000ff) | |
| 855 | ||
| 856 | /* TCLK PA4 -->CLK4, RCLK PA5 -->CLK3 */ | |
| 857 | #define SICR_ENET_CLKRT ((uint)0x00000037) | |
| 858 | ||
| 859 | #endif /* CONFIG_GTH */ | |
| 860 | ||
| 861 | /*** HERMES-PRO ******************************************************/ | |
| 862 | ||
| 863 | /* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */ | |
| 864 | ||
| 865 | #ifdef CONFIG_HERMES | |
| 866 | ||
| 867 | #define FEC_ENET /* use FEC for EThernet */ | |
| 868 | #undef SCC_ENET | |
| 869 | ||
| 870 | ||
| 871 | #define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ | |
| 872 | #define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ | |
| 873 | #define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ | |
| 874 | #define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ | |
| 875 | #define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ | |
| 876 | #define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ | |
| 877 | #define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ | |
| 878 | #define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ | |
| 879 | #define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ | |
| 880 | #define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ | |
| 881 | #define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ | |
| 882 | #define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ | |
| 883 | #define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ | |
| 884 | ||
| 885 | #define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ | |
| 886 | ||
| 887 | #endif /* CONFIG_HERMES */ | |
| 888 | ||
| 889 | /*** IAD210 **********************************************************/ | |
| 890 | ||
| 891 | /* The IAD210 uses the FEC on a MPC860P for Ethernet */ | |
| 892 | ||
| 893 | #if defined(CONFIG_IAD210) | |
| 894 | ||
| 895 | # define FEC_ENET /* use FEC for Ethernet */ | |
| 896 | # undef SCC_ENET | |
| 897 | ||
| 898 | # define PD_MII_TXD1 ((ushort) 0x1000 ) /* PD 3 */ | |
| 899 | # define PD_MII_TXD2 ((ushort) 0x0800 ) /* PD 4 */ | |
| 900 | # define PD_MII_TXD3 ((ushort) 0x0400 ) /* PD 5 */ | |
| 901 | # define PD_MII_RX_DV ((ushort) 0x0200 ) /* PD 6 */ | |
| 902 | # define PD_MII_RX_ERR ((ushort) 0x0100 ) /* PD 7 */ | |
| 903 | # define PD_MII_RX_CLK ((ushort) 0x0080 ) /* PD 8 */ | |
| 904 | # define PD_MII_TXD0 ((ushort) 0x0040 ) /* PD 9 */ | |
| 905 | # define PD_MII_RXD0 ((ushort) 0x0020 ) /* PD 10 */ | |
| 906 | # define PD_MII_TX_ERR ((ushort) 0x0010 ) /* PD 11 */ | |
| 907 | # define PD_MII_MDC ((ushort) 0x0008 ) /* PD 12 */ | |
| 908 | # define PD_MII_RXD1 ((ushort) 0x0004 ) /* PD 13 */ | |
| 909 | # define PD_MII_RXD2 ((ushort) 0x0002 ) /* PD 14 */ | |
| 910 | # define PD_MII_RXD3 ((ushort) 0x0001 ) /* PD 15 */ | |
| 911 | ||
| 912 | # define PD_MII_MASK ((ushort) 0x1FFF ) /* PD 3...15 */ | |
| 913 | ||
| 914 | #endif /* CONFIG_IAD210 */ | |
| 915 | ||
| 916 | /*** ICU862 **********************************************************/ | |
| 917 | ||
| 918 | #if defined(CONFIG_ICU862) | |
| 919 | ||
| 920 | #ifdef CONFIG_FEC_ENET | |
| 921 | #define FEC_ENET /* use FEC for EThernet */ | |
| 922 | #endif /* CONFIG_FEC_ETHERNET */ | |
| 923 | ||
| 924 | #endif /* CONFIG_ICU862 */ | |
| 925 | ||
| 926 | /*** IP860 **********************************************************/ | |
| 927 | ||
| 928 | #if defined(CONFIG_IP860) | |
| 929 | /* Bits in parallel I/O port registers that have to be set/cleared | |
| 930 | * to configure the pins for SCC1 use. | |
| 931 | */ | |
| 932 | #define PROFF_ENET PROFF_SCC1 | |
| 933 | #define CPM_CR_ENET CPM_CR_CH_SCC1 | |
| 934 | #define SCC_ENET 0 | |
| 935 | #define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */ | |
| 936 | #define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */ | |
| 937 | #define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ | |
| 938 | #define PA_ENET_TCLK ((ushort)0x0100) /* PA 7 */ | |
| 939 | ||
| 940 | #define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */ | |
| 941 | #define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */ | |
| 942 | #define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */ | |
| 943 | ||
| 944 | #define PB_ENET_RESET (uint)0x00000008 /* PB 28 */ | |
| 945 | #define PB_ENET_JABD (uint)0x00000004 /* PB 29 */ | |
| 946 | ||
| 947 | /* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to | |
| 948 | * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. | |
| 949 | */ | |
| 950 | #define SICR_ENET_MASK ((uint)0x000000ff) | |
| 951 | #define SICR_ENET_CLKRT ((uint)0x0000002C) | |
| 952 | #endif /* CONFIG_IP860 */ | |
| 953 | ||
| 954 | /*** IVMS8 **********************************************************/ | |
| 955 | ||
| 956 | /* The IVMS8 uses the FEC on a MPC860T for Ethernet */ | |
| 957 | ||
| 958 | #if defined(CONFIG_IVMS8) || defined(CONFIG_IVML24) | |
| 959 | ||
| 960 | #define FEC_ENET /* use FEC for EThernet */ | |
| 961 | #undef SCC_ENET | |
| 962 | ||
| 963 | #define PB_ENET_POWER ((uint)0x00010000) /* PB 15 */ | |
| 964 | ||
| 965 | #define PC_ENET_RESET ((ushort)0x0010) /* PC 11 */ | |
| 966 | ||
| 967 | #define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ | |
| 968 | #define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ | |
| 969 | #define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ | |
| 970 | #define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ | |
| 971 | #define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ | |
| 972 | #define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ | |
| 973 | #define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ | |
| 974 | #define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ | |
| 975 | #define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ | |
| 976 | #define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ | |
| 977 | #define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ | |
| 978 | #define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ | |
| 979 | #define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ | |
