[people/ms/u-boot.git] / include / configs / M54418TWR.h

/*
 * Configuation settings for the Freescale MCF54418 TWR board.
 *
 * Copyright 2010-2012 Freescale Semiconductor, Inc.
 * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef _M54418TWR_H
#define _M54418TWR_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_M54418TWR	/* M54418TWR board */

#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT		(0)
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }

#define LDS_BOARD_TEXT			board/freescale/m54418twr/sbf_dram_init.o (.text*)

#undef CONFIG_WATCHDOG

#define CONFIG_TIMESTAMP	/* Print image info with timestamp */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * NAND FLASH
 */
#ifdef CONFIG_CMD_NAND
#define CONFIG_JFFS2_NAND
#define CONFIG_NAND_FSL_NFC
#define CONFIG_SYS_NAND_BASE		0xFC0FC000
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define NAND_MAX_CHIPS			CONFIG_SYS_MAX_NAND_DEVICE
#define CONFIG_SYS_NAND_SELECT_DEVICE
#endif

/* Network configuration */
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
#define CONFIG_MII			1
#define CONFIG_MII_INIT		1
#define CONFIG_SYS_DISCOVER_PHY
#define CONFIG_SYS_RX_ETH_BUFFER	2
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#define CONFIG_SYS_TX_ETH_BUFFER	2
#define CONFIG_HAS_ETH1

#define CONFIG_SYS_FEC0_PINMUX		0
#define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
#define CONFIG_SYS_FEC1_PINMUX		0
#define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC0_MIIBASE
#define MCFFEC_TOUT_LOOP		50000
#define CONFIG_SYS_FEC0_PHYADDR	0
#define CONFIG_SYS_FEC1_PHYADDR	1

#define CONFIG_ETHPRIME	"FEC0"
#define CONFIG_IPADDR		192.168.1.2
#define CONFIG_NETMASK		255.255.255.0
#define CONFIG_SERVERIP	192.168.1.1
#define CONFIG_GATEWAYIP	192.168.1.1

#define CONFIG_SYS_FEC_BUF_USE_SRAM
/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
#ifndef CONFIG_SYS_DISCOVER_PHY
#define FECDUPLEX	FULL
#define FECSPEED	_100BASET
#define LINKSTATUS	1
#else
#define LINKSTATUS	0
#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#endif
#endif			/* CONFIG_SYS_DISCOVER_PHY */
#endif

#define CONFIG_HOSTNAME		M54418TWR

#if defined(CONFIG_CF_SBF)
/* ST Micro serial flash */
#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"netdev=eth0\0"				\
	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
	"loadaddr=0x40010000\0"			\
	"sbfhdr=sbfhdr.bin\0"			\
	"uboot=u-boot.bin\0"			\
	"load=tftp ${loadaddr} ${sbfhdr};"	\
	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
	"upd=run load; run prog\0"		\
	"prog=sf probe 0:1 1000000 3;"		\
	"sf erase 0 40000;"			\
	"sf write ${loadaddr} 0 40000;"		\
	"save\0"				\
	""
#elif defined(CONFIG_SYS_NAND_BOOT)
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"netdev=eth0\0"				\
	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
	"loadaddr=0x40010000\0"			\
	"u-boot=u-boot.bin\0"			\
	"load=tftp ${loadaddr} ${u-boot};\0"	\
	"upd=run load; run prog\0"		\
	"prog=nand device 0;"			\
	"nand erase 0 40000;"			\
	"nb_update ${loadaddr} ${filesize};"	\
	"save\0"				\
	""
#else
#define CONFIG_SYS_UBOOT_END	0x3FFFF
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"netdev=eth0\0"				\
	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
	"loadaddr=40010000\0"			\
	"u-boot=u-boot.bin\0"			\
	"load=tftp ${loadaddr) ${u-boot}\0"	\
	"upd=run load; run prog\0"		\
	"prog=prot off mram" " ;"	\
	"cp.b ${loadaddr} 0 ${filesize};"	\
	"save\0"				\
	""
#endif

