[people/ms/u-boot.git] / include / configs / IAD210.h

/*
 * (C) Copyright 2001, 2002
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <mpc8xx_irq.h>


# ifdef DEBUG
#  warning DEBUG Defined
# endif /* DEBUG */

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_MPC860		1
#define CONFIG_IAD210		1	/* ...on a IAD210  module	*/
#define CONFIG_MPC860T		1
#define CONFIG_MPC862		1

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/

#undef  CONFIG_8xx_CONS_SMC1
#undef  CONFIG_8xx_CONS_SMC2
#define CONFIG_8xx_CONS_SCC2   /* V24 on SCC2 */
#undef  CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE		9600


# define MPC8XX_FACT            16
# define CONFIG_8xx_GCLK_FREQ   (64000000L)  /* define if can't use get_gclk_freq */
# define CONFIG_CLOCKS_IN_MHZ	1            /* clocks passsed to Linux in MHz */

#if 0
# define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
#else
# define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
#endif

#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"

/* using this define saves us updating another source file */
#define CONFIG_BOARD_EARLY_INIT_F 1
#define CONFIG_MISC_INIT_R

#undef	CONFIG_BOOTARGS
/* #define CONFIG_BOOTCOMMAND							\
	"bootp;"								\
	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
	"bootm"
*/

#define CONFIG_BOOTCOMMAND	\
	"setenv bootargs root=/dev/nfs"	\
	"ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; "	\

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

/* #define	CONFIG_STATUS_LED	1*/	/* Status LED enabled		*/

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE


# undef  CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
# define CONFIG_FEC_ENET    1	/* use FEC ethernet  */
# define CONFIG_MII         1
# define CONFIG_SYS_DISCOVER_PHY   1
# define CONFIG_FEC_UTOPIA  1
# define CONFIG_ETHADDR     08:00:06:26:A2:6D
# define CONFIG_IPADDR      192.168.28.128
# define CONFIG_SERVERIP    139.10.137.138
# define CONFIG_SYS_DISCOVER_PHY   1

#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

/* enable I2C and select the hardware/software driver */
#undef  CONFIG_HARD_I2C			/* I2C with hardware support    */
#define CONFIG_SOFT_I2C		1	/* I2C bit-banged               */
# define CONFIG_SYS_I2C_SPEED		50000
# define CONFIG_SYS_I2C_SLAVE		0xDD
# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
/*
 * Software (bit-bang) I2C driver configuration
 */
#define PB_SCL		0x00000020	/* PB 26 */
#define PB_SDA		0x00000010	/* PB 27 */

#define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
#define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
#define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
#define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
#define I2C_SDA(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
			else    immr->im_cpm.cp_pbdat &= ~PB_SDA
#define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */

#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DATE


/*
 * Miscellaneous configurable options
 */
#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/

#define CONFIG_SYS_LOAD_ADDR		0x00100000

#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Internal Memory Mapped Register
 */
#define CONFIG_SYS_IMMR		0xFFF00000
#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define	CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		0x08000000
#define CONFIG_SYS_FLASH_SIZE		((uint)(4 * 1024 * 1024))	/* max 16Mbyte */

#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100

#if defined(DEBUG)
# define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
#else
# define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
#endif

# define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
# define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/

#define	CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_OFFSET		0x8000
#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
#endif

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control					11-9
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 */
#if defined(CONFIG_WATCHDOG)
#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
#else
#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
#endif

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration					11-6
 *-----------------------------------------------------------------------
 * PCMCIA config., multi-function pin tri-state
 */
#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)

/*-----------------------------------------------------------------------
 * TBSCR - Time Base Status and Control					11-26
 *-----------------------------------------------------------------------
 * Clear Reference Interrupt Status, Timebase freezing enabled
 */
#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control		11-31
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 */
#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)

/*-----------------------------------------------------------------------
 * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
 *-----------------------------------------------------------------------
 * set the PLL, the low-power modes and the reset control (15-29)
 */
#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)

/*-----------------------------------------------------------------------
 * SCCR - System Clock and reset Control Register		15-27
 *-----------------------------------------------------------------------
 * Set clock output, timebase and RTC source and divider,
 * power management and some other internal clocks
 */
#define SCCR_MASK	SCCR_EBDF11

