projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 9490a7f1 | 1 | /* |
| 4bc6eb79 | 2 | * Copyright 2008-2009 Freescale Semiconductor, Inc. |
| 9490a7f1 KG |
3 | * |
| 4 | * See file CREDITS for list of people who contributed to this | |
| 5 | * project. | |
| 6 | * | |
| 7 | * This program is free software; you can redistribute it and/or | |
| 8 | * modify it under the terms of the GNU General Public License as | |
| 9 | * published by the Free Software Foundation; either version 2 of | |
| 10 | * the License, or (at your option) any later version. | |
| 11 | * | |
| 12 | * This program is distributed in the hope that it will be useful, | |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 15 | * GNU General Public License for more details. | |
| 16 | * | |
| 17 | * You should have received a copy of the GNU General Public License | |
| 18 | * along with this program; if not, write to the Free Software | |
| 19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| 20 | * MA 02111-1307 USA | |
| 21 | */ | |
| 22 | ||
| 23 | /* | |
| 24 | * mpc8536ds board configuration file | |
| 25 | * | |
| 26 | */ | |
| 27 | #ifndef __CONFIG_H | |
| 28 | #define __CONFIG_H | |
| 29 | ||
| 30 | /* High Level Configuration Options */ | |
| 31 | #define CONFIG_BOOKE 1 /* BOOKE */ | |
| 32 | #define CONFIG_E500 1 /* BOOKE e500 family */ | |
| 33 | #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ | |
| 34 | #define CONFIG_MPC8536 1 | |
| 35 | #define CONFIG_MPC8536DS 1 | |
| 36 | ||
| c51fc5d5 | 37 | #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ |
| 9490a7f1 KG |
38 | #define CONFIG_PCI 1 /* Enable PCI/PCIE */ |
| 39 | #define CONFIG_PCI1 1 /* Enable PCI controller 1 */ | |
| 40 | #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ | |
| 41 | #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ | |
| 42 | #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ | |
| 43 | #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ | |
| 44 | #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ | |
| 0151cbac | 45 | #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ |
| 9490a7f1 KG |
46 | |
| 47 | #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ | |
| 48 | ||
| 49 | #define CONFIG_TSEC_ENET /* tsec ethernet support */ | |
| 50 | #define CONFIG_ENV_OVERWRITE | |
| 51 | ||
| 52 | /* | |
| 53 | * When initializing flash, if we cannot find the manufacturer ID, | |
| 54 | * assume this is the AMD flash associated with the CDS board. | |
| 55 | * This allows booting from a promjet. | |
| 56 | */ | |
| 57 | #define CONFIG_ASSUME_AMD_FLASH | |
| 58 | ||
| 59 | #ifndef __ASSEMBLY__ | |
| 60 | extern unsigned long get_board_sys_clk(unsigned long dummy); | |
| 61 | extern unsigned long get_board_ddr_clk(unsigned long dummy); | |
| 62 | #endif | |
| 63 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ | |
| c0391111 | 64 | #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) |
| 9490a7f1 KG |
65 | #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ |
| 66 | #define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq | |
| 67 | from ICS307 instead of switches */ | |
| 68 | ||
| 69 | /* | |
| 70 | * These can be toggled for performance analysis, otherwise use default. | |
| 71 | */ | |
| 72 | #define CONFIG_L2_CACHE /* toggle L2 cache */ | |
| 73 | #define CONFIG_BTB /* toggle branch predition */ | |
| 9490a7f1 | 74 | |
| 80522dc8 AF |
75 | #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ |
| 76 | ||
| 9490a7f1 KG |
77 | #define CONFIG_ENABLE_36BIT_PHYS 1 |
| 78 | ||
| 6d0f6bcf JCPV |
79 | #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ |
| 80 | #define CONFIG_SYS_MEMTEST_END 0x7fffffff | |
| 9490a7f1 KG |
81 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ |
| 82 | ||
| 83 | /* | |
| 84 | * Base addresses -- Note these are effective addresses where the | |
