]>
Commit | Line | Data |
---|---|---|
f18f47f4 WD |
1 | /* |
2 | * A collection of structures, addresses, and values associated with | |
3 | * the Motorola 860T FADS board. Copied from the MBX stuff. | |
4 | * Magnus Damm added defines for 8xxrom and extended bd_info. | |
5 | * Helmut Buchsbaum added bitvalues for BCSRx | |
6 | * | |
7 | * Copyright (c) 1998 Dan Malek (dmalek@jlc.net) | |
8 | */ | |
9 | ||
10 | /* | |
11 | * The GENIETV is using the following physical memorymap (copied from | |
12 | * the FADS configuration): | |
13 | * | |
14 | * ff020000 -> ff02ffff : pcmcia | |
15 | * ff010000 -> ff01ffff : BCSR connected to CS1, setup by 8xxROM | |
16 | * ff000000 -> ff00ffff : IMAP internal in the cpu | |
17 | * 30000000 -> 300fffff : flash connected to CS0 | |
18 | * 00000000 -> nnnnnnnn : sdram setup by U-Boot | |
19 | * | |
20 | * CS pins are connected as follows: | |
21 | * | |
22 | * CS0 -512Kb boot flash | |
23 | * CS1 - SDRAM #1 | |
24 | * CS2 - SDRAM #2 | |
25 | * CS3 - Flash #1 | |
26 | * CS4 - Flash #2 | |
27 | * CS5 - Lon (if present) | |
28 | * CS6 - PCMCIA #1 | |
29 | * CS7 - PCMCIA #2 | |
30 | */ | |
31 | ||
32 | /* ------------------------------------------------------------------------- */ | |
33 | ||
34 | /* | |
35 | * board/config.h - configuration options, board specific | |
36 | */ | |
37 | ||
38 | #ifndef __CONFIG_H | |
39 | #define __CONFIG_H | |
40 | ||
41 | #define CONFIG_ETHADDR 08:00:22:50:70:63 /* Ethernet address */ | |
42 | #define CONFIG_ENV_OVERWRITE 1 /* Overwrite the environment */ | |
43 | ||
6d0f6bcf | 44 | #define CONFIG_SYS_ALLOC_DPRAM /* Use dynamic DPRAM allocation */ |
f18f47f4 | 45 | |
6d0f6bcf | 46 | #define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ |
f18f47f4 WD |
47 | |
48 | /*#define CONFIG_VIDEO 1 / To enable the video initialization */ | |
49 | /*#define CONFIG_VIDEO_ADDR 0x00200000 */ | |
50 | /*#define CONFIG_HARD_I2C 1 / I2C with hardware support */ | |
51 | /*#define CONFIG_PCMCIA 1 / To enable the PCMCIA initialization */ | |
52 | ||
6d0f6bcf JCPV |
53 | /*#define CONFIG_SYS_PCMCIA_IO_ADDR 0xff020000 */ |
54 | /*#define CONFIG_SYS_PCMCIA_IO_SIZE 0x10000 */ | |
55 | /*#define CONFIG_SYS_PCMCIA_MEM_ADDR 0xe0000000 */ | |
56 | /*#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x10000 */ | |
f18f47f4 WD |
57 | |
58 | /* Video related */ | |
59 | ||
60 | /*#define CONFIG_VIDEO_LOGO 1 / Show the logo */ | |
61 | /*#define CONFIG_VIDEO_ENCODER_AD7177 1 / Enable this encoder */ | |
62 | /*#define CONFIG_VIDEO_ENCODER_AD7177_ADDR 0xF4 / ALSB to ground */ | |
63 | ||
64 | /* Wireless 56Khz 4PPM keyboard on SMCx */ | |
65 | ||
682011ff | 66 | /*#define CONFIG_KEYBOARD 0 */ |
f18f47f4 WD |
67 | /*#define CONFIG_WL_4PPM_KEYBOARD_SMC 0 / SMC to use (0 indexed) */ |
68 | ||
69 | /* | |
70 | * High Level Configuration Options | |
71 | * (easy to change) | |
72 | */ | |
73 | #include <mpc8xx_irq.h> | |
74 | ||
75 | #define CONFIG_GENIETV 1 | |
76 | #define CONFIG_MPC823 1 | |
77 | ||
78 | #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ | |
79 | #undef CONFIG_8xx_CONS_SMC2 | |
80 | #undef CONFIG_8xx_CONS_NONE | |
81 | #define CONFIG_BAUDRATE 9600 | |
82 | ||
53677ef1 WD |
83 | #define MPC8XX_FACT 12 /* Multiply by 12 */ |
84 | #define MPC8XX_XIN 5000000 /* 4 MHz clock */ | |
f18f47f4 | 85 | |
53677ef1 | 86 | #define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT)) |
6d0f6bcf | 87 | #define CONFIG_SYS_PLPRCR_MF ((MPC8XX_FACT-1) << 20) |
f18f47f4 WD |
88 | #define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ /* Force it - dont measure it */ |
89 | ||
90 | #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ | |
91 | ||
92 | #if 1 | |
93 | #define CONFIG_BOOTDELAY 1 /* autoboot after 2 seconds */ | |
94 | #define CONFIG_LOADS_ECHO 0 /* Dont echoes received characters */ | |
95 | #define CONFIG_BOOTARGS "" | |
96 | #define CONFIG_BOOTCOMMAND \ | |
97 | "bootp; tftp; " \ | |
53677ef1 WD |
98 | "setenv bootargs console=tty0 console=ttyS0 " \ |
99 | "root=/dev/nfs nfsroot=${serverip}:${rootpath} " \ | |
