]>
Commit | Line | Data |
---|---|---|
b4676a25 WD |
1 | /* |
2 | * (C) Copyright 2001 | |
3 | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
4 | * | |
5 | * See file CREDITS for list of people who contributed to this | |
6 | * project. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License as | |
10 | * published by the Free Software Foundation; either version 2 of | |
11 | * the License, or (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
21 | * MA 02111-1307 USA | |
22 | */ | |
23 | ||
24 | ||
25 | #ifndef __CONFIG_H | |
26 | #define __CONFIG_H | |
27 | ||
28 | #define MV_VERSION "v0.2.0" | |
29 | ||
30 | /* LED0 = Power , LED1 = Error , LED2-5 = error code, LED6-7=00 -->PPCBoot error */ | |
53677ef1 WD |
31 | #define ERR_NONE 0 |
32 | #define ERR_ENV 1 | |
33 | #define ERR_BOOTM_BADMAGIC 2 | |
34 | #define ERR_BOOTM_BADCRC 3 | |
35 | #define ERR_BOOTM_GUNZIP 4 | |
b4676a25 | 36 | #define ERR_BOOTP_TIMEOUT 5 |
53677ef1 WD |
37 | #define ERR_DHCP 6 |
38 | #define ERR_TFTP 7 | |
39 | #define ERR_NOLAN 8 | |
40 | #define ERR_LANDRV 9 | |
b4676a25 WD |
41 | |
42 | #define CONFIG_BOARD_TYPES 1 | |
43 | #define MVBLUE_BOARD_BOX 1 | |
44 | #define MVBLUE_BOARD_LYNX 2 | |
45 | ||
2ae18241 | 46 | #define CONFIG_SYS_TEXT_BASE 0xFFF00000 |
de550d6b | 47 | #define CONFIG_SYS_LDSCRIPT "board/mvblue/u-boot.lds" |
2ae18241 | 48 | |
b4676a25 WD |
49 | #if 0 |
50 | #define ERR_LED(code) do { if (code) \ | |
53677ef1 WD |
51 | *(volatile char *)(0xff000003) = ( 3 | (code<<4) ) & 0xf3; \ |
52 | else \ | |
53 | *(volatile char *)(0xff000003) = ( 1 ); \ | |
54 | } while(0) | |
b4676a25 WD |
55 | #else |
56 | #define ERR_LED(code) | |
57 | #endif | |
58 | ||
b4676a25 WD |
59 | #define CONFIG_MPC824X 1 |
60 | #define CONFIG_MPC8245 1 | |
61 | #define CONFIG_MVBLUE 1 | |
62 | ||
63 | #define CONFIG_CLOCKS_IN_MHZ 1 | |
64 | ||
f2302d44 | 65 | #define CONFIG_BOARD_TYPES 1 |
b4676a25 WD |
66 | |
67 | #define CONFIG_CONS_INDEX 1 | |
68 | #define CONFIG_BAUDRATE 115200 | |
b4676a25 | 69 | |
f2302d44 | 70 | #define CONFIG_BOOTDELAY 3 |
b4676a25 WD |
71 | #define CONFIG_BOOT_RETRY_TIME -1 |
72 | ||
73 | #define CONFIG_AUTOBOOT_KEYED | |
f2302d44 SR |
74 | #define CONFIG_AUTOBOOT_PROMPT \ |
75 | "autoboot in %d seconds (stop with 's')...\n", bootdelay | |
d4ca31c4 | 76 | #define CONFIG_AUTOBOOT_STOP_STR "s" |
b4676a25 WD |
77 | #define CONFIG_ZERO_BOOTDELAY_CHECK |
78 | #define CONFIG_RESET_TO_RETRY 60 | |
79 | ||
b4676a25 | 80 | |
8353e139 JL |
81 | /* |
82 | * Command line configuration. | |
83 | */ | |
b4676a25 | 84 | |
8353e139 JL |
85 | #define CONFIG_CMD_ASKENV |
86 | #define CONFIG_CMD_BOOTD | |
87 | #define CONFIG_CMD_CACHE | |
88 | #define CONFIG_CMD_DHCP | |
89 | #define CONFIG_CMD_ECHO | |
bdab39d3 | 90 | #define CONFIG_CMD_SAVEENV |
8353e139 JL |
91 | #define CONFIG_CMD_FLASH |
92 | #define CONFIG_CMD_IMI | |
8353e139 JL |
93 | #define CONFIG_CMD_NET |
94 | #define CONFIG_CMD_PCI | |
95 | #define CONFIG_CMD_RUN | |
b4676a25 | 96 | |
8353e139 | 97 | |
7be044e4 JL |
98 | /* |
99 | * BOOTP options | |
100 | */ | |
101 | #define CONFIG_BOOTP_SUBNETMASK | |
102 | #define CONFIG_BOOTP_GATEWAY | |
103 | #define CONFIG_BOOTP_HOSTNAME | |
104 | #define CONFIG_BOOTP_BOOTPATH | |
105 | #define CONFIG_BOOTP_BOOTFILESIZE | |
106 | #define CONFIG_BOOTP_SUBNETMASK | |
107 | #define CONFIG_BOOTP_GATEWAY | |
108 | #define CONFIG_BOOTP_HOSTNAME | |
109 | #define CONFIG_BOOTP_NISDOMAIN | |
110 | #define CONFIG_BOOTP_BOOTPATH | |
111 | #define CONFIG_BOOTP_DNS | |
112 | #define CONFIG_BOOTP_DNS2 | |
113 | #define CONFIG_BOOTP_SEND_HOSTNAME | |
