]>
Commit | Line | Data |
---|---|---|
67431059 | 1 | /* |
5f7bbd13 | 2 | * Copyright 2004-2007, 2010-2011 Freescale Semiconductor. |
67431059 | 3 | * |
1a459660 | 4 | * SPDX-License-Identifier: GPL-2.0+ |
67431059 AF |
5 | */ |
6 | ||
7 | /* | |
8 | * mpc8568mds board configuration file | |
9 | */ | |
10 | #ifndef __CONFIG_H | |
11 | #define __CONFIG_H | |
12 | ||
13 | /* High Level Configuration Options */ | |
14 | #define CONFIG_BOOKE 1 /* BOOKE */ | |
da9d4610 | 15 | #define CONFIG_E500 1 /* BOOKE e500 family */ |
67431059 AF |
16 | #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ |
17 | #define CONFIG_MPC8568 1 /* MPC8568 specific */ | |
18 | #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ | |
19 | ||
2ae18241 WD |
20 | #define CONFIG_SYS_TEXT_BASE 0xfff80000 |
21 | ||
5f7bbd13 KG |
22 | #define CONFIG_SYS_SRIO |
23 | #define CONFIG_SRIO1 /* SRIO port 1 */ | |
24 | ||
1563f56e HW |
25 | #define CONFIG_PCI 1 /* Enable PCI/PCIE */ |
26 | #define CONFIG_PCI1 1 /* PCI controller */ | |
27 | #define CONFIG_PCIE1 1 /* PCIE controller */ | |
28 | #define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ | |
842033e6 | 29 | #define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ |
8ff3de61 | 30 | #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ |
0151cbac | 31 | #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ |
53677ef1 | 32 | #define CONFIG_TSEC_ENET /* tsec ethernet support */ |
b96c83d4 | 33 | #define CONFIG_QE /* Enable QE */ |
67431059 | 34 | #define CONFIG_ENV_OVERWRITE |
4d3521cc | 35 | #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ |
67431059 | 36 | |
67431059 AF |
37 | #ifndef __ASSEMBLY__ |
38 | extern unsigned long get_clock_freq(void); | |
39 | #endif /*Replace a call to get_clock_freq (after it is implemented)*/ | |
40 | #define CONFIG_SYS_CLK_FREQ 66000000 /*TODO: restore if wanting to read from BCSR: get_clock_freq()*/ /* sysclk for MPC85xx */ | |
41 | ||
42 | /* | |
43 | * These can be toggled for performance analysis, otherwise use default. | |
44 | */ | |
53677ef1 | 45 | #define CONFIG_L2_CACHE /* toggle L2 cache */ |
7a1ac419 | 46 | #define CONFIG_BTB /* toggle branch predition */ |
67431059 AF |
47 | |
48 | /* | |
49 | * Only possible on E500 Version 2 or newer cores. | |
50 | */ | |
51 | #define CONFIG_ENABLE_36BIT_PHYS 1 | |
52 | ||
53 | ||
54 | #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ | |
55 | ||
6d0f6bcf JCPV |
56 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ |
57 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
67431059 | 58 | |
e46fedfe TT |
59 | #define CONFIG_SYS_CCSRBAR 0xe0000000 |
60 | #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR | |
67431059 | 61 | |
e6f5b35b JL |
62 | /* DDR Setup */ |
63 | #define CONFIG_FSL_DDR2 | |
64 | #undef CONFIG_FSL_DDR_INTERACTIVE | |
65 | #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ | |
66 | #define CONFIG_DDR_SPD | |
9b0ad1b1 | 67 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ |
e6f5b35b JL |
68 | |
69 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
70 | ||
6d0f6bcf JCPV |
71 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ |
72 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
67431059 | 73 | |
e6f5b35b JL |
74 | #define CONFIG_NUM_DDR_CONTROLLERS 1 |
75 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
76 | #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
67431059 | 77 | |
e6f5b35b JL |
78 | /* I2C addresses of SPD EEPROMs */ |
79 | #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ | |
80 | ||
81 | /* Make sure required options are set */ | |
67431059 AF |
82 | #ifndef CONFIG_SPD_EEPROM |
83 | #error ("CONFIG_SPD_EEPROM is required") | |
84 | #endif | |
85 | ||
86 | #undef CONFIG_CLOCKS_IN_MHZ | |
87 | ||
67431059 AF |
88 | /* |
89 | * Local Bus Definitions | |
90 | */ | |
91 | ||
92 | /* | |
93 | * FLASH on the Local Bus | |
94 | * Two banks, 8M each, using the CFI driver. | |
95 | * Boot from BR0/OR0 bank at 0xff00_0000 | |
96 | * Alternate BR1/OR1 bank at 0xff80_0000 | |
97 | * | |
98 | * BR0, BR1: | |
99 | * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0 | |
100 | * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0 | |
