[people/ms/u-boot.git] / include / configs / ATUM8548.h

/*
 * Copyright 2007
 * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com
 *
 * Copyright 2004, 2007 Freescale Semiconductor.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * atum8548 board configuration file
 *
 * Please refer to doc/README.atum8548 for more info.
 *
 */
#ifndef __CONFIG_H
#define __CONFIG_H

/* Debug Options, Disable in production
#define ET_DEBUG		1
#define CONFIG_PANIC_HANG	1
#define DEBUG			1
*/

/* CPLD Configuration Options */
#define MPC85xx_ATUM_CLKOCR            0x80000002

/* High Level Configuration Options */
#define CONFIG_BOOKE		1	/* BOOKE */
#define CONFIG_E500		1	/* BOOKE e500 family */
#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
#define CONFIG_MPC8548		1	/* MPC8548 specific */

#define CONFIG_PCI		1	/* enable any pci type devices */
#define CONFIG_PCI1		1	/* PCI controller 1 */
#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
#define CONFIG_PCI2             1	/* PCI controller 2 */
#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */

#define CONFIG_TSEC_ENET	1	/* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for DDR setup*/
#undef CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */

#define CONFIG_DDR_ECC			/* only for ECC DDR module */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */

#define CONFIG_FSL_LAW		1	/* Use common FSL init code */

#define MPC85xx_DDR_SDRAM_CLK_CNTL	/* 85xx has clock control reg */

#define CONFIG_SYS_CLK_FREQ	33000000

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE			/* toggle L2 cache */
#define CONFIG_BTB			/* toggle branch predition */
#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
#define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */

/*
 * Only possible on E500 Version 2 or newer cores.
 */
#define CONFIG_ENABLE_36BIT_PHYS	1

#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */

#define CONFIG_CMD_SDRAM		1	/* SDRAM DIMM SPD info printout */
#define CONFIG_ENABLE_36BIT_PHYS	1
#undef	CFG_DRAM_TEST
#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
#define CFG_MEMTEST_END		0x00400000

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */

#define PCI_SPEED		33333000        /* CPLD currenlty does not have PCI setup info */
#define CFG_PCI1_ADDR	(CFG_CCSRBAR+0x8000)
#define CFG_PCI2_ADDR	(CFG_CCSRBAR+0x9000)
#define CFG_PCIE1_ADDR	(CFG_CCSRBAR+0xa000)

/*
 * DDR Setup
 */
#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE

#if defined(CONFIG_SPD_EEPROM)
    /*
     * Determine DDR configuration from I2C interface.
     */
    #define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */

#else
    /*
     * Manually set up DDR parameters
     */
    #define CFG_SDRAM_SIZE	1024		/* DDR is 1024MB */
    #define CFG_DDR_CS0_BNDS	0x0000000f	/* 0-1024 */
    #define CFG_DDR_CS0_CONFIG	0x80000102
    #define CFG_DDR_TIMING_0	0x00260802
    #define CFG_DDR_TIMING_1	0x38355322
    #define CFG_DDR_TIMING_2	0x039048c7
    #define CFG_DDR_CONTROL	0xc2000000	/* unbuffered,no DYN_PWR */
    #define CFG_DDR_MODE	0x00000432
    #define CFG_DDR_INTERVAL	0x05150100
    #define DDR_SDRAM_CFG	0x43000000
#endif

#undef CONFIG_CLOCKS_IN_MHZ

/*
 * Local Bus Definitions
 */

/*
 * FLASH on the Local Bus
 * based on flash chip S29GL01GP
 * One bank, 128M, using the CFI driver.
 * Boot from BR0 bank at 0xf800_0000
 *
 * BR0:
 *    Base address 0 = 0xF8000000 = BR0[0:16] = 1111 1000 0000 0000 0
 *    Port Size = 16 bits = BRx[19:20] = 10
 *    Use GPCM = BRx[24:26] = 000
 *    Valid = BRx[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1000 0000 0000 0001 0000 0000 0001 = f8001001    BR0
 *
 * OR0:
 *    Addr Mask = 128M = ORx[0:16] = 1111 1000 0000 0000 0
 *    Reserved ORx[17:18] = 00
 *    CSNT = ORx[20] = 1
 *    ACS = half cycle delay = ORx[21:22] = 11
 *    SCY = 6 = ORx[24:27] = 0110
 *    TRLX = use relaxed timing = ORx[29] = 1
 *    EAD = use external address latch delay = OR[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1000 0000 0000 0000 1110 0110 0101 = f8000E65    ORx
 */