/* Realtime clock */
#undef CONFIG_MCFRTC
#define CONFIG_RTC_MCFRRTC
#define CONFIG_SYS_MCFRRTC_BASE		0xFC0A8000

/* Timer */
#define CONFIG_MCFTMR
#undef CONFIG_MCFPIT

/* I2c */
#undef CONFIG_SYS_FSL_I2C
#undef	CONFIG_SYS_I2C_SOFT	/* I2C bit-banged */
/* I2C speed and slave address  */
#define CONFIG_SYS_I2C_SPEED		80000
#define CONFIG_SYS_I2C_SLAVE		0x7F
#define CONFIG_SYS_I2C_OFFSET		0x58000
#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR

/* DSPI and Serial Flash */
#define CONFIG_CF_SPI
#define CONFIG_CF_DSPI
#define CONFIG_SERIAL_FLASH
#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE		0x7
#ifdef CONFIG_CMD_SPI

#	define CONFIG_SYS_DSPI_CTAR0	(DSPI_CTAR_TRSZ(7) | \
					 DSPI_CTAR_PCSSCK_1CLK | \
					 DSPI_CTAR_PASC(0) | \
					 DSPI_CTAR_PDT(0) | \
					 DSPI_CTAR_CSSCK(0) | \
					 DSPI_CTAR_ASC(0) | \
					 DSPI_CTAR_DT(1))
#	define CONFIG_SYS_DSPI_CTAR1	(CONFIG_SYS_DSPI_CTAR0)
#	define CONFIG_SYS_DSPI_CTAR2	(CONFIG_SYS_DSPI_CTAR0)
#endif

/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK

#define CONFIG_PRAM			2048	/* 2048 KB */

#define CONFIG_SYS_LONGHELP		/* undef to save memory */

#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)

#define CONFIG_SYS_MBAR		0xFC000000

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
/* End of used area in internal SRAM */
#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
#define CONFIG_SYS_INIT_RAM_CTRL	0x221
#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - \
					GENERATED_GBL_DATA_SIZE) - 32)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x40000000
#define CONFIG_SYS_SDRAM_SIZE		128	/* SDRAM size in MB */

#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + 0x400)
#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
#define CONFIG_SYS_DRAM_TEST

#if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT)
#define CONFIG_SERIAL_BOOT
#endif

#if defined(CONFIG_SERIAL_BOOT)
#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
#else
#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
#endif

#define CONFIG_SYS_BOOTPARAMS_LEN	(64 * 1024)
/* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
/* Reserve 256 kB for malloc() */
#define CONFIG_SYS_MALLOC_LEN		(256 << 10)

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization ??
 */
/* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \
				(CONFIG_SYS_SDRAM_SIZE << 20))

/* Configuration for environment
 * Environment is embedded in u-boot in the second sector of the flash
 */
#if !defined(CONFIG_SERIAL_BOOT)  /*MRAM boot*/
#define CONFIG_ENV_ADDR		(0x40000 - 0x1000) /*MRAM size 40000*/
#define CONFIG_ENV_SIZE		0x1000
#endif

#if defined(CONFIG_CF_SBF)
#define CONFIG_ENV_SPI_CS		1
#define CONFIG_ENV_OFFSET		0x40000
#define CONFIG_ENV_SIZE		0x2000
#define CONFIG_ENV_SECT_SIZE		0x10000
#endif
#if defined(CONFIG_SYS_NAND_BOOT)
#define CONFIG_ENV_OFFSET	0x80000
#define CONFIG_ENV_SIZE	0x20000
#define CONFIG_ENV_SECT_SIZE	0x20000
#endif
#undef CONFIG_ENV_OVERWRITE

/* FLASH organization */
#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE

#undef CONFIG_SYS_FLASH_CFI
#ifdef CONFIG_SYS_FLASH_CFI

#define CONFIG_FLASH_CFI_DRIVER	1
/* Max size that the board might have */
#define CONFIG_SYS_FLASH_SIZE		0x1000000
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
/* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_BANKS	1
/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT	270
/* "Real" (hardware) sectors protection */
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }
#else
/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT	270
/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS	0
#endif