| 980 | ||
| 981 | #define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ | |
| 982 | ||
| 983 | #endif /* CONFIG_IVMS8, CONFIG_IVML24 */ | |
| 984 | ||
| 0608e04d WD |
985 | /*** KUP4K, KUP4X ****************************************************/ |
| 986 | /* The KUP4 boards uses the FEC on a MPC8xx for Ethernet */ | |
| 56f94be3 | 987 | |
| 0608e04d | 988 | #if defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X) |
| 56f94be3 WD |
989 | |
| 990 | #define FEC_ENET /* use FEC for EThernet */ | |
| 991 | #undef SCC_ENET | |
| 992 | ||
| 993 | #define PB_ENET_POWER ((uint)0x00010000) /* PB 15 */ | |
| 994 | ||
| 995 | #define PC_ENET_RESET ((ushort)0x0010) /* PC 11 */ | |
| 996 | ||
| 997 | #define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ | |
| 998 | #define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ | |
| 999 | #define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ | |
| 1000 | #define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ | |
| 1001 | #define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ | |
| 1002 | #define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ | |
| 1003 | #define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ | |
| 1004 | #define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ | |
| 1005 | #define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ | |
| 1006 | #define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ | |
| 1007 | #define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ | |
| 1008 | #define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ | |
| 1009 | #define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ | |
| 1010 | ||
| 1011 | #define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ | |
| 1012 | ||
| 1013 | #endif /* CONFIG_KUP4K */ | |
| 1014 | ||
| 1015 | ||
| fe8c2806 WD |
1016 | /*** LANTEC *********************************************************/ |
| 1017 | ||
| 1018 | #if defined(CONFIG_LANTEC) && CONFIG_LANTEC >= 2 | |
| 1019 | /* Bits in parallel I/O port registers that have to be set/cleared | |
| 1020 | * to configure the pins for SCC2 use. | |
| 1021 | */ | |
| 1022 | #define PROFF_ENET PROFF_SCC2 | |
| 1023 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 1024 | #define SCC_ENET 1 | |
| 1025 | #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ | |
| 1026 | #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ | |
| 1027 | #define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ | |
| 1028 | #define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ | |
| 1029 | ||
| 1030 | #define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ | |
| 1031 | ||
| 1032 | #define PC_ENET_LBK ((ushort)0x0010) /* PC 11 */ | |
| 1033 | #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ | |
| 1034 | #define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ | |
| 1035 | ||
| 1036 | /* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to | |
| 1037 | * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. | |
| 1038 | */ | |
| 1039 | #define SICR_ENET_MASK ((uint)0x0000FF00) | |
| 1040 | #define SICR_ENET_CLKRT ((uint)0x00002E00) | |
| 1041 | #endif /* CONFIG_LANTEC v2 */ | |
| 1042 | ||
| 1043 | /*** LWMON **********************************************************/ | |
| 1044 | ||
| 281e00a3 | 1045 | #if defined(CONFIG_LWMON) |
| fe8c2806 WD |
1046 | /* Bits in parallel I/O port registers that have to be set/cleared |
| 1047 | * to configure the pins for SCC2 use. | |
| 1048 | */ | |
| 1049 | #define PROFF_ENET PROFF_SCC2 | |
| 1050 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 1051 | #define SCC_ENET 1 | |
| 1052 | #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ | |
| 1053 | #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ | |
| 1054 | #define PA_ENET_RCLK ((ushort)0x0800) /* PA 4 */ | |
| 1055 | #define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ | |
| 1056 | ||
| 1057 | #define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ | |
| 1058 | ||
| 1059 | #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ | |
| 1060 | #define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ | |
| 1061 | ||
| 1062 | /* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK4) to | |
| 1063 | * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. | |
| 1064 | */ | |
| 1065 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 1066 | #define SICR_ENET_CLKRT ((uint)0x00003E00) | |
| 1067 | #endif /* CONFIG_LWMON */ | |
| 1068 | ||
| 1069 | /*** NX823 ***********************************************/ | |
| 1070 | ||
| 1071 | #if defined(CONFIG_NX823) | |
| 1072 | /* Bits in parallel I/O port registers that have to be set/cleared | |
| 1073 | * to configure the pins for SCC1 use. | |
| 1074 | */ | |
| 1075 | #define PROFF_ENET PROFF_SCC2 | |
| 1076 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 1077 | #define SCC_ENET 1 | |
| 7c7a23bd WD |
1078 | #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ |
| 1079 | #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ | |
| 1080 | #define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ | |
| 1081 | #define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */ | |
| fe8c2806 | 1082 | |
| 7c7a23bd | 1083 | #define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ |
| fe8c2806 | 1084 | |
| 7c7a23bd WD |
1085 | #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ |
| 1086 | #define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ | |
| fe8c2806 WD |
1087 | |
| 1088 | /* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to | |
| 1089 | * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. | |
| 1090 | */ | |
| 7c7a23bd WD |
1091 | #define SICR_ENET_MASK ((uint)0x0000ff00) |
| 1092 | #define SICR_ENET_CLKRT ((uint)0x00002f00) | |
| fe8c2806 WD |
1093 | |
| 1094 | #endif /* CONFIG_NX823 */ | |
| 1095 | ||
| 1096 | /*** MBX ************************************************************/ | |
| 1097 | ||
| 1098 | #ifdef CONFIG_MBX | |
