[people/ms/u-boot.git] / include / configs / IDS8247.h

/*
 * (C) Copyright 2005
 * Heiko Schocher, DENX Software Engineering, <hs@denx.de>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC8260		1	/* This is a MPC8260 CPU		*/
#define CONFIG_MPC8272_FAMILY	1
#define CONFIG_IDS8247		1
#define CPU_ID_STR		"MPC8247"
#define CONFIG_CPM2		1	/* Has a CPM2 */

#define	CONFIG_SYS_TEXT_BASE	0xfff00000

#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/

#define	CONFIG_BOOTCOUNT_LIMIT

#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"

#undef	CONFIG_BOOTARGS

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw "			\
	"console=ttyS0,115200\0"					\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"flash_nfs=run nfsargs addip;"					\
		"bootm ${kernel_addr}\0"				\
	"flash_self=run ramargs addip;"					\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
	"rootpath=/opt/eldk/ppc_82xx\0"					\
	"bootfile=/tftpboot/IDS8247/uImage\0"				\
	"kernel_addr=ff800000\0"					\
	"ramdisk_addr=ffa00000\0"					\
	""
#define CONFIG_BOOTCOMMAND	"run flash_self"

#define CONFIG_MISC_INIT_R	1

/* enable I2C and select the hardware/software driver */
#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
#define CONFIG_SYS_I2C_SLAVE		0x7F

/*
 * Software (bit-bang) I2C driver configuration
 */

#define I2C_PORT	0		/* Port A=0, B=1, C=2, D=3 */
#define I2C_ACTIVE	(iop->pdir |=  0x00000080)
#define I2C_TRISTATE	(iop->pdir &= ~0x00000080)
#define I2C_READ	((iop->pdat & 0x00000080) != 0)
#define I2C_SDA(bit)	if(bit) iop->pdat |=  0x00000080; \
			else    iop->pdat &= ~0x00000080
#define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00000100; \
			else    iop->pdat &= ~0x00000100
#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */

#if 0
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */

#define CONFIG_I2C_X
#endif

/*
 * select serial console configuration
 * use the extern UART for the console
 */
#define	CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE		115200
/*
 * NS16550 Configuration
 */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL

#define CONFIG_SYS_NS16550_REG_SIZE    1

#define CONFIG_SYS_NS16550_CLK         14745600

#define	CONFIG_SYS_UART_BASE	0xE0000000
#define CONFIG_SYS_UART_SIZE	0x10000

#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_UART_BASE + 0x8000)


/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT	1
#define CONFIG_OF_BOARD_SETUP	1

#define OF_TBCLK	(bd->bi_busfreq / 4)
#define OF_STDOUT_PATH	"/soc@f0000000/serial8250@e0008000"


/*
 * select ethernet configuration
 *
 * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
 * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
 * for FCC)
 *
 * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
 * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
 */
#undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC       */
#define	CONFIG_ETHER_ON_FCC		/* define if ether on FCC       */
#undef	CONFIG_ETHER_NONE		/* define if ether on something else */
#define	CONFIG_ETHER_INDEX	1	/* which SCC/FCC channel for ethernet */
#define CONFIG_ETHER_ON_FCC1
#define FCC_ENET

/*
 * - Rx-CLK is CLK10
 * - Tx-CLK is CLK9
 * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
 * - Enable Full Duplex in FSMR
 */
# define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
# define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK9)
# define CONFIG_SYS_CPMFCR_RAMTYPE	0
# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)


/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
#define CONFIG_8260_CLKIN	66666666	/* in Hz */

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

#define	CONFIG_TIMESTAMP		/* Print image info with timestamp */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE

#define CONFIG_RTC_PCF8563
#define CONFIG_SYS_I2C_RTC_ADDR		0x51

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NFS
#define CONFIG_CMD_NAND
#define CONFIG_CMD_I2C
#define CONFIG_CMD_SNTP


/*
 * Miscellaneous configurable options
 */
#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define	CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address	*/