#define CONFIG_SYS_SCCR	(SCCR_TBS	| SCCR_COM00	| SCCR_DFSYNC00	| \
			 SCCR_DFBRG00	| SCCR_DFNL000	| SCCR_DFNH000	| \
			 SCCR_DFLCD000	|SCCR_DFALCD00	)

/*-----------------------------------------------------------------------
 * RCCR - RISC Controller Configuration Register		19-4
 *-----------------------------------------------------------------------
 */
/* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */
#define CONFIG_SYS_RCCR 0x0020

/*-----------------------------------------------------------------------
 * PCMCIA stuff
 *-----------------------------------------------------------------------
 */
#define PCMCIA_MEM_ADDR		((uint)0xff020000)
#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))

/*-----------------------------------------------------------------------
 *
 *-----------------------------------------------------------------------
 *
 */
#define CONFIG_SYS_DER		0

/* Because of the way the 860 starts up and assigns CS0 the
* entire address space, we have to set the memory controller
* differently.  Normally, you write the option register
* first, and then enable the chip select by writing the
* base register.  For CS0, you must write the base register
* first, followed by the option register.
*/

/*
 * Init Memory Controller:
 *
 * BR0 and OR0 (FLASH)
 */

#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/

/* used to re-map FLASH both when starting from SRAM or FLASH:
 * restrict access enough to keep SRAM working (if any)
 * but not too much to meddle with FLASH accesses
 */
#define CONFIG_SYS_REMAP_OR_AM		0xF8000000	/* OR addr mask */
#define CONFIG_SYS_PRELIM_OR_AM	0xF8000000	/* OR addr mask */

/* FLASH timing:
 TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1	*/
#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | \
				 OR_SCY_3_CLK | OR_EHTR)

#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )

/*
 * BR2/3 and OR2/3 (SDRAM)
 *
 */
#define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM bank #0	*/
#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/

/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/

#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | OR_CSNT_SAM  | OR_BI | OR_ACS_DIV4)
#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)

/*
 * Memory Periodic Timer Prescaler
 */

/* periodic timer for refresh */
#define CONFIG_SYS_MAMR_PTA	124		/* start with divider for 64 MHz	*/

/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
#define CONFIG_SYS_MPTPR	        MPTPR_PTP_DIV32		/* setting for 1 bank	*/

/*
 * MAMR settings for SDRAM
 */

#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_8X)


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#ifdef CONFIG_MPC860T

/* Interrupt level assignments.
*/
#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */

#endif /* CONFIG_MPC860T */


#endif	/* __CONFIG_H */
Commit	Line	Data
0f8c9768 WD	1	/*
	2	* (C) Copyright 2001, 2002
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	#include <mpc8xx_irq.h>
	32
	33
	34	# ifdef DEBUG
	35	# warning DEBUG Defined
	36	# endif /* DEBUG */
	37
	38	/*
	39	* High Level Configuration Options
	40	* (easy to change)
	41	*/
	42	#define CONFIG_MPC860 1
	43	#define CONFIG_IAD210 1 /* ...on a IAD210 module */
	44	#define CONFIG_MPC860T 1
	45	#define CONFIG_MPC862 1
	46
	47	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	48
	49	#undef CONFIG_8xx_CONS_SMC1
	50	#undef CONFIG_8xx_CONS_SMC2
	51	#define CONFIG_8xx_CONS_SCC2 /* V24 on SCC2 */
	52	#undef CONFIG_8xx_CONS_NONE
	53	#define CONFIG_BAUDRATE 9600
	54
	55
	56	# define MPC8XX_FACT 16
	57	# define CONFIG_8xx_GCLK_FREQ (64000000L) /* define if can't use get_gclk_freq */
	58	# define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
	59
	60	#if 0
	61	# define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	62	#else
	63	# define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	64	#endif
65
32bf3d14	66	#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
0f8c9768 WD	67
0f8c9768 WD	68	/* using this define saves us updating another source file */
c837dcb1	69	#define CONFIG_BOARD_EARLY_INIT_F 1
d8d21e69	70	#define CONFIG_MISC_INIT_R
0f8c9768 WD	71
	72	#undef CONFIG_BOOTARGS
	73	/* #define CONFIG_BOOTCOMMAND \
53677ef1 WD	74	"bootp;" \
	75	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
	76	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
	77	"bootm"
0f8c9768 WD	78	*/
	79
	80	#define CONFIG_BOOTCOMMAND \
53677ef1 WD	81	"setenv bootargs root=/dev/nfs" \
53677ef1 WD	82	"ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; " \
0f8c9768 WD	83
	84	#undef CONFIG_WATCHDOG /* watchdog disabled */
	85
	86	/* #define CONFIG_STATUS_LED 1/ / Status LED enabled */
	87
7be044e4 JL	88	/*
	89	* BOOTP options
	90	*/
	91	#define CONFIG_BOOTP_SUBNETMASK
	92	#define CONFIG_BOOTP_GATEWAY
	93	#define CONFIG_BOOTP_HOSTNAME
	94	#define CONFIG_BOOTP_BOOTPATH
	95	#define CONFIG_BOOTP_BOOTFILESIZE
	96
0f8c9768 WD	97
	98	# undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
	99	# define CONFIG_FEC_ENET 1 /* use FEC ethernet */
63ff004c	100	# define CONFIG_MII 1
6d0f6bcf	101	# define CONFIG_SYS_DISCOVER_PHY 1
0f8c9768 WD	102	# define CONFIG_FEC_UTOPIA 1
	103	# define CONFIG_ETHADDR 08:00:06:26:A2:6D
	104	# define CONFIG_IPADDR 192.168.28.128
	105	# define CONFIG_SERVERIP 139.10.137.138
6d0f6bcf	106	# define CONFIG_SYS_DISCOVER_PHY 1
0f8c9768 WD	107
	108	#define CONFIG_MAC_PARTITION
	109	#define CONFIG_DOS_PARTITION
	110
	111	/* enable I2C and select the hardware/software driver */
	112	#undef CONFIG_HARD_I2C /* I2C with hardware support */
	113	#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
6d0f6bcf JCPV	114	# define CONFIG_SYS_I2C_SPEED 50000
	115	# define CONFIG_SYS_I2C_SLAVE 0xDD
	116	# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
0f8c9768 WD	117	/*
	118	* Software (bit-bang) I2C driver configuration
	119	*/
	120	#define PB_SCL 0x00000020 /* PB 26 */
	121	#define PB_SDA 0x00000010 /* PB 27 */
	122
	123	#define I2C_INIT (immr->im_cpm.cp_pbdir \|= PB_SCL)
	124	#define I2C_ACTIVE (immr->im_cpm.cp_pbdir \|= PB_SDA)
	125	#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
	126	#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
	127	#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat \|= PB_SDA; \
	128	else immr->im_cpm.cp_pbdat &= ~PB_SDA
	129	#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat \|= PB_SCL; \
	130	else immr->im_cpm.cp_pbdat &= ~PB_SCL
	131	#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
	132
	133	#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
	134
0f8c9768	135
348f258f JL	136	/*
	137	* Command line configuration.
	138	*/
	139	#include <config_cmd_default.h>
	140
	141	#define CONFIG_CMD_ASKENV
	142	#define CONFIG_CMD_DHCP
	143	#define CONFIG_CMD_DATE
	144
0f8c9768 WD	145
	146	/*
	147	* Miscellaneous configurable options
	148	*/
6d0f6bcf JCPV	149	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	150	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
348f258f	151	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	152	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
0f8c9768	153	#else
6d0f6bcf	154	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
0f8c9768	155	#endif
6d0f6bcf JCPV	156	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	157	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	158	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
0f8c9768	159
6d0f6bcf JCPV	160	#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
6d0f6bcf JCPV	161	#define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
0f8c9768	162
6d0f6bcf	163	#define CONFIG_SYS_LOAD_ADDR 0x00100000
0f8c9768	164
6d0f6bcf	165	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