#define CFG_BOOT_BLOCK		0xf8000000	/* boot TLB block */
#define CFG_FLASH_BASE		CFG_BOOT_BLOCK	/* start of FLASH 128M */

#define CFG_BR0_PRELIM		0xf8001001

#define	CFG_OR0_PRELIM		0xf8000E65

#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
#define CFG_MAX_FLASH_SECT	1024		/* sectors per device */
#undef	CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT	512000	/* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT	8000	/* Flash Write Timeout (ms) */


#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */

#define CFG_FLASH_CFI_DRIVER    1
#define CFG_FLASH_CFI           1
#define CFG_FLASH_EMPTY_INFO

/*
 * Flash on the LocalBus
 */
#define CFG_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable	 */

/* Memory */
#define CFG_INIT_RAM_LOCK	1
#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */

#define CFG_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */

#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */

/* Serial Port */
#define CONFIG_CONS_INDEX	1
#undef	CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE	1
#define CFG_NS16550_CLK		get_bus_freq(0)

#define CFG_BAUDRATE_TABLE \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}

#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)

/* Use the HUSH parser */
#define CFG_HUSH_PARSER
#ifdef	CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT		1
#define CONFIG_OF_BOARD_SETUP		1

/*
 * I2C
 */
#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
#define CONFIG_HARD_I2C		/* I2C with hardware support*/
#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
#define CFG_I2C_EEPROM_ADDR	0x57
#define CFG_I2C_SLAVE		0x7F
#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
#define CFG_I2C_OFFSET		0x3000

/*
 * General PCI
 * Memory space is mapped 1-1, but I/O space must start from 0.
 */
#define CFG_PCI_PHYS		0x80000000	/* 1G PCI TLB */

#define CFG_PCI1_MEM_BASE	0x80000000
#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
#define CFG_PCI1_IO_BASE	0x00000000
#define CFG_PCI1_IO_PHYS	0xe2000000
#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */

#ifdef CONFIG_PCI2
#define CFG_PCI2_MEM_BASE	0xC0000000
#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
#define CFG_PCI2_IO_BASE	0x00000000
#define CFG_PCI2_IO_PHYS	0xe2800000
#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
#endif

#ifdef CONFIG_PCIE1
#define CFG_PCIE1_MEM_BASE	0xa0000000
#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
#define CFG_PCIE1_IO_BASE	0x00000000
#define CFG_PCIE1_IO_PHYS	0xe3000000
#define CFG_PCIE1_IO_SIZE	0x00100000	/*   1M */
#endif


#if !defined(CONFIG_PCI_PNP)
    #define PCI_ENET0_IOADDR	0xe0000000
    #define PCI_ENET0_MEMADDR	0xe0000000
    #define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
#endif

#if defined(CONFIG_PCI)

#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP			/* do pci plug-and-play */

#undef CONFIG_EEPRO100
#undef CONFIG_TULIP

#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */

/* PCI view of System Memory */
#define CFG_PCI_MEMORY_BUS	0x00000000
#define CFG_PCI_MEMORY_PHYS	0x00000000
#define CFG_PCI_MEMORY_SIZE	0x80000000

#endif	/* CONFIG_PCI */

#if defined(CONFIG_TSEC_ENET)