#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

#define	CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */

#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible  */
#define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
#define CONFIG_SYS_FLASH_BANKS_LIST	{ 0xFF800000 }
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	      */
/* What should the base address of the main FLASH be and how big is
 * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/ids8247/config.mk
 * The main FLASH is whichever is connected to *CS0.
 */
#define CONFIG_SYS_FLASH0_BASE 0xFFF00000
#define CONFIG_SYS_FLASH0_SIZE 8

/* Flash bank size (for preliminary settings)
 */
#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */

#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */

/* Environment in flash */
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+0x60000)
#define CONFIG_ENV_SIZE		0x20000
#define CONFIG_ENV_SECT_SIZE	0x20000

/*-----------------------------------------------------------------------
 * NAND-FLASH stuff
 *-----------------------------------------------------------------------
 */
#if defined(CONFIG_CMD_NAND)

#define CONFIG_SYS_NAND0_BASE 0xE1000000
#define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices           */

#endif /* CONFIG_CMD_NAND */

/*-----------------------------------------------------------------------
 * Hard Reset Configuration Words
 *
 * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
 * defines for the various registers affected by the HRCW e.g. changing
 * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
 */
#define CONFIG_SYS_HRCW_MASTER	(HRCW_BPS01 | HRCW_BMS | HRCW_ISB100 | HRCW_APPC10 | HRCW_MODCK_H1000)

/* no slaves so just fill with zeros */
#define CONFIG_SYS_HRCW_SLAVE1		0
#define CONFIG_SYS_HRCW_SLAVE2		0
#define CONFIG_SYS_HRCW_SLAVE3		0
#define CONFIG_SYS_HRCW_SLAVE4		0
#define CONFIG_SYS_HRCW_SLAVE5		0
#define CONFIG_SYS_HRCW_SLAVE6		0
#define CONFIG_SYS_HRCW_SLAVE7		0

/*-----------------------------------------------------------------------
 * Internal Memory Mapped Register
 */
#define CONFIG_SYS_IMMR		0xF0000000

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
#define CONFIG_SYS_INIT_RAM_SIZE	0x2000  /* Size of used area in DPRAM    */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 *
 * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE
 */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH0_BASE
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
#endif

/*-----------------------------------------------------------------------
 * HIDx - Hardware Implementation-dependent Registers                    2-11
 *-----------------------------------------------------------------------
 * HID0 also contains cache control - initially enable both caches and
 * invalidate contents, then the final state leaves only the instruction
 * cache enabled. Note that Power-On and Hard reset invalidate the caches,
 * but Soft reset does not.
 *
 * HID1 has only read-only information - nothing to set.
 */

#define CONFIG_SYS_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
#define CONFIG_SYS_HID0_FINAL  0
#define CONFIG_SYS_HID2        0

/*-----------------------------------------------------------------------
 * RMR - Reset Mode Register                                     5-5
 *-----------------------------------------------------------------------
 * turn on Checkstop Reset Enable
 */
#define CONFIG_SYS_RMR         0

/*-----------------------------------------------------------------------
 * BCR - Bus Configuration                                       4-25
 *-----------------------------------------------------------------------
 */
#define CONFIG_SYS_BCR		0

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration                             4-31
 *-----------------------------------------------------------------------
 */
#define CONFIG_SYS_SIUMCR      (SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_BCTLC01)

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control                             4-35
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
 */
#if defined(CONFIG_WATCHDOG)
#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
#else
#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
			 SYPCR_SWRI|SYPCR_SWP)
#endif /* CONFIG_WATCHDOG */

/*-----------------------------------------------------------------------
 * TMCNTSC - Time Counter Status and Control                     4-40
 *-----------------------------------------------------------------------
 * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
 * and enable Time Counter
 */
#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control                 4-42
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
 * Periodic timer
 */
#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)

/*-----------------------------------------------------------------------
 * SCCR - System Clock Control                                   9-8
 *-----------------------------------------------------------------------
 * Ensure DFBRG is Divide by 16
 */
#define CONFIG_SYS_SCCR        (0x00000028 | SCCR_DFBRG01)

/*-----------------------------------------------------------------------
 * RCCR - RISC Controller Configuration                         13-7
 *-----------------------------------------------------------------------
 */
#define CONFIG_SYS_RCCR        0