| 85 | * actual resources get mapped (not physical addresses) | |
| 86 | */ | |
| 6d0f6bcf JCPV |
87 | #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ |
| 88 | #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ | |
| 89 | #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ | |
| 90 | #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ | |
| 9490a7f1 | 91 | |
| 6d0f6bcf JCPV |
92 | #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) |
| 93 | #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) | |
| 94 | #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) | |
| 95 | #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0xb000) | |
| 9490a7f1 KG |
96 | |
| 97 | /* DDR Setup */ | |
| 98 | #define CONFIG_FSL_DDR2 | |
| 99 | #undef CONFIG_FSL_DDR_INTERACTIVE | |
| 100 | #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ | |
| 101 | #define CONFIG_DDR_SPD | |
| 102 | #undef CONFIG_DDR_DLL | |
| 103 | ||
| 9b0ad1b1 | 104 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ |
| 9490a7f1 KG |
105 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef |
| 106 | ||
| 6d0f6bcf JCPV |
107 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 |
| 108 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 9490a7f1 KG |
109 | |
| 110 | #define CONFIG_NUM_DDR_CONTROLLERS 1 | |
| 111 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 112 | #define CONFIG_CHIP_SELECTS_PER_CTRL 2 | |
| 113 | ||
| 114 | /* I2C addresses of SPD EEPROMs */ | |
| 115 | #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ | |
| 6d0f6bcf | 116 | #define CONFIG_SYS_SPD_BUS_NUM 1 |
| 9490a7f1 KG |
117 | |
| 118 | /* These are used when DDR doesn't use SPD. */ | |
| 6d0f6bcf JCPV |
119 | #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ |
| 120 | #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F | |
| 121 | #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ | |
| 122 | #define CONFIG_SYS_DDR_TIMING_3 0x00000000 | |
| 123 | #define CONFIG_SYS_DDR_TIMING_0 0x00260802 | |
| 124 | #define CONFIG_SYS_DDR_TIMING_1 0x3935d322 | |
| 125 | #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 | |
| 126 | #define CONFIG_SYS_DDR_MODE_1 0x00480432 | |
| 127 | #define CONFIG_SYS_DDR_MODE_2 0x00000000 | |
| 128 | #define CONFIG_SYS_DDR_INTERVAL 0x06180100 | |
| 129 | #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef | |
| 130 | #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 | |
| 131 | #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 | |
| 132 | #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 | |
| 133 | #define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */ | |
| 134 | #define CONFIG_SYS_DDR_CONTROL2 0x04400010 | |
| 135 | ||
| 136 | #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d | |
| 137 | #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 | |
| 138 | #define CONFIG_SYS_DDR_SBE 0x00010000 | |
| 9490a7f1 | 139 | |
| 9490a7f1 KG |
140 | /* Make sure required options are set */ |
| 141 | #ifndef CONFIG_SPD_EEPROM | |
| 142 | #error ("CONFIG_SPD_EEPROM is required") | |
| 143 | #endif | |
| 144 | ||
| 145 | #undef CONFIG_CLOCKS_IN_MHZ | |
| 146 | ||
| 147 | ||
| 148 | /* | |
| 149 | * Memory map -- xxx -this is wrong, needs updating | |
| 150 | * | |
| 151 | * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable | |
| 152 | * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable | |
| 153 | * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable | |
| 154 | * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable | |
| 155 | * | |
| 156 | * Localbus cacheable (TBD) | |
| 157 | * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable | |
| 158 | * | |
| 159 | * Localbus non-cacheable | |
| c57fc289 | 160 | * 0xe000_0000 0xe7ff_ffff Promjet/free 128M non-cacheable |
| 9490a7f1 | 161 | * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable |
| c57fc289 | 162 | * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable |
| 9490a7f1 KG |
163 | * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 |
| 164 | * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 | |
| 165 | * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable | |
| 166 | */ | |
| 167 | ||
| 168 | /* | |
| 169 | * Local Bus Definitions | |
| 170 | */ | |
| 6d0f6bcf | 171 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ |
| c953ddfd | 172 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE |
| 9490a7f1 | 173 | |
| c953ddfd KG |
174 | #define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V) |
| 175 | #define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 | |
| 9490a7f1 | 176 | |
| c953ddfd KG |
177 | #define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) |
| 178 | #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 | |
| 9490a7f1 | 179 | |
| 6d0f6bcf JCPV |
180 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE + 0x8000000, CONFIG_SYS_FLASH_BASE} |
| 181 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 9490a7f1 KG |
182 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ |
| 183 | ||
| 6d0f6bcf JCPV |
184 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ |
| 185 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 186 | #undef CONFIG_SYS_FLASH_CHECKSUM | |
| 187 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 188 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 9490a7f1 | 189 | |
| 6d0f6bcf | 190 | #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ |
| 9490a7f1 KG |
191 | |
| 192 | #define CONFIG_FLASH_CFI_DRIVER | |
| 6d0f6bcf JCPV |
193 | #define CONFIG_SYS_FLASH_CFI |
| 194 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 195 | #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 | |
| 9490a7f1 KG |
196 | |
| 197 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ | |
| 198 | ||
| 199 | #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ | |
| 200 | #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ | |
| 52b565f5 | 201 | #define PIXIS_BASE_PHYS PIXIS_BASE |
| 9490a7f1 | 202 | |
| 52b565f5 | 203 | #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) |
| 6d0f6bcf | 204 | #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ |
| 9490a7f1 KG |
205 | |
| 206 | #define PIXIS_ID 0x0 /* Board ID at offset 0 */ | |
| 207 | #define PIXIS_VER 0x1 /* Board version at offset 1 */ | |
| 208 | #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ | |
| 209 | #define PIXIS_CSR 0x3 /* PIXIS General control/status register */ | |
| 210 | #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ | |
| 211 | #define PIXIS_PWR 0x5 /* PIXIS Power status register */ | |
| 212 | #define PIXIS_AUX 0x6 /* Auxiliary 1 register */ | |
| 213 | #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ | |
| 214 | #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ | |
| 215 | #define PIXIS_VCTL 0x10 /* VELA Control Register */ | |
| 216 | #define PIXIS_VSTAT 0x11 /* VELA Status Register */ | |
| 217 | #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ | |
| 218 | #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ | |
| 219 | #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ | |
| 220 | #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ | |
| 221 | #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ | |
| 222 | #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ | |
| 223 | #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ | |
| 224 | #define PIXIS_VSYSCLK0 0x1A /* VELA SYSCLK0 Register */ | |
| 225 | #define PIXIS_VSYSCLK1 0x1B /* VELA SYSCLK1 Register */ | |
| 226 | #define PIXIS_VSYSCLK2 0x1C /* VELA SYSCLK2 Register */ | |
| 227 | #define PIXIS_VDDRCLK0 0x1D /* VELA DDRCLK0 Register */ | |
| 228 | #define PIXIS_VDDRCLK1 0x1E /* VELA DDRCLK1 Register */ | |