/*
 * This is setting for JFFS2 support in u-boot.
 * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 */
#ifdef CONFIG_CMD_JFFS2
#define CONFIG_JFFS2_DEV		"nand0"
#define CONFIG_JFFS2_PART_OFFSET	(0x800000)
#define CONFIG_MTD_DEVICE

#endif

#ifdef CONFIG_CMD_UBI
#define CONFIG_MTD_DEVICE	/* needed for mtdparts command */
#define CONFIG_MTD_PARTITIONS	/* mtdparts and UBI support */
#endif
/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE	16
#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 8)
#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 4)
#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
					 CF_ACR_EN | CF_ACR_SM_ALL)
#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
					 CF_CACR_ICINVA | CF_CACR_EUSP)
#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
					 CF_CACR_DEC | CF_CACR_DDCM_P | \
					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)

#define CACR_STATUS	(CONFIG_SYS_INIT_RAM_ADDR + \
			CONFIG_SYS_INIT_RAM_SIZE - 12)

/*-----------------------------------------------------------------------
 * Memory bank definitions
 */
/*
 * CS0 - NOR Flash 16MB
 * CS1 - Available
 * CS2 - Available
 * CS3 - Available
 * CS4 - Available
 * CS5 - Available
 */

 /* Flash */
#define CONFIG_SYS_CS0_BASE		0x00000000
#define CONFIG_SYS_CS0_MASK		0x000F0101
#define CONFIG_SYS_CS0_CTRL		0x00001D60