/*
 * Init Memory Controller:
 *
 * Bank Bus     Machine PortSz  Device
 * ---- ---     ------- ------  ------
 *  0   60x     GPCM    16 bit  FLASH
 *  1   60x     GPCM     8 bit  NAND
 *  2   60x     SDRAM   32 bit  SDRAM
 *  3   60x     GPCM     8 bit  UART
 *
 */

#define SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/

/* Minimum mask to separate preliminary
 * address ranges for CS[0:2]
 */
#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(32<<20)	/* less than 32 MB */

#define CONFIG_SYS_MPTPR       0x6600

/*-----------------------------------------------------------------------------
 * Address for Mode Register Set (MRS) command
 *-----------------------------------------------------------------------------
 */
#define CONFIG_SYS_MRS_OFFS	0x00000110


/* Bank 0 - FLASH
 */
#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)  |\
			 BRx_PS_8                       |\
			 BRx_MS_GPCM_P                  |\
			 BRx_V)

#define CONFIG_SYS_OR0_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE)      |\
			 ORxG_SCY_6_CLK                 )

#if defined(CONFIG_CMD_NAND)
/* Bank 1 - NAND Flash
*/
#define	CONFIG_SYS_NAND_BASE		CONFIG_SYS_NAND0_BASE
#define	CONFIG_SYS_NAND_SIZE		0x8000

#define CONFIG_SYS_OR_TIMING_NAND	0x000036

#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_NAND_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V  )
#define CONFIG_SYS_OR1_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_NAND_SIZE) | CONFIG_SYS_OR_TIMING_NAND )
#endif

/* Bank 2 - 60x bus SDRAM
 */
#define CONFIG_SYS_PSRT        0x20
#define CONFIG_SYS_LSRT        0x20

#define CONFIG_SYS_BR2_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
			 BRx_PS_32                      |\
			 BRx_MS_SDRAM_P                 |\
			 BRx_V)

#define CONFIG_SYS_OR2_PRELIM	CONFIG_SYS_OR2


/* SDRAM initialization values
*/
#define CONFIG_SYS_OR2    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
			 ORxS_BPD_4                     |\
			 ORxS_ROWST_PBI0_A9		|\
			 ORxS_NUMR_12)

#define CONFIG_SYS_PSDMR  (PSDMR_SDAM_A14_IS_A5 |\
			 PSDMR_BSMA_A15_A17           |\
			 PSDMR_SDA10_PBI0_A10		|\
			 PSDMR_RFRC_5_CLK               |\
			 PSDMR_PRETOACT_2W              |\
			 PSDMR_ACTTORW_2W               |\
			 PSDMR_BL                       |\
			 PSDMR_LDOTOPRE_2C              |\
			 PSDMR_WRC_3C                   |\
			 PSDMR_CL_3)

/* Bank 3 - UART
*/

#define CONFIG_SYS_BR3_PRELIM  ((CONFIG_SYS_UART_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V  )
#define CONFIG_SYS_OR3_PRELIM  (((-CONFIG_SYS_UART_SIZE) & ORxG_AM_MSK) | ORxG_CSNT | ORxG_SCY_1_CLK | ORxG_TRLX )