| 1099 | /* Bits in parallel I/O port registers that have to be set/cleared | |
| 1100 | * to configure the pins for SCC1 use. The TCLK and RCLK seem unique | |
| 1101 | * to the MBX860 board. Any two of the four available clocks could be | |
| 1102 | * used, and the MPC860 cookbook manual has an example using different | |
| 1103 | * clock pins. | |
| 1104 | */ | |
| 1105 | #define PROFF_ENET PROFF_SCC1 | |
| 1106 | #define CPM_CR_ENET CPM_CR_CH_SCC1 | |
| 1107 | #define SCC_ENET 0 | |
| 1108 | #define PA_ENET_RXD ((ushort)0x0001) | |
| 1109 | #define PA_ENET_TXD ((ushort)0x0002) | |
| 1110 | #define PA_ENET_TCLK ((ushort)0x0200) | |
| 1111 | #define PA_ENET_RCLK ((ushort)0x0800) | |
| 1112 | #define PC_ENET_TENA ((ushort)0x0001) | |
| 1113 | #define PC_ENET_CLSN ((ushort)0x0010) | |
| 1114 | #define PC_ENET_RENA ((ushort)0x0020) | |
| 1115 | ||
| 1116 | /* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to | |
| 1117 | * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. | |
| 1118 | */ | |
| 1119 | #define SICR_ENET_MASK ((uint)0x000000ff) | |
| 1120 | #define SICR_ENET_CLKRT ((uint)0x0000003d) | |
| 1121 | #endif /* CONFIG_MBX */ | |
| 1122 | ||
| 1123 | /*** MHPC ********************************************************/ | |
| 1124 | ||
| 1125 | #if defined(CONFIG_MHPC) | |
| 1126 | /* This ENET stuff is for the MHPC with ethernet on SCC2. | |
| 1127 | * Note TENA is on Port B. | |
| 1128 | */ | |
| 1129 | #define PROFF_ENET PROFF_SCC2 | |
| 1130 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 1131 | #define SCC_ENET 1 | |
| 1132 | #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ | |
| 1133 | #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ | |
| 1134 | #define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ | |
| 1135 | #define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ | |
| 1136 | #define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ | |
| 1137 | #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ | |
| 1138 | #define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ | |
| 1139 | ||
| 1140 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 1141 | #define SICR_ENET_CLKRT ((uint)0x00002e00) /* RCLK-CLK2, TCLK-CLK3 */ | |
| 1142 | #endif /* CONFIG_MHPC */ | |
| 1143 | ||
| 608c9146 WD |
1144 | /*** NETVIA *******************************************************/ |
| 1145 | ||
| dc7c9a1a WD |
1146 | /* SinoVee Microsystems SC8xx series FEL8xx-AT,SC823,SC850,SC855T,SC860T */ |
| 1147 | #if ( defined CONFIG_SVM_SC8xx ) | |
| 1148 | # ifndef CONFIG_FEC_ENET | |
| 1149 | ||
| 1150 | #define PROFF_ENET PROFF_SCC2 | |
| 1151 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 1152 | #define SCC_ENET 1 | |
| 1153 | ||
| 1154 | /* Bits in parallel I/O port registers that have to be set/cleared | |
| 1155 | * * * * to configure the pins for SCC2 use. | |
| 1156 | * * * */ | |
| 1157 | #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ | |
| 1158 | #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ | |
| 1159 | #define PA_ENET_RCLK ((ushort)0x0400) /* PA 5 */ | |
| 1160 | #define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */ | |
| 1161 | ||
| 1162 | #define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ | |
| 1163 | ||
| 1164 | #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ | |
| 1165 | #define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ | |
| 1166 | /* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to | |
| 1167 | * * * * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. | |
| 1168 | * * * */ | |
| 1169 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 1170 | #define SICR_ENET_CLKRT ((uint)0x00003700) | |
| 1171 | ||
| 1172 | # else /* Use FEC for Fast Ethernet */ | |
| 1173 | ||
| 1174 | #undef SCC_ENET | |
| 1175 | #define FEC_ENET | |
| 1176 | ||
| 1177 | #define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ | |
| 1178 | #define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ | |
| 1179 | #define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ | |
| 1180 | #define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ | |
| 1181 | #define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ | |
| 1182 | #define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ | |
| 1183 | #define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ | |
| 1184 | #define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ | |
| 1185 | #define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ | |
| 1186 | #define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ | |
| 1187 | #define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ | |
| 1188 | #define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ | |
| 1189 | #define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ | |
| 1190 | ||
| 1191 | #define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ | |
| 1192 | ||
| 1193 | # endif /* CONFIG_FEC_ENET */ | |
| 1194 | #endif /* CONFIG_SVM_SC8xx */ | |
| 8bde7f77 WD |
1195 | |
| 1196 | ||
| 608c9146 WD |
1197 | #if defined(CONFIG_NETVIA) |
| 1198 | /* Bits in parallel I/O port registers that have to be set/cleared | |
| 1199 | * to configure the pins for SCC2 use. | |
| 1200 | */ | |
| 1201 | #define PROFF_ENET PROFF_SCC2 | |
| 1202 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 1203 | #define SCC_ENET 1 | |
| 1204 | #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ | |
| 1205 | #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ | |
| 1206 | #define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ | |
| 1207 | #define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */ | |
| 1208 | ||
| 993cad93 WD |
1209 | #if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 |
| 1210 | # define PB_ENET_PDN ((ushort)0x4000) /* PB 17 */ | |
| 1211 | #elif CONFIG_NETVIA_VERSION >= 2 | |
| 1212 | # define PC_ENET_PDN ((ushort)0x0008) /* PC 12 */ | |
| 1213 | #endif | |
| 1214 | ||
| 608c9146 WD |
1215 | #define PB_ENET_TENA ((ushort)0x2000) /* PB 18 */ |
| 1216 | ||