#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI	1
#endif

#define CONFIG_MII		1	/* MII PHY management */
#define CONFIG_TSEC1	1
#define CONFIG_TSEC1_NAME	"eTSEC0"
#define CONFIG_TSEC2	1
#define CONFIG_TSEC2_NAME	"eTSEC1"
#define CONFIG_TSEC3	1
#define CONFIG_TSEC3_NAME	"eTSEC2"
#define CONFIG_TSEC4	1
#define CONFIG_TSEC4_NAME	"eTSEC3"
#undef CONFIG_MPC85XX_FEC

#define TSEC1_PHY_ADDR		0
#define TSEC2_PHY_ADDR		1
#define TSEC3_PHY_ADDR		2
#define TSEC4_PHY_ADDR		3

#define TSEC1_PHYIDX		0
#define TSEC2_PHYIDX		0
#define TSEC3_PHYIDX		0
#define TSEC4_PHYIDX		0
#define TSEC1_FLAGS		TSEC_GIGABIT
#define TSEC2_FLAGS		TSEC_GIGABIT
#define TSEC3_FLAGS		TSEC_GIGABIT
#define TSEC4_FLAGS		TSEC_GIGABIT

/* Options are: eTSEC[0-3] */
#define CONFIG_ETHPRIME		"eTSEC2"
#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
#endif	/* CONFIG_TSEC_ENET */

/*
 * Environment
 */
#define CFG_ENV_IS_IN_FLASH	1
#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
#define CFG_ENV_SIZE		0x2000

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII

#if defined(CONFIG_PCI)
    #define CONFIG_CMD_PCI
#endif


#undef CONFIG_WATCHDOG			/* watchdog disabled */

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP			/* undef to save memory	*/
#define CFG_LOAD_ADDR	0x2000000	/* default load address */
#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
#else
#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS	16		/* max number of command args */
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM	0x02		/* Software reboot */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

/*
 * Environment Configuration
 */

/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_HAS_ETH0
#define CONFIG_ETHADDR	 00:E0:0C:00:00:FD
#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR	 00:E0:0C:00:01:FD
#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR	 00:E0:0C:00:02:FD
#define CONFIG_HAS_ETH3
#define CONFIG_ETH3ADDR	 00:E0:0C:00:03:FD
#endif

#define CONFIG_IPADDR	 10.101.43.142

#define CONFIG_HOSTNAME	 atum
#define CONFIG_ROOTPATH	 /nfsroot
#define CONFIG_BOOTFILE	 /tftpboot/uImage.atum
#define CONFIG_UBOOTPATH	/tftpboot/uboot.bin	/* TFTP server */

#define CONFIG_SERVERIP	 10.101.43.10
#define CONFIG_GATEWAYIP 10.101.45.1
#define CONFIG_NETMASK	 255.255.248.0

#define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/

#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs*/

#define CONFIG_BAUDRATE	115200

#define CONFIG_NFSBOOTCOMMAND						\
   "setenv bootargs root=/dev/nfs rw "					\
      "nfsroot=$serverip:$rootpath "					\
      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
      "console=$consoledev,$baudrate $othbootargs;"	                \
   "tftp $loadaddr $bootfile;"						\
   "tftp $dtbaddr $dtbfile;"						\
   "bootm $loadaddr - $dtbaddr"


#define CONFIG_RAMBOOTCOMMAND \
   "setenv bootargs root=/dev/ram rw "					\
      "console=$consoledev,$baudrate $othbootargs;"			\
   "tftp $ramdiskaddr $ramdiskfile;"					\
   "tftp $loadaddr $bootfile;"						\
   "tftp $dtbaddr $dtbfile;"						\
   "bootm $loadaddr $ramdiskaddr $dtbaddr"