#endif	/* __CONFIG_H */
Commit	Line	Data
9dd41a7b WD	1	/*
	2	* (C) Copyright 2005
	3	* Heiko Schocher, DENX Software Engineering, <hs@denx.de>
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
	35
	36	#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */
	37	#define CONFIG_MPC8272_FAMILY 1
	38	#define CONFIG_IDS8247 1
	39	#define CPU_ID_STR "MPC8247"
9c4c5ae3	40	#define CONFIG_CPM2 1 /* Has a CPM2 */
9dd41a7b	41
2ae18241 WD	42	#define CONFIG_SYS_TEXT_BASE 0xfff00000
2ae18241 WD	43
9dd41a7b WD	44	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	45
	46	#define CONFIG_BOOTCOUNT_LIMIT
	47
32bf3d14	48	#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
9dd41a7b WD	49
	50	#undef CONFIG_BOOTARGS
	51
	52	#define CONFIG_EXTRA_ENV_SETTINGS \
	53	"netdev=eth0\0" \
	54	"nfsargs=setenv bootargs root=/dev/nfs rw " \
fe126d8b	55	"nfsroot=${serverip}:${rootpath}\0" \
9dd41a7b WD	56	"ramargs=setenv bootargs root=/dev/ram rw " \
9dd41a7b WD	57	"console=ttyS0,115200\0" \
fe126d8b WD	58	"addip=setenv bootargs ${bootargs} " \
	59	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	60	":${hostname}:${netdev}:off panic=1\0" \
9dd41a7b	61	"flash_nfs=run nfsargs addip;" \
fe126d8b	62	"bootm ${kernel_addr}\0" \
9dd41a7b	63	"flash_self=run ramargs addip;" \
fe126d8b WD	64	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
fe126d8b WD	65	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
9dd41a7b WD	66	"rootpath=/opt/eldk/ppc_82xx\0" \
	67	"bootfile=/tftpboot/IDS8247/uImage\0" \
	68	"kernel_addr=ff800000\0" \
	69	"ramdisk_addr=ffa00000\0" \
	70	""
	71	#define CONFIG_BOOTCOMMAND "run flash_self"
	72
	73	#define CONFIG_MISC_INIT_R 1
	74
	75	/* enable I2C and select the hardware/software driver */
	76	#undef CONFIG_HARD_I2C /* I2C with hardware support */
	77	#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
6d0f6bcf JCPV	78	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
6d0f6bcf JCPV	79	#define CONFIG_SYS_I2C_SLAVE 0x7F
9dd41a7b WD	80
	81	/*
	82	* Software (bit-bang) I2C driver configuration
	83	*/
	84
	85	#define I2C_PORT 0 /* Port A=0, B=1, C=2, D=3 */
	86	#define I2C_ACTIVE (iop->pdir \|= 0x00000080)
	87	#define I2C_TRISTATE (iop->pdir &= ~0x00000080)
	88	#define I2C_READ ((iop->pdat & 0x00000080) != 0)
	89	#define I2C_SDA(bit) if(bit) iop->pdat \|= 0x00000080; \
	90	else iop->pdat &= ~0x00000080
	91	#define I2C_SCL(bit) if(bit) iop->pdat \|= 0x00000100; \
	92	else iop->pdat &= ~0x00000100
	93	#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
	94
	95	#if 0
6d0f6bcf JCPV	96	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	97	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	98	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
	99	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
9dd41a7b WD	100
	101	#define CONFIG_I2C_X
	102	#endif
	103
	104	/*
	105	* select serial console configuration
	106	* use the extern UART for the console
	107	*/
	108	#define CONFIG_CONS_INDEX 1
	109	#define CONFIG_BAUDRATE 115200
	110	/*
	111	* NS16550 Configuration
	112	*/
6d0f6bcf JCPV	113	#define CONFIG_SYS_NS16550
6d0f6bcf JCPV	114	#define CONFIG_SYS_NS16550_SERIAL
9dd41a7b	115
6d0f6bcf	116	#define CONFIG_SYS_NS16550_REG_SIZE 1
9dd41a7b	117
6d0f6bcf	118	#define CONFIG_SYS_NS16550_CLK 14745600
9dd41a7b	119
6d0f6bcf JCPV	120	#define CONFIG_SYS_UART_BASE 0xE0000000
6d0f6bcf JCPV	121	#define CONFIG_SYS_UART_SIZE 0x10000
9dd41a7b	122
6d0f6bcf	123	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_UART_BASE + 0x8000)
9dd41a7b	124
6abd82e1 SS	125
	126	/* pass open firmware flat tree */
	127	#define CONFIG_OF_LIBFDT 1
	128	#define CONFIG_OF_BOARD_SETUP 1
	129
6abd82e1 SS	130	#define OF_TBCLK (bd->bi_busfreq / 4)