101 | * Port Size = 16 bits = BRx[19:20] = 10 | |
102 | * Use GPCM = BRx[24:26] = 000 | |
103 | * Valid = BRx[31] = 1 | |
104 | * | |
105 | * 0 4 8 12 16 20 24 28 | |
106 | * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0 | |
107 | * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1 | |
108 | * | |
109 | * OR0, OR1: | |
110 | * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0 | |
111 | * Reserved ORx[17:18] = 11, confusion here? | |
112 | * CSNT = ORx[20] = 1 | |
113 | * ACS = half cycle delay = ORx[21:22] = 11 | |
114 | * SCY = 6 = ORx[24:27] = 0110 | |
115 | * TRLX = use relaxed timing = ORx[29] = 1 | |
116 | * EAD = use external address latch delay = OR[31] = 1 | |
117 | * | |
118 | * 0 4 8 12 16 20 24 28 | |
119 | * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx | |
120 | */ | |
6d0f6bcf | 121 | #define CONFIG_SYS_BCSR_BASE 0xf8000000 |
67431059 | 122 | |
6d0f6bcf | 123 | #define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */ |
67431059 AF |
124 | |
125 | /*Chip select 0 - Flash*/ | |
6d0f6bcf JCPV |
126 | #define CONFIG_SYS_BR0_PRELIM 0xfe001001 |
127 | #define CONFIG_SYS_OR0_PRELIM 0xfe006ff7 | |
67431059 AF |
128 | |
129 | /*Chip slelect 1 - BCSR*/ | |
6d0f6bcf JCPV |
130 | #define CONFIG_SYS_BR1_PRELIM 0xf8000801 |
131 | #define CONFIG_SYS_OR1_PRELIM 0xffffe9f7 | |
67431059 | 132 | |
6d0f6bcf JCPV |
133 | /*#define CONFIG_SYS_FLASH_BANKS_LIST {0xff800000, CONFIG_SYS_FLASH_BASE} */ |
134 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
135 | #define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ | |
136 | #undef CONFIG_SYS_FLASH_CHECKSUM | |
137 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
138 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
67431059 | 139 | |
14d0a02a | 140 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ |
67431059 | 141 | |
00b1883a | 142 | #define CONFIG_FLASH_CFI_DRIVER |
6d0f6bcf JCPV |
143 | #define CONFIG_SYS_FLASH_CFI |
144 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
67431059 AF |
145 | |
146 | ||
147 | /* | |
148 | * SDRAM on the LocalBus | |
149 | */ | |
6d0f6bcf JCPV |
150 | #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ |
151 | #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ | |
67431059 AF |
152 | |
153 | ||
154 | /*Chip select 2 - SDRAM*/ | |
6d0f6bcf JCPV |
155 | #define CONFIG_SYS_BR2_PRELIM 0xf0001861 |
156 | #define CONFIG_SYS_OR2_PRELIM 0xfc006901 | |
67431059 | 157 | |
6d0f6bcf JCPV |
158 | #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ |
159 | #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ | |
160 | #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ | |
161 | #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ | |
67431059 | 162 | |
67431059 AF |
163 | /* |
164 | * Common settings for all Local Bus SDRAM commands. | |
165 | * At run time, either BSMA1516 (for CPU 1.1) | |
166 | * or BSMA1617 (for CPU 1.0) (old) | |
167 | * is OR'ed in too. | |
168 | */ | |
b0fe93ed KG |
169 | #define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \ |
170 | | LSDMR_PRETOACT7 \ | |
171 | | LSDMR_ACTTORW7 \ | |
172 | | LSDMR_BL8 \ | |
173 | | LSDMR_WRC4 \ | |
174 | | LSDMR_CL3 \ | |
175 | | LSDMR_RFEN \ | |
67431059 AF |
176 | ) |
177 | ||
178 | /* | |
179 | * The bcsr registers are connected to CS3 on MDS. | |
180 | * The new memory map places bcsr at 0xf8000000. | |
181 | * | |
182 | * For BR3, need: | |
183 | * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0 | |
184 | * port-size = 8-bits = BR[19:20] = 01 | |
185 | * no parity checking = BR[21:22] = 00 | |
186 | * GPMC for MSEL = BR[24:26] = 000 | |
187 | * Valid = BR[31] = 1 | |
188 | * | |
189 | * 0 4 8 12 16 20 24 28 | |
190 | * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801 | |
191 | * | |
192 | * For OR3, need: | |
193 | * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0 | |
194 | * disable buffer ctrl OR[19] = 0 | |
195 | * CSNT OR[20] = 1 | |
196 | * ACS OR[21:22] = 11 | |
197 | * XACS OR[23] = 1 | |
198 | * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe | |
199 | * SETA OR[28] = 0 | |
200 | * TRLX OR[29] = 1 | |
201 | * EHTR OR[30] = 1 | |
202 | * EAD extra time OR[31] = 1 | |
203 | * | |
204 | * 0 4 8 12 16 20 24 28 | |