114 | #define CONFIG_BOOTP_NTPSERVER | |
115 | #define CONFIG_BOOTP_TIMEOFFSET | |
116 | ||
b4676a25 WD |
117 | |
118 | /* | |
119 | * Miscellaneous configurable options | |
120 | */ | |
6d0f6bcf JCPV |
121 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
122 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
123 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
b4676a25 | 124 | |
6d0f6bcf JCPV |
125 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
126 | #define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ | |
127 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
128 | #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ | |
b4676a25 | 129 | |
53677ef1 | 130 | #define CONFIG_BOOTCOMMAND "run nfsboot" |
b4676a25 WD |
131 | #define CONFIG_BOOTARGS "root=/dev/mtdblock5 ro rootfstype=jffs2" |
132 | ||
53677ef1 | 133 | #define CONFIG_NFSBOOTCOMMAND "bootp; run nfsargs addcons;bootm" |
b4676a25 | 134 | |
d4ca31c4 WD |
135 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
136 | "console_nr=0\0" \ | |
137 | "dhcp_client_id=mvBOX-XP\0" \ | |
138 | "dhcp_vendor-class-identifier=mvBOX\0" \ | |
139 | "adminboot=setenv bootargs root=/dev/mtdblock5 rw rootfstype=jffs2;run addcons;bootm ffc00000\0" \ | |
140 | "flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0" \ | |
141 | "safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0" \ | |
142 | "hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0" \ | |
fe126d8b WD |
143 | "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ |
144 | "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ | |
145 | "addcons=setenv bootargs ${bootargs} console=ttyS${console_nr},${baudrate}N8\0" \ | |
b4676a25 | 146 | "mv_version=" MV_VERSION "\0" \ |
d4ca31c4 | 147 | "bootretry=30\0" |
b4676a25 WD |
148 | |
149 | #define CONFIG_OVERWRITE_ETHADDR_ONCE | |
150 | ||
151 | /*----------------------------------------------------------------------- | |
152 | * PCI stuff | |
153 | *----------------------------------------------------------------------- | |
154 | */ | |
155 | ||
d4ca31c4 | 156 | #define CONFIG_PCI |
842033e6 | 157 | #define CONFIG_PCI_INDIRECT_BRIDGE |
b4676a25 WD |
158 | #define CONFIG_PCI_PNP |
159 | #define CONFIG_PCI_SCAN_SHOW | |
160 | ||
53677ef1 | 161 | #define CONFIG_NET_RETRY_COUNT 5 |
b4676a25 WD |
162 | |
163 | #define CONFIG_TULIP | |
164 | #define CONFIG_TULIP_FIX_DAVICOM 1 | |
53677ef1 | 165 | #define CONFIG_ETHADDR b6:b4:45:eb:fb:c0 |
b4676a25 WD |
166 | |
167 | #define CONFIG_HW_WATCHDOG | |
168 | ||
169 | /*----------------------------------------------------------------------- | |
170 | * Start addresses for the final memory configuration | |
171 | * (Set up by the startup code) | |
6d0f6bcf | 172 | * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
b4676a25 | 173 | */ |
6d0f6bcf | 174 | #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
b4676a25 | 175 | |
6d0f6bcf | 176 | #define CONFIG_SYS_FLASH_BASE 0xFFF00000 |
14d0a02a | 177 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
b4676a25 | 178 | |
6d0f6bcf JCPV |
179 | #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 |
180 | #define CONFIG_SYS_EUMB_ADDR 0xFC000000 | |
b4676a25 | 181 | |
6d0f6bcf JCPV |
182 | #define CONFIG_SYS_MONITOR_LEN 0x00100000 |
183 | #define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */ | |
b4676a25 | 184 | |
6d0f6bcf JCPV |
185 | #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ |
186 | #define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */ | |
b4676a25 WD |
187 | |