#endif				/* _M54418TWR_H */
Commit	Line	Data
186fc4db AW	1	/*
	2	* Configuation settings for the Freescale MCF54418 TWR board.
	3	*
	4	* Copyright 2010-2012 Freescale Semiconductor, Inc.
	5	* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
	6	*
3765b3e7	7	* SPDX-License-Identifier: GPL-2.0+
186fc4db AW	8	*/
	9
	10	/*
	11	* board/config.h - configuration options, board specific
	12	*/
	13
	14	#ifndef _M54418TWR_H
	15	#define _M54418TWR_H
	16
	17	/*
	18	* High Level Configuration Options
	19	* (easy to change)
	20	*/
186fc4db AW	21	#define CONFIG_M54418TWR /* M54418TWR board */
	22
	23	#define CONFIG_MCFUART
	24	#define CONFIG_SYS_UART_PORT (0)
186fc4db AW	25	#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
186fc4db AW	26
c74dda8b AD	27	#define LDS_BOARD_TEXT board/freescale/m54418twr/sbf_dram_init.o (.text*)
c74dda8b AD	28
186fc4db AW	29	#undef CONFIG_WATCHDOG
	30
	31	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	32
	33	/*
	34	* BOOTP options
	35	*/
	36	#define CONFIG_BOOTP_BOOTFILESIZE
	37	#define CONFIG_BOOTP_BOOTPATH
	38	#define CONFIG_BOOTP_GATEWAY
	39	#define CONFIG_BOOTP_HOSTNAME
	40
186fc4db AW	41	/*
	42	* NAND FLASH
	43	*/
	44	#ifdef CONFIG_CMD_NAND
	45	#define CONFIG_JFFS2_NAND
	46	#define CONFIG_NAND_FSL_NFC
	47	#define CONFIG_SYS_NAND_BASE 0xFC0FC000
	48	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	49	#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
	50	#define CONFIG_SYS_NAND_SELECT_DEVICE
186fc4db AW	51	#endif
	52
	53	/* Network configuration */
	54	#define CONFIG_MCFFEC
	55	#ifdef CONFIG_MCFFEC
186fc4db AW	56	#define CONFIG_MII 1
	57	#define CONFIG_MII_INIT 1
	58	#define CONFIG_SYS_DISCOVER_PHY
	59	#define CONFIG_SYS_RX_ETH_BUFFER 2
e34b913a	60	#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
186fc4db AW	61	#define CONFIG_SYS_TX_ETH_BUFFER 2
	62	#define CONFIG_HAS_ETH1
	63
	64	#define CONFIG_SYS_FEC0_PINMUX 0
	65	#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
	66	#define CONFIG_SYS_FEC1_PINMUX 0
	67	#define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_MIIBASE
	68	#define MCFFEC_TOUT_LOOP 50000
	69	#define CONFIG_SYS_FEC0_PHYADDR 0
	70	#define CONFIG_SYS_FEC1_PHYADDR 1
	71
186fc4db AW	72	#define CONFIG_ETHPRIME "FEC0"
	73	#define CONFIG_IPADDR 192.168.1.2
	74	#define CONFIG_NETMASK 255.255.255.0
	75	#define CONFIG_SERVERIP 192.168.1.1
	76	#define CONFIG_GATEWAYIP 192.168.1.1
	77
186fc4db AW	78	#define CONFIG_SYS_FEC_BUF_USE_SRAM
	79	/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
	80	#ifndef CONFIG_SYS_DISCOVER_PHY
	81	#define FECDUPLEX FULL
	82	#define FECSPEED _100BASET
	83	#define LINKSTATUS 1
	84	#else
	85	#define LINKSTATUS 0
	86	#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	87	#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	88	#endif
	89	#endif /* CONFIG_SYS_DISCOVER_PHY */
	90	#endif
	91
	92	#define CONFIG_HOSTNAME M54418TWR
	93
	94	#if defined(CONFIG_CF_SBF)
	95	/* ST Micro serial flash */
	96	#define CONFIG_SYS_LOAD_ADDR2 0x40010007
	97	#define CONFIG_EXTRA_ENV_SETTINGS \
	98	"netdev=eth0\0" \
	99	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
	100	"loadaddr=0x40010000\0" \
	101	"sbfhdr=sbfhdr.bin\0" \
	102	"uboot=u-boot.bin\0" \
	103	"load=tftp ${loadaddr} ${sbfhdr};" \
	104	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \
	105	"upd=run load; run prog\0" \
	106	"prog=sf probe 0:1 1000000 3;" \
	107	"sf erase 0 40000;" \
	108	"sf write ${loadaddr} 0 40000;" \
	109	"save\0" \
	110	""
	111	#elif defined(CONFIG_SYS_NAND_BOOT)
	112	#define CONFIG_EXTRA_ENV_SETTINGS \
	113	"netdev=eth0\0" \
	114	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
	115	"loadaddr=0x40010000\0" \
	116	"u-boot=u-boot.bin\0" \
	117	"load=tftp ${loadaddr} ${u-boot};\0" \
	118	"upd=run load; run prog\0" \
	119	"prog=nand device 0;" \
	120	"nand erase 0 40000;" \
	121	"nb_update ${loadaddr} ${filesize};" \
	122	"save\0" \
	123	""
	124	#else