| 229 | #define PIXIS_VDDRCLK2 0x1F /* VELA DDRCLK2 Register */ | |
| 230 | #define PIXIS_VWATCH 0x24 /* Watchdog Register */ | |
| 231 | #define PIXIS_LED 0x25 /* LED Register */ | |
| 232 | ||
| 233 | /* old pixis referenced names */ | |
| 234 | #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ | |
| 235 | #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ | |
| 6d0f6bcf | 236 | #define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0 |
| 9490a7f1 | 237 | |
| 6d0f6bcf JCPV |
238 | #define CONFIG_SYS_INIT_RAM_LOCK 1 |
| 239 | #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ | |
| 240 | #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ | |
| 9490a7f1 | 241 | |
| 6d0f6bcf JCPV |
242 | #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ |
| 243 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) | |
| 244 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 9490a7f1 | 245 | |
| 6d0f6bcf JCPV |
246 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ |
| 247 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ | |
| 9490a7f1 | 248 | |
| c57fc289 JJ |
249 | #define CONFIG_SYS_NAND_BASE 0xffa00000 |
| 250 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
| 251 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ | |
| 252 | CONFIG_SYS_NAND_BASE + 0x40000, \ | |
| 253 | CONFIG_SYS_NAND_BASE + 0x80000, \ | |
| 254 | CONFIG_SYS_NAND_BASE + 0xC0000} | |
| 255 | #define CONFIG_SYS_MAX_NAND_DEVICE 4 | |
| c57fc289 JJ |
256 | #define CONFIG_MTD_NAND_VERIFY_WRITE |
| 257 | #define CONFIG_CMD_NAND 1 | |
| 258 | #define CONFIG_NAND_FSL_ELBC 1 | |
| 259 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 260 | ||
| 261 | /* NAND flash config */ | |
| 72a9414a | 262 | #define CONFIG_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ |
| c57fc289 JJ |
263 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
| 264 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
| 265 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 266 | | BR_V) /* valid */ | |
| 267 | #define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ | |
| 268 | | OR_FCM_PGS /* Large Page*/ \ | |
| 269 | | OR_FCM_CSCT \ | |
| 270 | | OR_FCM_CST \ | |
| 271 | | OR_FCM_CHT \ | |
| 272 | | OR_FCM_SCY_1 \ | |
| 273 | | OR_FCM_TRLX \ | |
| 274 | | OR_FCM_EHTR) | |
| 275 | ||
| 276 | #define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ | |
| 277 | #define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ | |
| 278 | ||
| 72a9414a | 279 | #define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\ |
| c57fc289 JJ |
280 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
| 281 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
| 282 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 283 | | BR_V) /* valid */ | |
| 284 | #define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ | |
| 72a9414a | 285 | #define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\ |
| c57fc289 JJ |
286 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
| 287 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
| 288 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 289 | | BR_V) /* valid */ | |
| 290 | #define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ | |
| 291 | ||
| 72a9414a | 292 | #define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\ |
| c57fc289 JJ |
293 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
| 294 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
| 295 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 296 | | BR_V) /* valid */ | |
| 297 | #define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ | |
| 298 | ||
| 9490a7f1 KG |
299 | /* Serial Port - controlled on board with jumper J8 |
| 300 | * open - index 2 | |
| 301 | * shorted - index 1 | |
| 302 | */ | |
| 303 | #define CONFIG_CONS_INDEX 1 | |
| 304 | #undef CONFIG_SERIAL_SOFTWARE_FIFO | |
| 6d0f6bcf JCPV |
