[thirdparty/u-boot.git] / include / configs / 10m50_devboard.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
 * Scott McNutt <smcnutt@psyent.com>
 * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * BOARD/CPU
 */

/*
 * SERIAL
 */
#define CONFIG_SYS_NS16550_MEM32

/*
 * Flash
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	1024

/*
 * NET options
 */
#define CONFIG_SYS_RX_ETH_BUFFER	0
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE

/*
 * FDT options
 */
#define CONFIG_LMB

/*
 * MEMORY ORGANIZATION
 * -Monitor at top of sdram.
 * -The heap is placed below the monitor
 * -The stack is placed below the heap (&grows down).
 */
#define CONFIG_SYS_SDRAM_BASE		0xc8000000
#define CONFIG_SYS_SDRAM_SIZE		0x08000000
#define CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_SYS_MONITOR_LEN		0x80000	/* Reserve 512k */
#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + \
					 CONFIG_SYS_SDRAM_SIZE - \
					 CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_MALLOC_LEN		0x20000

/*
 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
 * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
 * reset address, no? This will keep the environment in user region
 * of flash. NOTE: the monitor length must be multiple of sector size
 * (which is common practice).
 */

#define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/

/*
 * MISC
 */
#define CONFIG_SYS_LOAD_ADDR		0xcc000000	/* Half of RAM */
#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR

#endif /* __CONFIG_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
5c0f9822 TC	2	/*
	3	* (C) Copyright 2005, Psyent Corporation <www.psyent.com>
	4	* Scott McNutt <smcnutt@psyent.com>
	5	* (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
5c0f9822 TC	6	*/
	7
	8	#ifndef __CONFIG_H
	9	#define __CONFIG_H
	10
	11	/*
	12	* BOARD/CPU
	13	*/
5c0f9822 TC	14
	15	/*
	16	* SERIAL
	17	*/
2f3a5fee	18	#define CONFIG_SYS_NS16550_MEM32
5c0f9822 TC	19
	20	/*
	21	* Flash
	22	*/
	23	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	24	#define CONFIG_SYS_MAX_FLASH_SECT 1024
5c0f9822 TC	25
	26	/*
	27	* NET options
	28	*/
	29	#define CONFIG_SYS_RX_ETH_BUFFER 0
5c0f9822	30	#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
5c0f9822 TC	31
	32	/*
	33	* BOOTP options
	34	*/
	35	#define CONFIG_BOOTP_BOOTFILESIZE
5c0f9822 TC	36
	37	/*
	38	* FDT options
	39	*/
5c0f9822 TC	40	#define CONFIG_LMB
5c0f9822 TC	41
5c0f9822 TC	42	/*
	43	* MEMORY ORGANIZATION
	44	* -Monitor at top of sdram.
	45	* -The heap is placed below the monitor
	46	* -The stack is placed below the heap (&grows down).
	47	*/
	48	#define CONFIG_SYS_SDRAM_BASE 0xc8000000
	49	#define CONFIG_SYS_SDRAM_SIZE 0x08000000
5c0f9822	50	#define CONFIG_MONITOR_IS_IN_RAM
7ef051ec	51	#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */
5c0f9822 TC	52	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
	53	CONFIG_SYS_SDRAM_SIZE - \
	54	CONFIG_SYS_MONITOR_LEN)
	55	#define CONFIG_SYS_MALLOC_LEN 0x20000
	56
2aee06a2 MV	57	/*
	58	* ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
	59	* CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
	60	* reset address, no? This will keep the environment in user region
	61	* of flash. NOTE: the monitor length must be multiple of sector size
	62	* (which is common practice).
	63	*/
2aee06a2	64
2aee06a2	65	#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
2aee06a2	66
5c0f9822 TC	67	/*
	68	* MISC
	69	*/
bc3abe14 MV	70	#define CONFIG_SYS_LOAD_ADDR 0xcc000000 /* Half of RAM */
bc3abe14 MV	71	#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
5c0f9822 TC	72
5c0f9822 TC	73	#endif /* __CONFIG_H */