#define CONFIG_BOOTCOMMAND	CONFIG_NFSBOOTCOMMAND

#endif	/* __CONFIG_H */
Commit	Line	Data
7bd6104b	1	/*
	2	* Copyright 2007
	3	* Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com
	4	*
	5	* Copyright 2004, 2007 Freescale Semiconductor.
	6	*
	7	* See file CREDITS for list of people who contributed to this
	8	* project.
	9	*
	10	* This program is free software; you can redistribute it and/or
	11	* modify it under the terms of the GNU General Public License as
	12	* published by the Free Software Foundation; either version 2 of
	13	* the License, or (at your option) any later version.
	14	*
	15	* This program is distributed in the hope that it will be useful,
	16	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	17	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	18	* GNU General Public License for more details.
	19	*
	20	* You should have received a copy of the GNU General Public License
	21	* along with this program; if not, write to the Free Software
	22	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	23	* MA 02111-1307 USA
	24	*/
	25
	26	/*
	27	* atum8548 board configuration file
	28	*
	29	* Please refer to doc/README.atum8548 for more info.
	30	*
	31	*/
	32	#ifndef __CONFIG_H
	33	#define __CONFIG_H
	34
	35	/* Debug Options, Disable in production
	36	#define ET_DEBUG 1
	37	#define CONFIG_PANIC_HANG 1
	38	#define DEBUG 1
	39	*/
	40
	41	/* CPLD Configuration Options */
	42	#define MPC85xx_ATUM_CLKOCR 0x80000002
	43
	44	/* High Level Configuration Options */
	45	#define CONFIG_BOOKE 1 /* BOOKE */
	46	#define CONFIG_E500 1 /* BOOKE e500 family */
	47	#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
	48	#define CONFIG_MPC8548 1 /* MPC8548 specific */
	49
	50	#define CONFIG_PCI 1 /* enable any pci type devices */
	51	#define CONFIG_PCI1 1 /* PCI controller 1 */
	52	#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
	53	#define CONFIG_PCI2 1 /* PCI controller 2 */
	54	#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
	55
	56	#define CONFIG_TSEC_ENET 1 /* tsec ethernet support */
	57	#define CONFIG_ENV_OVERWRITE
53677ef1	58	#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for DDR setup*/
7bd6104b	59	#undef CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
	60
	61	#define CONFIG_DDR_ECC /* only for ECC DDR module */
	62	#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
	63	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
	64	#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
	65
4d3521cc KG	66	#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
4d3521cc KG	67
7bd6104b	68	#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
	69
	70	#define CONFIG_SYS_CLK_FREQ 33000000
	71
	72	/*
	73	* These can be toggled for performance analysis, otherwise use default.
	74	*/
	75	#define CONFIG_L2_CACHE /* toggle L2 cache */
	76	#define CONFIG_BTB /* toggle branch predition */
	77	#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
	78	#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
	79
	80	/*
	81	* Only possible on E500 Version 2 or newer cores.
	82	*/
	83	#define CONFIG_ENABLE_36BIT_PHYS 1
	84
	85	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
	86
53677ef1	87	#define CONFIG_CMD_SDRAM 1 /* SDRAM DIMM SPD info printout */
7bd6104b	88	#define CONFIG_ENABLE_36BIT_PHYS 1
	89	#undef CFG_DRAM_TEST
	90	#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
	91	#define CFG_MEMTEST_END 0x00400000
	92
	93	/*
	94	* Base addresses -- Note these are effective addresses where the
	95	* actual resources get mapped (not physical addresses)
	96	*/
	97	#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
	98	#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
f69766e4	99	#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
7bd6104b	100	#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