188 | /* Maximum amount of RAM. */ | |
6d0f6bcf | 189 | #define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 0 .. 256MB of (S)DRAM */ |
b4676a25 WD |
190 | |
191 | ||
6d0f6bcf JCPV |
192 | #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE |
193 | #undef CONFIG_SYS_RAMBOOT | |
b4676a25 | 194 | #else |
6d0f6bcf | 195 | #define CONFIG_SYS_RAMBOOT |
b4676a25 WD |
196 | #endif |
197 | ||
6d0f6bcf | 198 | #define CONFIG_SYS_ISA_IO 0xFE000000 |
b4676a25 WD |
199 | |
200 | /* | |
201 | * serial configuration | |
202 | */ | |
6d0f6bcf JCPV |
203 | #define CONFIG_SYS_NS16550 |
204 | #define CONFIG_SYS_NS16550_SERIAL | |
b4676a25 | 205 | |
6d0f6bcf | 206 | #define CONFIG_SYS_NS16550_REG_SIZE 1 |
b4676a25 | 207 | |
6d0f6bcf | 208 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) |
b4676a25 | 209 | |
6d0f6bcf JCPV |
210 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500) |
211 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600) | |
b4676a25 WD |
212 | |
213 | /*----------------------------------------------------------------------- | |
214 | * Definitions for initial stack pointer and data area | |
215 | */ | |
6d0f6bcf | 216 | #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 |
553f0982 | 217 | #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 |
25ddd1fb | 218 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
b4676a25 WD |
219 | |
220 | /* | |
221 | * Low Level Configuration Settings | |
222 | * (address mappings, register initial values, etc.) | |
223 | * You should know what you are doing if you make changes here. | |
224 | * For the detail description refer to the MPC8240 user's manual. | |
225 | */ | |
226 | ||
d4ca31c4 | 227 | #define CONFIG_SYS_CLK_FREQ 33000000 |
6d0f6bcf | 228 | #define CONFIG_SYS_HZ 10000 |
b4676a25 WD |
229 | |
230 | /* Bit-field values for MCCR1. */ | |
6d0f6bcf JCPV |
231 | #define CONFIG_SYS_ROMNAL 7 |
232 | #define CONFIG_SYS_ROMFAL 11 | |
b4676a25 WD |
233 | |
234 | /* Bit-field values for MCCR2. */ | |
6d0f6bcf JCPV |
235 | #define CONFIG_SYS_TSWAIT 0x5 |
236 | #define CONFIG_SYS_REFINT 430 | |
b4676a25 WD |
237 | |
238 | /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ | |
6d0f6bcf | 239 | #define CONFIG_SYS_BSTOPRE 121 |
b4676a25 WD |
240 | |
241 | /* Bit-field values for MCCR3. */ | |
6d0f6bcf | 242 | #define CONFIG_SYS_REFREC 8 |
b4676a25 WD |
243 | |
244 | /* Bit-field values for MCCR4. */ | |
6d0f6bcf JCPV |
245 | #define CONFIG_SYS_PRETOACT 3 |
246 | #define CONFIG_SYS_ACTTOPRE 5 | |
247 | #define CONFIG_SYS_ACTORW 3 | |
248 | #define CONFIG_SYS_SDMODE_CAS_LAT 3 | |
249 | #define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 | |
250 | #define CONFIG_SYS_EXTROM 1 | |
251 | #define CONFIG_SYS_REGDIMM 0 | |
252 | #define CONFIG_SYS_DBUS_SIZE2 1 | |
253 | #define CONFIG_SYS_SDMODE_WRAP 0 | |
254 | ||
255 | #define CONFIG_SYS_PGMAX 0x32 | |
256 | #define CONFIG_SYS_SDRAM_DSCD 0x20 | |
b4676a25 WD |
257 | |
258 | /* Memory bank settings. | |
259 | * Only bits 20-29 are actually used from these vales to set the | |
260 | * start/end addresses. The upper two bits will always be 0, and the lower | |
261 | * 20 bits will be 0x00000 for a start address, or 0xfffff for an end | |
262 | * address. Refer to the MPC8240 book. | |
263 | */ | |
264 | ||
6d0f6bcf JCPV |
265 | #define CONFIG_SYS_BANK0_START 0x00000000 |
266 | #define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) | |
267 | #define CONFIG_SYS_BANK0_ENABLE 1 | |
268 | #define CONFIG_SYS_BANK1_START 0x3ff00000 | |
269 | #define CONFIG_SYS_BANK1_END 0x3fffffff | |