	131	#define OF_STDOUT_PATH "/soc@f0000000/serial8250@e0008000"
	132
	133
9dd41a7b WD	134	/*
	135	* select ethernet configuration
	136	*
	137	* if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
	138	* CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
	139	* for FCC)
	140	*
	141	* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
639221c7	142	* defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
9dd41a7b WD	143	*/
	144	#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
	145	#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
	146	#undef CONFIG_ETHER_NONE /* define if ether on something else */
6abd82e1 SS	147	#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */
	148	#define CONFIG_ETHER_ON_FCC1
	149	#define FCC_ENET
9dd41a7b WD	150
9dd41a7b WD	151	/*
6abd82e1 SS	152	* - Rx-CLK is CLK10
6abd82e1 SS	153	* - Tx-CLK is CLK9
9dd41a7b WD	154	* - RAM for BD/Buffers is on the 60x Bus (see 28-13)
	155	* - Enable Full Duplex in FSMR
	156	*/
d4590da4 MF	157	# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1\|CMXFCR_RF1CS_MSK\|CMXFCR_TF1CS_MSK)
d4590da4 MF	158	# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10\|CMXFCR_TF1CS_CLK9)
6d0f6bcf JCPV	159	# define CONFIG_SYS_CPMFCR_RAMTYPE 0
6d0f6bcf JCPV	160	# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE\|FCC_PSMR_LPB)
9dd41a7b WD	161
	162
	163	/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
	164	#define CONFIG_8260_CLKIN 66666666 /* in Hz */
	165
	166	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	167	#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
9dd41a7b WD	168
	169	#undef CONFIG_WATCHDOG /* watchdog disabled */
	170
	171	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	172
7be044e4 JL	173	/*
	174	* BOOTP options
	175	*/
	176	#define CONFIG_BOOTP_SUBNETMASK
	177	#define CONFIG_BOOTP_GATEWAY
	178	#define CONFIG_BOOTP_HOSTNAME
	179	#define CONFIG_BOOTP_BOOTPATH
	180	#define CONFIG_BOOTP_BOOTFILESIZE
9dd41a7b	181
6abd82e1	182	#define CONFIG_RTC_PCF8563
6d0f6bcf	183	#define CONFIG_SYS_I2C_RTC_ADDR 0x51
9dd41a7b	184
348f258f JL	185	/*
	186	* Command line configuration.
	187	*/
	188	#include <config_cmd_default.h>
	189
	190	#define CONFIG_CMD_DHCP
	191	#define CONFIG_CMD_NFS
	192	#define CONFIG_CMD_NAND
	193	#define CONFIG_CMD_I2C
	194	#define CONFIG_CMD_SNTP
	195
9dd41a7b WD	196
	197	/*
	198	* Miscellaneous configurable options
	199	*/
6d0f6bcf JCPV	200	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	201	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
348f258f	202	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	203	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
9dd41a7b	204	#else
6d0f6bcf	205	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
9dd41a7b	206	#endif
6d0f6bcf JCPV	207	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	208	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	209	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
9dd41a7b	210
6d0f6bcf JCPV	211	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	212	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
9dd41a7b	213
6d0f6bcf	214	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
9dd41a7b	215
6d0f6bcf	216	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
9dd41a7b	217
6d0f6bcf	218	#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
9dd41a7b WD	219
	220	/*
	221	* For booting Linux, the board info and command line data
	222	* have to be in the first 8 MB of memory, since this is
	223	* the maximum mapped by the Linux kernel during initialization.
	224	*/
6d0f6bcf	225	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
9dd41a7b	226
6d0f6bcf	227	#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
00b1883a	228	#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