| 1217 | #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ | |
| 1218 | #define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ | |
| 1219 | ||
| 1220 | /* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to | |
| 1221 | * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. | |
| 1222 | */ | |
| 1223 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 1224 | #define SICR_ENET_CLKRT ((uint)0x00002f00) | |
| 1225 | ||
| 1226 | #endif /* CONFIG_NETVIA */ | |
| 1227 | ||
| 3bbc899f WD |
1228 | /*** QS850/QS823 ***************************************************/ |
| 1229 | ||
| 1230 | #if defined(CONFIG_QS850) || defined(CONFIG_QS823) | |
| 1231 | #undef FEC_ENET /* Don't use FEC for EThernet */ | |
| 1232 | ||
| 1233 | #define PROFF_ENET PROFF_SCC2 | |
| 1234 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 1235 | #define SCC_ENET 1 | |
| 1236 | ||
| 1237 | #define PA_ENET_RXD ((ushort)0x0004) /* RXD on PA13 (Pin D9) */ | |
| 1238 | #define PA_ENET_TXD ((ushort)0x0008) /* TXD on PA12 (Pin D7) */ | |
| 1239 | #define PC_ENET_RENA ((ushort)0x0080) /* RENA on PC8 (Pin D12) */ | |
| 1240 | #define PC_ENET_CLSN ((ushort)0x0040) /* CLSN on PC9 (Pin C12) */ | |
| 1241 | #define PA_ENET_TCLK ((ushort)0x0200) /* TCLK on PA6 (Pin D8) */ | |
| 1242 | #define PA_ENET_RCLK ((ushort)0x0800) /* RCLK on PA4 (Pin D10) */ | |
| 1243 | #define PB_ENET_TENA ((uint)0x00002000) /* TENA on PB18 (Pin D11) */ | |
| 1244 | #define PC_ENET_LBK ((ushort)0x0010) /* Loopback control on PC11 (Pin B14) */ | |
| 1245 | #define PC_ENET_LI ((ushort)0x0020) /* Link Integrity control PC10 (A15) */ | |
| 1246 | #define PC_ENET_SQE ((ushort)0x0100) /* SQE Disable control PC7 (B15) */ | |
| 1247 | ||
| 1248 | /* SCC2 TXCLK from CLK2 | |
| 1249 | * SCC2 RXCLK from CLK4 | |
| 1250 | * SCC2 Connected to NMSI */ | |
| 1251 | #define SICR_ENET_MASK ((uint)0x00007F00) | |
| 1252 | #define SICR_ENET_CLKRT ((uint)0x00003D00) | |
| 1253 | ||
| 1254 | #endif /* CONFIG_QS850/QS823 */ | |
| 1255 | ||
| 1256 | /*** QS860T ***************************************************/ | |
| 1257 | ||
| 1258 | #ifdef CONFIG_QS860T | |
| 1259 | #ifdef CONFIG_FEC_ENET | |
| 1260 | #define FEC_ENET /* use FEC for EThernet */ | |
| 1261 | #endif /* CONFIG_FEC_ETHERNET */ | |
| 1262 | ||
| 1263 | /* This ENET stuff is for GTH 10 Mbit ( SCC ) */ | |
| 1264 | #define PROFF_ENET PROFF_SCC1 | |
| 1265 | #define CPM_CR_ENET CPM_CR_CH_SCC1 | |
| 1266 | #define SCC_ENET 0 | |
| 1267 | ||
| 1268 | #define PA_ENET_RXD ((ushort)0x0001) /* PA15 */ | |
| 1269 | #define PA_ENET_TXD ((ushort)0x0002) /* PA14 */ | |
| 1270 | #define PA_ENET_TCLK ((ushort)0x0800) /* PA4 */ | |
| 1271 | #define PA_ENET_RCLK ((ushort)0x0200) /* PA6 */ | |
| 1272 | #define PB_ENET_TENA ((uint)0x00001000) /* PB19 */ | |
| 1273 | #define PC_ENET_CLSN ((ushort)0x0010) /* PC11 */ | |
| 1274 | #define PC_ENET_RENA ((ushort)0x0020) /* PC10 */ | |
| 1275 | ||
| 1276 | #define SICR_ENET_MASK ((uint)0x000000ff) | |
| 1277 | /* RCLK PA4 -->CLK4, TCLK PA6 -->CLK2 */ | |
| 1278 | #define SICR_ENET_CLKRT ((uint)0x0000003D) | |
| 1279 | ||
| 1280 | #endif /* CONFIG_QS860T */ | |
| 1281 | ||
| fe8c2806 WD |
1282 | /*** RPXCLASSIC *****************************************************/ |
| 1283 | ||
| 1284 | #ifdef CONFIG_RPXCLASSIC | |
| 1285 | ||
| 1286 | #ifdef CONFIG_FEC_ENET | |
| 1287 | ||
| 1288 | # define FEC_ENET /* use FEC for EThernet */ | |
| 1289 | # undef SCC_ENET | |
| 1290 | ||
| 1291 | #else /* ! CONFIG_FEC_ENET */ | |
| 1292 | ||
| 1293 | /* Bits in parallel I/O port registers that have to be set/cleared | |
| 1294 | * to configure the pins for SCC1 use. | |
| 1295 | */ | |
| 1296 | #define PROFF_ENET PROFF_SCC1 | |
| 1297 | #define CPM_CR_ENET CPM_CR_CH_SCC1 | |
| 1298 | #define SCC_ENET 0 | |
| 1299 | #define PA_ENET_RXD ((ushort)0x0001) | |
| 1300 | #define PA_ENET_TXD ((ushort)0x0002) | |
| 1301 | #define PA_ENET_TCLK ((ushort)0x0200) | |
| 1302 | #define PA_ENET_RCLK ((ushort)0x0800) | |
| 1303 | #define PB_ENET_TENA ((uint)0x00001000) | |
| 1304 | #define PC_ENET_CLSN ((ushort)0x0010) | |
| 1305 | #define PC_ENET_RENA ((ushort)0x0020) | |
| 1306 | ||
| 1307 | /* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to | |
| 1308 | * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. | |
| 1309 | */ | |
| 1310 | #define SICR_ENET_MASK ((uint)0x000000ff) | |
| 1311 | #define SICR_ENET_CLKRT ((uint)0x0000003d) | |
| 1312 | ||
| 1313 | #endif /* CONFIG_FEC_ENET */ | |
| 1314 | ||
| 1315 | #endif /* CONFIG_RPXCLASSIC */ | |
| 1316 | ||
| 1317 | /*** RPXLITE ********************************************************/ | |
| 1318 | ||
| 1319 | #ifdef CONFIG_RPXLITE | |
| 1320 | /* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of | |
| 1321 | * this may be unique to the RPX-Lite configuration. | |
| 1322 | * Note TENA is on Port B. | |
| 1323 | */ | |
| 1324 | #define PROFF_ENET PROFF_SCC2 | |
| 1325 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 1326 | #define SCC_ENET 1 | |
| 1327 | #define PA_ENET_RXD ((ushort)0x0004) | |
| 1328 | #define PA_ENET_TXD ((ushort)0x0008) | |
| 1329 | #define PA_ENET_TCLK ((ushort)0x0200) | |
| 1330 | #define PA_ENET_RCLK ((ushort)0x0800) | |
| 73a8b27c WD |
1331 | #if defined(CONFIG_RMU) |
| 1332 | #define PC_ENET_TENA ((uint)0x00000002) /* PC14 */ | |
| 1333 | #else | |
| fe8c2806 | 1334 | #define PB_ENET_TENA ((uint)0x00002000) |
| 73a8b27c | 1335 | #endif |
| fe8c2806 WD |
1336 | #define PC_ENET_CLSN ((ushort)0x0040) |
| 1337 | #define PC_ENET_RENA ((ushort)0x0080) | |
| 1338 | ||
| 1339 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 1340 | #define SICR_ENET_CLKRT ((uint)0x00003d00) | |
| 1341 | #endif /* CONFIG_RPXLITE */ | |
| 1342 | ||
| 1343 | /*** SM850 *********************************************************/ | |
| 1344 | ||
| 1345 | /* The SM850 Service Module uses SCC2 for IrDA and SCC3 for Ethernet */ | |
| 1346 | ||
| 1347 | #ifdef CONFIG_SM850 | |
| 1348 | #define PROFF_ENET PROFF_SCC3 /* Ethernet on SCC3 */ | |
| 1349 | #define CPM_CR_ENET CPM_CR_CH_SCC3 | |