100 | "ip=${ipaddr}:${serverip}:${gatewayip}:${subnetmask}:${hostname}:eth0:off ;" \ | |
f18f47f4 WD |
101 | "bootm " |
102 | #else | |
103 | #define CONFIG_BOOTDELAY 0 /* autoboot disabled */ | |
104 | #endif | |
105 | ||
106 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
107 | ||
60a0876b | 108 | |
11799434 JL |
109 | /* |
110 | * BOOTP options | |
111 | */ | |
112 | #define CONFIG_BOOTP_BOOTFILESIZE | |
113 | #define CONFIG_BOOTP_BOOTPATH | |
114 | #define CONFIG_BOOTP_GATEWAY | |
115 | #define CONFIG_BOOTP_HOSTNAME | |
116 | ||
117 | ||
60a0876b JL |
118 | /* |
119 | * Command line configuration. | |
120 | */ | |
121 | #include <config_cmd_default.h> | |
122 | ||
f18f47f4 WD |
123 | |
124 | /* | |
125 | * Miscellaneous configurable options | |
126 | */ | |
6d0f6bcf JCPV |
127 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
128 | #define CONFIG_SYS_PROMPT ":>" /* Monitor Command Prompt */ | |
60a0876b | 129 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 130 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
f18f47f4 | 131 | #else |
6d0f6bcf | 132 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
f18f47f4 | 133 | #endif |
6d0f6bcf JCPV |
134 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
135 | #define CONFIG_SYS_MAXARGS 8 /* max number of command args */ | |
136 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
f18f47f4 | 137 | |
6d0f6bcf JCPV |
138 | #define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ |
139 | #define CONFIG_SYS_MEMTEST_END 0x00800000 /* 0 ... 8 MB in DRAM */ | |
f18f47f4 | 140 | |
6d0f6bcf | 141 | #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ |
f18f47f4 | 142 | |
6d0f6bcf | 143 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ |
f18f47f4 | 144 | |
6d0f6bcf | 145 | #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } |
f18f47f4 WD |
146 | |
147 | /* | |
148 | * Low Level Configuration Settings | |
149 | * (address mappings, register initial values, etc.) | |
150 | * You should know what you are doing if you make changes here. | |
151 | */ | |
152 | /*----------------------------------------------------------------------- | |
153 | * Internal Memory Mapped Register | |
154 | */ | |
6d0f6bcf JCPV |
155 | #define CONFIG_SYS_IMMR 0xFF000000 |
156 | #define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024)) | |
f18f47f4 WD |
157 | |
158 | /*----------------------------------------------------------------------- | |
159 | * Definitions for initial stack pointer and data area (in DPRAM) | |
160 | */ | |
6d0f6bcf JCPV |
161 | #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR |
162 | #define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ | |
163 | #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ | |
164 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) | |
165 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
f18f47f4 WD |
166 | |
167 | /*----------------------------------------------------------------------- | |
168 | * Start addresses for the final memory configuration | |
169 | * (Set up by the startup code) | |
6d0f6bcf | 170 | * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
f18f47f4 WD |
171 | * Also NOTE that it doesn't mean SDRAM - it means MEMORY. |
172 | */ | |
6d0f6bcf JCPV |
173 | #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
174 | #define CONFIG_SYS_FLASH_BASE 0x02800000 | |
175 | #define CONFIG_SYS_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */ | |
f18f47f4 | 176 | #if 0 |
6d0f6bcf | 177 | #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 128 kB for Monitor */ |
f18f47f4 | 178 | #else |
6d0f6bcf | 179 | #define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ |
f18f47f4 | 180 | #endif |
6d0f6bcf JCPV |
181 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE |
182 | #define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 128 kB for malloc() */ | |
f18f47f4 WD |
183 | |
184 | /* | |
185 | * For booting Linux, the board info and command line data | |
186 | * have to be in the first 8 MB of memory, since this is | |