6d0f6bcf	229	#define CONFIG_SYS_FLASH_BANKS_LIST { 0xFF800000 }
ca5def3f	230	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
9dd41a7b	231	/* What should the base address of the main FLASH be and how big is
14d0a02a	232	* it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/ids8247/config.mk
9dd41a7b WD	233	* The main FLASH is whichever is connected to *CS0.
9dd41a7b WD	234	*/
6d0f6bcf JCPV	235	#define CONFIG_SYS_FLASH0_BASE 0xFFF00000
6d0f6bcf JCPV	236	#define CONFIG_SYS_FLASH0_SIZE 8
9dd41a7b WD	237
	238	/* Flash bank size (for preliminary settings)
	239	*/
6d0f6bcf	240	#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
9dd41a7b WD	241
	242	/*-----------------------------------------------------------------------
	243	* FLASH organization
	244	*/
6d0f6bcf	245	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
9dd41a7b	246
6d0f6bcf JCPV	247	#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
6d0f6bcf JCPV	248	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
9dd41a7b WD	249
9dd41a7b WD	250	/* Environment in flash */
5a1aceb0	251	#define CONFIG_ENV_IS_IN_FLASH 1
6d0f6bcf	252	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x60000)
0e8d1586 JCPV	253	#define CONFIG_ENV_SIZE 0x20000
0e8d1586 JCPV	254	#define CONFIG_ENV_SECT_SIZE 0x20000
9dd41a7b WD	255
	256	/*-----------------------------------------------------------------------
	257	* NAND-FLASH stuff
	258	*-----------------------------------------------------------------------
	259	*/
348f258f	260	#if defined(CONFIG_CMD_NAND)
9dd41a7b	261
6d0f6bcf	262	#define CONFIG_SYS_NAND0_BASE 0xE1000000
6d0f6bcf	263	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
9dd41a7b	264
11799434	265	#endif /* CONFIG_CMD_NAND */
9dd41a7b WD	266
	267	/*-----------------------------------------------------------------------
	268	* Hard Reset Configuration Words
	269	*
6d0f6bcf	270	* if you change bits in the HRCW, you must also change the CONFIG_SYS_*
9dd41a7b	271	* defines for the various registers affected by the HRCW e.g. changing
6d0f6bcf	272	* HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
9dd41a7b	273	*/
6d0f6bcf	274	#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS01 \| HRCW_BMS \| HRCW_ISB100 \| HRCW_APPC10 \| HRCW_MODCK_H1000)
9dd41a7b WD	275
9dd41a7b WD	276	/* no slaves so just fill with zeros */
6d0f6bcf JCPV	277	#define CONFIG_SYS_HRCW_SLAVE1 0
	278	#define CONFIG_SYS_HRCW_SLAVE2 0
	279	#define CONFIG_SYS_HRCW_SLAVE3 0
	280	#define CONFIG_SYS_HRCW_SLAVE4 0
	281	#define CONFIG_SYS_HRCW_SLAVE5 0
	282	#define CONFIG_SYS_HRCW_SLAVE6 0
	283	#define CONFIG_SYS_HRCW_SLAVE7 0
9dd41a7b WD	284
	285	/*-----------------------------------------------------------------------
	286	* Internal Memory Mapped Register
	287	*/
6d0f6bcf	288	#define CONFIG_SYS_IMMR 0xF0000000
9dd41a7b WD	289
	290	/*-----------------------------------------------------------------------
	291	* Definitions for initial stack pointer and data area (in DPRAM)
	292	*/
6d0f6bcf	293	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
553f0982	294	#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */
25ddd1fb	295	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
6d0f6bcf	296	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
9dd41a7b WD	297
	298	/*-----------------------------------------------------------------------
	299	* Start addresses for the final memory configuration
	300	* (Set up by the startup code)
6d0f6bcf	301	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
9dd41a7b	302	*
6d0f6bcf	303	* 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE
9dd41a7b	304	*/
6d0f6bcf JCPV	305	#define CONFIG_SYS_SDRAM_BASE 0x00000000
6d0f6bcf JCPV	306	#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