270 | #define CONFIG_SYS_BANK1_ENABLE 0 | |
271 | #define CONFIG_SYS_BANK2_START 0x3ff00000 | |
272 | #define CONFIG_SYS_BANK2_END 0x3fffffff | |
273 | #define CONFIG_SYS_BANK2_ENABLE 0 | |
274 | #define CONFIG_SYS_BANK3_START 0x3ff00000 | |
275 | #define CONFIG_SYS_BANK3_END 0x3fffffff | |
276 | #define CONFIG_SYS_BANK3_ENABLE 0 | |
277 | #define CONFIG_SYS_BANK4_START 0x3ff00000 | |
278 | #define CONFIG_SYS_BANK4_END 0x3fffffff | |
279 | #define CONFIG_SYS_BANK4_ENABLE 0 | |
280 | #define CONFIG_SYS_BANK5_START 0x3ff00000 | |
281 | #define CONFIG_SYS_BANK5_END 0x3fffffff | |
282 | #define CONFIG_SYS_BANK5_ENABLE 0 | |
283 | #define CONFIG_SYS_BANK6_START 0x3ff00000 | |
284 | #define CONFIG_SYS_BANK6_END 0x3fffffff | |
285 | #define CONFIG_SYS_BANK6_ENABLE 0 | |
286 | #define CONFIG_SYS_BANK7_START 0x3ff00000 | |
287 | #define CONFIG_SYS_BANK7_END 0x3fffffff | |
288 | #define CONFIG_SYS_BANK7_ENABLE 0 | |
289 | ||
290 | #define CONFIG_SYS_ODCR 0xff | |
291 | ||
292 | #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) | |
293 | #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) | |
294 | ||
295 | #define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) | |
296 | #define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) | |
297 | ||
298 | #define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) | |
299 | #define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) | |
300 | ||
301 | #define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) | |
302 | #define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) | |
303 | ||
304 | #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L | |
305 | #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U | |
306 | #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L | |
307 | #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U | |
308 | #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L | |
309 | #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U | |
310 | #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L | |
311 | #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U | |
b4676a25 WD |
312 | |
313 | /* | |
314 | * For booting Linux, the board info and command line data | |
315 | * have to be in the first 8 MB of memory, since this is | |
316 | * the maximum mapped by the Linux kernel during initialization. | |
317 | */ | |
6d0f6bcf | 318 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
b4676a25 WD |
319 | |
320 | /*----------------------------------------------------------------------- | |
321 | * FLASH organization | |
322 | */ | |
6d0f6bcf JCPV |
323 | #undef CONFIG_SYS_FLASH_PROTECTION |
324 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ | |
325 | #define CONFIG_SYS_MAX_FLASH_SECT 63 /* Max number of sectors per flash */ | |
b4676a25 | 326 | |
6d0f6bcf JCPV |
327 | #define CONFIG_SYS_FLASH_ERASE_TOUT 12000 |
328 | #define CONFIG_SYS_FLASH_WRITE_TOUT 1000 | |
b4676a25 WD |
329 | |
330 | ||
5a1aceb0 | 331 | #define CONFIG_ENV_IS_IN_FLASH |
b4676a25 | 332 | |
0e8d1586 JCPV |
333 | #define CONFIG_ENV_OFFSET 0x00010000 |
334 | #define CONFIG_ENV_SIZE 0x00010000 | |
335 | #define CONFIG_ENV_SECT_SIZE 0x00010000 | |
b4676a25 WD |
336 | |
337 | /*----------------------------------------------------------------------- | |
338 | * Cache Configuration | |
339 | */ | |
6d0f6bcf | 340 | #define CONFIG_SYS_CACHELINE_SIZE 32 |
8353e139 | 341 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 342 | #define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ |
b4676a25 | 343 | #endif |
b4676a25 | 344 | #endif /* __CONFIG_H */ |