305 | #define CONFIG_SYS_NS16550 |
| 306 | #define CONFIG_SYS_NS16550_SERIAL | |
| 307 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 308 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
| 9490a7f1 | 309 | |
| 6d0f6bcf | 310 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
| 9490a7f1 KG |
311 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} |
| 312 | ||
| 6d0f6bcf JCPV |
313 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) |
| 314 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) | |
| 9490a7f1 KG |
315 | |
| 316 | /* Use the HUSH parser */ | |
| 6d0f6bcf JCPV |
317 | #define CONFIG_SYS_HUSH_PARSER |
| 318 | #ifdef CONFIG_SYS_HUSH_PARSER | |
| 319 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 9490a7f1 KG |
320 | #endif |
| 321 | ||
| 322 | /* | |
| 323 | * Pass open firmware flat tree | |
| 324 | */ | |
| 325 | #define CONFIG_OF_LIBFDT 1 | |
| 326 | #define CONFIG_OF_BOARD_SETUP 1 | |
| 327 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
| 328 | ||
| 6d0f6bcf JCPV |
329 | #define CONFIG_SYS_64BIT_STRTOUL 1 |
| 330 | #define CONFIG_SYS_64BIT_VSPRINTF 1 | |
| 9490a7f1 KG |
331 | |
| 332 | ||
| 333 | /* | |
| 334 | * I2C | |
| 335 | */ | |
| 336 | #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ | |
| 337 | #define CONFIG_HARD_I2C /* I2C with hardware support */ | |
| 338 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ | |
| 339 | #define CONFIG_I2C_MULTI_BUS | |
| 6d0f6bcf JCPV |
340 | #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ |
| 341 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
| 342 | #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} /* Don't probe these addrs */ | |
| 343 | #define CONFIG_SYS_I2C_OFFSET 0x3000 | |
| 344 | #define CONFIG_SYS_I2C2_OFFSET 0x3100 | |
| 9490a7f1 KG |
345 | |
| 346 | /* | |
| 347 | * I2C2 EEPROM | |
| 348 | */ | |
| 32628c50 JCPV |
349 | #define CONFIG_ID_EEPROM |
| 350 | #ifdef CONFIG_ID_EEPROM | |
| 6d0f6bcf | 351 | #define CONFIG_SYS_I2C_EEPROM_NXID |
| 9490a7f1 | 352 | #endif |
| 6d0f6bcf JCPV |
353 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 |
| 354 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 355 | #define CONFIG_SYS_EEPROM_BUS_NUM 1 | |
| 9490a7f1 KG |
356 | |
| 357 | /* | |
| 358 | * General PCI | |
| 359 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 360 | */ | |
| 361 | ||
| 5af0fdd8 KG |
362 | #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 |
| 363 | #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 | |
| 364 | #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 | |
| 6d0f6bcf | 365 | #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ |
| aca5f018 | 366 | #define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000 |
| 5f91ef6a | 367 | #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 |
| 6d0f6bcf JCPV |
368 | #define CONFIG_SYS_PCI1_IO_PHYS 0xffc00000 |
| 369 | #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */ | |
| 9490a7f1 KG |
370 | |
| 371 | /* controller 1, Slot 1, tgtid 1, Base address a000 */ | |
| 5af0fdd8 | 372 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 |
| 10795f42 | 373 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 |
| 5af0fdd8 | 374 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 |
| 6d0f6bcf | 375 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x08000000 /* 128M */ |
| aca5f018 | 376 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc10000 |
| 5f91ef6a | 377 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 |
| 6d0f6bcf JCPV |
378 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc10000 |
| 379 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 9490a7f1 KG |
380 | |
| 381 | /* controller 2, Slot 2, tgtid 2, Base address 9000 */ | |
| 5af0fdd8 | 382 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0x98000000 |
| 10795f42 | 383 | #define CONFIG_SYS_PCIE2_MEM_BUS 0x98000000 |