14d0a02a	307	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
6d0f6bcf JCPV	308	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
6d0f6bcf JCPV	309	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
9dd41a7b	310
9dd41a7b WD	311	/*-----------------------------------------------------------------------
	312	* Cache Configuration
	313	*/
6d0f6bcf	314	#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
348f258f	315	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	316	# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
9dd41a7b WD	317	#endif
	318
	319	/*-----------------------------------------------------------------------
	320	* HIDx - Hardware Implementation-dependent Registers 2-11
	321	*-----------------------------------------------------------------------
	322	* HID0 also contains cache control - initially enable both caches and
	323	* invalidate contents, then the final state leaves only the instruction
	324	* cache enabled. Note that Power-On and Hard reset invalidate the caches,
	325	* but Soft reset does not.
	326	*
	327	* HID1 has only read-only information - nothing to set.
	328	*/
	329
6d0f6bcf JCPV	330	#define CONFIG_SYS_HID0_INIT (HID0_ICE\|HID0_DCE\|HID0_ICFI\|HID0_DCI)
	331	#define CONFIG_SYS_HID0_FINAL 0
	332	#define CONFIG_SYS_HID2 0
9dd41a7b WD	333
	334	/*-----------------------------------------------------------------------
	335	* RMR - Reset Mode Register 5-5
	336	*-----------------------------------------------------------------------
	337	* turn on Checkstop Reset Enable
	338	*/
6d0f6bcf	339	#define CONFIG_SYS_RMR 0
9dd41a7b WD	340
	341	/*-----------------------------------------------------------------------
	342	* BCR - Bus Configuration 4-25
	343	*-----------------------------------------------------------------------
	344	*/
6d0f6bcf	345	#define CONFIG_SYS_BCR 0
9dd41a7b WD	346
	347	/*-----------------------------------------------------------------------
	348	* SIUMCR - SIU Module Configuration 4-31
	349	*-----------------------------------------------------------------------
	350	*/
6d0f6bcf	351	#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC00\|SIUMCR_APPC10\|SIUMCR_BCTLC01)
9dd41a7b WD	352
	353	/*-----------------------------------------------------------------------
	354	* SYPCR - System Protection Control 4-35
	355	* SYPCR can only be written once after reset!
	356	*-----------------------------------------------------------------------
	357	* Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
	358	*/
	359	#if defined(CONFIG_WATCHDOG)
6d0f6bcf	360	#define CONFIG_SYS_SYPCR (SYPCR_SWTC\|SYPCR_BMT\|SYPCR_PBME\|SYPCR_LBME\|\
9dd41a7b WD	361	SYPCR_SWRI\|SYPCR_SWP\|SYPCR_SWE)
9dd41a7b WD	362	#else
6d0f6bcf	363	#define CONFIG_SYS_SYPCR (SYPCR_SWTC\|SYPCR_BMT\|SYPCR_PBME\|SYPCR_LBME\|\
9dd41a7b WD	364	SYPCR_SWRI\|SYPCR_SWP)
	365	#endif /* CONFIG_WATCHDOG */
	366
	367	/*-----------------------------------------------------------------------
	368	* TMCNTSC - Time Counter Status and Control 4-40
	369	*-----------------------------------------------------------------------
	370	* Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
	371	* and enable Time Counter
	372	*/
6d0f6bcf	373	#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC\|TMCNTSC_ALR\|TMCNTSC_TCF\|TMCNTSC_TCE)
9dd41a7b WD	374
	375	/*-----------------------------------------------------------------------
	376	* PISCR - Periodic Interrupt Status and Control 4-42
	377	*-----------------------------------------------------------------------
	378	* Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
	379	* Periodic timer
	380	*/
6d0f6bcf	381	#define CONFIG_SYS_PISCR (PISCR_PS\|PISCR_PTF\|PISCR_PTE)