	125	#define CONFIG_SYS_UBOOT_END 0x3FFFF
	126	#define CONFIG_EXTRA_ENV_SETTINGS \
	127	"netdev=eth0\0" \
	128	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
	129	"loadaddr=40010000\0" \
	130	"u-boot=u-boot.bin\0" \
	131	"load=tftp ${loadaddr) ${u-boot}\0" \
	132	"upd=run load; run prog\0" \
	133	"prog=prot off mram" " ;" \
	134	"cp.b ${loadaddr} 0 ${filesize};" \
	135	"save\0" \
	136	""
	137	#endif
	138
	139	/* Realtime clock */
	140	#undef CONFIG_MCFRTC
	141	#define CONFIG_RTC_MCFRRTC
142	#define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000
143
144	/* Timer */
145	#define CONFIG_MCFTMR
146	#undef CONFIG_MCFPIT
147
148	/* I2c */
00f792e0	149	#undef CONFIG_SYS_FSL_I2C
ea818dbb	150	#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
186fc4db AW	151	/* I2C speed and slave address */
	152	#define CONFIG_SYS_I2C_SPEED 80000
	153	#define CONFIG_SYS_I2C_SLAVE 0x7F
	154	#define CONFIG_SYS_I2C_OFFSET 0x58000
	155	#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
	156
	157	/* DSPI and Serial Flash */
	158	#define CONFIG_CF_SPI
	159	#define CONFIG_CF_DSPI
	160	#define CONFIG_SERIAL_FLASH
	161	#define CONFIG_HARD_SPI
	162	#define CONFIG_SYS_SBFHDR_SIZE 0x7
	163	#ifdef CONFIG_CMD_SPI
186fc4db AW	164
	165	# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) \| \
	166	DSPI_CTAR_PCSSCK_1CLK \| \
	167	DSPI_CTAR_PASC(0) \| \
	168	DSPI_CTAR_PDT(0) \| \
	169	DSPI_CTAR_CSSCK(0) \| \
	170	DSPI_CTAR_ASC(0) \| \
	171	DSPI_CTAR_DT(1))
	172	# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0)
	173	# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0)
	174	#endif
	175
	176	/* Input, PCI, Flexbus, and VCO */
	177	#define CONFIG_EXTRA_CLOCK
	178
	179	#define CONFIG_PRAM 2048 /* 2048 KB */
	180
186fc4db AW	181	#define CONFIG_SYS_LONGHELP /* undef to save memory */
186fc4db AW	182
186fc4db AW	183	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
186fc4db AW	184
186fc4db AW	185	#define CONFIG_SYS_MBAR 0xFC000000
	186
	187	/*
	188	* Low Level Configuration Settings
	189	* (address mappings, register initial values, etc.)
	190	* You should know what you are doing if you make changes here.
	191	*/
	192
	193	/*-----------------------------------------------------------------------
	194	* Definitions for initial stack pointer and data area (in DPRAM)
	195	*/
	196	#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
	197	/* End of used area in internal SRAM */
	198	#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
	199	#define CONFIG_SYS_INIT_RAM_CTRL 0x221
186fc4db	200	#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - \
627b73e2	201	GENERATED_GBL_DATA_SIZE) - 32)
186fc4db AW	202	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	203	#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32)
	204
	205	/*-----------------------------------------------------------------------
	206	* Start addresses for the final memory configuration
	207	* (Set up by the startup code)
	208	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
	209	*/
	210	#define CONFIG_SYS_SDRAM_BASE 0x40000000
	211	#define CONFIG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */
	212
	213	#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400)
	214	#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
	215	#define CONFIG_SYS_DRAM_TEST
	216
	217	#if defined(CONFIG_CF_SBF) \|\| defined(CONFIG_SYS_NAND_BOOT)
	218	#define CONFIG_SERIAL_BOOT
	219	#endif
	220
	221	#if defined(CONFIG_SERIAL_BOOT)
61a4392a	222	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
186fc4db AW	223	#else
	224	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
	225	#endif
	226
	227	#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024)
	228	/* Reserve 256 kB for Monitor */
	229	#define CONFIG_SYS_MONITOR_LEN (256 << 10)
	230	/* Reserve 256 kB for malloc() */
	231	#define CONFIG_SYS_MALLOC_LEN (256 << 10)
	232
	233	/*