	101
	102	#define PCI_SPEED 33333000 /* CPLD currenlty does not have PCI setup info */
	103	#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
	104	#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
	105	#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
	106
	107	/*
	108	* DDR Setup
	109	*/
	110	#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
	111	#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
	112
	113	#if defined(CONFIG_SPD_EEPROM)
	114	/*
	115	* Determine DDR configuration from I2C interface.
	116	*/
	117	#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
	118
	119	#else
	120	/*
	121	* Manually set up DDR parameters
	122	*/
	123	#define CFG_SDRAM_SIZE 1024 /* DDR is 1024MB */
	124	#define CFG_DDR_CS0_BNDS 0x0000000f /* 0-1024 */
	125	#define CFG_DDR_CS0_CONFIG 0x80000102
	126	#define CFG_DDR_TIMING_0 0x00260802
	127	#define CFG_DDR_TIMING_1 0x38355322
	128	#define CFG_DDR_TIMING_2 0x039048c7
	129	#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
	130	#define CFG_DDR_MODE 0x00000432
	131	#define CFG_DDR_INTERVAL 0x05150100
	132	#define DDR_SDRAM_CFG 0x43000000
	133	#endif
	134
	135	#undef CONFIG_CLOCKS_IN_MHZ
	136
	137	/*
	138	* Local Bus Definitions
	139	*/
	140
	141	/*
	142	* FLASH on the Local Bus
	143	* based on flash chip S29GL01GP
	144	* One bank, 128M, using the CFI driver.
	145	* Boot from BR0 bank at 0xf800_0000
	146	*
	147	* BR0:
	148	* Base address 0 = 0xF8000000 = BR0[0:16] = 1111 1000 0000 0000 0
	149	* Port Size = 16 bits = BRx[19:20] = 10
	150	* Use GPCM = BRx[24:26] = 000
	151	* Valid = BRx[31] = 1
	152	*
	153	* 0 4 8 12 16 20 24 28
	154	* 1111 1000 0000 0000 0001 0000 0000 0001 = f8001001 BR0
	155	*
	156	* OR0:
	157	* Addr Mask = 128M = ORx[0:16] = 1111 1000 0000 0000 0
	158	* Reserved ORx[17:18] = 00
	159	* CSNT = ORx[20] = 1
	160	* ACS = half cycle delay = ORx[21:22] = 11
	161	* SCY = 6 = ORx[24:27] = 0110
	162	* TRLX = use relaxed timing = ORx[29] = 1
	163	* EAD = use external address latch delay = OR[31] = 1
164	*
165	* 0 4 8 12 16 20 24 28
166	* 1111 1000 0000 0000 0000 1110 0110 0101 = f8000E65 ORx
167	*/
168
169	#define CFG_BOOT_BLOCK 0xf8000000 /* boot TLB block */
170	#define CFG_FLASH_BASE CFG_BOOT_BLOCK /* start of FLASH 128M */
171
172	#define CFG_BR0_PRELIM 0xf8001001
173
174	#define CFG_OR0_PRELIM 0xf8000E65
175
176	#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
177	#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */
178	#undef CFG_FLASH_CHECKSUM
179	#define CFG_FLASH_ERASE_TOUT 512000 /* Flash Erase Timeout (ms) */
180	#define CFG_FLASH_WRITE_TOUT 8000 /* Flash Write Timeout (ms) */
181
182
183	#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
184
185	#define CFG_FLASH_CFI_DRIVER 1
186	#define CFG_FLASH_CFI 1
187	#define CFG_FLASH_EMPTY_INFO
188
189	/*
190	* Flash on the LocalBus
191	*/
192	#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */
193
194	/* Memory */
195	#define CFG_INIT_RAM_LOCK 1
196	#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
197	#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
198
199	#define CFG_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */
200
201	#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
202	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
203	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
204
205	#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
206	#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
207
208	/* Serial Port */
209	#define CONFIG_CONS_INDEX 1
210	#undef CONFIG_SERIAL_SOFTWARE_FIFO
211	#define CFG_NS16550
212	#define CFG_NS16550_SERIAL
213	#define CFG_NS16550_REG_SIZE 1
214	#define CFG_NS16550_CLK get_bus_freq(0)
215
216	#define CFG_BAUDRATE_TABLE \
217	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
218