205 | * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7 | |
206 | */ | |
6d0f6bcf | 207 | #define CONFIG_SYS_BCSR (0xf8000000) |
67431059 AF |
208 | |
209 | /*Chip slelect 4 - PIB*/ | |
6d0f6bcf JCPV |
210 | #define CONFIG_SYS_BR4_PRELIM 0xf8008801 |
211 | #define CONFIG_SYS_OR4_PRELIM 0xffffe9f7 | |
67431059 AF |
212 | |
213 | /*Chip select 5 - PIB*/ | |
6d0f6bcf JCPV |
214 | #define CONFIG_SYS_BR5_PRELIM 0xf8010801 |
215 | #define CONFIG_SYS_OR5_PRELIM 0xffff69f7 | |
67431059 | 216 | |
6d0f6bcf JCPV |
217 | #define CONFIG_SYS_INIT_RAM_LOCK 1 |
218 | #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ | |
553f0982 | 219 | #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ |
67431059 | 220 | |
25ddd1fb | 221 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
6d0f6bcf | 222 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
67431059 | 223 | |
6d0f6bcf JCPV |
224 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ |
225 | #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ | |
67431059 AF |
226 | |
227 | /* Serial Port */ | |
228 | #define CONFIG_CONS_INDEX 1 | |
6d0f6bcf JCPV |
229 | #define CONFIG_SYS_NS16550 |
230 | #define CONFIG_SYS_NS16550_SERIAL | |
231 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
232 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
67431059 | 233 | |
6d0f6bcf | 234 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
67431059 AF |
235 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} |
236 | ||
6d0f6bcf JCPV |
237 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) |
238 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) | |
67431059 AF |
239 | |
240 | /* Use the HUSH parser*/ | |
6d0f6bcf JCPV |
241 | #define CONFIG_SYS_HUSH_PARSER |
242 | #ifdef CONFIG_SYS_HUSH_PARSER | |
67431059 AF |
243 | #endif |
244 | ||
245 | /* pass open firmware flat tree */ | |
c480861b KG |
246 | #define CONFIG_OF_LIBFDT 1 |
247 | #define CONFIG_OF_BOARD_SETUP 1 | |
248 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
67431059 AF |
249 | |
250 | /* | |
251 | * I2C | |
252 | */ | |
253 | #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ | |
254 | #define CONFIG_HARD_I2C /* I2C with hardware support*/ | |
255 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ | |
c59e4091 | 256 | #define CONFIG_I2C_MULTI_BUS |
6d0f6bcf JCPV |
257 | #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ |
258 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 | |
259 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
260 | #define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ | |
261 | #define CONFIG_SYS_I2C_OFFSET 0x3000 | |
262 | #define CONFIG_SYS_I2C2_OFFSET 0x3100 | |
67431059 AF |
263 | |
264 | /* | |
265 | * General PCI | |
266 | * Memory Addresses are mapped 1-1. I/O is mapped from 0 | |
267 | */ | |
5af0fdd8 | 268 | #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 |
10795f42 | 269 | #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 |
5af0fdd8 | 270 | #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 |
6d0f6bcf | 271 | #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ |
aca5f018 | 272 | #define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000 |
5f91ef6a | 273 | #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 |
6d0f6bcf JCPV |
274 | #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 |
275 | #define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 8M */ | |
276 | ||
3f6f9d76 | 277 | #define CONFIG_SYS_PCIE1_NAME "Slot" |
5af0fdd8 | 278 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 |
10795f42 | 279 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 |
5af0fdd8 | 280 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 |
6d0f6bcf | 281 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ |
aca5f018 | 282 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000 |
5f91ef6a | 283 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 |
6d0f6bcf JCPV |
284 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 |
285 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ | |
286 | ||
5f7bbd13 KG |
287 | #define CONFIG_SYS_SRIO1_MEM_VIRT 0xC0000000 |
288 | #define CONFIG_SYS_SRIO1_MEM_BUS 0xC0000000 | |