| 1350 | #define SCC_ENET 2 | |
| 1351 | #define PB_ENET_RXD ((uint)0x00000004) /* PB 29 */ | |
| 1352 | #define PB_ENET_TXD ((uint)0x00000002) /* PB 30 */ | |
| 1353 | #define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ | |
| 1354 | #define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ | |
| 1355 | ||
| 1356 | #define PC_ENET_LBK ((ushort)0x0008) /* PC 12 */ | |
| 1357 | #define PC_ENET_TENA ((ushort)0x0004) /* PC 13 */ | |
| 1358 | ||
| 1359 | #define PC_ENET_RENA ((ushort)0x0800) /* PC 4 */ | |
| 1360 | #define PC_ENET_CLSN ((ushort)0x0400) /* PC 5 */ | |
| 1361 | ||
| 1362 | /* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to | |
| 1363 | * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero. | |
| 1364 | */ | |
| 1365 | #define SICR_ENET_MASK ((uint)0x00FF0000) | |
| 1366 | #define SICR_ENET_CLKRT ((uint)0x00260000) | |
| 1367 | #endif /* CONFIG_SM850 */ | |
| 1368 | ||
| 1369 | /*** SPD823TS ******************************************************/ | |
| 1370 | ||
| 1371 | #ifdef CONFIG_SPD823TS | |
| 1372 | /* Bits in parallel I/O port registers that have to be set/cleared | |
| 1373 | * to configure the pins for SCC2 use. | |
| 1374 | */ | |
| 1375 | #define PROFF_ENET PROFF_SCC2 /* Ethernet on SCC2 */ | |
| 1376 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 1377 | #define SCC_ENET 1 | |
| 1378 | #define PA_ENET_MDC ((ushort)0x0001) /* PA 15 !!! */ | |
| 1379 | #define PA_ENET_MDIO ((ushort)0x0002) /* PA 14 !!! */ | |
| 1380 | #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ | |
| 1381 | #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ | |
| 1382 | #define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ | |
| 1383 | #define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ | |
| 1384 | ||
| 1385 | #define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ | |
| 1386 | ||
| 1387 | #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ | |
| 1388 | #define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ | |
| 1389 | #define PC_ENET_RESET ((ushort)0x0100) /* PC 7 !!! */ | |
| 1390 | ||
| 1391 | /* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to | |
| 1392 | * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. | |
| 1393 | */ | |
| 1394 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 1395 | #define SICR_ENET_CLKRT ((uint)0x00002E00) | |
| 1396 | #endif /* CONFIG_SPD823TS */ | |
| 1397 | ||
| 1398 | /*** SXNI855T ******************************************************/ | |
| 1399 | ||
| 1400 | #if defined(CONFIG_SXNI855T) | |
| 1401 | ||
| 1402 | #ifdef CONFIG_FEC_ENET | |
| 1403 | #define FEC_ENET /* use FEC for Ethernet */ | |
| 1404 | #endif /* CONFIG_FEC_ETHERNET */ | |
| 1405 | ||
| 1406 | #endif /* CONFIG_SXNI855T */ | |
| 1407 | ||
| 090eb735 | 1408 | /*** MVS1, TQM823L/M, TQM850L/M, TQM885D, ETX094, R360MPI **********/ |
| fe8c2806 WD |
1409 | |
| 1410 | #if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \ | |
| 71f95118 WD |
1411 | defined(CONFIG_R360MPI) || defined(CONFIG_RBC823) || \ |
| 1412 | defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \ | |
| 1413 | defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \ | |
| 090eb735 MK |
1414 | defined(CONFIG_TQM885D) || defined(CONFIG_ETX094) || \ |
| 1415 | defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)|| \ | |
| fe8c2806 | 1416 | (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2) |
| 090eb735 | 1417 | |
| fe8c2806 WD |
1418 | /* Bits in parallel I/O port registers that have to be set/cleared |
| 1419 | * to configure the pins for SCC2 use. | |
| 1420 | */ | |
| 1421 | #define PROFF_ENET PROFF_SCC2 | |
| 1422 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 1423 | #define SCC_ENET 1 | |
| 1424 | #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ | |
| 1425 | #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ | |
| 1426 | #define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ | |
| 1427 | #define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ | |
| 1428 | ||
| 1429 | #define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ | |
| 1430 | ||
| 1431 | #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ | |
| 1432 | #define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ | |
| 1433 | #if defined(CONFIG_R360MPI) | |
| 1434 | #define PC_ENET_LBK ((ushort)0x0008) /* PC 12 */ | |
| 1435 | #endif /* CONFIG_R360MPI */ | |
| 1436 | ||
| 1437 | /* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to | |
| 1438 | * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. | |
| 1439 | */ | |
| 1440 | #define SICR_ENET_MASK ((uint)0x0000ff00) | |
| 1441 | #define SICR_ENET_CLKRT ((uint)0x00002600) | |
| 090eb735 MK |
1442 | |
| 1443 | # ifdef CONFIG_FEC_ENET /* Use FEC for Fast Ethernet */ | |
| 1444 | #define FEC_ENET | |
| 1445 | # endif /* CONFIG_FEC_ENET */ | |
| 1446 | ||
| 71f95118 | 1447 | #endif /* CONFIG_MVS v1, CONFIG_TQM823L/M, CONFIG_TQM850L/M, etc. */ |
| fe8c2806 | 1448 | |
| d4ca31c4 | 1449 | /*** TQM855L/M, TQM860L/M, TQM862L/M, TQM866L/M *********************/ |
| fe8c2806 | 1450 | |
| 71f95118 WD |
1451 | #if defined(CONFIG_TQM855L) || defined(CONFIG_TQM855M) || \ |
| 1452 | defined(CONFIG_TQM860L) || defined(CONFIG_TQM860M) || \ | |
| d4ca31c4 WD |
1453 | defined(CONFIG_TQM862L) || defined(CONFIG_TQM862M) || \ |
| 1454 | defined(CONFIG_TQM866L) || defined(CONFIG_TQM866M) | |
| fe8c2806 WD |
1455 | |
| 1456 | # ifdef CONFIG_SCC1_ENET /* use SCC for 10Mbps Ethernet */ | |
| 1457 | ||
| 1458 | /* Bits in parallel I/O port registers that have to be set/cleared | |
| 1459 | * to configure the pins for SCC1 use. | |
| 1460 | */ | |
| 1461 | #define PROFF_ENET PROFF_SCC1 | |
| 1462 | #define CPM_CR_ENET CPM_CR_CH_SCC1 | |
| 1463 | #define SCC_ENET 0 | |
| 1464 | #define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */ | |
| 1465 | #define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */ | |
| 1466 | #define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ | |
| 1467 | #define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ | |
| 1468 | ||
| 1469 | #define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */ | |
| 1470 | #define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */ | |
| 1471 | #define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */ | |
| 1472 | ||
| 1473 | /* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to | |
| 1474 | * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. | |
| 1475 | */ | |
| 1476 | #define SICR_ENET_MASK ((uint)0x000000ff) | |
| 1477 | #define SICR_ENET_CLKRT ((uint)0x00000026) | |
| 1478 | ||
| 1479 | # endif /* CONFIG_SCC1_ENET */ | |
| 1480 | ||
| 1481 | # ifdef CONFIG_FEC_ENET /* Use FEC for Fast Ethernet */ | |
| 1482 | ||
| 1483 | #define FEC_ENET | |
| 1484 | ||
| 1485 | #define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ | |
| 1486 | #define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ | |
| 1487 | #define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ | |
| 1488 | #define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ | |
| 1489 | #define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ | |
| 1490 | #define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ | |
| 1491 | #define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ | |
| 1492 | #define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ | |
| 1493 | #define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ | |
| 1494 | #define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ | |
| 1495 | #define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ | |
| 1496 | #define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ | |
| 1497 | #define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ | |
| 1498 | ||
| 1499 | #define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ | |
| 1500 | ||
| 1501 | # endif /* CONFIG_FEC_ENET */ | |
| 71f95118 | 1502 | #endif /* CONFIG_TQM855L/M, TQM860L/M, TQM862L/M */ |
| fe8c2806 | 1503 | |
| 608c9146 WD |
1504 | /*** V37 **********************************************************/ |
| 1505 | ||
| 1506 | #ifdef CONFIG_V37 | |
| 1507 | /* This ENET stuff is for the MPC823 with ethernet on SCC2. Some of | |
| 1508 | * this may be unique to the Marel V37 configuration. | |
| 1509 | * Note TENA is on Port B. | |
| fe8c2806 WD |
1510 | */ |
| 1511 | #define PROFF_ENET PROFF_SCC2 | |
| 1512 | #define CPM_CR_ENET CPM_CR_CH_SCC2 | |
| 1513 | #define SCC_ENET 1 | |
| 608c9146 WD |
1514 | #define PA_ENET_RXD ((ushort)0x0004) |
| 1515 | #define PA_ENET_TXD ((ushort)0x0008) | |
| 1516 | #define PA_ENET_TCLK ((ushort)0x0400) | |
| 1517 | #define PA_ENET_RCLK ((ushort)0x0200) | |
| 1518 | #define PB_ENET_TENA ((uint)0x00002000) | |
| 1519 | #define PC_ENET_CLSN ((ushort)0x0040) | |
| 1520 | #define PC_ENET_RENA ((ushort)0x0080) | |
| fe8c2806 | 1521 | |
| fe8c2806 | 1522 | #define SICR_ENET_MASK ((uint)0x0000ff00) |
| 608c9146 WD |
1523 | #define SICR_ENET_CLKRT ((uint)0x00002e00) |
| 1524 | #endif /* CONFIG_V37 */ | |
| fe8c2806 | 1525 | |
| 3bbc899f | 1526 | |
| fe8c2806 WD |
1527 | /*********************************************************************/ |
| 1528 | ||
| 1529 | /* SCC Event register as used by Ethernet. | |
| 1530 | */ | |
| 1531 | #define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ | |
| 1532 | #define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ | |
| 1533 | #define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ | |
| 1534 | #define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ | |
| 1535 | #define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ | |
| 1536 | #define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ | |
| 1537 | ||
| 1538 | /* SCC Mode Register (PSMR) as used by Ethernet. | |
| 1539 | */ | |
| 1540 | #define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ | |
| 1541 | #define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ | |
| 1542 | #define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ | |
| 1543 | #define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ | |
| 1544 | #define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ | |
| 1545 | #define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ | |
| 1546 | #define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ | |
| 1547 | #define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ | |
| 1548 | #define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ | |
| 1549 | #define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ | |
| 1550 | #define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ | |
| 1551 | #define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ | |
| 1552 | #define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ | |
| 1553 | ||
| 1554 | /* Buffer descriptor control/status used by Ethernet receive. | |
| 1555 | */ | |
| 1556 | #define BD_ENET_RX_EMPTY ((ushort)0x8000) | |
| 1557 | #define BD_ENET_RX_WRAP ((ushort)0x2000) | |
| 1558 | #define BD_ENET_RX_INTR ((ushort)0x1000) | |
| 1559 | #define BD_ENET_RX_LAST ((ushort)0x0800) | |
| 1560 | #define BD_ENET_RX_FIRST ((ushort)0x0400) | |
| 1561 | #define BD_ENET_RX_MISS ((ushort)0x0100) | |
| 1562 | #define BD_ENET_RX_LG ((ushort)0x0020) | |
| 1563 | #define BD_ENET_RX_NO ((ushort)0x0010) | |
| 1564 | #define BD_ENET_RX_SH ((ushort)0x0008) | |
| 1565 | #define BD_ENET_RX_CR ((ushort)0x0004) | |
| 1566 | #define BD_ENET_RX_OV ((ushort)0x0002) | |
| 1567 | #define BD_ENET_RX_CL ((ushort)0x0001) | |
| 1568 | #define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ | |
| 1569 | ||
| 1570 | /* Buffer descriptor control/status used by Ethernet transmit. | |
| 1571 | */ | |
| 1572 | #define BD_ENET_TX_READY ((ushort)0x8000) | |
| 1573 | #define BD_ENET_TX_PAD ((ushort)0x4000) | |
| 1574 | #define BD_ENET_TX_WRAP ((ushort)0x2000) | |
| 1575 | #define BD_ENET_TX_INTR ((ushort)0x1000) | |
| 1576 | #define BD_ENET_TX_LAST ((ushort)0x0800) | |
| 1577 | #define BD_ENET_TX_TC ((ushort)0x0400) | |
| 1578 | #define BD_ENET_TX_DEF ((ushort)0x0200) | |
| 1579 | #define BD_ENET_TX_HB ((ushort)0x0100) | |