| 5af0fdd8 | 384 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0x98000000 |
| 6d0f6bcf | 385 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x08000000 /* 128M */ |
| aca5f018 | 386 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc20000 |
| 5f91ef6a | 387 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 |
| 6d0f6bcf JCPV |
388 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000 |
| 389 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 9490a7f1 KG |
390 | |
| 391 | /* controller 3, direct to uli, tgtid 3, Base address 8000 */ | |
| 5af0fdd8 | 392 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 |
| 10795f42 | 393 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 |
| 5af0fdd8 | 394 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 |
| 6d0f6bcf | 395 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ |
| aca5f018 | 396 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc30000 |
| 5f91ef6a | 397 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 |
| 6d0f6bcf JCPV |
398 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc30000 |
| 399 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
| 9490a7f1 KG |
400 | |
| 401 | #if defined(CONFIG_PCI) | |
| 402 | ||
| 403 | #define CONFIG_NET_MULTI | |
| 404 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
| 405 | ||
| 406 | /*PCIE video card used*/ | |
| aca5f018 | 407 | #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE3_IO_VIRT |
| 9490a7f1 KG |
408 | |
| 409 | /*PCI video card used*/ | |
| aca5f018 | 410 | /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/ |
| 9490a7f1 KG |
411 | |
| 412 | /* video */ | |
| 413 | #define CONFIG_VIDEO | |
| 414 | ||
| 415 | #if defined(CONFIG_VIDEO) | |
| 416 | #define CONFIG_BIOSEMU | |
| 417 | #define CONFIG_CFB_CONSOLE | |
| 418 | #define CONFIG_VIDEO_SW_CURSOR | |
| 419 | #define CONFIG_VGA_AS_SINGLE_DEVICE | |
| 420 | #define CONFIG_ATI_RADEON_FB | |
| 421 | #define CONFIG_VIDEO_LOGO | |
| 422 | /*#define CONFIG_CONSOLE_CURSOR*/ | |
| aca5f018 | 423 | #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT |
| 9490a7f1 KG |
424 | #endif |
| 425 | ||
| 426 | #undef CONFIG_EEPRO100 | |
| 427 | #undef CONFIG_TULIP | |
| 428 | #undef CONFIG_RTL8139 | |
| 429 | ||
| 9490a7f1 | 430 | #ifndef CONFIG_PCI_PNP |
| 5f91ef6a KG |
431 | #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS |
| 432 | #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS | |
| 9490a7f1 KG |
433 | #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ |
| 434 | #endif | |
| 435 | ||
| 436 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 437 | ||
| 438 | #endif /* CONFIG_PCI */ | |
| 439 | ||
| 440 | /* SATA */ | |
| 441 | #define CONFIG_LIBATA | |
| 442 | #define CONFIG_FSL_SATA | |
| 443 | ||
| 6d0f6bcf | 444 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 |
| 9490a7f1 | 445 | #define CONFIG_SATA1 |
| 6d0f6bcf JCPV |
446 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR |
| 447 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 9490a7f1 | 448 | #define CONFIG_SATA2 |
| 6d0f6bcf JCPV |
449 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR |
| 450 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
| 9490a7f1 KG |
451 | |
| 452 | #ifdef CONFIG_FSL_SATA | |
| 453 | #define CONFIG_LBA48 | |
| 454 | #define CONFIG_CMD_SATA | |
| 455 | #define CONFIG_DOS_PARTITION | |
| 456 | #define CONFIG_CMD_EXT2 | |
| 457 | #endif | |
| 458 | ||
| 4bc6eb79 VM |
459 | /* |
| 460 | * USB | |
| 461 | */ | |
| 462 | #define CONFIG_CMD_USB | |
| 463 | #define CONFIG_USB_STORAGE | |
| 464 | #define CONFIG_USB_EHCI | |
| 465 | #define CONFIG_USB_EHCI_FSL | |
| 466 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 467 | ||
| 9490a7f1 KG |
468 | #if defined(CONFIG_TSEC_ENET) |
| 469 | ||
| 470 | #ifndef CONFIG_NET_MULTI | |
| 471 | #define CONFIG_NET_MULTI 1 | |