289 | #define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BUS | |
290 | #define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ | |
67431059 | 291 | |
da9d4610 AF |
292 | #ifdef CONFIG_QE |
293 | /* | |
294 | * QE UEC ethernet configuration | |
295 | */ | |
296 | #define CONFIG_UEC_ETH | |
297 | #ifndef CONFIG_TSEC_ENET | |
78b7a8ef | 298 | #define CONFIG_ETHPRIME "UEC0" |
da9d4610 AF |
299 | #endif |
300 | #define CONFIG_PHY_MODE_NEED_CHANGE | |
301 | #define CONFIG_eTSEC_MDIO_BUS | |
302 | ||
303 | #ifdef CONFIG_eTSEC_MDIO_BUS | |
53677ef1 | 304 | #define CONFIG_MIIM_ADDRESS 0xE0024520 |
da9d4610 AF |
305 | #endif |
306 | ||
307 | #define CONFIG_UEC_ETH1 /* GETH1 */ | |
308 | ||
309 | #ifdef CONFIG_UEC_ETH1 | |
6d0f6bcf JCPV |
310 | #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ |
311 | #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE | |
312 | #define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 | |
313 | #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH | |
314 | #define CONFIG_SYS_UEC1_PHY_ADDR 7 | |
865ff856 | 315 | #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID |
582c55a0 | 316 | #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000 |
da9d4610 AF |
317 | #endif |
318 | ||
319 | #define CONFIG_UEC_ETH2 /* GETH2 */ | |
320 | ||
321 | #ifdef CONFIG_UEC_ETH2 | |
6d0f6bcf JCPV |
322 | #define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */ |
323 | #define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE | |
324 | #define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 | |
325 | #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH | |
326 | #define CONFIG_SYS_UEC2_PHY_ADDR 1 | |
865ff856 | 327 | #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID |
582c55a0 | 328 | #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000 |
da9d4610 AF |
329 | #endif |
330 | #endif /* CONFIG_QE */ | |
331 | ||
f30ad49b HW |
332 | #if defined(CONFIG_PCI) |
333 | ||
53677ef1 | 334 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
f30ad49b | 335 | |
67431059 AF |
336 | #undef CONFIG_EEPRO100 |
337 | #undef CONFIG_TULIP | |
338 | ||
339 | #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
6d0f6bcf | 340 | #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ |
67431059 AF |
341 | |
342 | #endif /* CONFIG_PCI */ | |
343 | ||
da9d4610 AF |
344 | #if defined(CONFIG_TSEC_ENET) |
345 | ||
67431059 | 346 | #define CONFIG_MII 1 /* MII PHY management */ |
255a3577 KP |
347 | #define CONFIG_TSEC1 1 |
348 | #define CONFIG_TSEC1_NAME "eTSEC0" | |
349 | #define CONFIG_TSEC2 1 | |
350 | #define CONFIG_TSEC2_NAME "eTSEC1" | |
67431059 AF |
351 | |
352 | #define TSEC1_PHY_ADDR 2 | |
353 | #define TSEC2_PHY_ADDR 3 | |
354 | ||
355 | #define TSEC1_PHYIDX 0 | |
356 | #define TSEC2_PHYIDX 0 | |
357 | ||
3a79013e AF |
358 | #define TSEC1_FLAGS TSEC_GIGABIT |
359 | #define TSEC2_FLAGS TSEC_GIGABIT | |
360 | ||
b96c83d4 | 361 | /* Options are: eTSEC[0-1] */ |
67431059 AF |
362 | #define CONFIG_ETHPRIME "eTSEC0" |
363 | ||
364 | #endif /* CONFIG_TSEC_ENET */ | |
365 | ||
366 | /* | |
367 | * Environment | |
368 | */ | |
5a1aceb0 | 369 | #define CONFIG_ENV_IS_IN_FLASH 1 |
6d0f6bcf | 370 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) |
0e8d1586 JCPV |
371 | #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ |
372 | #define CONFIG_ENV_SIZE 0x2000 | |
67431059 AF |
373 | |
374 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
6d0f6bcf | 375 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
67431059 | 376 | |
2835e518 | 377 | |
079a136c JL |
378 | /* |
379 | * BOOTP options | |
380 | */ | |
381 | #define CONFIG_BOOTP_BOOTFILESIZE | |
382 | #define CONFIG_BOOTP_BOOTPATH | |
383 | #define CONFIG_BOOTP_GATEWAY | |
384 | #define CONFIG_BOOTP_HOSTNAME | |
385 | ||
386 | ||
2835e518 JL |
387 | /* |
388 | * Command line configuration. | |
389 | */ | |
390 | #include <config_cmd_default.h> | |
391 | ||
392 | #define CONFIG_CMD_PING | |
393 | #define CONFIG_CMD_I2C | |
394 | #define CONFIG_CMD_MII | |
82ac8c97 | 395 | #define CONFIG_CMD_ELF |
1c9aa76b KG |
396 | #define CONFIG_CMD_IRQ |
397 | #define CONFIG_CMD_SETEXPR | |
199e262e | 398 | #define CONFIG_CMD_REGINFO |
2835e518 | 399 | |