9dd41a7b WD	382
	383	/*-----------------------------------------------------------------------
	384	* SCCR - System Clock Control 9-8
	385	*-----------------------------------------------------------------------
	386	* Ensure DFBRG is Divide by 16
	387	*/
6d0f6bcf	388	#define CONFIG_SYS_SCCR (0x00000028 \| SCCR_DFBRG01)
9dd41a7b WD	389
	390	/*-----------------------------------------------------------------------
	391	* RCCR - RISC Controller Configuration 13-7
	392	*-----------------------------------------------------------------------
	393	*/
6d0f6bcf	394	#define CONFIG_SYS_RCCR 0
9dd41a7b WD	395
	396	/*
	397	* Init Memory Controller:
	398	*
	399	* Bank Bus Machine PortSz Device
	400	* ---- --- ------- ------ ------
	401	* 0 60x GPCM 16 bit FLASH
	402	* 1 60x GPCM 8 bit NAND
	403	* 2 60x SDRAM 32 bit SDRAM
	404	* 3 60x GPCM 8 bit UART
	405	*
	406	*/
	407
	408	#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
	409
	410	/* Minimum mask to separate preliminary
	411	* address ranges for CS[0:2]
	412	*/
6d0f6bcf	413	#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (32<<20) /* less than 32 MB */
9dd41a7b	414
6d0f6bcf	415	#define CONFIG_SYS_MPTPR 0x6600
9dd41a7b WD	416
	417	/*-----------------------------------------------------------------------------
	418	* Address for Mode Register Set (MRS) command
	419	*-----------------------------------------------------------------------------
	420	*/
6d0f6bcf	421	#define CONFIG_SYS_MRS_OFFS 0x00000110
9dd41a7b WD	422
	423
	424	/* Bank 0 - FLASH
	425	*/
6d0f6bcf	426	#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) \|\
9dd41a7b WD	427	BRx_PS_8 \|\
	428	BRx_MS_GPCM_P \|\
	429	BRx_V)
	430
6d0f6bcf	431	#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \|\
9dd41a7b WD	432	ORxG_SCY_6_CLK )
9dd41a7b WD	433
348f258f	434	#if defined(CONFIG_CMD_NAND)
9dd41a7b WD	435	/* Bank 1 - NAND Flash
9dd41a7b WD	436	*/
6d0f6bcf JCPV	437	#define CONFIG_SYS_NAND_BASE CONFIG_SYS_NAND0_BASE
6d0f6bcf JCPV	438	#define CONFIG_SYS_NAND_SIZE 0x8000
9dd41a7b	439
6d0f6bcf	440	#define CONFIG_SYS_OR_TIMING_NAND 0x000036
9dd41a7b	441
6d0f6bcf JCPV	442	#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_NAND_BASE & BRx_BA_MSK) \| BRx_PS_8 \| BRx_MS_GPCM_P \| BRx_V )
6d0f6bcf JCPV	443	#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(CONFIG_SYS_NAND_SIZE) \| CONFIG_SYS_OR_TIMING_NAND )
9dd41a7b WD	444	#endif
	445
	446	/* Bank 2 - 60x bus SDRAM
	447	*/
6d0f6bcf JCPV	448	#define CONFIG_SYS_PSRT 0x20
6d0f6bcf JCPV	449	#define CONFIG_SYS_LSRT 0x20
9dd41a7b	450
6d0f6bcf	451	#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) \|\
9dd41a7b WD	452	BRx_PS_32 \|\
	453	BRx_MS_SDRAM_P \|\
	454	BRx_V)
	455
6d0f6bcf	456	#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_OR2
9dd41a7b WD	457
	458
	459	/* SDRAM initialization values
	460	*/
6d0f6bcf	461	#define CONFIG_SYS_OR2 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) \|\
9dd41a7b	462	ORxS_BPD_4 \|\
6abd82e1	463	ORxS_ROWST_PBI0_A9 \|\
9dd41a7b WD	464	ORxS_NUMR_12)
9dd41a7b WD	465
6d0f6bcf	466	#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 \|\
9dd41a7b	467	PSDMR_BSMA_A15_A17 \|\
6abd82e1	468	PSDMR_SDA10_PBI0_A10 \|\
9dd41a7b WD	469	PSDMR_RFRC_5_CLK \|\
	470	PSDMR_PRETOACT_2W \|\
	471	PSDMR_ACTTORW_2W \|\
	472	PSDMR_BL \|\
	473	PSDMR_LDOTOPRE_2C \|\
	474	PSDMR_WRC_3C \|\
	475	PSDMR_CL_3)
	476
	477	/* Bank 3 - UART
	478	*/
	479
6d0f6bcf JCPV	480	#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_UART_BASE & BRx_BA_MSK) \| BRx_PS_8 \| BRx_MS_GPCM_P \| BRx_V )
6d0f6bcf JCPV	481	#define CONFIG_SYS_OR3_PRELIM (((-CONFIG_SYS_UART_SIZE) & ORxG_AM_MSK) \| ORxG_CSNT \| ORxG_SCY_1_CLK \| ORxG_TRLX )
9dd41a7b WD	482
9dd41a7b WD	483	#endif /* __CONFIG_H */