| 472 | #endif | |
| 473 | ||
| 474 | #define CONFIG_MII 1 /* MII PHY management */ | |
| 475 | #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ | |
| 476 | #define CONFIG_TSEC1 1 | |
| 477 | #define CONFIG_TSEC1_NAME "eTSEC1" | |
| 478 | #define CONFIG_TSEC3 1 | |
| 479 | #define CONFIG_TSEC3_NAME "eTSEC3" | |
| 480 | ||
| 2e26d837 JJ |
481 | #define CONFIG_FSL_SGMII_RISER 1 |
| 482 | #define SGMII_RISER_PHY_OFFSET 0x1c | |
| 483 | ||
| 9490a7f1 KG |
484 | #define TSEC1_PHY_ADDR 1 /* TSEC1 -> PHY1 */ |
| 485 | #define TSEC3_PHY_ADDR 0 /* TSEC3 -> PHY0 */ | |
| 486 | ||
| 487 | #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 488 | #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 489 | ||
| 490 | #define TSEC1_PHYIDX 0 | |
| 491 | #define TSEC3_PHYIDX 0 | |
| 492 | ||
| 493 | #define CONFIG_ETHPRIME "eTSEC1" | |
| 494 | ||
| 495 | #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ | |
| 496 | ||
| 497 | #endif /* CONFIG_TSEC_ENET */ | |
| 498 | ||
| 499 | /* | |
| 500 | * Environment | |
| 501 | */ | |
| 5a1aceb0 | 502 | #define CONFIG_ENV_IS_IN_FLASH 1 |
| 6d0f6bcf | 503 | #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 |
| 0e8d1586 | 504 | #define CONFIG_ENV_ADDR 0xfff80000 |
| 9490a7f1 | 505 | #else |
| c57fc289 | 506 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) |
| 9490a7f1 | 507 | #endif |
| 0e8d1586 JCPV |
508 | #define CONFIG_ENV_SIZE 0x2000 |
| 509 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 9490a7f1 KG |
510 | |
| 511 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
| 6d0f6bcf | 512 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
| 9490a7f1 KG |
513 | |
| 514 | /* | |
| 515 | * Command line configuration. | |
| 516 | */ | |
| 517 | #include <config_cmd_default.h> | |
| 518 | ||
| 519 | #define CONFIG_CMD_IRQ | |
| 520 | #define CONFIG_CMD_PING | |
| 521 | #define CONFIG_CMD_I2C | |
| 522 | #define CONFIG_CMD_MII | |
| 523 | #define CONFIG_CMD_ELF | |
| 1c9aa76b KG |
524 | #define CONFIG_CMD_IRQ |
| 525 | #define CONFIG_CMD_SETEXPR | |
| 9490a7f1 KG |
526 | |
| 527 | #if defined(CONFIG_PCI) | |
| 528 | #define CONFIG_CMD_PCI | |
| 529 | #define CONFIG_CMD_BEDBUG | |
| 530 | #define CONFIG_CMD_NET | |
| 531 | #endif | |
| 532 | ||
| 533 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
| 534 | ||
| 80522dc8 AF |
535 | #define CONFIG_MMC 1 |
| 536 | ||
| 537 | #ifdef CONFIG_MMC | |
| 538 | #define CONFIG_FSL_ESDHC | |
| 539 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 540 | #define CONFIG_CMD_MMC | |
| 541 | #define CONFIG_GENERIC_MMC | |
| 542 | #define CONFIG_CMD_EXT2 | |
| 543 | #define CONFIG_CMD_FAT | |
| 544 | #define CONFIG_DOS_PARTITION | |
| 545 | #endif | |
| 546 | ||
| 9490a7f1 KG |
547 | /* |
| 548 | * Miscellaneous configurable options | |
| 549 | */ | |
| 6d0f6bcf | 550 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| 9490a7f1 | 551 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
| 6d0f6bcf JCPV |
552 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
| 553 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
| 9490a7f1 | 554 | #if defined(CONFIG_CMD_KGDB) |
| 6d0f6bcf | 555 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| 9490a7f1 | 556 | #else |
| 6d0f6bcf | 557 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| 9490a7f1 | 558 | #endif |
| 6d0f6bcf JCPV |
559 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| 560 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 561 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
| 562 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ | |
| 9490a7f1 KG |
563 | |
| 564 | /* | |
| 565 | * For booting Linux, the board info and command line data | |
| 566 | * have to be in the first 8 MB of memory, since this is | |
| 567 | * the maximum mapped by the Linux kernel during initialization. | |
| 568 | */ | |