67431059 | 400 | #if defined(CONFIG_PCI) |
2835e518 | 401 | #define CONFIG_CMD_PCI |
67431059 | 402 | #endif |
2835e518 | 403 | |
67431059 AF |
404 | |
405 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
406 | ||
407 | /* | |
408 | * Miscellaneous configurable options | |
409 | */ | |
6d0f6bcf | 410 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
5be58f5f KP |
411 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
412 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
6d0f6bcf JCPV |
413 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
414 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
2835e518 | 415 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 416 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
67431059 | 417 | #else |
6d0f6bcf | 418 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
67431059 | 419 | #endif |
6d0f6bcf JCPV |
420 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
421 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
422 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
423 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ | |
67431059 AF |
424 | |
425 | /* | |
426 | * For booting Linux, the board info and command line data | |
a832ac41 | 427 | * have to be in the first 64 MB of memory, since this is |
67431059 AF |
428 | * the maximum mapped by the Linux kernel during initialization. |
429 | */ | |
a832ac41 KG |
430 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ |
431 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
67431059 | 432 | |
2835e518 | 433 | #if defined(CONFIG_CMD_KGDB) |
67431059 AF |
434 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
435 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
436 | #endif | |
437 | ||
438 | /* | |
439 | * Environment Configuration | |
440 | */ | |
441 | ||
442 | /* The mac addresses for all ethernet interface */ | |
da9d4610 AF |
443 | #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH) |
444 | #define CONFIG_HAS_ETH0 | |
67431059 AF |
445 | #define CONFIG_ETHADDR 00:E0:0C:00:00:FD |
446 | #define CONFIG_HAS_ETH1 | |
447 | #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD | |
448 | #define CONFIG_HAS_ETH2 | |
449 | #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD | |
da9d4610 AF |
450 | #define CONFIG_HAS_ETH3 |
451 | #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD | |
67431059 AF |
452 | #endif |
453 | ||
454 | #define CONFIG_IPADDR 192.168.1.253 | |
455 | ||
456 | #define CONFIG_HOSTNAME unknown | |
8b3637c6 | 457 | #define CONFIG_ROOTPATH "/nfsroot" |
b3f44c21 | 458 | #define CONFIG_BOOTFILE "your.uImage" |
67431059 AF |
459 | |
460 | #define CONFIG_SERVERIP 192.168.1.1 | |
461 | #define CONFIG_GATEWAYIP 192.168.1.1 | |
462 | #define CONFIG_NETMASK 255.255.255.0 | |
463 | ||
464 | #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ | |
465 | ||
466 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
467 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ | |
468 | ||
469 | #define CONFIG_BAUDRATE 115200 | |
470 | ||
471 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
472 | "netdev=eth0\0" \ | |
473 | "consoledev=ttyS0\0" \ | |
474 | "ramdiskaddr=600000\0" \ | |
475 | "ramdiskfile=your.ramdisk.u-boot\0" \ | |
476 | "fdtaddr=400000\0" \ | |
477 | "fdtfile=your.fdt.dtb\0" \ | |
478 | "nfsargs=setenv bootargs root=/dev/nfs rw " \ | |
479 | "nfsroot=$serverip:$rootpath " \ | |
480 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
481 | "console=$consoledev,$baudrate $othbootargs\0" \ | |
482 | "ramargs=setenv bootargs root=/dev/ram rw " \ | |
483 | "console=$consoledev,$baudrate $othbootargs\0" \ | |
484 | ||
485 | ||
486 | #define CONFIG_NFSBOOTCOMMAND \ | |
487 | "run nfsargs;" \ | |
488 | "tftp $loadaddr $bootfile;" \ | |
489 | "tftp $fdtaddr $fdtfile;" \ | |
490 | "bootm $loadaddr - $fdtaddr" | |
491 | ||
492 | ||
493 | #define CONFIG_RAMBOOTCOMMAND \ | |
494 | "run ramargs;" \ | |
495 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
496 | "tftp $loadaddr $bootfile;" \ | |
497 | "bootm $loadaddr $ramdiskaddr" | |
498 | ||
499 | #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND | |
500 | ||
501 | #endif /* __CONFIG_H */ |