0f8c9768	166
6d0f6bcf	167	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
0f8c9768 WD	168
	169	/*
	170	* Low Level Configuration Settings
	171	* (address mappings, register initial values, etc.)
	172	* You should know what you are doing if you make changes here.
	173	*/
	174	/*-----------------------------------------------------------------------
	175	* Internal Memory Mapped Register
	176	*/
6d0f6bcf JCPV	177	#define CONFIG_SYS_IMMR 0xFFF00000
6d0f6bcf JCPV	178	#define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024))
0f8c9768 WD	179
	180	/*-----------------------------------------------------------------------
	181	* Definitions for initial stack pointer and data area (in DPRAM)
	182	*/
6d0f6bcf JCPV	183	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
	184	#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
	185	#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	186	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	187	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
0f8c9768 WD	188
	189	/*-----------------------------------------------------------------------
	190	* Start addresses for the final memory configuration
	191	* (Set up by the startup code)
6d0f6bcf	192	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
0f8c9768	193	*/
6d0f6bcf JCPV	194	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	195	#define CONFIG_SYS_FLASH_BASE 0x08000000
	196	#define CONFIG_SYS_FLASH_SIZE ((uint)(4 * 1024 * 1024)) /* max 16Mbyte */
0f8c9768	197
6d0f6bcf	198	#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
0f8c9768 WD	199
0f8c9768 WD	200	#if defined(DEBUG)
6d0f6bcf	201	# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
0f8c9768	202	#else
6d0f6bcf	203	# define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
0f8c9768 WD	204	#endif
0f8c9768 WD	205
6d0f6bcf JCPV	206	# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
6d0f6bcf JCPV	207	# define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
0f8c9768 WD	208
	209	/*
	210	* For booting Linux, the board info and command line data
	211	* have to be in the first 8 MB of memory, since this is
	212	* the maximum mapped by the Linux kernel during initialization.
	213	*/
6d0f6bcf	214	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
0f8c9768 WD	215	/*-----------------------------------------------------------------------
	216	* FLASH organization
	217	*/
6d0f6bcf JCPV	218	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
6d0f6bcf JCPV	219	#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
0f8c9768	220
6d0f6bcf JCPV	221	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
6d0f6bcf JCPV	222	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
0f8c9768	223
5a1aceb0	224	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	225	#define CONFIG_ENV_OFFSET 0x8000
0e8d1586 JCPV	226	#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
0f8c9768 WD	227
	228	/*-----------------------------------------------------------------------
	229	* Cache Configuration
	230	*/
6d0f6bcf	231	#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
348f258f	232	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	233	#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
0f8c9768 WD	234	#endif
	235
	236	/*-----------------------------------------------------------------------
	237	* SYPCR - System Protection Control 11-9
	238	* SYPCR can only be written once after reset!
	239	*-----------------------------------------------------------------------
	240	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	241	*/
	242	#if defined(CONFIG_WATCHDOG)
6d0f6bcf	243	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
0f8c9768 WD	244	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
0f8c9768 WD	245	#else
6d0f6bcf	246	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| SYPCR_SWP)
0f8c9768 WD	247	#endif
	248
	249	/*-----------------------------------------------------------------------
	250	* SIUMCR - SIU Module Configuration 11-6
	251	*-----------------------------------------------------------------------
	252	* PCMCIA config., multi-function pin tri-state
	253	*/
6d0f6bcf	254	#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01)
0f8c9768 WD	255
	256	/*-----------------------------------------------------------------------
	257	* TBSCR - Time Base Status and Control 11-26
	258	*-----------------------------------------------------------------------
	259	* Clear Reference Interrupt Status, Timebase freezing enabled
	260	*/
6d0f6bcf	261	#define CONFIG_SYS_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)
0f8c9768 WD	262
	263	/*-----------------------------------------------------------------------
	264	* PISCR - Periodic Interrupt Status and Control 11-31
	265	*-----------------------------------------------------------------------
	266	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	267	*/