219	#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
220	#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
221
222	/* Use the HUSH parser */
223	#define CFG_HUSH_PARSER
224	#ifdef CFG_HUSH_PARSER
225	#define CFG_PROMPT_HUSH_PS2 "> "
226	#endif
227
228	/* pass open firmware flat tree */
229	#define CONFIG_OF_LIBFDT 1
230	#define CONFIG_OF_BOARD_SETUP 1
231
232	/*
233	* I2C
234	*/
235	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
236	#define CONFIG_HARD_I2C /* I2C with hardware support*/
237	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
238	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
239	#define CFG_I2C_EEPROM_ADDR 0x57
240	#define CFG_I2C_SLAVE 0x7F
241	#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
242	#define CFG_I2C_OFFSET 0x3000
243
244	/*
245	* General PCI
246	* Memory space is mapped 1-1, but I/O space must start from 0.
247	*/
248	#define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */
249
250	#define CFG_PCI1_MEM_BASE 0x80000000
251	#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
252	#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
253	#define CFG_PCI1_IO_BASE 0x00000000
254	#define CFG_PCI1_IO_PHYS 0xe2000000
255	#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
256
257	#ifdef CONFIG_PCI2
258	#define CFG_PCI2_MEM_BASE 0xC0000000
259	#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
260	#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
261	#define CFG_PCI2_IO_BASE 0x00000000
262	#define CFG_PCI2_IO_PHYS 0xe2800000
263	#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
264	#endif
265
266	#ifdef CONFIG_PCIE1
267	#define CFG_PCIE1_MEM_BASE 0xa0000000
268	#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
269	#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
270	#define CFG_PCIE1_IO_BASE 0x00000000
271	#define CFG_PCIE1_IO_PHYS 0xe3000000
272	#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */
273	#endif
274
275
276	#if !defined(CONFIG_PCI_PNP)
277	#define PCI_ENET0_IOADDR 0xe0000000
278	#define PCI_ENET0_MEMADDR 0xe0000000
53677ef1	279	#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
7bd6104b	280	#endif
	281
	282	#if defined(CONFIG_PCI)
	283
	284	#define CONFIG_NET_MULTI
	285	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	286
	287	#undef CONFIG_EEPRO100
	288	#undef CONFIG_TULIP
	289
	290	#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	291
	292	/* PCI view of System Memory */
	293	#define CFG_PCI_MEMORY_BUS 0x00000000
	294	#define CFG_PCI_MEMORY_PHYS 0x00000000
	295	#define CFG_PCI_MEMORY_SIZE 0x80000000
	296
	297	#endif /* CONFIG_PCI */
	298
	299	#if defined(CONFIG_TSEC_ENET)
	300
	301	#ifndef CONFIG_NET_MULTI
	302	#define CONFIG_NET_MULTI 1
	303	#endif
	304
	305	#define CONFIG_MII 1 /* MII PHY management */
	306	#define CONFIG_TSEC1 1
	307	#define CONFIG_TSEC1_NAME "eTSEC0"
	308	#define CONFIG_TSEC2 1
	309	#define CONFIG_TSEC2_NAME "eTSEC1"
	310	#define CONFIG_TSEC3 1
	311	#define CONFIG_TSEC3_NAME "eTSEC2"
	312	#define CONFIG_TSEC4 1
	313	#define CONFIG_TSEC4_NAME "eTSEC3"
	314	#undef CONFIG_MPC85XX_FEC
	315
	316	#define TSEC1_PHY_ADDR 0
	317	#define TSEC2_PHY_ADDR 1
	318	#define TSEC3_PHY_ADDR 2
	319	#define TSEC4_PHY_ADDR 3
	320
	321	#define TSEC1_PHYIDX 0
	322	#define TSEC2_PHYIDX 0
	323	#define TSEC3_PHYIDX 0
	324	#define TSEC4_PHYIDX 0
	325	#define TSEC1_FLAGS TSEC_GIGABIT
	326	#define TSEC2_FLAGS TSEC_GIGABIT
	327	#define TSEC3_FLAGS TSEC_GIGABIT
	328	#define TSEC4_FLAGS TSEC_GIGABIT
	329
	330	/* Options are: eTSEC[0-3] */
	331	#define CONFIG_ETHPRIME "eTSEC2"
	332	#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
	333	#endif /* CONFIG_TSEC_ENET */
	334
	335	/*
	336	* Environment
	337	*/
	338	#define CFG_ENV_IS_IN_FLASH 1
	339	#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
	340	#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