187 | * the maximum mapped by the Linux kernel during initialization. | |
188 | */ | |
6d0f6bcf | 189 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
f18f47f4 WD |
190 | /*----------------------------------------------------------------------- |
191 | * FLASH organization | |
192 | */ | |
6d0f6bcf JCPV |
193 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
194 | #define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ | |
f18f47f4 | 195 | |
6d0f6bcf JCPV |
196 | #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
197 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ | |
f18f47f4 | 198 | |
5a1aceb0 | 199 | #define CONFIG_ENV_IS_IN_FLASH 1 |
0e8d1586 JCPV |
200 | #define CONFIG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */ |
201 | #define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector (64k)*/ | |
f18f47f4 WD |
202 | |
203 | /* values according to the manual */ | |
204 | ||
205 | /*----------------------------------------------------------------------- | |
206 | * Cache Configuration | |
207 | */ | |
6d0f6bcf | 208 | #define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ |
60a0876b | 209 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 210 | #define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ |
f18f47f4 WD |
211 | #endif |
212 | ||
213 | /*----------------------------------------------------------------------- | |
214 | * SYPCR - System Protection Control 11-9 | |
215 | * SYPCR can only be written once after reset! | |
216 | *----------------------------------------------------------------------- | |
217 | * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze | |
218 | */ | |
219 | #if defined(CONFIG_WATCHDOG) | |
6d0f6bcf | 220 | #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ |
f18f47f4 WD |
221 | SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) |
222 | #else | |
6d0f6bcf | 223 | #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) |
f18f47f4 WD |
224 | #endif |
225 | ||
226 | /*----------------------------------------------------------------------- | |
227 | * SIUMCR - SIU Module Configuration 11-6 | |
228 | *----------------------------------------------------------------------- | |
229 | * PCMCIA config., multi-function pin tri-state | |
230 | * | |
6d0f6bcf | 231 | #define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) |
f18f47f4 | 232 | */ |
6d0f6bcf | 233 | #define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC10) |
f18f47f4 WD |
234 | |
235 | /*----------------------------------------------------------------------- | |
236 | * TBSCR - Time Base Status and Control 11-26 | |
237 | *----------------------------------------------------------------------- | |
238 | * Clear Reference Interrupt Status, Timebase freezing enabled | |
239 | */ | |
6d0f6bcf | 240 | #define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) |
f18f47f4 WD |
241 | |
242 | /*----------------------------------------------------------------------- | |
243 | * PISCR - Periodic Interrupt Status and Control 11-31 | |
244 | *----------------------------------------------------------------------- | |
245 | * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled | |
246 | */ | |
6d0f6bcf | 247 | #define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) |
f18f47f4 WD |
248 | |
249 | /*----------------------------------------------------------------------- | |
250 | * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 | |
251 | *----------------------------------------------------------------------- | |
252 | * Reset PLL lock status sticky bit, timer expired status bit and timer * | |
253 | * interrupt status bit - leave PLL multiplication factor unchanged ! | |
254 | * | |
6d0f6bcf | 255 | * #define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) |
f18f47f4 | 256 | */ |
6d0f6bcf | 257 | #define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | CONFIG_SYS_PLPRCR_MF) |
f18f47f4 WD |
258 | |
259 | /*----------------------------------------------------------------------- | |