| 6d0f6bcf | 569 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ |
| 9490a7f1 KG |
570 | |
| 571 | /* | |
| 572 | * Internal Definitions | |
| 573 | * | |
| 574 | * Boot Flags | |
| 575 | */ | |
| 576 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
| 577 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
| 578 | ||
| 579 | #if defined(CONFIG_CMD_KGDB) | |
| 580 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 581 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
| 582 | #endif | |
| 583 | ||
| 584 | /* | |
| 585 | * Environment Configuration | |
| 586 | */ | |
| 587 | ||
| 588 | /* The mac addresses for all ethernet interface */ | |
| 589 | #if defined(CONFIG_TSEC_ENET) | |
| 590 | #define CONFIG_HAS_ETH0 | |
| 591 | #define CONFIG_ETHADDR 00:E0:0C:02:00:FD | |
| 592 | #define CONFIG_HAS_ETH1 | |
| 593 | #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD | |
| 594 | #define CONFIG_HAS_ETH2 | |
| 595 | #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD | |
| 596 | #define CONFIG_HAS_ETH3 | |
| 597 | #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD | |
| 598 | #endif | |
| 599 | ||
| 600 | #define CONFIG_IPADDR 192.168.1.254 | |
| 601 | ||
| 602 | #define CONFIG_HOSTNAME unknown | |
| 603 | #define CONFIG_ROOTPATH /opt/nfsroot | |
| 604 | #define CONFIG_BOOTFILE uImage | |
| 605 | #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ | |
| 606 | ||
| 607 | #define CONFIG_SERVERIP 192.168.1.1 | |
| 608 | #define CONFIG_GATEWAYIP 192.168.1.1 | |
| 609 | #define CONFIG_NETMASK 255.255.255.0 | |
| 610 | ||
| 611 | /* default location for tftp and bootm */ | |
| 612 | #define CONFIG_LOADADDR 1000000 | |
| 613 | ||
| 614 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
| 615 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ | |
| 616 | ||
| 617 | #define CONFIG_BAUDRATE 115200 | |
| 618 | ||
| 619 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 620 | "netdev=eth0\0" \ | |
| 621 | "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ | |
| 622 | "tftpflash=tftpboot $loadaddr $uboot; " \ | |
| 623 | "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ | |
| 624 | "erase " MK_STR(TEXT_BASE) " +$filesize; " \ | |
| 625 | "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ | |
| 626 | "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ | |
| 627 | "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ | |
| 628 | "consoledev=ttyS0\0" \ | |
| 629 | "ramdiskaddr=2000000\0" \ | |
| 630 | "ramdiskfile=8536ds/ramdisk.uboot\0" \ | |
| 631 | "fdtaddr=c00000\0" \ | |
| 632 | "fdtfile=8536ds/mpc8536ds.dtb\0" \ | |
| 4bc6eb79 VM |
633 | "bdev=sda3\0" \ |
| 634 | "usb_phy_type=ulpi\0" | |
| 9490a7f1 KG |
635 | |
| 636 | #define CONFIG_HDBOOT \ | |
| 637 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 638 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 639 | "tftp $loadaddr $bootfile;" \ | |
| 640 | "tftp $fdtaddr $fdtfile;" \ | |
| 641 | "bootm $loadaddr - $fdtaddr" | |
| 642 | ||
| 643 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 644 | "setenv bootargs root=/dev/nfs rw " \ | |
| 645 | "nfsroot=$serverip:$rootpath " \ | |
| 646 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 647 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 648 | "tftp $loadaddr $bootfile;" \ | |
| 649 | "tftp $fdtaddr $fdtfile;" \ | |
| 650 | "bootm $loadaddr - $fdtaddr" | |
| 651 | ||
| 652 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 653 | "setenv bootargs root=/dev/ram rw " \ | |
| 654 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 655 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 656 | "tftp $loadaddr $bootfile;" \ | |
| 657 | "tftp $fdtaddr $fdtfile;" \ | |
| 658 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 659 | ||
| 660 | #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT | |
| 661 | ||
| 662 | #endif /* __CONFIG_H */ |