| 1580 | #define BD_ENET_TX_LC ((ushort)0x0080) | |
| 1581 | #define BD_ENET_TX_RL ((ushort)0x0040) | |
| 1582 | #define BD_ENET_TX_RCMASK ((ushort)0x003c) | |
| 1583 | #define BD_ENET_TX_UN ((ushort)0x0002) | |
| 1584 | #define BD_ENET_TX_CSL ((ushort)0x0001) | |
| 1585 | #define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ | |
| 1586 | ||
| 1587 | /* SCC as UART | |
| 1588 | */ | |
| 1589 | typedef struct scc_uart { | |
| 1590 | sccp_t scc_genscc; | |
| 1591 | uint scc_res1; /* Reserved */ | |
| 1592 | uint scc_res2; /* Reserved */ | |
| 1593 | ushort scc_maxidl; /* Maximum idle chars */ | |
| 1594 | ushort scc_idlc; /* temp idle counter */ | |
| 1595 | ushort scc_brkcr; /* Break count register */ | |
| 1596 | ushort scc_parec; /* receive parity error counter */ | |
| 1597 | ushort scc_frmec; /* receive framing error counter */ | |
| 1598 | ushort scc_nosec; /* receive noise counter */ | |
| 1599 | ushort scc_brkec; /* receive break condition counter */ | |
| 1600 | ushort scc_brkln; /* last received break length */ | |
| 1601 | ushort scc_uaddr1; /* UART address character 1 */ | |
| 1602 | ushort scc_uaddr2; /* UART address character 2 */ | |
| 1603 | ushort scc_rtemp; /* Temp storage */ | |
| 1604 | ushort scc_toseq; /* Transmit out of sequence char */ | |
| 1605 | ushort scc_char1; /* control character 1 */ | |
| 1606 | ushort scc_char2; /* control character 2 */ | |
| 1607 | ushort scc_char3; /* control character 3 */ | |
| 1608 | ushort scc_char4; /* control character 4 */ | |
| 1609 | ushort scc_char5; /* control character 5 */ | |
| 1610 | ushort scc_char6; /* control character 6 */ | |
| 1611 | ushort scc_char7; /* control character 7 */ | |
| 1612 | ushort scc_char8; /* control character 8 */ | |
| 1613 | ushort scc_rccm; /* receive control character mask */ | |
| 1614 | ushort scc_rccr; /* receive control character register */ | |
| 1615 | ushort scc_rlbc; /* receive last break character */ | |
| 1616 | } scc_uart_t; | |
| 1617 | ||
| 1618 | /* SCC Event and Mask registers when it is used as a UART. | |
| 1619 | */ | |
| 1620 | #define UART_SCCM_GLR ((ushort)0x1000) | |
| 1621 | #define UART_SCCM_GLT ((ushort)0x0800) | |
| 1622 | #define UART_SCCM_AB ((ushort)0x0200) | |
| 1623 | #define UART_SCCM_IDL ((ushort)0x0100) | |
| 1624 | #define UART_SCCM_GRA ((ushort)0x0080) | |
| 1625 | #define UART_SCCM_BRKE ((ushort)0x0040) | |
| 1626 | #define UART_SCCM_BRKS ((ushort)0x0020) | |
| 1627 | #define UART_SCCM_CCR ((ushort)0x0008) | |
| 1628 | #define UART_SCCM_BSY ((ushort)0x0004) | |
| 1629 | #define UART_SCCM_TX ((ushort)0x0002) | |
| 1630 | #define UART_SCCM_RX ((ushort)0x0001) | |
| 1631 | ||
| 1632 | /* The SCC PSMR when used as a UART. | |
| 1633 | */ | |
| 1634 | #define SCU_PSMR_FLC ((ushort)0x8000) | |
| 1635 | #define SCU_PSMR_SL ((ushort)0x4000) | |
| 1636 | #define SCU_PSMR_CL ((ushort)0x3000) | |
| 1637 | #define SCU_PSMR_UM ((ushort)0x0c00) | |
| 1638 | #define SCU_PSMR_FRZ ((ushort)0x0200) | |
| 1639 | #define SCU_PSMR_RZS ((ushort)0x0100) | |
| 1640 | #define SCU_PSMR_SYN ((ushort)0x0080) | |
| 1641 | #define SCU_PSMR_DRT ((ushort)0x0040) | |
| 1642 | #define SCU_PSMR_PEN ((ushort)0x0010) | |
| 1643 | #define SCU_PSMR_RPM ((ushort)0x000c) | |
| 1644 | #define SCU_PSMR_REVP ((ushort)0x0008) | |
| 1645 | #define SCU_PSMR_TPM ((ushort)0x0003) | |
| 1646 | #define SCU_PSMR_TEVP ((ushort)0x0003) | |
| 1647 | ||
| 1648 | /* CPM Transparent mode SCC. | |
| 1649 | */ | |
| 1650 | typedef struct scc_trans { | |
| 1651 | sccp_t st_genscc; | |
| 1652 | uint st_cpres; /* Preset CRC */ | |
| 1653 | uint st_cmask; /* Constant mask for CRC */ | |
| 1654 | } scc_trans_t; | |
| 1655 | ||
| 1656 | #define BD_SCC_TX_LAST ((ushort)0x0800) | |
| 1657 | ||
| 1658 | /* IIC parameter RAM. | |
| 1659 | */ | |
| 1660 | typedef struct iic { | |
| 1661 | ushort iic_rbase; /* Rx Buffer descriptor base address */ | |
| 1662 | ushort iic_tbase; /* Tx Buffer descriptor base address */ | |
| 1663 | u_char iic_rfcr; /* Rx function code */ | |
| 1664 | u_char iic_tfcr; /* Tx function code */ | |
| 1665 | ushort iic_mrblr; /* Max receive buffer length */ | |
| 1666 | uint iic_rstate; /* Internal */ | |
| 1667 | uint iic_rdp; /* Internal */ | |
| 1668 | ushort iic_rbptr; /* Internal */ | |
| 1669 | ushort iic_rbc; /* Internal */ | |
| 1670 | uint iic_rxtmp; /* Internal */ | |
| 1671 | uint iic_tstate; /* Internal */ | |
| 1672 | uint iic_tdp; /* Internal */ | |
| 1673 | ushort iic_tbptr; /* Internal */ | |
| 1674 | ushort iic_tbc; /* Internal */ | |
| 1675 | uint iic_txtmp; /* Internal */ | |
| 1676 | uint iic_res; /* reserved */ | |
| 1677 | ushort iic_rpbase; /* Relocation pointer */ | |
| 1678 | ushort iic_res2; /* reserved */ | |
| 1679 | } iic_t; | |
| 1680 | ||
| 1681 | /* SPI parameter RAM. | |
| 1682 | */ | |
| 1683 | typedef struct spi { | |
| 1684 | ushort spi_rbase; /* Rx Buffer descriptor base address */ | |
| 1685 | ushort spi_tbase; /* Tx Buffer descriptor base address */ | |
| 1686 | u_char spi_rfcr; /* Rx function code */ | |
| 1687 | u_char spi_tfcr; /* Tx function code */ | |
| 1688 | ushort spi_mrblr; /* Max receive buffer length */ | |
| 1689 | uint spi_rstate; /* Internal */ | |
| 1690 | uint spi_rdp; /* Internal */ | |
| 1691 | ushort spi_rbptr; /* Internal */ | |
| 1692 | ushort spi_rbc; /* Internal */ | |
| 1693 | uint spi_rxtmp; /* Internal */ | |
| 1694 | uint spi_tstate; /* Internal */ | |
| 1695 | uint spi_tdp; /* Internal */ | |
| 1696 | ushort spi_tbptr; /* Internal */ | |
| 1697 | ushort spi_tbc; /* Internal */ | |
| 1698 | uint spi_txtmp; /* Internal */ | |
| 1699 | uint spi_res; | |
| 1700 | ushort spi_rpbase; /* Relocation pointer */ | |
| 1701 | ushort spi_res2; | |
| 1702 | } spi_t; | |
| 1703 | ||
| 1704 | /* SPI Mode register. | |
| 1705 | */ | |
| 1706 | #define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ | |
| 1707 | #define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ | |
| 1708 | #define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ | |
| 1709 | #define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ | |
| 1710 | #define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ | |
| 1711 | #define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ | |
| 1712 | #define SPMODE_EN ((ushort)0x0100) /* Enable */ | |
| 1713 | #define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ | |
| 1714 | #define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ | |
| 1715 | ||
| 1716 | #define SPMODE_LEN(x) ((((x)-1)&0xF)<<4) | |
| 1717 | #define SPMODE_PM(x) ((x) &0xF) | |
| 1718 | ||
| 1719 | /* HDLC parameter RAM. | |
| 1720 | */ | |
| 1721 | ||
| 1722 | typedef struct hdlc_pram_s { | |
| 1723 | /* | |
| 1724 | * SCC parameter RAM | |
| 1725 | */ | |
| 1726 | ushort rbase; /* Rx Buffer descriptor base address */ | |
| 1727 | ushort tbase; /* Tx Buffer descriptor base address */ | |
| 1728 | uchar rfcr; /* Rx function code */ | |
| 1729 | uchar tfcr; /* Tx function code */ | |
| 1730 | ushort mrblr; /* Rx buffer length */ | |
| 1731 | ulong rstate; /* Rx internal state */ | |
| 1732 | ulong rptr; /* Rx internal data pointer */ | |
| 1733 | ushort rbptr; /* rb BD Pointer */ | |
| 1734 | ushort rcount; /* Rx internal byte count */ | |
| 1735 | ulong rtemp; /* Rx temp */ | |
| 1736 | ulong tstate; /* Tx internal state */ | |
| 1737 | ulong tptr; /* Tx internal data pointer */ | |
| 1738 | ushort tbptr; /* Tx BD pointer */ | |
| 1739 | ushort tcount; /* Tx byte count */ | |
| 1740 | ulong ttemp; /* Tx temp */ | |
| 1741 | ulong rcrc; /* temp receive CRC */ | |
| 1742 | ulong tcrc; /* temp transmit CRC */ | |
| 1743 | /* | |
| 1744 | * HDLC specific parameter RAM | |
| 1745 | */ | |
| 1746 | uchar res[4]; /* reserved */ | |
| 1747 | ulong c_mask; /* CRC constant */ | |
| 1748 | ulong c_pres; /* CRC preset */ | |
| 1749 | ushort disfc; /* discarded frame counter */ | |
| 1750 | ushort crcec; /* CRC error counter */ | |
| 1751 | ushort abtsc; /* abort sequence counter */ | |
| 1752 | ushort nmarc; /* nonmatching address rx cnt */ | |
| 1753 | ushort retrc; /* frame retransmission cnt */ | |
| 1754 | ushort mflr; /* maximum frame length reg */ | |
| 1755 | ushort max_cnt; /* maximum length counter */ | |
| 1756 | ushort rfthr; /* received frames threshold */ | |
| 1757 | ushort rfcnt; /* received frames count */ | |
| 1758 | ushort hmask; /* user defined frm addr mask */ | |
| 1759 | ushort haddr1; /* user defined frm address 1 */ | |
| 1760 | ushort haddr2; /* user defined frm address 2 */ | |
| 1761 | ushort haddr3; /* user defined frm address 3 */ | |
| 1762 | ushort haddr4; /* user defined frm address 4 */ | |
| 1763 | ushort tmp; /* temp */ | |
| 1764 | ushort tmp_mb; /* temp */ | |
| 1765 | } hdlc_pram_t; | |
| 1766 | ||
| 1767 | /* CPM interrupts. There are nearly 32 interrupts generated by CPM | |
| 1768 | * channels or devices. All of these are presented to the PPC core | |
| 1769 | * as a single interrupt. The CPM interrupt handler dispatches its | |
| 1770 | * own handlers, in a similar fashion to the PPC core handler. We | |
| 1771 | * use the table as defined in the manuals (i.e. no special high | |
| 1772 | * priority and SCC1 == SCCa, etc...). | |
| 1773 | */ | |
| 1774 | #define CPMVEC_NR 32 | |
| 7c7a23bd WD |
1775 | #define CPMVEC_OFFSET 0x00010000 |
| 1776 | #define CPMVEC_PIO_PC15 ((ushort)0x1f | CPMVEC_OFFSET) | |
| 1777 | #define CPMVEC_SCC1 ((ushort)0x1e | CPMVEC_OFFSET) | |
| 1778 | #define CPMVEC_SCC2 ((ushort)0x1d | CPMVEC_OFFSET) | |
| 1779 | #define CPMVEC_SCC3 ((ushort)0x1c | CPMVEC_OFFSET) | |
| 1780 | #define CPMVEC_SCC4 ((ushort)0x1b | CPMVEC_OFFSET) | |
| 1781 | #define CPMVEC_PIO_PC14 ((ushort)0x1a | CPMVEC_OFFSET) | |
| 1782 | #define CPMVEC_TIMER1 ((ushort)0x19 | CPMVEC_OFFSET) | |
| 1783 | #define CPMVEC_PIO_PC13 ((ushort)0x18 | CPMVEC_OFFSET) | |
| 1784 | #define CPMVEC_PIO_PC12 ((ushort)0x17 | CPMVEC_OFFSET) | |
| 1785 | #define CPMVEC_SDMA_CB_ERR ((ushort)0x16 | CPMVEC_OFFSET) | |
| 1786 | #define CPMVEC_IDMA1 ((ushort)0x15 | CPMVEC_OFFSET) | |
| 1787 | #define CPMVEC_IDMA2 ((ushort)0x14 | CPMVEC_OFFSET) | |
| 1788 | #define CPMVEC_TIMER2 ((ushort)0x12 | CPMVEC_OFFSET) | |
| 1789 | #define CPMVEC_RISCTIMER ((ushort)0x11 | CPMVEC_OFFSET) | |
| 1790 | #define CPMVEC_I2C ((ushort)0x10 | CPMVEC_OFFSET) | |
| 1791 | #define CPMVEC_PIO_PC11 ((ushort)0x0f | CPMVEC_OFFSET) | |
| 1792 | #define CPMVEC_PIO_PC10 ((ushort)0x0e | CPMVEC_OFFSET) | |
| 1793 | #define CPMVEC_TIMER3 ((ushort)0x0c | CPMVEC_OFFSET) | |
| 1794 | #define CPMVEC_PIO_PC9 ((ushort)0x0b | CPMVEC_OFFSET) | |
| 1795 | #define CPMVEC_PIO_PC8 ((ushort)0x0a | CPMVEC_OFFSET) | |
| 1796 | #define CPMVEC_PIO_PC7 ((ushort)0x09 | CPMVEC_OFFSET) | |
| 1797 | #define CPMVEC_TIMER4 ((ushort)0x07 | CPMVEC_OFFSET) | |
| 1798 | #define CPMVEC_PIO_PC6 ((ushort)0x06 | CPMVEC_OFFSET) | |
| 1799 | #define CPMVEC_SPI ((ushort)0x05 | CPMVEC_OFFSET) | |
| 1800 | #define CPMVEC_SMC1 ((ushort)0x04 | CPMVEC_OFFSET) | |
| 1801 | #define CPMVEC_SMC2 ((ushort)0x03 | CPMVEC_OFFSET) | |
| 1802 | #define CPMVEC_PIO_PC5 ((ushort)0x02 | CPMVEC_OFFSET) | |
| 1803 | #define CPMVEC_PIO_PC4 ((ushort)0x01 | CPMVEC_OFFSET) | |
| 1804 | #define CPMVEC_ERROR ((ushort)0x00 | CPMVEC_OFFSET) | |
| fe8c2806 WD |
1805 | |
| 1806 | extern void irq_install_handler(int vec, void (*handler)(void *), void *dev_id); | |
| 1807 | ||
| 1808 | /* CPM interrupt configuration vector. | |
| 1809 | */ | |
| 1810 | #define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ | |
| 1811 | #define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ | |
| 1812 | #define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ | |
| 1813 | #define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ | |
| 1814 | #define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */ | |
| 1815 | #define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ | |
| 1816 | #define CICR_IEN ((uint)0x00000080) /* Int. enable */ | |
| 1817 | #define CICR_SPS ((uint)0x00000001) /* SCC Spread */ | |
| 1818 | #endif /* __CPM_8XX__ */ |