	341	#define CFG_ENV_SIZE 0x2000
	342
	343	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
344	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
345
346	/*
347	* BOOTP options
348	*/
349	#define CONFIG_BOOTP_BOOTFILESIZE
350	#define CONFIG_BOOTP_BOOTPATH
351	#define CONFIG_BOOTP_GATEWAY
352	#define CONFIG_BOOTP_HOSTNAME
353
354
355	/*
356	* Command line configuration.
357	*/
358	#include <config_cmd_default.h>
359
360	#define CONFIG_CMD_PING
361	#define CONFIG_CMD_I2C
362	#define CONFIG_CMD_MII
363
364	#if defined(CONFIG_PCI)
365	#define CONFIG_CMD_PCI
366	#endif
367
368
369	#undef CONFIG_WATCHDOG /* watchdog disabled */
370
371	/*
372	* Miscellaneous configurable options
373	*/
374	#define CFG_LONGHELP /* undef to save memory */
375	#define CFG_LOAD_ADDR 0x2000000 /* default load address */
376	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
377	#if defined(CONFIG_CMD_KGDB)
378	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
379	#else
380	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
381	#endif
382	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
383	#define CFG_MAXARGS 16 /* max number of command args */
384	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
385	#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
386
387	/*
388	* For booting Linux, the board info and command line data
389	* have to be in the first 8 MB of memory, since this is
390	* the maximum mapped by the Linux kernel during initialization.
391	*/
392	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
393
7bd6104b	394	/*
	395	* Internal Definitions
	396	*
	397	* Boot Flags
	398	*/
	399	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	400	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	401
	402	#if defined(CONFIG_CMD_KGDB)
	403	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	404	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	405	#endif
	406
	407	/*
	408	* Environment Configuration
	409	*/
	410
	411	/* The mac addresses for all ethernet interface */
	412	#if defined(CONFIG_TSEC_ENET)
	413	#define CONFIG_HAS_ETH0
	414	#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
	415	#define CONFIG_HAS_ETH1
	416	#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
	417	#define CONFIG_HAS_ETH2
	418	#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
	419	#define CONFIG_HAS_ETH3
	420	#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
	421	#endif
	422
	423	#define CONFIG_IPADDR 10.101.43.142
	424
	425	#define CONFIG_HOSTNAME atum
	426	#define CONFIG_ROOTPATH /nfsroot
	427	#define CONFIG_BOOTFILE /tftpboot/uImage.atum
	428	#define CONFIG_UBOOTPATH /tftpboot/uboot.bin /* TFTP server */
	429
	430	#define CONFIG_SERVERIP 10.101.43.10
	431	#define CONFIG_GATEWAYIP 10.101.45.1
	432	#define CONFIG_NETMASK 255.255.248.0
	433
	434	#define CONFIG_LOADADDR 1000000 /default location for tftp and bootm/
	435
	436	#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
	437	#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
	438
	439	#define CONFIG_BAUDRATE 115200
	440
	441	#define CONFIG_NFSBOOTCOMMAND \
	442	"setenv bootargs root=/dev/nfs rw " \
	443	"nfsroot=$serverip:$rootpath " \
	444	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	445	"console=$consoledev,$baudrate $othbootargs;" \
	446	"tftp $loadaddr $bootfile;" \
	447	"tftp $dtbaddr $dtbfile;" \
	448	"bootm $loadaddr - $dtbaddr"
	449
	450
	451	#define CONFIG_RAMBOOTCOMMAND \
	452	"setenv bootargs root=/dev/ram rw " \
	453	"console=$consoledev,$baudrate $othbootargs;" \
	454	"tftp $ramdiskaddr $ramdiskfile;" \
	455	"tftp $loadaddr $bootfile;" \
	456	"tftp $dtbaddr $dtbfile;" \
	457	"bootm $loadaddr $ramdiskaddr $dtbaddr"
458
459	#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
460
461	#endif /* __CONFIG_H */