260 | * SCCR - System Clock and reset Control Register 15-27 | |
261 | *----------------------------------------------------------------------- | |
262 | * Set clock output, timebase and RTC source and divider, | |
263 | * power management and some other internal clocks | |
264 | */ | |
265 | #define SCCR_MASK SCCR_EBDF11 | |
6d0f6bcf | 266 | #define CONFIG_SYS_SCCR (SCCR_TBS | \ |
f18f47f4 WD |
267 | SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ |
268 | SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ | |
269 | SCCR_DFALCD00) | |
270 | ||
271 | /*----------------------------------------------------------------------- | |
272 | * | |
273 | *----------------------------------------------------------------------- | |
274 | * | |
275 | */ | |
6d0f6bcf | 276 | #define CONFIG_SYS_DER 0 |
f18f47f4 WD |
277 | |
278 | /* Because of the way the 860 starts up and assigns CS0 the | |
279 | * entire address space, we have to set the memory controller | |
280 | * differently. Normally, you write the option register | |
281 | * first, and then enable the chip select by writing the | |
282 | * base register. For CS0, you must write the base register | |
283 | * first, followed by the option register. | |
284 | */ | |
285 | ||
286 | /* | |
287 | * Init Memory Controller: | |
288 | * | |
289 | * BR0 and OR0(FLASH) | |
290 | */ | |
291 | ||
292 | #define FLASH_BASE0_PRELIM 0x02800000 /* FLASH bank #0 */ | |
293 | ||
6d0f6bcf JCPV |
294 | #define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ |
295 | #define CONFIG_SYS_PRELIM_OR_AM 0xFF800000 /* OR addr mask (512Kb) */ | |
f18f47f4 WD |
296 | |
297 | /* FLASH timing */ | |
6d0f6bcf | 298 | #define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \ |
f18f47f4 WD |
299 | OR_SCY_15_CLK | OR_TRLX ) |
300 | ||
6d0f6bcf JCPV |
301 | /*#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) */ |
302 | #define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) /* 0xfff80ff4 */ | |
303 | #define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8) /* 0x02800401 */ | |
f18f47f4 WD |
304 | |
305 | /* | |
306 | * BR1/2 and OR1/2 (SDRAM) | |
307 | */ | |
308 | ||
6d0f6bcf | 309 | #define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 |
f18f47f4 WD |
310 | |
311 | #define SDRAM_MAX_SIZE 0x04000000 /* 64Mb bank */ | |
312 | #define SDRAM_BASE1_PRELIM 0x00000000 /* First bank */ | |
313 | #define SDRAM_BASE2_PRELIM 0x10000000 /* Second bank */ | |
314 | ||
315 | /* | |
316 | * Memory Periodic Timer Prescaler | |
317 | */ | |
318 | ||
319 | /* periodic timer for refresh */ | |
6d0f6bcf | 320 | #define CONFIG_SYS_MBMR_PTB 0x5d /* start with divider for 100 MHz */ |
f18f47f4 WD |
321 | |
322 | /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ | |
6d0f6bcf JCPV |
323 | #define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ |
324 | #define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 | |
f18f47f4 WD |
325 | /* |
326 | * MBMR settings for SDRAM | |
327 | */ | |
328 | ||
329 | /* 8 column SDRAM */ | |
6d0f6bcf | 330 | #define CONFIG_SYS_MBMR_8COL ((CONFIG_SYS_MBMR_PTB << MAMR_PTA_SHIFT) | MAMR_PTAE | \ |
f18f47f4 WD |
331 | MAMR_G0CLA_A11 | MAMR_RLFA_1X | MAMR_WLFA_1X \ |
332 | | MAMR_TLFA_4X) /* 0x5d802114 */ | |
333 | ||
334 | /* | |
335 | * Internal Definitions | |
336 | * | |
337 | * Boot Flags | |
338 | */ | |
339 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
340 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
341 | ||
342 | /* values according to the manual */ | |
343 | ||
344 | #define CONFIG_DRAM_50MHZ 1 | |
345 | #define CONFIG_SDRAM_50MHZ | |
346 | ||
347 | /* We don't use the 8259. | |
348 | */ | |
349 | #define NR_8259_INTS 0 | |
350 | ||
f18f47f4 WD |
351 | /* |
352 | * MPC8xx CPM Options | |
353 | */ | |
354 | #define CONFIG_SCC_ENET 1 | |
355 | ||
356 | #define CONFIG_DISK_SPINUP_TIME 1000000 | |
357 | ||
358 | /* PCMCIA configuration */ | |
359 | ||
360 | #define PCMCIA_MAX_SLOTS 1 | |
361 | #define PCMCIA_SLOT_B 1 | |
362 | ||
363 | #endif /* __CONFIG_H */ |