6d0f6bcf	268	#define CONFIG_SYS_PISCR (PISCR_PS \| PISCR_PITF)
0f8c9768 WD	269
	270	/*-----------------------------------------------------------------------
	271	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	272	*-----------------------------------------------------------------------
	273	* set the PLL, the low-power modes and the reset control (15-29)
	274	*/
6d0f6bcf	275	#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) \| \
0f8c9768 WD	276	PLPRCR_SPLSS \| PLPRCR_TEXPS \| PLPRCR_TMIST)
	277
	278	/*-----------------------------------------------------------------------
	279	* SCCR - System Clock and reset Control Register 15-27
	280	*-----------------------------------------------------------------------
	281	* Set clock output, timebase and RTC source and divider,
	282	* power management and some other internal clocks
	283	*/
	284	#define SCCR_MASK SCCR_EBDF11
	285
6d0f6bcf	286	#define CONFIG_SYS_SCCR (SCCR_TBS \| SCCR_COM00 \| SCCR_DFSYNC00 \| \
0f8c9768 WD	287	SCCR_DFBRG00 \| SCCR_DFNL000 \| SCCR_DFNH000 \| \
	288	SCCR_DFLCD000 \|SCCR_DFALCD00 )
	289
	290	/*-----------------------------------------------------------------------
	291	* RCCR - RISC Controller Configuration Register 19-4
	292	*-----------------------------------------------------------------------
	293	*/
	294	/* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */
6d0f6bcf	295	#define CONFIG_SYS_RCCR 0x0020
0f8c9768 WD	296
	297	/*-----------------------------------------------------------------------
	298	* PCMCIA stuff
	299	*-----------------------------------------------------------------------
	300	*/
	301	#define PCMCIA_MEM_ADDR ((uint)0xff020000)
	302	#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
	303
	304	/*-----------------------------------------------------------------------
	305	*
	306	*-----------------------------------------------------------------------
	307	*
	308	*/
6d0f6bcf	309	#define CONFIG_SYS_DER 0
0f8c9768 WD	310
	311	/* Because of the way the 860 starts up and assigns CS0 the
	312	* entire address space, we have to set the memory controller
	313	* differently. Normally, you write the option register
	314	* first, and then enable the chip select by writing the
	315	* base register. For CS0, you must write the base register
	316	* first, followed by the option register.
	317	*/
	318
	319	/*
	320	* Init Memory Controller:
	321	*
	322	* BR0 and OR0 (FLASH)
	323	*/
	324
6d0f6bcf	325	#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
0f8c9768 WD	326
	327	/* used to re-map FLASH both when starting from SRAM or FLASH:
	328	* restrict access enough to keep SRAM working (if any)
	329	* but not too much to meddle with FLASH accesses
	330	*/
6d0f6bcf JCPV	331	#define CONFIG_SYS_REMAP_OR_AM 0xF8000000 /* OR addr mask */
6d0f6bcf JCPV	332	#define CONFIG_SYS_PRELIM_OR_AM 0xF8000000 /* OR addr mask */
0f8c9768 WD	333
	334	/* FLASH timing:
	335	TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */
6d0f6bcf	336	#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM \| OR_BI \| \
0f8c9768 WD	337	OR_SCY_3_CLK \| OR_EHTR)
0f8c9768 WD	338
6d0f6bcf JCPV	339	#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM \| CONFIG_SYS_OR_TIMING_FLASH)
6d0f6bcf JCPV	340	#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_V )
0f8c9768 WD	341
	342	/*
	343	* BR2/3 and OR2/3 (SDRAM)
	344	*
	345	*/
	346	#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank #0 */
	347	#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
	348
	349	/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
	350
6d0f6bcf JCPV	351	#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM \| OR_CSNT_SAM \| OR_BI \| OR_ACS_DIV4)
	352	#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )
	353	#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V)
0f8c9768 WD	354
	355	/*
	356	* Memory Periodic Timer Prescaler
	357	*/
	358
	359	/* periodic timer for refresh */
6d0f6bcf	360	#define CONFIG_SYS_MAMR_PTA 124 /* start with divider for 64 MHz */
0f8c9768 WD	361
0f8c9768 WD	362	/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
6d0f6bcf	363	#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32 /* setting for 1 bank */
0f8c9768 WD	364
	365	/*
	366	* MAMR settings for SDRAM
	367	*/
	368
6d0f6bcf	369	#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
2535d602	370	MAMR_AMA_TYPE_0 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A11 \| \
0f8c9768 WD	371	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_8X)
	372
	373
	374	/*
	375	* Internal Definitions
	376	*
	377	* Boot Flags
	378	*/
	379	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	380	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	381
	382	#ifdef CONFIG_MPC860T
	383
	384	/* Interrupt level assignments.
	385	*/
	386	#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
	387
	388	#endif /* CONFIG_MPC860T */
	389
	390
	391	#endif /* __CONFIG_H */