	234	* For booting Linux, the board info and command line data
	235	* have to be in the first 8 MB of memory, since this is
	236	* the maximum mapped by the Linux kernel during initialization ??
	237	*/
	238	/* Initial Memory map for Linux */
	239	#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \
	240	(CONFIG_SYS_SDRAM_SIZE << 20))
	241
	242	/* Configuration for environment
	243	* Environment is embedded in u-boot in the second sector of the flash
	244	*/
	245	#if !defined(CONFIG_SERIAL_BOOT) /MRAM boot/
186fc4db AW	246	#define CONFIG_ENV_ADDR (0x40000 - 0x1000) /MRAM size 40000/
	247	#define CONFIG_ENV_SIZE 0x1000
	248	#endif
	249
	250	#if defined(CONFIG_CF_SBF)
186fc4db AW	251	#define CONFIG_ENV_SPI_CS 1
	252	#define CONFIG_ENV_OFFSET 0x40000
	253	#define CONFIG_ENV_SIZE 0x2000
	254	#define CONFIG_ENV_SECT_SIZE 0x10000
	255	#endif
	256	#if defined(CONFIG_SYS_NAND_BOOT)
186fc4db AW	257	#define CONFIG_ENV_OFFSET 0x80000
	258	#define CONFIG_ENV_SIZE 0x20000
	259	#define CONFIG_ENV_SECT_SIZE 0x20000
	260	#endif
	261	#undef CONFIG_ENV_OVERWRITE
	262
	263	/* FLASH organization */
	264	#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
	265
	266	#undef CONFIG_SYS_FLASH_CFI
	267	#ifdef CONFIG_SYS_FLASH_CFI
	268
	269	#define CONFIG_FLASH_CFI_DRIVER 1
	270	/* Max size that the board might have */
	271	#define CONFIG_SYS_FLASH_SIZE 0x1000000
	272	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	273	/* max number of memory banks */
	274	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	275	/* max number of sectors on one chip */
	276	#define CONFIG_SYS_MAX_FLASH_SECT 270
	277	/* "Real" (hardware) sectors protection */
	278	#define CONFIG_SYS_FLASH_PROTECTION
	279	#define CONFIG_SYS_FLASH_CHECKSUM
	280	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE }
	281	#else
	282	/* max number of sectors on one chip */
	283	#define CONFIG_SYS_MAX_FLASH_SECT 270
	284	/* max number of sectors on one chip */
	285	#define CONFIG_SYS_MAX_FLASH_BANKS 0
	286	#endif
	287
	288	/*
	289	* This is setting for JFFS2 support in u-boot.
	290	* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
	291	*/
	292	#ifdef CONFIG_CMD_JFFS2
	293	#define CONFIG_JFFS2_DEV "nand0"
	294	#define CONFIG_JFFS2_PART_OFFSET (0x800000)
186fc4db	295	#define CONFIG_MTD_DEVICE
186fc4db AW	296
	297	#endif
	298
	299	#ifdef CONFIG_CMD_UBI
186fc4db AW	300	#define CONFIG_MTD_DEVICE /* needed for mtdparts command */
186fc4db AW	301	#define CONFIG_MTD_PARTITIONS /* mtdparts and UBI support */
186fc4db AW	302	#endif
	303	/* Cache Configuration */
	304	#define CONFIG_SYS_CACHELINE_SIZE 16
	305	#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
	306	CONFIG_SYS_INIT_RAM_SIZE - 8)
	307	#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
	308	CONFIG_SYS_INIT_RAM_SIZE - 4)
	309	#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA)
	310	#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
	311	#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE \| \
	312	CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) \| \
	313	CF_ACR_EN \| CF_ACR_SM_ALL)
	314	#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC \| CF_CACR_IEC \| \
	315	CF_CACR_ICINVA \| CF_CACR_EUSP)
	316	#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR \| \
	317	CF_CACR_DEC \| CF_CACR_DDCM_P \| \
	318	CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
	319
	320	#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
	321	CONFIG_SYS_INIT_RAM_SIZE - 12)
	322
	323	/*-----------------------------------------------------------------------
	324	* Memory bank definitions
	325	*/
	326	/*
	327	* CS0 - NOR Flash 16MB
	328	* CS1 - Available
	329	* CS2 - Available
	330	* CS3 - Available
	331	* CS4 - Available
	332	* CS5 - Available
	333	*/
	334
	335	/* Flash */
	336	#define CONFIG_SYS_CS0_BASE 0x00000000
	337	#define CONFIG_SYS_CS0_MASK 0x000F0101
	338	#define CONFIG_SYS_CS0_CTRL 0x00001D60
	339
	340	#endif /* _M54418TWR_H */